URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [m68k/] [mvme167/] [network/] [network.c] - Rev 773
Go to most recent revision | Compare with Previous | Blame | View Log
/* network.c: An 82596 ethernet driver for rtems-bsd. * * $Id: network.c,v 1.2 2001-09-27 12:00:20 chris Exp $ */ #define KERNEL /* * Selectively define to debug the network driver. If you define any of these * you must run with polled console I/O. */ /* #define DBG_ADD_CMD #define DBG_WAIT #define DBG_SEND #define DBG_MEM #define DBG_SELFTEST_CMD #define DBG_DUMP_CMD #define DBG_RESET #define DBG_ATTACH #define DBG_START #define DBG_INIT #define DBG_STOP #define DBG_RX #define DBG_ISR #define DBG_IOCTL #define DBG_STAT #define DBG_PACKETS */ /* * Default number of buffer descriptors and buffer sizes. */ #define RX_BUF_COUNT 15 #define TX_BUF_COUNT 4 #define TX_BD_PER_BUF 4 #define RBUF_SIZE 1520 #define UTI_596_ETH_MIN_SIZE 60 /* * RTEMS events */ #define INTERRUPT_EVENT RTEMS_EVENT_1 #define START_TRANSMIT_EVENT RTEMS_EVENT_2 #define NIC_RESET_EVENT RTEMS_EVENT_3 #include <bsp.h> #include <stdio.h> #include <rtems/error.h> #include <rtems/rtems_bsdnet.h> #include <sys/param.h> #include <sys/mbuf.h> #include <sys/socket.h> #include <sys/sockio.h> #include <net/if.h> #include <netinet/in.h> #include <netinet/if_ether.h> #include "uti596.h" /* If we are running interrupt driven I/O no debug output is printed */ #if CD2401_POLLED_IO == 1 #define printk(arglist) printk arglist; #else #define printk(arglist) #endif #define UTI_596_ASSERT( condition, str ) if (!( condition ) ) { printk((str)) } /* Types of PORT commands */ #define UTI596_RESET_PORT_FUNCTION 0 #define UTI596_SELFTEST_PORT_FUNCTION 1 #define UTI596_SCP_PORT_FUNCTION 2 #define UTI596_DUMP_PORT_FUNCTION 3 /* Types of waiting for commands */ #define UTI596_NO_WAIT 0 #define UTI596_WAIT_FOR_CU_ACCEPT 1 #define UTI596_WAIT_FOR_INITIALIZATION 2 #define UTI596_WAIT_FOR_STAT_C 3 /* Device dependent data structure */ static uti596_softc_ uti596_softc; /* Globals */ int count_rx = 0; static int scbStatus; static rtems_status_code sc; static i596_cmd *pIsrCmd; static i596_rfd *pIsrRfd; /* * Initial 596 configuration */ char uti596initSetup[] = { 0x0E, /* Byte 0: length, prefetch off ( no RBD's ) */ 0xC8, /* Byte 1: fifo to 8, monitor off */ 0x40, /* Byte 2: don't save bad frames ( was save= 80, use intel's 40 )*/ 0x2E, /* Byte 3: No source address insertion, 8 byte preamble */ 0x00, /* Byte 4: priority and backoff defaults */ 0x60, /* Byte 5: interframe spacing */ 0x00, /* Byte 6: slot time LSB */ 0xf2, /* Byte 7: slot time and retries */ 0x0C, /* Byte 8: not promisc, enable bcast, tx no crs, crc inserted 32bit, 802.3 framing */ 0x08, /* Byte 9: collision detect */ 0x40, /* Byte 10: minimum frame length */ 0xfb, /* Byte 11: tried C8 same as byte 1 in bits 6-7, else ignored*/ 0x00, /* Byte 12: disable full duplex */ 0x3f /* Byte 13: no multi IA, backoff enabled */ }; /* Local Routines */ static unsigned long word_swap ( unsigned long ); static void * malloc_16byte_aligned ( void **, void ** adjusted_pointer, size_t ); RTEMS_INLINE_ROUTINE void uti596_writePortFunction ( void *, unsigned long ); RTEMS_INLINE_ROUTINE void uti596_portReset( void ); static unsigned long uti596_portSelfTest( i596_selftest * ); static int uti596_portDump ( i596_dump_result * ); static int uti596_wait ( uti596_softc_ *, unsigned8 ); static int uti596_issueCA ( uti596_softc_ *, unsigned8 ); static void uti596_addCmd ( i596_cmd * ); static void uti596_addPolledCmd ( i596_cmd * ); static void uti596_CU_dump ( i596_dump_result * ); static void uti596_dump_scb ( void ); static int uti596_setScpAndScb ( uti596_softc_ * ); static int uti596_diagnose ( void ); static int uti596_configure ( uti596_softc_ * ); static int uti596_IAsetup ( uti596_softc_ * ); static int uti596_initTBD ( uti596_softc_ * ); static int uti596_initRFA ( int ); static void uti596_initMem ( uti596_softc_ * ); static void uti596_initialize ( uti596_softc_ * ); static void uti596_initialize_hardware ( uti596_softc_ * ); static void uti596_reset_hardware ( uti596_softc_ *); static void uti596_reset ( void ); static void uti596_clearListStatus ( i596_rfd * ); static i596_rfd * uti596_dequeue ( i596_rfd ** ); static void uti596_append ( i596_rfd ** , i596_rfd * ); static void uti596_supplyFD ( i596_rfd * ); static void send_packet ( struct ifnet *, struct mbuf * ); /* Required RTEMS network driver functions and tasks (plus reset daemon) */ static void uti596_start ( struct ifnet * ); void uti596_init ( void * ); void uti596_stop ( uti596_softc_ * ); void uti596_txDaemon ( void * ); void uti596_rxDaemon ( void * ); void uti596_resetDaemon( void * ); rtems_isr uti596_DynamicInterruptHandler ( rtems_vector_number ); static int uti596_ioctl ( struct ifnet *, int, caddr_t ); void uti596_stats ( uti596_softc_ * ); #ifdef DBG_PACKETS static void dumpQ( void ); static void show_buffers( void ); static void show_queues( void ); static void print_eth ( unsigned char * ); static void print_hdr ( unsigned char * ); static void print_pkt ( unsigned char * ); static void print_echo ( unsigned char * ); #endif /* * word_swap * * Return a 32 bit value, swapping the upper and lower words first. * * Input parameters: * val - 32 bit value to swap * * Output parameters: NONE * * Return value: * Input value with upper and lower 16-bit words swapped */ static unsigned long word_swap( unsigned long val ) { return (((val >> 16)&(0x0000ffff)) | ((val << 16)&(0xffff0000))); } /* * malloc_16byte_aligned * * Allocate a block of a least nbytes aligned on a 16-byte boundary. * Clients are responsible to store both the real address and the adjusted * address. The real address must be used to free the block. * * Input parameters: * real_pointer - pointer to a void * pointer in which to store the starting * address of the block. Required for free. * adjusted_pointer - pointer to a void * pointer in which to store the * starting address of the block rounded up to the next * 16 byte boundary. * nbytes - number of bytes of storage requested * * Output parameters: * real_pointer - starting address of the block. * adjusted_pointer - starting address of the block rounded up to the next * 16 byte boundary. * * Return value: * starting address of the block rounded up to the next 16 byte boundary. * NULL if no storage was allocated. */ static void * malloc_16byte_aligned( void ** real_pointer, void ** adjusted_pointer, size_t nbytes ) { *real_pointer = malloc( nbytes + 0xF, 0, M_NOWAIT ); *adjusted_pointer = (void *)(((unsigned long)*real_pointer + 0xF ) & 0xFFFFFFF0 ); return *adjusted_pointer; } /* * uti596_scp_alloc * * Allocate a new scp, possibly freeing a previously allocated one. * * Input parameters: * sc - pointer to the global uti596_softc in which to store pointers * to the newly allocated block. * * Output parameters: NONE * * Return value: * Pointer to the newly allocated, 16-byte aligned scp. */ static i596_scp * uti596_scp_alloc( uti596_softc_ * sc ) { if( sc->base_scp != NULL ) { #ifdef DBG_MEM printk(("uti596_scp_alloc: Already have an SCP at %p\n", sc->base_scp)) #endif return sc->pScp; } /* allocate enough memory for the Scp block to be aligned on 16 byte boundary */ malloc_16byte_aligned( (void *)&(sc->base_scp), (void *)&(sc->pScp), sizeof( i596_scp ) ); #ifdef DBG_MEM printk(("uti596_scp_alloc: Scp base address is %p\n", sc->base_scp)) printk(("uti596_scp_alloc: Scp aligned address is : %p\n",sc->pScp)) #endif return sc->pScp; } /* * uti596_writePortFunction * * Write the command into the PORT. * * Input parameters: * addr - 16-byte aligned address to write into the PORT. * cmd - 4-bit cmd to write into the PORT * * Output parameters: NONE * * Return value: NONE * * The Motorola manual swapped the high and low registers. */ RTEMS_INLINE_ROUTINE void uti596_writePortFunction( void * addr, unsigned long cmd ) { i82596->port_lower = (unsigned short)(((unsigned long)addr & 0xFFF0) | cmd); i82596->port_upper = (unsigned short)(((unsigned long)addr >> 16 ) & 0xFFFF); } /* * uti596_portReset * * Issue a port Reset to the uti596 * * Input parameters: NONE * * Output parameters: NONE * * Return value: NONE */ RTEMS_INLINE_ROUTINE void uti596_portReset( void ) { uti596_writePortFunction( NULL, UTI596_RESET_PORT_FUNCTION ); } /* * uti596_portSelfTest * * Perform a self-test. Wait for up to 1 second for the test to * complete. Normally, the test should complete in a very short time, * so busy waiting is not an issue. * * Input parameters: * stp - pointer to a 16-byte aligned uti596_selftest structure. * * Output parameters: NONE * * Return value: * 32-bit result field if successful, -1 otherwise. */ static unsigned long uti596_portSelfTest( i596_selftest * stp ) { rtems_interval ticks_per_second, start_ticks, end_ticks; stp->results = 0xFFFFFFFF; uti596_writePortFunction( stp, UTI596_SELFTEST_PORT_FUNCTION ); rtems_clock_get(RTEMS_CLOCK_GET_TICKS_PER_SECOND, &ticks_per_second); rtems_clock_get(RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &start_ticks); end_ticks = start_ticks + ticks_per_second; do { if( stp->results != 0xFFFFFFFF ) break; else rtems_clock_get(RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &start_ticks); } while (start_ticks <= end_ticks); if (start_ticks > end_ticks ) { #ifdef DBG_SELFTEST_CMD printk(("uti596_selftest: Timed out\n" )) #endif return -1; } else { #ifdef DBG_SELFTEST_CMD printk(("uti596_selftest: Succeeded with signature = 0x%08x, result = 0x%08x\n", stp->signature, stp->results)) #endif return stp->results; } } /* * uti596_portDump * * Perform a dump Wait for up to 1 second for the test to * complete. Normally, the test should complete in a very short time, * so busy waiting is not an issue. * * Input parameters: * dp - pointer to a 16-byte aligned uti596_dump structure. * * Output parameters: NONE * * Return value: * 16-bit dump_status field if successful, -1 otherwise. */ static int uti596_portDump( i596_dump_result * dp ) { rtems_interval ticks_per_second, start_ticks, end_ticks; dp->dump_status = 0; uti596_writePortFunction( dp, UTI596_DUMP_PORT_FUNCTION ); rtems_clock_get(RTEMS_CLOCK_GET_TICKS_PER_SECOND, &ticks_per_second); rtems_clock_get(RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &start_ticks); end_ticks = start_ticks + ticks_per_second; do { if( dp->dump_status != 0xA006 ) break; else rtems_clock_get(RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &start_ticks); } while (start_ticks <= end_ticks); if (start_ticks > end_ticks ) { #ifdef DBG_DUMP_CMD printk(("uti596_dump: Timed out with dump at 0x%08x\n", (unsigned long)dp )) #endif return -1; } else { #ifdef DBG_DUMP_CMD printk(("uti596_dump: Succeeded with dump at = 0x%08x\n", (unsigned long)dp )) #endif return dp->dump_status; } } /* * uti596_wait * * Wait for a certain condition. * * Input parameters: * sc - pointer to the uti596_softc struct * wait_type - UTI596_NO_WAIT * UTI596_WAIT_FOR_CU_ACCEPT * UTI596_WAIT_FOR_INITIALIZATION * UTI596_WAIT_FOR_STAT_C * * Output parameters: NONE * * Return value: * 0 if successful, -1 otherwise. */ static int uti596_wait( uti596_softc_ *sc, unsigned8 waitType ) { rtems_interval ticks_per_second, start_ticks, end_ticks; switch( waitType ) { case UTI596_NO_WAIT: return 0; case UTI596_WAIT_FOR_CU_ACCEPT: rtems_clock_get(RTEMS_CLOCK_GET_TICKS_PER_SECOND, &ticks_per_second); rtems_clock_get(RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &start_ticks); end_ticks = start_ticks + ticks_per_second; do { if (sc->scb.command == 0) break; else rtems_clock_get(RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &start_ticks); } while (start_ticks <= end_ticks); if( (sc->scb.command != 0) || (start_ticks > end_ticks) ) { printf("i82596 timed out with status %x, cmd %x.\n", sc->scb.status, sc->scb.command); return -1; } else return 0; case UTI596_WAIT_FOR_INITIALIZATION: rtems_clock_get(RTEMS_CLOCK_GET_TICKS_PER_SECOND, &ticks_per_second); rtems_clock_get(RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &start_ticks); end_ticks = start_ticks + ticks_per_second; do { if( !sc->iscp.busy ) break; else rtems_clock_get(RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &start_ticks); } while (start_ticks <= end_ticks); if (start_ticks > end_ticks ) { #ifdef DBG_WAIT printk(("uti596_setScpAndScb: Timed out\n" )) #endif return -1; } else { #ifdef DBG_WAIT printk(("uti596_setScpAndScb: Succeeded\n" )) #endif return 0; } case UTI596_WAIT_FOR_STAT_C: rtems_clock_get(RTEMS_CLOCK_GET_TICKS_PER_SECOND, &ticks_per_second); rtems_clock_get(RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &start_ticks); end_ticks = start_ticks + ticks_per_second; do { if( *sc->pCurrent_command_status & STAT_C ) break; else rtems_clock_get(RTEMS_CLOCK_GET_TICKS_SINCE_BOOT, &start_ticks); } while (start_ticks <= end_ticks); if (start_ticks > end_ticks ) { #ifdef DBG_WAIT printk(("uti596_initMem: timed out - STAT_C not obtained\n" )) #endif return -1; } else { #ifdef DBG_WAIT printk(("uti596_initMem: STAT_C obtained OK\n" )) #endif return 0; } } return -1; } /* * uti596_issueCA * * Issue a Channel Attention command. Possibly wait for the * command to start or complete. * * Input parameters: * sc - pointer to the uti596_softc * wait_type - UTI596_NO_WAIT * UTI596_WAIT_BEGIN * UTI596_WAIT_COMPLETION * * Output parameters: NONE * * Return value: * 0 if successful, -1 otherwise. */ static int uti596_issueCA( uti596_softc_ *sc, unsigned8 waitType ) { /* Issue Channel Attention */ i82596->chan_attn = 0x00000000; return (uti596_wait ( sc, waitType )); } /* * uti596_addCmd * * Add a uti596_cmd onto the end of the CBL command chain, * or to the start if the chain is empty. * * Input parameters: * pCmd - a pointer to the command to be added. * * Output parameters: NONE * * Return value: NONE */ static void uti596_addCmd( i596_cmd *pCmd ) { ISR_Level level; #ifdef DBG_ADD_CMD printk(("uti596_addCmd: Adding command 0x%x\n", pCmd -> command )) #endif /* Mark command as last in list, to return an interrupt */ pCmd->command |= (CMD_EOL | CMD_INTR ); pCmd->status = 0; pCmd->next = I596_NULL; _ISR_Disable(level); if (uti596_softc.pCmdHead == I596_NULL) { uti596_softc.pCmdHead = uti596_softc.pCmdTail = uti596_softc.scb.pCmd = pCmd; uti596_softc.scb.cmd_pointer = word_swap ((unsigned long)pCmd); uti596_wait ( &uti596_softc, UTI596_WAIT_FOR_CU_ACCEPT ); uti596_softc.scb.command = CUC_START; uti596_issueCA ( &uti596_softc, UTI596_NO_WAIT ); _ISR_Enable(level); } else { uti596_softc.pCmdTail->next = (i596_cmd *) word_swap ((unsigned long)pCmd); uti596_softc.pCmdTail = pCmd; _ISR_Enable(level); } #ifdef DBG_ADD_CMD printk(("uti596_addCmd: Scb status & command 0x%x 0x%x\n", uti596_softc.scb.status, uti596_softc.scb.command )) #endif } /* * uti596_addPolledCmd * * Add a single uti596_cmd to the end of the command block list * for processing, send a CU_START and wait for its acceptance * * Input parameters: * sc - a pointer to the uti596_softc struct * * Output parameters: NONE * * Return value: NONE */ void uti596_addPolledCmd( i596_cmd *pCmd ) { #ifdef DBG_ADD_CMD printk(("uti596_addPolledCmd: Adding command 0x%x\n", pCmd -> command )) #endif pCmd->status = 0; pCmd->command |= CMD_EOL ; /* only command in list*/ pCmd->next = I596_NULL; uti596_wait ( &uti596_softc, UTI596_WAIT_FOR_CU_ACCEPT ); uti596_softc.pCmdHead = uti596_softc.pCmdTail = uti596_softc.scb.pCmd = pCmd; uti596_softc.scb.cmd_pointer = word_swap((unsigned long)pCmd); uti596_softc.scb.command = CUC_START; uti596_issueCA ( &uti596_softc, UTI596_WAIT_FOR_CU_ACCEPT ); uti596_softc.pCmdHead = uti596_softc.pCmdTail = uti596_softc.scb.pCmd = I596_NULL; uti596_softc.scb.cmd_pointer = (unsigned long) I596_NULL; #ifdef DBG_ADD_CMD printk(("uti596_addPolledCmd: Scb status & command 0x%x 0x%x\n", uti596_softc.scb.status, uti596_softc.scb.command )) #endif } /* * uti596_CU_dump * * Dump the LANC 82596 registers * The outcome is the same as the portDump() but executed * via the CU instead of via a PORT access. * * Input parameters: * drp - a pointer to a i596_dump_result structure. * * Output parameters: NONE * * Return value: NONE */ static void uti596_CU_dump ( i596_dump_result * drp) { i596_dump dumpCmd; dumpCmd.cmd.command = CmdDump; dumpCmd.cmd.next = I596_NULL; dumpCmd.pData = (char *) drp; uti596_softc.cmdOk = 0; uti596_addCmd ( (i596_cmd *) &dumpCmd ); } /* * uti596_dump_scb * * Dump the system control block * This function expands to nothing when using interrupt driven I/O * * Input parameters: NONE * * Output parameters: NONE * * Return value: NONE */ static void uti596_dump_scb ( void ) { printk(("status 0x%x\n",uti596_softc.scb.status)) printk(("command 0x%x\n",uti596_softc.scb.command)) printk(("cmd 0x%x\n",(int)uti596_softc.scb.pCmd)) printk(("rfd 0x%x\n",(int)uti596_softc.scb.pRfd)) printk(("crc_err 0x%x\n",uti596_softc.scb.crc_err)) printk(("align_err 0x%x\n",uti596_softc.scb.align_err)) printk(("resource_err 0x%x\n",uti596_softc.scb.resource_err )) printk(("over_err 0x%x\n",uti596_softc.scb.over_err)) printk(("rcvdt_err 0x%x\n",uti596_softc.scb.rcvdt_err)) printk(("short_err 0x%x\n",uti596_softc.scb.short_err)) printk(("t_on 0x%x\n",uti596_softc.scb.t_on)) printk(("t_off 0x%x\n",uti596_softc.scb.t_off)) } /* * uti596_setScpAndScb * * Issue the first channel attention after reset and wait for the busy * field to clear in the iscp. * * Input parameters: * sc - pointer to the global uti596_softc * * Output parameters: NONE * * Return value: * 0 if successful, -1 otherwise. */ static int uti596_setScpAndScb( uti596_softc_ * sc ) { /* set the busy flag in the iscp */ sc->iscp.busy = 1; /* the command block list (CBL) is empty */ sc->scb.command = 0; sc->scb.cmd_pointer = (unsigned long) I596_NULL; /* all 1's */ sc->pCmdHead = sc->scb.pCmd = I596_NULL; /* all 1's */ uti596_writePortFunction( sc->pScp, UTI596_SCP_PORT_FUNCTION ); /* Issue CA: pass the scb address to the 596 */ return ( uti596_issueCA ( sc, UTI596_WAIT_FOR_INITIALIZATION ) ); } /* * uti596_diagnose * * Send a diagnose command to the CU * * Input parameters: NONE * * Output parameters: NONE * * Return value: * 0 if successful, -1 otherwise */ static int uti596_diagnose( void ) { i596_cmd diagnose; diagnose.command = CmdDiagnose; diagnose.status = 0; uti596_softc.pCurrent_command_status = &diagnose.status; uti596_addPolledCmd(&diagnose); return (uti596_wait ( &uti596_softc, UTI596_WAIT_FOR_STAT_C )); #ifdef DBG_INIT printk(("Status diagnostic: 0xa000 is a success ... 