URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [m68k/] [gen68340/] [include/] [m68340.h] - Rev 30
Go to most recent revision | Compare with Previous | Blame | View Log
/********************************************************************** * MC68340 C Header File * * * * Developed by : Motorola * * High Performance Embedded Systems Division * * Austin, TX * * Rectified by : Geoffroy Montel * g_montel@yahoo.com * * * **********************************************************************/ typedef volatile unsigned char * portb; /* 8-bit port */ typedef volatile unsigned short * portw; /* 16-bit port */ typedef volatile unsigned int * portl; /* 32-bit port */ #define MBASE 0xEFFFF000 /* Module Base Address */ /* not EFFFF000 due to a 68349 hardware incompatibility */ #define MBAR (*(portb) 0x0003FF00) /* Module Base Addr Reg */ #define MBAR1 (*(portb) 0x0003FF00) /* Module Base Addr Reg 1 (MSW) */ #define MBAR2 (*(portb) 0x0003FF02) /* Module Base Addr Reg 2 (LSW) */ /* System Integration Module */ #define SIMMCR (*(portw) (MBASE+0x0000)) /* SIM Module Config Reg */ #define SIMSYNCR (*(portw) (MBASE+0x0004)) /* SIM Clock Synth Cont Reg */ #define SIMAVR (*(portb) (MBASE+0x0006)) /* SIM Autovector Reg */ #define SIMRSR (*(portb) (MBASE+0x0007)) /* SIM Reset Status Reg */ #define SIMPORTA (*(portb) (MBASE+0x0011)) /* SIM Port A Data Reg */ #define SIMDDRA (*(portb) (MBASE+0x0013)) /* SIM Port A Data Dir Reg */ #define SIMPPRA1 (*(portb) (MBASE+0x0015)) /* SIM Port A Pin Asm 1 Reg */ #define SIMPPRA2 (*(portb) (MBASE+0x0017)) /* SIM Port A Pin Asm 2 Reg */ #define SIMPORTB (*(portb) (MBASE+0x0019)) /* SIM Port B Data Reg */ #define SIMPORTB1 (*(portb) (MBASE+0x001B)) /* SIM Port B Data Reg */ #define SIMDDRB (*(portb) (MBASE+0x001D)) /* SIM Port B Data Dir Reg */ #define SIMPPARB (*(portb) (MBASE+0x001F)) /* SIM Port B Pin Asm Reg */ #define SIMSWIV (*(portb) (MBASE+0x0020)) /* SIM SW Interrupt Vector */ #define SIMSYPCR (*(portb) (MBASE+0x0021)) /* SIM System Prot Cont Reg */ #define SIMPICR (*(portw) (MBASE+0x0022)) /* SIM Period Intr Cont Reg */ #define SIMPITR (*(portw) (MBASE+0x0024)) /* SIM Period Intr Tmg Reg */ #define SIMSWSR (*(portb) (MBASE+0x0027)) /* SIM Software Service Reg */ #define SIMCS0AM (*(portl) (MBASE+0x0040)) /* SIM Chp Sel 0 Addr Msk */ #define SIMCS0AM1 (*(portw) (MBASE+0x0040)) /* SIM Chp Sel 0 Addr Msk 1 */ #define SIMCS0AM2 (*(portw) (MBASE+0x0042)) /* SIM Chp Sel 0 Addr Msk 2 */ #define SIMCS0BA (*(portl) (MBASE+0x0044)) /* SIM Chp Sel 0 Base Addr */ #define SIMCS0BA1 (*(portw) (MBASE+0x0044)) /* SIM Chp Sel 0 Bas Addr 1 */ #define SIMCS0BA2 (*(portw) (MBASE+0x0046)) /* SIM Chp Sel 0 Bas Addr 2 */ #define SIMCS1AM (*(portl) (MBASE+0x0048)) /* SIM