Subversion Repositories openrisc_2011-10-31

/*  Timer_init()
 *
 *  This routine initializes the PCC timer on the MVME147 board.
 *
 *  Input parameters:  NONE
 *
 *  Output parameters:  NONE
 *
 *  NOTE: It is important that the timer start/stop overhead be
 *        determined when porting or modifying this code.
 *
 *  COPYRIGHT (c) 1989-1999.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  MVME147 port for TNI - Telecom Bretagne
 *  by Dominique LE CAMPION (Dominique.LECAMPION@enst-bretagne.fr)
 *  May 1996
 *
 *  $Id: timer.c,v 1.2 2001-09-27 12:00:16 chris Exp $
 */
 
#include <bsp.h>
 
#define TIMER_INT_LEVEL 6
 
#define COUNTDOWN_VALUE 0
/* Allows 0.4096 second delay betwin ints */
/* Each tick is 6.25 us */
 
int Ttimer_val;
rtems_boolean Timer_driver_Find_average_overhead;
 
rtems_isr timerisr();
 
void Timer_initialize()
{
  (void) set_vector(timerisr, TIMER_1_VECTOR, 0); /* install ISR */
 
  Ttimer_val = 0;                 /* clear timer ISR count */
  pcc->timer1_int_control = 0x00; /* Disable T1 Interr. */
  pcc->timer1_preload = COUNTDOWN_VALUE;
  /* write countdown preload value */
  pcc->timer1_control = 0x00; /* load preload value */
  pcc->timer1_control = 0x07; /* clear T1 overflow counter, enable counter */
  pcc->timer1_int_control = TIMER_INT_LEVEL|0x08; 
  /* Enable Timer 1 and set its int. level */
 
}
 
#define AVG_OVERHEAD      0  /* No need to start/stop the timer to read
				its value on the MVME147 PCC: reads are not
				synchronized whith the counter updates*/
#define LEAST_VALID       10 /* Don't trust a value lower than this */
 
int Read_timer()
{
  rtems_unsigned32 total;
  rtems_unsigned16 counter_value;
 
  counter_value = pcc->timer1_count; /* read the counter value */
 
  total = ((Ttimer_val * 0x10000) + counter_value); /* in 6.25 us units */
  /* DC note : just look at the assembly generated
     to see gcc's impressive optimization ! */
  return total;
 
}
 
rtems_status_code Empty_function( void )
{
  return RTEMS_SUCCESSFUL;
}
 
void Set_find_average_overhead(
  rtems_boolean find_flag
)
{
  Timer_driver_Find_average_overhead = find_flag;
}