0x%2.2x\n", diagnose.status)) #endif } /* * uti596_configure * * Send the CU a configure command with the desired * configuration structure * * Input parameters: * sc - a pointer to the uti596_softc struct * * Output parameters: NONE * * Return value: * 0 if successful, -1 otherwise */ static int uti596_configure ( uti596_softc_ * sc ) { sc->set_conf.cmd.command = CmdConfigure; memcpy (sc->set_conf.data, uti596initSetup, 14); uti596_addPolledCmd( (i596_cmd *) &sc->set_conf); /* Poll for successful command completion */ sc->pCurrent_command_status = &(sc->set_conf.cmd.status); return ( uti596_wait ( sc, UTI596_WAIT_FOR_STAT_C ) ); } /* * uti596_IAsetup * * Send the CU an Individual Address setup command with * the ethernet hardware address * * Input parameters: * sc - a pointer to the uti596_softc struct * * Output parameters: NONE * * Return value: * 0 if successful, -1 otherwise */ static int uti596_IAsetup ( uti596_softc_ * sc ) { int i; sc->set_add.cmd.command = CmdSASetup; for ( i=0; i<6; i++) { sc->set_add.data[i]=sc->arpcom.ac_enaddr[i]; } sc->cmdOk = 0; uti596_addPolledCmd((i596_cmd *)&sc->set_add); /* Poll for successful command completion */ sc->pCurrent_command_status = &(sc->set_add.cmd.status); return ( uti596_wait ( sc, UTI596_WAIT_FOR_STAT_C ) ); } /* * uti596_initTBD * * Initialize transmit buffer descriptors * dynamically allocate mem for the number of tbd's required * * Input parameters: * sc - a pointer to the uti596_softc struct * * Output parameters: NONE * * Return value: * 0 if successful, -1 otherwise */ static int uti596_initTBD ( uti596_softc_ * sc ) { int i; i596_tbd *pTbd, *pPrev; /* Set up a transmit command with a tbd ready */ sc->pLastUnkRFD = I596_NULL; sc->pTxCmd = (i596_tx *) calloc (1,sizeof (struct i596_tx) ); sc->pTbd = (i596_tbd *) calloc (1,sizeof (struct i596_tbd) ); if ((sc->pTxCmd == NULL) || (sc->pTbd == NULL)) { return -1; } sc->pTxCmd->pTbd = (i596_tbd *) word_swap ((unsigned long) sc->pTbd); sc->pTxCmd->cmd.command = CMD_FLEX|CmdTx; sc->pTxCmd->pad = 0; sc->pTxCmd->count = 0; /* all bytes are in list of TBD's */ pPrev = pTbd = sc->pTbd; /* Allocate a linked list of tbd's each with it's 'next' field written * with upper and lower words swapped (for big endian), and mark the end. */ for ( i=0; i<sc->txBdCount; i++) { if ( (pTbd = (i596_tbd *) calloc (1,sizeof (struct i596_tbd) )) == NULL ) { return -1; } pPrev->next = (i596_tbd *) word_swap ((unsigned long) pTbd); pPrev = pTbd; } pTbd->next = I596_NULL; return 0; } /* * uti596_initRFA * * Initialize the Receive Frame Area * dynamically allocate mem for the number of rfd's required * * Input parameters: * sc - a pointer to the uti596_softc struct * * Output parameters: NONE * * Return value: * # of buffer descriptors successfully allocated */ static int uti596_initRFA( int num ) { i596_rfd *pRfd; int i = 0; #ifdef DBG_INIT printk(("uti596_initRFA: begins\n Requested frame descriptors ... %d.\n", num)) #endif /* * Create the first RFD in the RFA */ pRfd = (i596_rfd *) calloc (1, sizeof (struct i596_rfd)); if ( !pRfd ) { printk(("Can't allocate first buffer.\n")) return 0; } else { uti596_softc.countRFD = 1; uti596_softc.pBeginRFA = uti596_softc.pEndRFA = pRfd; } /* Create remaining RFDs */ for (i = 1; i < num; i++) { pRfd = (i596_rfd *) calloc (1, sizeof (struct i596_rfd) ); if ( pRfd != NULL ) { uti596_softc.countRFD++; /* update count */ uti596_softc.pEndRFA->next = (i596_rfd *) word_swap ((unsigned long) pRfd); /* write the link */ uti596_softc.pEndRFA = pRfd; /* move the end */ } else { printk(("Can't allocate all buffers: only %d allocated\n", i)) break; } } /* end for */ uti596_softc.pEndRFA->next = I596_NULL; UTI_596_ASSERT(uti596_softc.countRFD == RX_BUF_COUNT,"INIT:WRONG RFD COUNT\n" ) #ifdef DBG_INIT printk (("uti596_initRFA: Head of RFA is buffer %p \n\ uti596_initRFA: End of RFA is buffer %p \n", uti596_softc.pBeginRFA, uti596_softc.pEndRFA )) #endif /* Walk and initialize the RFD's */ for ( pRfd = uti596_softc.pBeginRFA; pRfd != I596_NULL; pRfd = (i596_rfd *) word_swap ((unsigned long)pRfd->next) ) { pRfd->cmd = 0x0000; pRfd->stat = 0x0000; pRfd->pRbd = I596_NULL; pRfd->count = 0; /* number of bytes in buffer: usually less than size */ pRfd->size = 1532; /* was 1532; buffer size ( All RBD ) */ } /* end for */ /* mark the last RFD as the last one in the RDL */ uti596_softc.pEndRFA -> cmd = CMD_EOL; uti596_softc.pSavedRfdQueue = uti596_softc.pEndSavedQueue = I596_NULL; /* initially empty */ uti596_softc.savedCount = 0; uti596_softc.nop.cmd.command = CmdNOp; /* initialize the nop command */ return (i); /* the number of allocated buffers */ } /* * uti596_initMem * * Initialize the 82596 memory structures for Tx and Rx * dynamically allocate mem for the number of tbd's required * * Input parameters: * sc - a pointer to the uti596_softc struct * * Output parameters: NONE * * Return value: NONE */ void uti596_initMem( uti596_softc_ * sc ) { int i; #ifdef DBG_INIT printk(("uti596_initMem: begins\n")) #endif sc->resetDone = 0; /* * Set up receive frame area (RFA) */ i = uti596_initRFA( sc->rxBdCount ); if ( i < sc->rxBdCount ) { printk(("init_rfd: only able to allocate %d receive frame descriptors\n", i)) } /* * Write the SCB with a pointer to the receive frame area * and keep a pointer for our use. */ sc->scb.rfd_pointer = word_swap((unsigned long)sc->pBeginRFA); sc->scb.pRfd = sc->pBeginRFA; /* * Diagnose the health of the board */ uti596_diagnose(); /* * Configure the 82596 */ uti596_configure( sc ); /* * Set up the Individual (hardware) Address */ uti596_IAsetup ( sc ); /* * Initialize the transmit buffer descriptors */ uti596_initTBD( sc ); /* Padding used to fill short tx frames */ memset ( &sc->zeroes, 0, 64); /* now need ISR */ sc->resetDone = 1; } /* * uti596_initialize * * Reset the 82596 and initialize it with a new SCP. * * Input parameters: * sc - pointer to the uti596_softc * * Output parameters: NONE * * Return value: NONE */ void uti596_initialize( uti596_softc_ *sc ) { /* Reset the device. Stops it from doing whatever it might be doing. */ uti596_portReset(); /* Get a new System Configuration Pointer */ uti596_scp_alloc( sc ); /* write the SYSBUS: interrupt pin active high, LOCK disabled, * internal triggering, linear mode */ sc->pScp->sysbus = 0x54; /* provide the iscp to the scp, keep a pointer for our use */ sc->pScp->iscp_pointer = word_swap((unsigned long)&sc->iscp); sc->pScp->iscp = &sc->iscp; /* provide the scb to the iscp, keep a pointer for our use */ sc->iscp.scb_pointer = word_swap((unsigned long)&sc->scb); sc->iscp.scb = &sc->scb; #ifdef DBG_INIT printk(("uti596_initialize: Starting i82596.\n")) #endif /* Set up the 82596 */ uti596_setScpAndScb( sc ); /* clear the scb command word */ sc->scb.command = 0; } /* * uti596_initialize_hardware * * Reset the 82596 and initialize it with a new SCP. Enable bus snooping. * Install the interrupt handlers. * * Input parameters: * sc - pointer to the uti596_softc * * Output parameters: NONE * * Return value: NONE */ void uti596_initialize_hardware( uti596_softc_ *sc ) { rtems_isr_entry dummy; printk(("uti596_initialize_hardware: begins\n")) /* Get the PCCChip2 to assert bus snooping signals on behalf of the i82596 */ pccchip2->LANC_berr_ctl = 0x40; uti596_initialize( sc ); /* * Configure interrupt control in PCCchip2 */ pccchip2->LANC_error = 0xff; /* clear status register */ pccchip2->LANC_int_ctl = 0x5d; /* lvl 5, enabled, edge-sensitive rising */ pccchip2->LANC_berr_ctl = 0x5d; /* bus error: lvl 5, enabled, snoop control * will supply dirty data and leave dirty data * on read access and sink any data on write */ /* * Install the interrupt handler * calls rtems_interrupt_catch */ dummy = (rtems_isr_entry) set_vector( uti596_DynamicInterruptHandler, 0x57, 1 ); /* Initialize the 82596 memory */ uti596_initMem(sc); #ifdef DBG_INIT printk(("uti596_initialize_hardware: After attach, status of board = 0x%x\n", sc->scb.status )) #endif } /* * uti596_reset_hardware * * Reset the 82596 and initialize it with an SCP. * * Input parameters: * sc - pointer to the uti596_softc * * Output parameters: NONE * * Return value: NONE */ void uti596_reset_hardware( uti596_softc_ *sc ) { rtems_status_code status_code; i596_cmd *pCmd; pCmd = sc->pCmdHead; /* This is a tx command for sure (99.99999%) */ /* the command block list (CBL) is empty */ sc->scb.cmd_pointer = (unsigned long) I596_NULL; /* all 1's */ sc->pCmdHead = sc->scb.pCmd = I596_NULL; /* all 1's */ #ifdef DBG_RESET printk(("uti596_reset_hardware\n")) #endif uti596_initialize( sc ); /* * Wake the transmitter if needed. */ if ( sc->txDaemonTid && pCmd != I596_NULL ) { printk(("****RESET: wakes transmitter!