Chp Sel 1 Adress Msk */ #define SIMCS1AM1 (*(portw) (MBASE+0x0048)) /* SIM Chp Sel 1 Addr Msk 1 */ #define SIMCS1AM2 (*(portw) (MBASE+0x004A)) /* SIM Chp Sel 1 Addr Msk 2 */ #define SIMCS1BA (*(portl) (MBASE+0x004C)) /* SIM Chp Sel 1 Base Addr */ #define SIMCS1BA1 (*(portw) (MBASE+0x004C)) /* SIM Chp Sel 1 Bas Addr 1 */ #define SIMCS1BA2 (*(portw) (MBASE+0x004E)) /* SIM Chp Sel 1 Bas Addr 2 */ #define SIMCS2AM (*(portl) (MBASE+0x0050)) /* SIM Chp Sel 2 Addr Msk */ #define SIMCS2AM1 (*(portw) (MBASE+0x0050)) /* SIM Chp Sel 2 Addr Msk 1 */ #define SIMCS2AM2 (*(portw) (MBASE+0x0052)) /* SIM Chp Sel 2 Addr Msk 2 */ #define SIMCS2BA (*(portl) (MBASE+0x0054)) /* SIM Chp Sel 2 Base Addr */ #define SIMCS2BA1 (*(portw) (MBASE+0x0054)) /* SIM Chp Sel 2 Bas Addr 1 */ #define SIMCS2BA2 (*(portw) (MBASE+0x0056)) /* SIM Chp Sel 2 Bas Addr 2 */ #define SIMCS3AM (*(portl) (MBASE+0x0058)) /* SIM Chp Sel 3 Addr Msk */ #define SIMCS3AM1 (*(portw) (MBASE+0x0058)) /* SIM Chp Sel 3 Addr Msk 1 */ #define SIMCS3AM2 (*(portw) (MBASE+0x005A)) /* SIM Chp Sel 3 Addr Msk 2 */ #define SIMCS3BA (*(portl) (MBASE+0x005C)) /* SIM Chp Sel 3 Base Addr */ #define SIMCS3BA1 (*(portw) (MBASE+0x005C)) /* SIM Chp Sel 3 Bas Addr 1 */ #define SIMCS3BA2 (*(portw) (MBASE+0x005E)) /* SIM Chp Sel 3 Bas Addr 2 */ /* Dynamic Memory Access (DMA) Module */ #define DMAMCR1 (*(portw) (MBASE+0x0780)) /* DMA Module Config Reg 1 */ #define DMAINTR1 (*(portw) (MBASE+0x0784)) /* DMA Interrupt Reg 1 */ #define DMACCR1 (*(portw) (MBASE+0x0788)) /* DMA Channel Cont Reg 1 */ #define DMACSR1 (*(portb) (MBASE+0x078A)) /* DMA Channel Status Reg 1 */ #define DMAFCR1 (*(portb) (MBASE+0x078B)) /* DMA Function Code Reg 1 */ #define DMASAR1 (*(portl) (MBASE+0x078C)) /* DMA DMA Src Addr Reg 1 */ #define DMADAR1 (*(portl) (MBASE+0x0790)) /* DMA Dest Addr Reg 1 */ #define DMABTC1 (*(portb) (MBASE+0x079l)) /* DMA Byte Trans Cnt Reg 1 */ #define DMAMCR2 (*(portw) (MBASE+0x07A0)) /* DMA Module Config Reg 2 */ #define DMAINTR2 (*(portw) (MBASE+0x07A4)) /* DMA Interrupt Reg 2 */ #define DMACCR2 (*(portw) (MBASE+0x07A8)) /* DMA Channel Cont Reg 2 */ #define DMACSR2 (*(portb) (MBASE+0x07AA)) /* DMA Channel Status Reg 2 */ #define DMAFCR2 (*(portb) (MBASE+0x07AB)) /* DMA Function Code Reg 1 */ #define DMASAR2 (*(portl) (MBASE+0x07AC)) /* DMA Source Addr Reg 2 */ #define DMADAR2 (*(portl) (MBASE+0x07B0)) /* DMA Dest Addr Reg 2 */ #define DMABTC2 (*(portb) (MBASE+0x07B4)) /* DMA Byte Trans Cnt Reg 2 */ /* Dual Serial Module */ #define DUMCRH (*(portb) (MBASE+0x0700)) /* DUART Module Config Reg */ #define DUMCRL (*(portb) (MBASE+0x0701)) /* DUART Module Config Reg */ #define DUILR (*(portb) (MBASE+0x0704)) /* DUART Interrupt Level */ #define DUIVR (*(portb) (MBASE+0x0705)) /* DUART Interrupt Vector */ #define DUMR1A (*(portb) (MBASE+0x0710)) /* DUART Mode Reg 1A */ #define DUSRA (*(portb) (MBASE+0x0711)) /* DUART Status Reg A */ #define DUCSRA (*(portb) (MBASE+0x0711)) /* DUART Clock Sel Reg A */ #define DUCRA (*(portb) (MBASE+0x0712)) /* DUART Command Reg A */ #define DURBA (*(portb) (MBASE+0x0713)) /* DUART Receiver Buffer A */ #define DUTBA (*(portb) (MBASE+0x0713)) /* DUART Transmitter Buff A */ #define DUIPCR (*(portb) (MBASE+0x0714)) /* DUART Input Port Chg Reg */ #define DUACR (*(portb) (MBASE+0x0714)) /* DUART Auxiliary Cont Reg */ #define DUISR (*(portb) (MBASE+0x0715)) /* DUART Interrupt Stat Reg */ #define DUIER (*(portb) (MBASE+0x0715)) /* DUART Interrupt Enb Reg */ #define DUMR1B (*(portb) (MBASE+0x0718)) /* DUART Mode Reg 1B */ #define DUSRB (*(portb) (MBASE+0x0719)) /* DUART Status Reg B */ #define DUCSRB (*(portb) (MBASE+0x0719)) /* DUART Clock Sel Reg B */ #define DUCRB (*(portb) (MBASE+0x071A)) /* DUART Command Reg B */ #define DURBB (*(portb) (MBASE+0x071B)) /* DUART Receiver Buffer B */ #define DUTBB (*(portb) (MBASE+0x071B)) /* DUART Transmitter Buff B */ #define DUIP (*(portb) (MBASE+0x071D)) /* DUART Input Port Reg */ #define DUOPCR (*(portb) (MBASE+0x071D)) /* DUART Outp Port Cnt Reg */ #define DUOPBS (*(portb) (MBASE+0x071E)) /* DUART Outp Port Bit Set */ #define DUOPBR (*(portb) (MBASE+0x071F)) /* DUART Outp Port Bit Rst */ #define DUMR2A (*(portb) (MBASE+0x0720)) /* DUART Mode Reg 2A */ #define DUMR2B (*(portb) (MBASE+0x0721)) /* DUART Mode Reg 2B */ /* Dual Timer Module */ #define TMCR1 (*(portw) (MBASE+0x0600)) /* Timer Module Config Reg 1 */ #define TIR1 (*(portw) (MBASE+0x0604)) /* Timer Interrupt Reg 1 */ #define TCR1 (*(portw) (MBASE+0x0606)) /* Timer Control Reg 1 */ #define TSR1 (*(portw) (MBASE+0x0608)) /* Timer Status Reg 1 */ #define TCNTR1 (*(portw) (MBASE+0x060A)) /* Timer Counter Reg 1 */ #define WPREL11 (*(portw) (MBASE+0x060C)) /* Timer Preload 1 Reg 1 */ #define WPREL21 (*(portw) (MBASE+0x060E)) /* Timer Preload 2 Reg 1 */ #define TCOM1 (*(portw) (MBASE+0x0610)) /* Timer Compare Reg 1 */ #define TMCR2 (*(portw) (MBASE+0x0640)) /* Timer Module Config Reg 2 */ #define TIR2 (*(portw) (MBASE+0x0644)) /* Timer Interrupt Reg 2 */ #define TCR2 (*(portw) (MBASE+0x0646)) /* Timer Control Reg 2 */ #define TSR2 (*(portw) (MBASE+0x0648)) /* Timer Status Reg 2 */ #define TCNTR2 (*(portw) (MBASE+0x064A)) /* Timer Counter Reg 2 */ #define WPREL12 (*(portw) (MBASE+0x064C)) /* Timer Preload 1 Reg 2 */ #define WPREL22 (*(portw) (MBASE+0x064E)) /* Timer Preload 2 Reg 2 */ #define TCOM2 (*(portw) (MBASE+0x0650)) /* Timer Compare Reg 2 */
Go to most recent revision | Compare with Previous | Blame | View Log