Subversion Repositories openrisc_2011-10-31

/*-------------------------------------------------------------------------+
| start.s v1.1 - PC386 BSP - 1997/08/07
+--------------------------------------------------------------------------+
| This file contains the entry point for the application.
| The name of this entry point is compiler dependent.
| It jumps to the BSP which is responsible for performing all initialization.
+--------------------------------------------------------------------------+
| (C) Copyright 1997 -
| - NavIST Group - Real-Time Distributed Systems and Industrial Automation
|
| http://pandora.ist.utl.pt
|
| Instituto Superior Tecnico * Lisboa * PORTUGAL
+--------------------------------------------------------------------------+
| Modified the 20/05/1998  by valette@crf.canon.fr in order to give a working
| example of eraly stage debugging via the DEBUG_EARLY_START define.
+--------------------------------------------------------------------------+
| Disclaimer:
|
| This file is provided "AS IS" without warranty of any kind, either
| expressed or implied.
+--------------------------------------------------------------------------+
| This code is based on an earlier generation RTEMS i386 start.s and the
| following copyright applies:
|
| **************************************************************************
| *  COPYRIGHT (c) 1989-1999.
| *  On-Line Applications Research Corporation (OAR). 
| *
| *  The license and distribution terms for this file may be
| *  found in the file LICENSE in this distribution or at
| *  http://www.OARcorp.com/rtems/license.html.
| **************************************************************************
|
|  $Id: start.S,v 1.2 2001-09-27 11:59:48 chris Exp $
+--------------------------------------------------------------------------*/

/*
 * The most trivial start.s possible. It does not know anything
 * about system it is running on, so it will jump to appropriate
 * place in BSP specific place to do things it knows nothing about
 */

#include "asm.h"

/*----------------------------------------------------------------------------+
| Size of heap and stack:       
+----------------------------------------------------------------------------*/

.set STACK_SIZE, 0x1000

/*----------------------------------------------------------------------------+
| CODE section
+----------------------------------------------------------------------------*/

BEGIN_CODE

        PUBLIC (start)          # GNU default entry point

        EXTERN (boot_card)
        EXTERN (_load_segments)
        EXTERN (_return_to_monitor)
        EXTERN (_IBMPC_initVideo)
        EXTERN (debugPollingGetChar)
        EXTERN (checkCPUtypeSetCr0)
        

/*
 * In case this crashes on your machine and this is not due
 * to video mode set by the loader, you may try to define
 * the following variable:
 */
/* #define DEBUG_EARLY_START */

SYM (start):
        /*
         *  When things are really, REALLY!, bad -- turn on the speaker and
         *  lock up.  This shows whether or not we make it to a certain 
         *  location.
         */
#if 0
        inb     $0x61, al
        orb     $0x03, al
        outb    al, $0x61       # enable the speaker
speakl: jmp     speakl             # and SPIN!!!
#endif

        nop
        cli                     # DISABLE INTERRUPTS!!!
        cld
#ifdef DEBUG_EARLY_START
        /*
         * Must get video attribute to have a working printk.
         * Note that the following code assume we already have 
         * valid segments and a stack. It should be true for
         * any loader starting RTEMS in protected mode (or
         * at least I hope so : -)).
         */
        call _IBMPC_initVideo
        /*
         * try printk and a getchar in polling mode ASAP
         */
        pushl   $welcome_msg
        call    printk
        addl    $4, esp

        /* call debugPollingGetChar */
        
#endif  

/*----------------------------------------------------------------------------+
| Load the segment registers (this is done by the board's BSP) and perform any
| other board specific initialization procedures, this piece of code
| does not know anything about 
|
| NOTE: Upon return, gs will contain the segment descriptor for a segment which
|       maps directly to all of physical memory.
+----------------------------------------------------------------------------*/

        jmp     SYM (_load_segments)    # load board dependent segments

/*----------------------------------------------------------------------------+
| Set up the stack
+----------------------------------------------------------------------------*/

        PUBLIC (_establish_stack)
SYM (_establish_stack):

        movl    $_end, eax              # eax = end of bss/start of heap
        addl    $STACK_SIZE, eax        # make room for stack
        andl    $0xffffffc0, eax        # align it on 16 byte boundary
        movl    eax, esp                # set stack pointer
        movl    eax, ebp                # set base pointer

/*----------------------------------------------------------------------------+
| Zero out the BSS segment
+----------------------------------------------------------------------------*/

SYM (zero_bss):
        cld                             # make direction flag count up
        movl    $ SYM (_end), ecx       # find end of .bss
        movl    $ SYM (_bss_start), edi # edi = beginning of .bss
        subl    edi, ecx                # ecx = size of .bss in bytes
        shrl    ecx                     # size of .bss in longs
        shrl    ecx
        xorl    eax, eax                # value to clear out memory
        repne                           # while ecx != 0
        stosl                           #   clear a long in the bss

/*---------------------------------------------------------------------+
| Check CPU type. Enable Cache and init coprocessor if needed.
+---------------------------------------------------------------------*/
        call checkCPUtypeSetCr0
/*---------------------------------------------------------------------+
| Transfer control to User's Board Support Package
+---------------------------------------------------------------------*/

        pushl   $0                      # environp
        pushl   $0                      # argv
        pushl   $0                      # argc
        call    SYM (boot_card)
        addl    $12, esp

/*---------------------------------------------------------------------+
| Clean up - we do not know anything about it, so we will
| jump to BSP specific code to do cleanup
+---------------------------------------------------------------------*/

        jmp     SYM (_return_to_monitor)

END_CODE

BEGIN_DATA

        PUBLIC(_stack_size)
SYM(_stack_size):
        .long STACK_SIZE

#ifdef DEBUG_EARLY_START

        PUBLIC (welcome_msg)
SYM (welcome_msg) :
        .string "Ready to debug RTEMS ?\nEnter <CR>\n"

        PUBLIC (hex_msg)
SYM (hex_msg) :
        .string "0x%x\n"

        PUBLIC (made_it_msg)
SYM (made_it_msg) :
        .string "made it to %d\n"

#endif

END_DATA

END