\n")) status_code = rtems_event_send (sc->txDaemonTid, INTERRUPT_EVENT); if ( status_code != RTEMS_SUCCESSFUL ) { printk(("****ERROR:Could NOT send event to tid 0x%x : %s\n", sc->txDaemonTid, rtems_status_text (status_code) )) } } #ifdef DBG_RESET printk(("uti596_reset_hardware: After reset_hardware, status of board = 0x%x\n", sc->scb.status )) #endif } /* * uti596_clearListStatus * * Clear the stat fields for all RFDs * * Input parameters: * pRfd - a pointer to the head of the RFA * * Output parameters: NONE * * Return value: NONE */ void uti596_clearListStatus( i596_rfd *pRfd ) { while ( pRfd != I596_NULL ) { pRfd -> stat = 0; pRfd = (i596_rfd *) word_swap((unsigned long)pRfd-> next); } } /* * uti596_reset * * Reset the 82596 and reconfigure * * Input parameters: NONE * * Output parameters: NONE * * Return value: NONE */ void uti596_reset( void ) { uti596_softc_ *sc = &uti596_softc; #ifdef DBG_RESET printk(("uti596_reset: begin\n")) #endif /* Wait for the CU to be available, then * reset the ethernet hardware. Must re-config. */ sc->resetDone = 0; uti596_wait ( sc, UTI596_WAIT_FOR_CU_ACCEPT ); uti596_reset_hardware ( &uti596_softc ); #ifdef DBG_RESET uti596_diagnose(); #endif /* * Configure the 82596 */ uti596_configure( sc ); /* * Set up the Individual (hardware) Address */ uti596_IAsetup ( sc ); sc->pCmdHead = sc->pCmdTail = sc->scb.pCmd = I596_NULL; /* restore the RFA */ if ( sc->pLastUnkRFD != I596_NULL ) { sc-> pEndRFA = sc->pLastUnkRFD; /* The end position can be updated */ sc-> pLastUnkRFD = I596_NULL; } sc->pEndRFA->next = sc->pSavedRfdQueue; if ( sc->pSavedRfdQueue != I596_NULL ) { sc->pEndRFA = sc->pEndSavedQueue; sc->pSavedRfdQueue = sc->pEndSavedQueue = I596_NULL; sc -> countRFD = sc->rxBdCount ; } /* Re-address the head of the RFA in the SCB */ sc->scb.pRfd = sc->pBeginRFA; sc->scb.rfd_pointer = word_swap((unsigned long)sc->pBeginRFA); /* Clear the status of all RFDs */ uti596_clearListStatus( sc->pBeginRFA ); printk(("uti596_reset: Starting NIC\n")) /* Start the receiver */ sc->scb.command = RX_START; sc->started = 1; /* assume that the start is accepted */ sc->resetDone = 1; uti596_issueCA ( sc, UTI596_WAIT_FOR_CU_ACCEPT ); UTI_596_ASSERT(sc->pCmdHead == I596_NULL, "Reset: CMD not cleared\n") #ifdef DBG_RESET printk(("uti596_reset: completed\n")) #endif } /* * uti596_dequeue * * Remove an RFD from the received fram queue * * Input parameters: * ppQ - a pointer to a i596_rfd pointer * * Output parameters: NONE * * Return value: * pRfd - a pointer to the dequeued RFD */ i596_rfd * uti596_dequeue( i596_rfd ** ppQ ) { ISR_Level level; i596_rfd * pRfd; _ISR_Disable(level); /* invalid address, or empty queue or emptied queue */ if( ppQ == NULL || *ppQ == NULL || *ppQ == I596_NULL) { _ISR_Enable(level); return I596_NULL; } /* * Point to the dequeued buffer, then * adjust the queue pointer and detach the buffer */ pRfd = *ppQ; *ppQ = (i596_rfd *) word_swap ((unsigned long) pRfd->next); pRfd->next = I596_NULL; /* unlink the rfd being returned */ _ISR_Enable(level); return pRfd; } /* * uti596_append * * Remove an RFD buffer from the RFA and tack it on to * the received frame queue for processing. * * Input parameters: * ppQ - a pointer to the queue pointer * pRfd - a pointer to the buffer to be returned * * Output parameters: NONE * * Return value: NONE */ void uti596_append( i596_rfd ** ppQ, i596_rfd * pRfd ) { i596_rfd *p; if ( pRfd != NULL && pRfd != I596_NULL) { pRfd -> next = I596_NULL; pRfd -> cmd |= CMD_EOL; /* set EL bit */ if ( *ppQ == NULL || *ppQ == I596_NULL ) { /* empty list */ *ppQ = pRfd; } else { /* walk to the end of the list */ for ( p=*ppQ; p->next != I596_NULL; p=(i596_rfd *) word_swap ((unsigned long)p->next) ); /* append the rfd */ p->cmd &= ~CMD_EOL; /* Clear EL bit at end */ p->next = (i596_rfd *) word_swap ((unsigned long)pRfd); } } else { printk(("Illegal attempt to append: %p\n", pRfd)) } } /* * uti596_supplyFD * * Return a buffer (RFD) to the receive frame area (RFA). * Call with interrupts disabled. * * Input parameters: * pRfd - a pointer to the buffer to be returned * * Output parameters: NONE * * Return value: NONE */ void uti596_supplyFD ( i596_rfd * pRfd ) { i596_rfd *pLastRfd; UTI_596_ASSERT(pRfd != I596_NULL, "Supplying NULL RFD!\n") pRfd -> cmd = CMD_EOL; pRfd -> pRbd = I596_NULL; pRfd -> next = I596_NULL; pRfd -> stat = 0x0000; /* clear STAT_C and STAT_B bits */ /* * Check if the list is empty: */ if ( uti596_softc.pBeginRFA == I596_NULL ) { /* Start a list with one entry */ uti596_softc.pBeginRFA = uti596_softc.pEndRFA = pRfd; UTI_596_ASSERT(uti596_softc.countRFD == 0, "Null begin, but non-zero count\n") if ( uti596_softc.pLastUnkRFD != I596_NULL ) { printk(("LastUnkRFD is NOT NULL!!\n")) } uti596_softc.countRFD = 1; return; } /* * Check if the last RFD is used/read by the 596. */ pLastRfd = uti596_softc.pEndRFA; /* C = complete, B = busy (prefetched) */ if ( pLastRfd != I596_NULL && ! (pLastRfd -> stat & ( STAT_C | STAT_B ) )) { /* * Not yet too late to add it */ pLastRfd -> next = (i596_rfd *) word_swap ((unsigned long)pRfd); pLastRfd -> cmd &= ~CMD_EOL; /* RESET_EL : reset EL bit to 0 */ uti596_softc.countRFD++; /* Lets assume we add it successfully If not, the RFD may be used, and may decrement countRFD < 0 !! */ /* * Check if the last RFD was used while appending. */ if ( pLastRfd -> stat & ( STAT_C | STAT_B ) ) { /* completed or was prefetched */ /* * Either the EL bit of the last rfd has been read by the 82596, * and it will stop after reception,( true when RESET_EL not reached ) or * the EL bit was NOT read by the 82596 and it will use the linked * RFD for the next reception. ( true when RESET_EL was reached ) * So, it is unknown whether or not the linked rfd will be used. * Therefore, the end of list CANNOT be updated. */ UTI_596_ASSERT ( uti596_softc.pLastUnkRFD == I596_NULL, "Too many Unk RFD's\n" ) uti596_softc.pLastUnkRFD = pRfd; return; } else { /* * The RFD being added was not touched by the 82596 */ if (uti596_softc.pLastUnkRFD != I596_NULL ) { uti596_append(&uti596_softc.pSavedRfdQueue, pRfd); /* Only here! saved Q */ uti596_softc.pEndSavedQueue = pRfd; uti596_softc.savedCount++; uti596_softc.countRFD--; } else { uti596_softc.pEndRFA = pRfd; /* the RFA has been extended */ if ( ( uti596_softc.scb.status & SCB_STAT_RNR || uti596_softc.scb.status & RU_NO_RESOURCES ) && uti596_softc.countRFD > 1 ) { /* Ensure that beginRFA is not EOL */ uti596_softc.pBeginRFA -> cmd &= ~CMD_EOL; UTI_596_ASSERT(uti596_softc.pEndRFA -> next == I596_NULL, "supply: List buggered\n") UTI_596_ASSERT(uti596_softc.pEndRFA -> cmd & CMD_EOL, "supply: No EOL at end.\n") UTI_596_ASSERT(uti596_softc.scb.command == 0, "Supply: scb command must be zero\n") #ifdef DBG_MEM printk(("uti596_supplyFD: starting receiver")) #endif /* start the receiver */ UTI_596_ASSERT(uti596_softc.pBeginRFA != I596_NULL, "rx start w/ NULL begin! \n") uti596_softc.scb.pRfd = uti596_softc.pBeginRFA; uti596_softc.scb.rfd_pointer = word_swap ((unsigned long) uti596_softc.pBeginRFA); /* Don't ack RNR! The receiver should be stopped in this case */ uti596_softc.scb.command = RX_START | SCB_STAT_RNR; UTI_596_ASSERT( !(uti596_softc.scb.status & SCB_STAT_FR),"FRAME RECEIVED INT COMING!\n") /* send CA signal */ uti596_issueCA ( &uti596_softc, UTI596_NO_WAIT ); } } return; } } else { /* * too late , pLastRfd in use ( or NULL ), * in either case, EL bit has been read, and RNR condition will occur */ uti596_append( &uti596_softc.pSavedRfdQueue, pRfd); /* save it for RNR */ uti596_softc.pEndSavedQueue = pRfd; /* reset end of saved queue */ uti596_softc.savedCount++; return; } } /* * send_packet * * Send a raw ethernet packet, add a * transmit command to the CBL * * Input parameters: * ifp - a pointer to the ifnet structure * m - a pointer to the mbuf being sent * * Output parameters: NONE * * Return value: NONE */ void send_packet( struct ifnet *ifp, struct mbuf *m ) { i596_tbd *pPrev = I596_NULL; i596_tbd *pRemainingTbdList; i596_tbd *pTbd; struct mbuf *n, *input_m = m; uti596_softc_ *sc = ifp->if_softc; struct mbuf *l = NULL; unsigned int length = 0; rtems_status_code status; int bd_count = 0; rtems_event_set events; /* * For all mbufs in the chain, * fill a transmit buffer descriptor for each */ pTbd = (i596_tbd*) word_swap ((unsigned long)sc->pTxCmd->pTbd); do { if (m->m_len) { /* * Fill in the buffer descriptor */ length += m->m_len; pTbd->data = (char *) word_swap ((unsigned long) mtod (m, void *)); pTbd->size = m->m_len; pPrev = pTbd; pTbd = (i596_tbd *) word_swap ((unsigned long) pTbd->next); l = m; m = m->m_next; } else { /* * Just toss empty mbufs */ MFREE (m, n); m = n; if (l != NULL) l->m_next = m; } } while( m != NULL && ++bd_count < 16 ); /* This should never happen */ if ( bd_count == 16 ) { printk(("TX ERROR:Too many mbufs in the packet!!!\n")) printk(("Must coalesce!