Subversion Repositories openrisc

/*
 *  This routine starts the application.  It includes application,
 *  board, and monitor specific initialization and configuration.
 *  The generic CPU dependent initialization has been performed
 *  before this routine is invoked.
 *
 *  COPYRIGHT (c) 1989-1999.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  $Id: bspstart.c,v 1.2 2001-09-27 12:00:25 chris Exp $
 */
 
/*
 *  Rather than deleting this, it is commented out to (hopefully) help
 *  the submitter send updates.
 *
 *  static char _sccsid[] = "@(#)bspstart.c 06/11/96     1.2\n";
 */
 
 
#include <bsp.h>
#include <rtems/libio.h>
 
#include <libcsupport.h>
 
#include <string.h>
 
/*
 *  The original table from the application and our copy of it with
 *  some changes.
 */
 
extern rtems_configuration_table Configuration;
 
rtems_configuration_table  BSP_Configuration;
 
rtems_cpu_table Cpu_table;
 
char *rtems_progname;
 
/*
 *  Use the shared implementations of the following routines
 */
 
void bsp_postdriver_hook(void);
void bsp_libc_init( void *, unsigned32, int );
 
/*
 *  Function:   bsp_pretasking_hook
 *  Created:    95/03/10
 *
 *  Description:
 *      BSP pretasking hook.  Called just before drivers are initialized.
 *      Used to setup libc and install any BSP extensions.
 *
 *  NOTES:
 *      Must not use libc (to do io) from here, since drivers are
 *      not yet initialized.
 *
 */
 
#define LIBC_HEAP_SIZE (64 * 1024)
 
void bsp_pretasking_hook(void)
{
    extern int end;
    rtems_unsigned32        heap_start;
 
    heap_start = (rtems_unsigned32) &end;
    if (heap_start & (CPU_ALIGNMENT-1))
        heap_start = (heap_start + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1);
 
    bsp_libc_init((void *) heap_start, LIBC_HEAP_SIZE, 0);
 
#ifdef RTEMS_DEBUG
    rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
#endif
}
 
extern int end; /* defined by linker */
 
/*
 *  bsp_start
 *
 *  This routine does the bulk of the system initialization.
 */
 
void bsp_start( void )
{
  /*
   *  Allocate the memory for the RTEMS Work Space.  This can come from
   *  a variety of places: hard coded address, malloc'ed from outside
   *  RTEMS world (e.g. simulator or primitive memory manager), or (as
   *  typically done by stock BSPs) by subtracting the required amount
   *  of work space from the last physical address on the CPU board.
   */
 
  /*
   *  Need to "allocate" the memory for the RTEMS Workspace and
   *  tell the RTEMS configuration where it is.  This memory is
   *  not malloc'ed.  It is just "pulled from the air".
   */
 
  BSP_Configuration.work_space_start =
       (void *)((unsigned64)((&end) + LIBC_HEAP_SIZE + 0x2000) & ~0x7);
 
  /*
   *  initialize the CPU table for this BSP
   */
 
  Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */
  Cpu_table.postdriver_hook = bsp_postdriver_hook;
  Cpu_table.interrupt_stack_size = CONFIGURE_INTERRUPT_STACK_MEMORY;
  Cpu_table.clicks_per_microsecond = CPU_CLOCK_RATE_MHZ;
}