OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [m68k/] [mvme147/] [README] - Rev 30

Go to most recent revision | Compare with Previous | Blame | View Log

#
#  $Id: README,v 1.2 2001-09-27 12:00:15 chris Exp $
#

Notes about the MVME147 bsp

MVME147 port for TNI - Telecom Bretagne
by Dominique LE CAMPION (Dominique.LECAMPION@enst-bretagne.fr)
May 1996


This bsp is essentially based on the mvme136 bsp.

Summary of the modifications that were made:

 * include
 
   - bsp.h 
      Peripheral Channel Controller memory mapping
      Z8530 memory mapping
 
 * startup
 
   - bspstart.c
      main () setup for VME roundrobin mode
              setup for the PCC interrupt vector base 
   - bspclean.c
      bsp_cleanup () disable timer 1 & 2 interruptions
   - linkcmds set the RAM start (0x5000) and size (4Meg - 0x5000)
   - setvec.c unchanged
   - sbrk.c unchanged
 
 * console
 
   - console.c taken from the dmv152 bsp (Zilog Z8530)
               with no modification
 
 * clock
 
   - ckinit.c entirely rewritten for the PCC tick timer 2
 
 * timer
 
   - timerisr.s and timer.c 
     entirely rewritten for the PCC tick timer 1
     now gives results un 6.25 us units (mininum timer delay,
     suprising big grain)
 
 * times
 
   - updated results for the mvme147 (beware of the 6.25 us grain)

 * Makefiles
   
   - compilation of shmsupp simply removed


To be done:

 * add VMEchip memory mapping to include/bsp.h

 * update the overheads in coverhead.h 

 * add support for serila ports 2,3 and 4.

Other notes:

 * There is no MP support (no more shmsupp) because I have no
   experience of the VME bus. The mvme136 shared memory support
   does not seem applicable on the VMEchip of the mvme147, so
   I don't know where to start. Suggestions are welcome.

 * All the timing tests and sp tests have been run except tmoverhd.
   The test hangs during the pause (where the task should be suspended
   until a return). Maybe the rtems_initialize_executive is no more
   reentrant with this bsp. 

Future work:

 * Add gdb serial remote support.

 * Shared memory support (I don't really need it, but I can do
   it if it's simple).

 * Message passing on VME bus, with Ada 95 annex E (distributed
   systems) in mind.

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.