\n")) } if ( length < UTI_596_ETH_MIN_SIZE ) { pTbd->data = (char *) word_swap ((unsigned long) sc->zeroes); /* add padding to pTbd */ pTbd->size = UTI_596_ETH_MIN_SIZE - length; /* zeroes have no effect on the CRC */ } else /* Don't use pTbd in the send routine */ pTbd = pPrev; /* Disconnect the packet from the list of Tbd's */ pRemainingTbdList = (i596_tbd *) word_swap ((unsigned long)pTbd->next); pTbd->next = I596_NULL; pTbd->size |= UTI_596_END_OF_FRAME; sc->rawsndcnt++; #ifdef DBG_SEND printk(("send_packet: sending packet\n")) #endif /* Sending Zero length packet: shouldn't happen */ if (pTbd->size <= 0) return; #ifdef DBG_PACKETS printk (("\nsend_packet: Transmitter adds packet\n")) print_hdr ( sc->pTxCmd->pTbd->data ); /* print the first part */ print_pkt ( sc->pTxCmd->pTbd->next->data ); /* print the first part */ print_echo (sc->pTxCmd->pTbd->data); #endif /* add the command to the output command queue */ uti596_addCmd ( (i596_cmd *) sc->pTxCmd ); /* sleep until the command has been processed or Timeout encountered. */ status= rtems_bsdnet_event_receive (INTERRUPT_EVENT, RTEMS_WAIT|RTEMS_EVENT_ANY, RTEMS_NO_TIMEOUT, &events); if ( status != RTEMS_SUCCESSFUL ) { printk(("Could not sleep %s\n", rtems_status_text(status))) } #ifdef DBG_SEND printk(("send_packet: RAW - wake\n")) #endif sc->txInterrupts++; if ( sc->pTxCmd -> cmd.status & STAT_OK ) { sc->stats.tx_packets++; } else { printk(("*** send_packet: Driver Error 0x%x\n", sc->pTxCmd -> cmd.status )) sc->stats.tx_errors++; if ( sc->pTxCmd->cmd.status & 0x0020 ) sc->stats.tx_retries_exceeded++; if (!(sc->pTxCmd->cmd.status & 0x0040)) sc->stats.tx_heartbeat_errors++; if ( sc->pTxCmd->cmd.status & 0x0400 ) sc->stats.tx_carrier_errors++; if ( sc->pTxCmd->cmd.status & 0x0800 ) sc->stats.collisions++; if ( sc->pTxCmd->cmd.status & 0x1000 ) sc->stats.tx_aborted_errors++; } /* end if stat_ok */ /* * Restore the transmitted buffer descriptor chain. */ pTbd -> next = (i596_tbd *) word_swap ((unsigned long)pRemainingTbdList); /* * Free the mbufs used by the sender. */ m = input_m; while ( m != NULL ) { MFREE(m,n); m = n; } } /*********************************************************************** * Function: uti596_attach * * Description: * Configure the driver, and connect to the network stack * * Algorithm: * * Check parameters in the ifconfig structure, and * set driver parameters accordingly. * Initialize required rx and tx buffers. * Link driver data structure onto device list. * Return 1 on successful completion. * ***********************************************************************/ int uti596_attach( struct rtems_bsdnet_ifconfig * pConfig ) { uti596_softc_ *sc = &uti596_softc; /* device dependent data structure */ struct ifnet * ifp = &sc->arpcom.ac_if; /* ifnet structure */ int unitNumber; char *unitName; #ifdef DBG_ATTACH printk(("uti596_attach: begins\n")) #endif /* The NIC is not started yet */ sc->started = 0; /* Indicate to ULCS that this is initialized */ ifp->if_softc = sc; sc->pScp = NULL; /* Parse driver name */ if ((unitNumber = rtems_bsdnet_parse_driver_name (pConfig, &unitName)) < 0) return 0; ifp->if_name = unitName; ifp->if_unit = unitNumber; /* Assign mtu */ if ( pConfig -> mtu ) ifp->if_mtu = pConfig -> mtu; else ifp->if_mtu = ETHERMTU; /* Ethernet address can be specified in the ifconfig structure or * it can be read in from BBRAM at $FFFC1F2C (6 bytes) * mvme167 manual p. 1-47 */ if ( pConfig->hardware_address) { memcpy (sc->arpcom.ac_enaddr, pConfig->hardware_address, ETHER_ADDR_LEN); } else { memcpy (sc->arpcom.ac_enaddr, (char *)0xFFFC1F2C, ETHER_ADDR_LEN); } /* Assign requested receive buffer descriptor count */ if (pConfig->rbuf_count) sc->rxBdCount = pConfig->rbuf_count; else sc->rxBdCount = RX_BUF_COUNT; /* Assign requested tx buffer descriptor count */ if (pConfig->xbuf_count) sc->txBdCount = pConfig->xbuf_count; else sc->txBdCount = TX_BUF_COUNT * TX_BD_PER_BUF; /* Set up fields in the ifnet structure*/ ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX; ifp->if_snd.ifq_maxlen = ifqmaxlen; ifp->if_init = uti596_init; ifp->if_ioctl = uti596_ioctl; ifp->if_start = uti596_start; ifp->if_output = ether_output; /* uti596_softc housekeeping */ sc->started = 1; sc->pInboundFrameQueue = I596_NULL; sc->scb.command = 0; /* * Attach the interface */ if_attach (ifp); ether_ifattach (ifp); return 1; } /*********************************************************************** * Function: uti596_start * * Description: * start the driver * * Algorithm: * send an event to the tx task * set the if_flags * ***********************************************************************/ static void uti596_start( struct ifnet *ifp ) { uti596_softc_ *sc = ifp->if_softc; #ifdef DBG_START printk(("uti596_start: begins\n")) #endif rtems_event_send (sc->txDaemonTid, START_TRANSMIT_EVENT); ifp->if_flags |= IFF_OACTIVE; } /*********************************************************************** * Function: uti596_init * * Description: * driver initialization * * Algorithm: * initialize the 82596 * start driver tx and rx tasks, and reset task * send the RX_START command the the RU * set if_flags * * ***********************************************************************/ void uti596_init( void * arg ) { uti596_softc_ *sc = arg; struct ifnet *ifp = &sc->arpcom.ac_if; if (sc->txDaemonTid == 0) { /* * Initialize the 82596 */ #ifdef DBG_INIT printk(("uti596_init: begins\nuti596_init: initializing the 82596...\n")) #endif uti596_initialize_hardware(sc); /* * Start driver tasks */ #ifdef DBG_INIT printk(("uti596_init: starting driver tasks...\n")) #endif sc->txDaemonTid = rtems_bsdnet_newproc ("UTtx", 2*4096, uti596_txDaemon, sc); sc->rxDaemonTid = rtems_bsdnet_newproc ("UTrx", 2*4096, uti596_rxDaemon, sc); sc->resetDaemonTid = rtems_bsdnet_newproc ("UTrt", 2*4096, uti596_resetDaemon, sc); #ifdef DBG_INIT printk(("uti596_init: After attach, status of board = 0x%x\n", sc->scb.status )) #endif } /* * Enable receiver */ #ifdef DBG_INIT printk(("uti596_init: enabling the reciever...\n" )) #endif sc->scb.command = RX_START; uti596_issueCA ( sc, UTI596_WAIT_FOR_CU_ACCEPT ); /* * Tell the world that we're running. */ ifp->if_flags |= IFF_RUNNING; #ifdef DBG_INIT printk(("uti596_init: completed.\n")) #endif } /*********************************************************************** * Function: uti596stop * * Description: * stop the driver * * Algorithm: * mark driver as not started, * mark transmitter as busy * abort any transmissions/receptions * clean-up all buffers ( RFD's et. al. ) * * ***********************************************************************/ /* static */ void uti596_stop( uti596_softc_ *sc ) { struct ifnet *ifp = &sc->arpcom.ac_if; ifp->if_flags &= ~IFF_RUNNING; sc->started = 0; #ifdef DBG_STOP printk(("uti596stop: %s: Shutting down ethercard, status was %4.4x.\n", uti596_softc.arpcom.ac_if.if_name, uti596_softc.scb.status)) #endif printk(("Stopping interface\n")) sc->scb.command = CUC_ABORT | RX_ABORT; i82596->chan_attn = 0x00000000; } /*********************************************************************** * Function: void uti596_txDaemon * * Description: Transmit task * * Algorithm: Get mbufs to be transmitted, stuff into RFDs, send * ***********************************************************************/ void uti596_txDaemon( void *arg ) { uti596_softc_ *sc = (uti596_softc_ *)arg; struct ifnet *ifp = &sc->arpcom.ac_if; struct mbuf *m; rtems_event_set events; for (;;) { /* * Wait for packet from stack */ rtems_bsdnet_event_receive (START_TRANSMIT_EVENT, RTEMS_EVENT_ANY | RTEMS_WAIT, RTEMS_NO_TIMEOUT, &events); /* * Send packets till queue is empty. * Ensure that irq is on before sending. */ for (;;) { /* Get the next mbuf chain to transmit. */ IF_DEQUEUE(&ifp->if_snd, m); if (!m) break; send_packet (ifp, m); /* blocks */ } ifp->if_flags &= ~IFF_OACTIVE; /* no more to send, mark output inactive */ } } /*********************************************************************** * Function: uti596_rxDaemon * * Description: Receiver task * * Algorithm: Extract the packet from an RFD, and place into an * mbuf chain. Place the mbuf chain in the network task * queue. Assumes that the frame check sequence is removed * by the 82596. * ***********************************************************************/ /* static */ void uti596_rxDaemon( void *arg ) { uti596_softc_ *sc = (uti596_softc_ *)arg; struct ifnet *ifp = &sc->arpcom.ac_if; struct mbuf *m; i596_rfd *pRfd; ISR_Level level; int tid; rtems_event_set events; struct ether_header *eh; int frames = 0; #ifdef DBG_RX printk(("uti596_rxDaemon: begin\n")) printk(("&scb = %p, pRfd = %p\n", &sc->scb,sc->scb.pRfd)) #endif rtems_task_ident (0, 0, &tid); for(;;) { /* * Wait for packet. */ #ifdef DBG_RX printk(("uti596_rxDaemon: Receiver sleeps\n")) #endif rtems_bsdnet_event_receive (INTERRUPT_EVENT, RTEMS_WAIT|RTEMS_EVENT_ANY, RTEMS_NO_TIMEOUT, &events); #ifdef DBG_RX printk(("uti596_rxDaemon: Receiver wakes\n")) #endif /* * While received frames are available. Note that the frame may be * a fragment, so it is NOT a complete packet. */ pRfd = uti596_dequeue( &sc->pInboundFrameQueue); while ( pRfd && pRfd != I596_NULL && pRfd -> stat & STAT_C ) { if ( pRfd->stat & STAT_OK) { /* a good frame */ int pkt_len = pRfd->count & 0x3fff; /* the actual # of bytes received */ #ifdef DBG_RX printk(("uti596_rxDaemon: Good frame, @%p, data @%p length %d\n", pRfd, pRfd -> data , pkt_len)) #endif frames++; /* * Allocate an mbuf to give to the stack * The format of the data portion of the RFD is: * <ethernet header, payload>. * The FRAME CHECK SEQUENCE / CRC is stripped by the uti596. * This is to be optimized later.... should not have to memcopy! */ MGETHDR(m, M_WAIT, MT_DATA); MCLGET(m, M_WAIT); m->m_pkthdr.rcvif = ifp; /* move everything into an mbuf */ memcpy(m->m_data, pRfd->data, pkt_len); m->m_len = m->m_pkthdr.len = pkt_len - sizeof(struct ether_header) - 4; /* move the header to an mbuf */ eh = mtod (m, struct ether_header *); m->m_data += sizeof(struct ether_header); #ifdef DBG_PACKETS { int i; printk(("uti596_rxDaemon: mbuf contains:\n")) print_eth( (char *) (((int)m->m_data)-sizeof(struct ether_header))); for ( i = 0; i<20; i++) { printk((".")) } } #endif ether_input (ifp, eh, m); } /* end if STAT_OK */ else { /* * A bad frame is present: Note that this could be the last RFD! */ #ifdef DBG_RX printk(("uti596_rxDaemon: Bad frame\n")) #endif /* * FIX ME: use the statistics from the SCB */ sc->stats.rx_errors++; if ((sc->scb.pRfd->stat) & 0x0001) sc->stats.collisions++; if ((sc->scb.pRfd->stat) & 0x0080) sc->stats.rx_length_errors++; if ((sc->scb.pRfd->stat) & 0x0100) sc->stats.rx_over_errors++; if ((sc->scb.pRfd->stat) & 0x0200) sc->stats.rx_fifo_errors++; if ((sc->scb.pRfd->stat) & 0x0400) sc->stats.rx_frame_errors++; if ((sc->scb.pRfd->stat) & 0x0800) sc->stats.rx_crc_errors++; if ((sc->scb.pRfd->stat) & 0x1000) sc->stats.rx_length_errors++; } UTI_596_ASSERT(pRfd != I596_NULL, "Supplying NULL RFD\n") _ISR_Disable(level); uti596_supplyFD ( pRfd ); /* Return RFD to RFA. */ _ISR_Enable(level); pRfd = uti596_dequeue( &sc->pInboundFrameQueue); /* grab next frame */ } /* end while */ } /* end for() */ #ifdef DBG_RX printk (("uti596_rxDaemon: frames ... %d\n", frames)) #endif } /*********************************************************************** * Function: void uti596_resetDaemon * * Description: ***********************************************************************/ void uti596_resetDaemon( void *arg ) { uti596_softc_ *sc = (uti596_softc_ *)arg; rtems_event_set events; rtems_time_of_day tm_struct; /* struct ifnet *ifp = &sc->arpcom.ac_if; */ for (;;) { /* Wait for reset event from ISR */ rtems_bsdnet_event_receive (NIC_RESET_EVENT, RTEMS_EVENT_ANY | RTEMS_WAIT, RTEMS_NO_TIMEOUT, &events); rtems_clock_get(RTEMS_CLOCK_GET_TOD, &tm_struct); printk(("reset daemon: Resetting NIC @ %d:%d:%d \n", tm_struct.hour, tm_struct.minute, tm_struct.second)) sc->stats.nic_reset_count++; /* Reinitialize the LANC */ rtems_bsdnet_semaphore_obtain (); uti596_reset(); rtems_bsdnet_semaphore_release (); } } /*********************************************************************** * Function: uti596_DynamicInterruptHandler * * Description: * This is the interrupt handler for the uti596 board * ***********************************************************************/ /* static */ rtems_isr uti596_DynamicInterruptHandler( rtems_vector_number irq ) { #ifdef DBG_ISR printk(("uti596_DynamicInterruptHandler: begins")) #endif uti596_wait (&uti596_softc, UTI596_WAIT_FOR_CU_ACCEPT); scbStatus = uti596_softc.scb.status & 0xf000; if ( scbStatus ) { /* acknowledge interrupts */ /* Write to the ICLR bit in the PCCchip2 control registers to clear * the INT status bit. Clearing INT here *before* sending the CA signal * to the 82596 should ensure that interrupts won't be lost. */ pccchip2->LANC_int_ctl |=0x08; pccchip2->LANC_berr_ctl |=0x08; /* printk(("***INFO: ACK %x\n", scbStatus))*/ /* Send the CA signal to acknowledge interrupt */ uti596_softc.scb.command = scbStatus; uti596_issueCA ( &uti596_softc, UTI596_NO_WAIT ); if( uti596_softc.resetDone ) { /* stack is attached */ uti596_wait ( &uti596_softc, UTI596_WAIT_FOR_CU_ACCEPT ); } else { printk(("***INFO: ACK'd w/o processing. status = %x\n", scbStatus)) return; } } else { printk(("\n***ERROR: Spurious interrupt. Resetting...\n")) uti596_softc.nic_reset = 1; } if ( (scbStatus & SCB_STAT_CX) && !(scbStatus & SCB_STAT_CNA) ) { printk(("\n*****ERROR: Command Complete, and CNA available: 0x%x\nResetting...", scbStatus)) uti596_softc.nic_reset = 1; return; } if ( !(scbStatus & SCB_STAT_CX) && (scbStatus & SCB_STAT_CNA) ) { printk(("\n*****ERROR: CNA, NO CX:0x%x\nResetting...",scbStatus)) uti596_softc.nic_reset = 1; return; } if ( scbStatus & SCB_CUS_SUSPENDED ) { printk(("\n*****ERROR: Command unit suspended!:0x%x\nResetting...",scbStatus)) uti596_softc.nic_reset = 1; return; } if ( scbStatus & RU_SUSPENDED ) { printk(("\n*****ERROR: Receive unit suspended!:0x%x\nResetting...",scbStatus)) uti596_softc.nic_reset = 1; return; } if ( scbStatus & SCB_STAT_RNR ) { printk(("\n*****WARNING: RNR %x\n",scbStatus)) if (uti596_softc.pBeginRFA != I596_NULL) { printk(("*****INFO: RFD cmd: %x status:%x\n", uti596_softc.pBeginRFA->cmd, uti596_softc.pBeginRFA->stat)) } else { printk(("*****WARNING: RNR condition with NULL BeginRFA\n")) } } /* * Receive Unit Control * a frame is received */ if ( scbStatus & SCB_STAT_FR ) { uti596_softc.rxInterrupts++; #ifdef DBG_ISR printk(("uti596_DynamicInterruptHandler: Frame received\n")) #endif if ( uti596_softc.pBeginRFA == I596_NULL || !( uti596_softc.pBeginRFA -> stat & STAT_C)) { uti596_dump_scb(); uti596_softc.nic_reset = 1; } else { while ( uti596_softc.pBeginRFA != I596_NULL && ( uti596_softc.pBeginRFA -> stat & STAT_C)) { #ifdef DBG_ISR printk(("uti596_DynamicInterruptHandler: pBeginRFA != NULL\n")) #endif count_rx ++; if ( count_rx > 1) { printk(("****WARNING: Received 2 frames on 1 interrupt \n")) } /* Give Received Frame to the ULCS */ uti596_softc.countRFD--; if ( uti596_softc.countRFD < 0 ) { printk(("ISR: Count < 0 !!! count == %d, beginRFA = %p\n", uti596_softc.countRFD, uti596_softc.pBeginRFA)) } uti596_softc.stats.rx_packets++; /* the rfd next link is stored with upper and lower words swapped so read it that way */ pIsrRfd = (i596_rfd *) word_swap ((unsigned long)uti596_softc.pBeginRFA->next); /* the append destroys the link */ uti596_append( &uti596_softc.pInboundFrameQueue , uti596_softc.pBeginRFA ); /* * if we have just received the a frame in the last unknown RFD, * then it is certain that the RFA is empty. */ if ( uti596_softc.pLastUnkRFD == uti596_softc.pBeginRFA ) { UTI_596_ASSERT(uti596_softc.pLastUnkRFD != I596_NULL,"****ERROR:LastUnk is NULL, begin ptr @ end!\n") uti596_softc.pEndRFA = uti596_softc.pLastUnkRFD = I596_NULL; } #ifdef DBG_ISR printk(("uti596_DynamicInterruptHandler: Wake %#x\n",uti596_softc.rxDaemonTid)) #endif sc = rtems_event_send(uti596_softc.rxDaemonTid, INTERRUPT_EVENT); if ( sc != RTEMS_SUCCESSFUL ) { rtems_panic("Can't notify rxDaemon: %s\n", rtems_status_text (sc)); } #ifdef DBG_ISR else { printk(("uti596_DynamicInterruptHandler: Rx Wake: %#x\n",uti596_softc.rxDaemonTid)) } #endif uti596_softc.pBeginRFA = pIsrRfd; } /* end while */ } /* end if */ if ( uti596_softc.pBeginRFA == I596_NULL ) { /* adjust the pEndRFA to reflect an empty list */ if ( uti596_softc.pLastUnkRFD == I596_NULL && uti596_softc.countRFD != 0 ) { printk(("Last Unk is NULL, BeginRFA is null, and count == %d\n", uti596_softc.countRFD)) } uti596_softc.pEndRFA = I596_NULL; if ( uti596_softc.countRFD != 0 ) { printk(("****ERROR:Count is %d, but begin ptr is NULL\n", uti596_softc.countRFD )) } } } /* end if ( scbStatus & SCB_STAT_FR ) */ /* * Command Unit Control * a command is completed */ if ( scbStatus & SCB_STAT_CX ) { #ifdef DBG_ISR printk(("uti596_DynamicInterruptHandler: CU\n")) #endif pIsrCmd = uti596_softc.pCmdHead; /* For ALL completed commands */ if ( pIsrCmd != I596_NULL && pIsrCmd->status & STAT_C ) { #ifdef DBG_ISR printk(("uti596_DynamicInterruptHandler: pIsrCmd != NULL\n")) #endif /* Adjust the command block list */ uti596_softc.pCmdHead = (i596_cmd *) word_swap ((unsigned long)pIsrCmd->next); /* * If there are MORE commands to process, * the serialization in the raw routine has failed. * ( Perhaps AddCmd is bad? ) */ UTI_596_ASSERT(uti596_softc.pCmdHead == I596_NULL, "****ERROR: command serialization failed\n") /* What if the command did not complete OK? */ switch ( pIsrCmd->command & 0x7) { case CmdConfigure: uti596_softc.cmdOk = 1; break; case CmdDump: #ifdef DBG_ISR printk(("uti596_DynamicInterruptHandler: dump!\n")) #endif uti596_softc.cmdOk = 1; break; case CmdDiagnose: #ifdef DBG_ISR printk(("uti596_DynamicInterruptHandler: diagnose!\n")) #endif uti596_softc.cmdOk = 1; break; case CmdSASetup: /* printk(("****INFO:Set address interrupt\n")) */ if ( pIsrCmd -> status & STAT_OK ) { uti596_softc.cmdOk = 1; } else { printk(("****ERROR:SET ADD FAILED\n")) } break; case CmdTx: UTI_596_ASSERT(uti596_softc.txDaemonTid, "****ERROR:Null txDaemonTid\n") #ifdef DBG_ISR printk(("uti596_DynamicInterruptHandler: wake TX:0x%x\n",uti596_softc.txDaemonTid)) #endif if ( uti596_softc.txDaemonTid ) { /* Ensure that the transmitter is present */ sc = rtems_event_send (uti596_softc.txDaemonTid, INTERRUPT_EVENT); if ( sc != RTEMS_SUCCESSFUL ) { printk(("****ERROR:Could NOT send event to tid 0x%x : %s\n", uti596_softc.txDaemonTid, rtems_status_text (sc) )) } #ifdef DBG_ISR else { printk(("****INFO:Tx wake: %#x\n",uti596_softc.txDaemonTid)) } #endif } break; case CmdMulticastList: printk(("***ERROR:Multicast?!\n")) pIsrCmd->next = I596_NULL; break; case CmdTDR: { unsigned long status = *( (unsigned long *)pIsrCmd)+1; printk(("****ERROR:TDR?!\n")) if (status & STAT_C) { /* mark the TDR command successful */ uti596_softc.cmdOk = 1; } else { if (status & 0x4000) { printk(("****WARNING:Transceiver problem.\n")) } if (status & 0x2000) { printk(("****WARNING:Termination problem.\n")) } if (status & 0x1000) { printk(("****WARNING:Short circuit.\n")) /* printk(("****INFO:Time %ld.\n", status & 0x07ff)) */ } } } break; default: { /* * This should never be reached */ printk(("CX but NO known command\n")) } } /* end switch */ pIsrCmd = uti596_softc.pCmdHead; /* next command */ if ( pIsrCmd != I596_NULL ) { printk(("****WARNING: more commands in list, but no start to NIC\n")) } } /* end if pIsrCmd != NULL && pIsrCmd->stat & STAT_C */ else { if ( pIsrCmd != I596_NULL ) { /* The command MAY be NULL from a RESET */ /* Reset the ethernet card, and wake the transmitter (if necessary) */ printk(("****INFO: Request board reset ( tx )\n")) uti596_softc.nic_reset = 1; if ( uti596_softc.txDaemonTid) { /* Ensure that a transmitter is present */ sc = rtems_event_send (uti596_softc.txDaemonTid, INTERRUPT_EVENT); if ( sc != RTEMS_SUCCESSFUL ) { printk(("****ERROR:Could NOT send event to tid 0x%x : %s\n", uti596_softc.txDaemonTid, rtems_status_text (sc) )) } #ifdef DBG_ISR else { printk(("uti596_DynamicInterruptHandler: ****INFO:Tx wake: %#x\n", uti596_softc.txDaemonTid)) } #endif } } } } /* end if command complete */ /* * If the receiver has stopped, * check if this is a No Resources scenario, * Try to add more RFD's ( no RBDs are used ) */ if ( uti596_softc.started ) { if ( scbStatus & SCB_STAT_RNR ) { #ifdef DBG_ISR printk(("uti596_DynamicInterruptHandler: INFO:RNR: status %#x \n", uti596_softc.scb.status )) #endif /* * THE RECEIVER IS OFF! */ if ( uti596_softc.pLastUnkRFD != I596_NULL ) { /* We have an unknown RFD, it is not inbound */ if ( uti596_softc.pLastUnkRFD -> stat & (STAT_C | STAT_B )) { /* in use */ uti596_softc.pEndRFA = uti596_softc.pLastUnkRFD; /* update end */ } else { /* * It is NOT in use, and since RNR, we know EL bit of pEndRFA was read! * So, unlink it from the RFA and move it to the saved queue. * But pBegin can equal LastUnk! */ if ( uti596_softc.pEndRFA != I596_NULL ) { /* check added feb24. */ #ifdef DBG_ISR if ((i596_rfd *)word_swap((unsigned long)uti596_softc.pEndRFA->next) != uti596_softc.pLastUnkRFD) { printk(("***ERROR:UNK: %p not end->next: %p, end: %p\n", uti596_softc.pLastUnkRFD, uti596_softc.pEndRFA -> next, uti596_softc.pEndRFA)) printk(("***INFO:countRFD now %d\n", uti596_softc.countRFD)) printk(("\n\n")) } #endif uti596_softc.pEndRFA -> next = I596_NULL; /* added feb 16 */ } uti596_append( &uti596_softc.pSavedRfdQueue, uti596_softc.pLastUnkRFD ); uti596_softc.savedCount++; uti596_softc.pEndSavedQueue = uti596_softc.pLastUnkRFD; uti596_softc.countRFD--; /* It was not in the RFA */ /* * The Begin pointer CAN advance this far. We must resynch the CPU side * with the chip. */ if ( uti596_softc.pBeginRFA == uti596_softc.pLastUnkRFD ) { #ifdef DBG_ISR if ( uti596_softc.countRFD != 0 ) { printk(("****INFO:About to set begin to NULL, with count == %d\n\n", uti596_softc.countRFD )) } #endif uti596_softc.pBeginRFA = I596_NULL; UTI_596_ASSERT(uti596_softc.countRFD == 0, "****ERROR:Count must be zero here!\n") } } uti596_softc.pLastUnkRFD = I596_NULL; } /* end if exists UnkRFD */ /* * Append the saved queue to the RFA. * Any further RFD's being supplied will be added to * this new list. */ if ( uti596_softc.pSavedRfdQueue != I596_NULL ) { /* entries to add */ if ( uti596_softc.pBeginRFA == I596_NULL ) { /* add at beginning to list */ #ifdef DBG_ISR if(uti596_softc.countRFD != 0) { printk(("****ERROR:Begin pointer is NULL, but count == %d\n", uti596_softc.countRFD)) } #endif uti596_softc.pBeginRFA = uti596_softc.pSavedRfdQueue; uti596_softc.pEndRFA = uti596_softc.pEndSavedQueue; uti596_softc.pSavedRfdQueue = uti596_softc.pEndSavedQueue = I596_NULL; /* Reset the End */ } else { #ifdef DBG_ISR if ( uti596_softc.countRFD <= 0) { printk(("****ERROR:Begin pointer is not NULL, but count == %d\n", uti596_softc.countRFD)) } #endif UTI_596_ASSERT( uti596_softc.pEndRFA != I596_NULL, "****WARNING: END RFA IS NULL\n") UTI_596_ASSERT( uti596_softc.pEndRFA->next == I596_NULL, "****ERROR:END RFA -> next must be NULL\n") uti596_softc.pEndRFA->next = (i596_rfd *)word_swap((unsigned long)uti596_softc.pSavedRfdQueue); uti596_softc.pEndRFA->cmd &= ~CMD_EOL; /* clear the end of list */ uti596_softc.pEndRFA = uti596_softc.pEndSavedQueue; uti596_softc.pSavedRfdQueue = uti596_softc.pEndSavedQueue = I596_NULL; /* Reset the End */ #ifdef DBG_ISR printk(("uti596_DynamicInterruptHandler: count... %d, saved ... %d \n", uti596_softc.countRFD, uti596_softc.savedCount)) #endif } /* printk(("Isr: countRFD = %d\n",uti596_softc.countRFD)) */ uti596_softc.countRFD += uti596_softc.savedCount; /* printk(("Isr: after countRFD = %d\n",uti596_softc.countRFD)) */ uti596_softc.savedCount = 0; } #ifdef DBG_ISR printk(("uti596_DynamicInterruptHandler: The list starts here %p\n",uti596_softc.pBeginRFA )) #endif if ( uti596_softc.countRFD > 1) { printk(("****INFO: pBeginRFA -> stat = 0x%x\n",uti596_softc.pBeginRFA -> stat)) printk(("****INFO: pBeginRFA -> cmd = 0x%x\n",uti596_softc.pBeginRFA -> cmd)) uti596_softc.pBeginRFA -> stat = 0; UTI_596_ASSERT(uti596_softc.scb.command == 0, "****ERROR:scb command must be zero\n") uti596_softc.scb.pRfd = uti596_softc.pBeginRFA; uti596_softc.scb.rfd_pointer = word_swap((unsigned long)uti596_softc.pBeginRFA); /* start RX here */ printk(("****INFO: ISR Starting receiver\n")) uti596_softc.scb.command = RX_START; /* should this also be CU start? */ i82596->chan_attn = 0x00000000; } } /* end stat_rnr */ } /* end if receiver started */ #ifdef DBG_ISR printk(("uti596_DynamicInterruptHandler: X\n")) #endif count_rx=0; /* Do this last, to ensure that the reset is called at the right time. */ if ( uti596_softc.nic_reset ) { uti596_softc.nic_reset = 0; sc = rtems_event_send(uti596_softc.resetDaemonTid, NIC_RESET_EVENT); if ( sc != RTEMS_SUCCESSFUL ) rtems_panic ("Can't notify resetDaemon: %s\n", rtems_status_text (sc)); } return; } /*********************************************************************** * Function: uti596_ioctl * * Description: * driver ioctl function * handles SIOCGIFADDR, SIOCSIFADDR, SIOCSIFFLAGS * ***********************************************************************/ static int uti596_ioctl( struct ifnet *ifp, int command, caddr_t data ) { uti596_softc_ *sc = ifp->if_softc; int error = 0; #ifdef DBG_IOCTL printk(("uti596_ioctl: begins\n", sc->pScp)) #endif switch (command) { case SIOCGIFADDR: case SIOCSIFADDR: printk(("SIOCSIFADDR\n")) ether_ioctl (ifp, command, data); break; case SIOCSIFFLAGS: printk(("SIOCSIFFLAGS\n")) switch (ifp->if_flags & (IFF_UP | IFF_RUNNING)) { case IFF_RUNNING: printk(("IFF_RUNNING\n")) uti596_stop (sc); break; case IFF_UP: printk(("IFF_UP\n")) uti596_init (sc); break; case IFF_UP | IFF_RUNNING: printk(("IFF_UP and RUNNING\n")) uti596_stop (sc); uti596_init (sc); break; default: printk(("default\n")) break; } break; case SIO_RTEMS_SHOW_STATS: printk(("show stats\n")) uti596_stats (sc); break; /* FIXME: All sorts of multicast commands need to be added here! */ default: printk(("default: EINVAL\n")) error = EINVAL; break; } return error; } /*********************************************************************** * Function: uti596_stats * * Description: * print out the collected data * * Algorithm: * use printf * ***********************************************************************/ void uti596_stats( uti596_softc_ *sc ) { printf ("CPU Reports:\n"); printf (" Tx raw send count:%-8lu", sc->rawsndcnt); printf (" Rx Interrupts:%-8lu", sc->rxInterrupts); printf (" Tx Interrupts:%-8lu\n", sc->txInterrupts); printf (" Rx Packets:%-8u", sc->stats.rx_packets); printf (" Tx Attempts:%-u\n", sc->stats.tx_packets); printf (" Rx Dropped:%-8u", sc->stats.rx_dropped); printf (" Rx IP Packets:%-8u", sc->stats.rx_packets); printf (" Tx Errors:%-8u\n", sc->stats.tx_errors); printf (" Tx aborted:%-8u", sc->stats.tx_aborted_errors); printf (" Tx Dropped:%-8u\n", sc->stats.tx_dropped); printf (" Tx IP packets:%-8u", sc->stats.tx_packets); printf (" Collisions Detected:%-8u\n", sc->stats.collisions); printf (" Tx Heartbeat Errors:%-8u", sc->stats.tx_heartbeat_errors); printf (" Tx Carrier Errors:%-8u\n", sc->stats.tx_carrier_errors); printf (" Tx Aborted Errors:%-8u", sc->stats.tx_aborted_errors); printf (" Rx Length Errors:%-8u\n", sc->stats.rx_length_errors); printf (" Rx Overrun Errors:%-8u", sc->stats.rx_over_errors); printf (" Rx Fifo Errors:%-8u\n", sc->stats.rx_fifo_errors); printf (" Rx Framing Errors:%-8u", sc->stats.rx_frame_errors); printf (" Rx crc errors:%-8u\n", sc->stats.rx_crc_errors); printf (" TX WAITS: %-8lu\n", sc->txRawWait); printf (" NIC resets: %-8u\n", sc->stats.nic_reset_count); printf (" NIC reports\n"); #ifdef DBG_STAT uti596_dump_scb(); #endif } /************************ PACKET DEBUG ROUTINES ************************/ #ifdef DBG_PACKETS /* * dumpQ * * Dumps frame queues for debugging */ static void dumpQ( void ) { i596_rfd *pRfd; printk(("savedQ:\n")) for( pRfd = uti596_softc.pSavedRfdQueue; pRfd != I596_NULL; pRfd = pRfd -> next) { printk(("pRfd: %p, stat: 0x%x cmd: 0x%x\n",pRfd,pRfd -> stat,pRfd -> cmd)) } printk(("Inbound:\n")) for( pRfd = uti596_softc.pInboundFrameQueue; pRfd != I596_NULL; pRfd = pRfd -> next) { printk(("pRfd: %p, stat: 0x%x cmd: 0x%x\n",pRfd,pRfd -> stat,pRfd -> cmd)) } printk(("Last Unk: %p\n", uti596_softc.pLastUnkRFD )) printk(("RFA:\n")) for( pRfd = uti596_softc.pBeginRFA; pRfd != I596_NULL; pRfd = pRfd -> next) { printk(("pRfd: %p, stat: 0x%x cmd: 0x%x\n",pRfd,pRfd -> stat,pRfd -> cmd)) } } /* * show_buffers * * Print out the RFA and frame queues */ static void show_buffers (void) { i596_rfd *pRfd; printk(("82596 cmd: 0x%x, status: 0x%x RFA len: %d\n", uti596_softc.scb.command, uti596_softc.scb.status, uti596_softc.countRFD)) printk(("\nRFA: \n")) for ( pRfd = uti596_softc.pBeginRFA; pRfd != I596_NULL; pRfd = pRfd->next) { printk(("Frame @ %p, status: %2.2x, cmd: %2.2x\n", pRfd, pRfd->stat, pRfd->cmd)) } printk(("\nInbound: \n")) for ( pRfd = uti596_softc.pInboundFrameQueue; pRfd != I596_NULL; pRfd = pRfd->next) { printk(("Frame @ %p, status: %2.2x, cmd: %2.2x\n", pRfd, pRfd->stat, pRfd->cmd)) } printk(("\nSaved: \n")) for ( pRfd = uti596_softc.pSavedRfdQueue; pRfd != I596_NULL; pRfd = pRfd->next) { printk(("Frame @ %p, status: %2.2x, cmd: %2.2x\n", pRfd, pRfd->stat, pRfd->cmd)) } printk(("\nUnknown: %p\n",uti596_softc.pLastUnkRFD)) } /* * show_queues * * Print out the saved frame queue and the RFA */ static void show_queues(void) { i596_rfd *pRfd; printk(("CMD: 0x%x, Status: 0x%x\n", uti596_softc.scb.command, uti596_softc.scb.status)) printk(("saved Q\n")) for ( pRfd = uti596_softc.pSavedRfdQueue; pRfd != I596_NULL && pRfd != NULL; pRfd = pRfd->next) { printk(("0x%p\n", pRfd)) } printk(("End saved Q 0x%p\n", uti596_softc.pEndSavedQueue)) printk(("\nRFA:\n")) for ( pRfd = uti596_softc.pBeginRFA; pRfd != I596_NULL && pRfd != NULL; pRfd = pRfd->next) { printk(("0x%p\n", pRfd)) } printk(("uti596_softc.pEndRFA: %p\n",uti596_softc.pEndRFA)) } /* * print_eth * * Print the contents of an ethernet packet * CANNOT BE CALLED FROM ISR */ static void print_eth( unsigned char *add ) { int i; short int length; printk (("Packet Location %p\n", add)) printk (("Dest ")) for (i = 0; i < 6; i++) { printk ((" %2.2X", add[i])) } printk (("\n")) printk (("Source")) for (i = 6; i < 12; i++) { printk ((" %2.2X", add[i])) } printk (("\n")) printk (("frame type %2.2X%2.2X\n", add[12], add[13])) if ( add[12] == 0x08 && add[13] == 0x06 ) { /* an ARP */ printk (("Hardware type : %2.2X%2.2X\n", add[14],add[15])) printk (("Protocol type : %2.2X%2.2X\n", add[16],add[17])) printk (("Hardware size : %2.2X\n", add[18])) printk (("Protocol size : %2.2X\n", add[19])) printk (("op : %2.2X%2.2X\n", add[20],add[21])) printk (("Sender Enet addr: ")) for ( i=0; i< 5 ; i++) { printk (("%x:", add[22 + i])) } printk (("%x\n", add[27])) printk (("Sender IP addr: ")) for ( i=0; i< 3 ; i++) { printk (("%u.", add[28 + i])) } printk (("%u\n", add[31])) printk (("Target Enet addr: ")) for ( i=0; i< 5 ; i++) { printk (( "%x:", add[32 + i])) } printk (("%x\n", add[37])) printk (("Target IP addr: ")) for ( i=0; i< 3 ; i++) { printk (( "%u.", add[38 + i])) } printk (("%u\n", add[41])) } if ( add[12] == 0x08 && add[13] == 0x00 ) { /* an IP packet */ printk (("*********************IP HEADER******************\n")) printk (("IP version/IPhdr length: %2.2X TOS: %2.2X\n", add[14] , add[15])) printk (("IP total length: %2.2X %2.2X, decimal %d\n", add[16], add[17], length = (add[16]<<8 | add[17] ))) printk (("IP identification: %2.2X %2.2X, 3-bit flags and offset %2.2X %2.2X\n", add[18],add[19], add[20], add[21])) printk (("IP TTL: %2.2X, protocol: %2.2X, checksum: %2.2X %2.2X \n", add[22],add[23],add[24],add[25])) printk (("IP packet type: %2.2X code %2.2X\n", add[34],add[35])) printk (("Source IP address: ")) for ( i=0; i< 3 ; i++) { printk (("%u.", add[26 + i])) } printk (("%u\n", add[29])) printk (("Destination IP address: ")) for ( i=0; i< 3 ; i++) { printk (("%u.", add[30 + i])) } printk (("%u\n", add[33])) } } /* * print_hdr * * Print the contents of an ethernet packet header * CANNOT BE CALLED FROM ISR */ static void print_hdr( unsigned char *add ) { int i; printk (("print_hdr: begins\n")) printk (("Header Location %p\n", add)) printk (("Dest ")) for (i = 0; i < 6; i++) { printk ((" %2.2X", add[i])) } printk (("\nSource")) for (i = 6; i < 12; i++) { printk ((" %2.2X", add[i])) } printk (("\nframe type %2.2X%2.2X\n", add[12], add[13])) printk (("print_hdr: completed")) } /* * Function: print_pkt * * Print the contents of an ethernet packet & data * CANNOT BE CALLED FROM ISR */ static void print_pkt( unsigned char *add ) { int i; short int length; printk (("print_pkt: begins")) printk (("Data Location %p\n", add)) if ( add[0] == 0x08 && add[1] == 0x06 ) { /* an ARP */ printk (("Hardware type : %2.2X%2.2X\n", add[14],add[15])) printk (("Protocol type : %2.2X%2.2X\n", add[16],add[17])) printk (("Hardware size : %2.2X\n", add[18])) printk (("Protocol size : %2.2X\n", add[19])) printk (("op : %2.2X%2.2X\n", add[20],add[21])) printk (("Sender Enet addr: ")) for ( i=0; i< 5 ; i++) { printk (( "%x:", add[22 + i])) } printk (("%x\n", add[27])) printk (("Sender IP addr: ")) for ( i=0; i< 3 ; i++) { printk (("%u.", add[28 + i])) } printk (("%u\n", add[31])) printk (("Target Enet addr: ")) for ( i=0; i< 5 ; i++) { printk (( "%x:", add[32 + i])) } printk (("%x\n", add[37])) printk (("Target IP addr: ")) for ( i=0; i< 3 ; i++) { printk (( "%u.", add[38 + i])) } printk (("%u\n", add[41])) } if ( add[0] == 0x08 && add[1] == 0x00 ) { /* an IP packet */ printk (("*********************IP HEADER******************\n")) printk (("IP version/IPhdr length: %2.2X TOS: %2.2X\n", add[14] , add[15])) printk (("IP total length: %2.2X %2.2X, decimal %d\n", add[16], add[17], length = (add[16]<<8 | add[17] ))) printk (("IP identification: %2.2X %2.2X, 3-bit flags and offset %2.2X %2.2X\n", add[18],add[19], add[20], add[21])) printk (("IP TTL: %2.2X, protocol: %2.2X, checksum: %2.2X %2.2X \n", add[22],add[23],add[24],add[25])) printk (("IP packet type: %2.2X code %2.2X\n", add[34],add[35])) printk (("Source IP address: ")) for ( i=0; i< 3 ; i++) { printk(( "%u.", add[26 + i])) } printk(("%u\n", add[29])) printk(("Destination IP address: ")) for ( i=0; i< 3 ; i++) { printk(( "%u.", add[30 + i])) } printk(("%u\n", add[33])) printk(("********************IP Packet Data*******************\n")) length -=20; for ( i=0; i < length ; i++) { printk(("0x%2.2x ", add[34+i])) } printk(("\n")) printk(("ICMP checksum: %2.2x %2.2x\n", add[36], add[37])) printk(("ICMP identifier: %2.2x %2.2x\n", add[38], add[39])) printk(("ICMP sequence nbr: %2.2x %2.2x\n", add[40], add[41])) printk(("print_pkt: completed")) } } /* * print_echo * * Print the contents of an echo packet * CANNOT BE CALLED FROM ISR */ static void print_echo( unsigned char *add ) { int i; short int length; printk (("print_echo: begins")) if ( add[12] == 0x08 && add[13] == 0x00 ) { /* an IP packet */ printk (("Packet Location %p\n", add)) printk (("Dest ")) for (i = 0; i < 6; i++) { printk ((" %2.2X", add[i])) } printk (("\n")) printk (("Source")) for (i = 6; i < 12; i++) { printk ((" %2.2X", add[i])) } printk (("\n")) printk (("frame type %2.2X%2.2X\n", add[12], add[13])) printk (("*********************IP HEADER******************\n")) printk (("IP version/IPhdr length: %2.2X TOS: %2.2X\n", add[14] , add[15])) printk (("IP total length: %2.2X %2.2X, decimal %d\n", add[16], add[17], length = (add[16]<<8 | add[17] ))) printk (("IP identification: %2.2X %2.2X, 3-bit flags and offset %2.2X %2.2X\n", add[18],add[19], add[20], add[21])) printk (("IP TTL: %2.2X, protocol: %2.2X, checksum: %2.2X %2.2X \n", add[22],add[23],add[24],add[25])) printk (("IP packet type: %2.2X code %2.2X\n", add[34],add[35])) printk (("Source IP address: ")) for ( i=0; i< 3 ; i++) { printk (("%u.", add[26 + i])) } printk (("%u\n", add[29])) printk (("Destination IP address: ")) for ( i=0; i< 3 ; i++) { printk (("%u.", add[30 + i])) } printk (("%u\n", add[33])) printk(("********************IP Packet Data*******************\n")) length -=20; for ( i=0; i < length ; i++) { printk(("0x%2.2x ", add[34+i])) } printk(("\n")) printk(("ICMP checksum: %2.2x %2.2x\n", add[36], add[37])) printk(("ICMP identifier: %2.2x %2.2x\n", add[38], add[39])) printk(("ICMP sequence nbr: %2.2x %2.2x\n", add[40], add[41])) printk(("print_echo: completed")) } } #endif
Go to most recent revision | Compare with Previous | Blame | View Log