Subversion Repositories openrisc_2011-10-31

/*  dlentry.s   1.0 - 95/08/08
 *
 *  This file contains the entry veneer for RTEMS programs
 *  stored in Papyrus' flash ROM.
 *
 *  Author:     Andrew Bray <andy@i-cubed.co.uk>
 *
 *  COPYRIGHT (c) 1995 by i-cubed ltd.
 *
 *  To anyone who acknowledges that this file is provided "AS IS"
 *  without any express or implied warranty:
 *      permission to use, copy, modify, and distribute this file
 *      for any purpose is hereby granted without fee, provided that
 *      the above copyright notice and this notice appears in all
 *      copies, and that the name of i-cubed limited not be used in
 *      advertising or publicity pertaining to distribution of the
 *      software without specific, written prior permission.
 *      i-cubed limited makes no representations about the suitability
 *      of this software for any purpose.
 *
 *  $Id: flashentry.S,v 1.2 2001-09-27 12:00:41 chris Exp $
 */

#include "asm.h"

/*
 *  The Papyrus ELF link scripts support three special sections:
 *    .entry    The actual entry point, this must contain less
 *              than 256 bytes of code/data to fit below the
 *              .vectors section.  This always preceeds any other
 *              code or data.
 *    .vectors  The section containing the interrupt entry veneers.
 *    .entry2   Any code overflowing from .entry
 *    .descriptors The PowerOpen function indirection blocks.
 */

/*
 *  Flash sections are linked in the following order:
 *    .entry
 *    .vectors
 *    .entry2
 *    .text
 *    .descriptors
 *    .data
 *    .bss
 *  usually starting from 0xFFF00000.
 *
 *  The initial stack is set to run BELOW the final location of
 *  the initialised data.
 *
 *  All the entry veneer has to do is to copy the initialised data
 *  to its final location and clear the BSS.
 */

/*
 *  GDB likes to have debugging information for the entry veneer.
 *  Here is some DWARF information.
 */

#if PPC_ASM == PPC_ASM_ELF
        .section .entry,"ax",@progbits
.L_text_b:
.L_LC1:
        .previous

.section        .debug_sfnames
.L_sfnames_b:
        .byte "/home/andy/powerpc/rtems-3.2.0/c/src/lib/libcpu/ppc/ppc403/flashentry/"
        .byte 0
.L_F0:
        .byte "flashentry.s"
        .byte 0
        .previous

.section        .line
.L_line_b:
        .4byte  .L_line_e-.L_line_b
        .4byte  .L_text_b
.L_LE1:
.L_line_last:
        .4byte  0x0
        .2byte  0xffff
        .4byte  .L_text_e-.L_text_b
.L_line_e:
        .previous

.section        .debug_srcinfo
.L_srcinfo_b:
        .4byte  .L_line_b
        .4byte  .L_sfnames_b
        .4byte  .L_text_b
        .4byte  .L_text_e
        .4byte  0xffffffff
        .4byte  .L_LE1-.L_line_b
        .4byte  .L_F0-.L_sfnames_b
        .4byte  .L_line_last-.L_line_b
        .4byte  0xffffffff
        .previous

.section        .debug_pubnames
        .4byte  .L_debug_b
        .4byte  .L_P0
        .byte "flash_entry"
        .byte 0
        .4byte  0x0
        .byte 0
        .previous

.section        .debug_aranges
        .4byte  .L_debug_b
        .4byte  .L_text_b
        .4byte  .L_text_e-.L_text_b
        .4byte  0
        .4byte  0
        .4byte  0
        .4byte  0
        .4byte  0
        .4byte  0
        .4byte  0x0
        .4byte  0x0
        .previous

.section        .debug
.L_debug_b:
.L_D1:
        .4byte  .L_D1_e-.L_D1
        .2byte  0x11    /* TAG_compile_unit */
        .2byte  0x12    /* AT_sibling */
        .4byte  .L_D2
        .2byte  0x38    /* AT_name */
        .byte "flashentry.s"
        .byte 0
        .2byte  0x258   /* AT_producer */
        .byte "GAS 2.5.2"
        .byte 0
        .2byte  0x111   /* AT_low_pc */
        .4byte  .L_text_b
        .2byte  0x121   /* AT_high_pc */
        .4byte  .L_text_e
        .2byte  0x106   /* AT_stmt_list */
        .4byte  .L_line_b
        .2byte  0x1b8   /* AT_comp_dir */
        .byte "/home/andy/powerpc/rtems-3.2.0/c/src/lib/libcpu/ppc/ppc403/dlentry/"
        .byte 0
        .2byte  0x8006  /* AT_sf_names */
        .4byte  .L_sfnames_b
        .2byte  0x8016  /* AT_src_info */
        .4byte  .L_srcinfo_b
.L_D1_e:
.L_P0:
.L_D3:
        .4byte  .L_D3_e-.L_D3
        .2byte  0x6     /* TAG_global_subroutine */
        .2byte  0x12    /* AT_sibling */
        .4byte  .L_D4
        .2byte  0x38    /* AT_name */
        .byte "flash_entry"
        .byte 0
        .2byte  0x278   /* AT_prototyped */
        .byte 0
        .2byte  0x111   /* AT_low_pc */
        .4byte  .L_text_b
        .2byte  0x121   /* AT_high_pc */
        .4byte  .L_text_e
        .2byte  0x8041  /* AT_body_begin */
        .4byte  .L_text_b
        .2byte  0x8051  /* AT_body_end */
        .4byte  .L_text_e
.L_D3_e:

.L_D4:
        .4byte  .L_D4_e-.L_D4
        .align 2
.L_D4_e:
.L_D2:
        .previous
#endif
                                
/*-------------------------------------------------------------------------------
 * ROM Vector area.
 *------------------------------------------------------------------------------*/
#if PPC_ASM == PPC_ASM_ELF
        .section .entry
#else
        .csect .text[PR]
#endif
        PUBLIC_VAR (flash_entry)
SYM (flash_entry):
        bl      .startup
base_addr:      

/*-------------------------------------------------------------------------------
 * Parameters from linker
 *------------------------------------------------------------------------------*/
toc_pointer:
#if PPC_ASM == PPC_ASM_ELF
        .long   s.got
#else
        .long   TOC[tc0]
#endif
text_length:    
        .long   t.size
text_addr:
        .long   t.start
data_length:    
        .long   copy.size
data_addr:      
        .long   copy.dest
bss_length:     
        .long   bss.size
bss_addr:       
        .long   bss.start

/*-------------------------------------------------------------------------------
 * Reset_entry.
 *------------------------------------------------------------------------------*/
.startup:
        /* Get start address */
        mflr    r1

        /* Assume Bank regs set up..., cache etc. */

        /*-----------------------------------------------------------------------
         * Check the DRAM where STACK+ DATA+ BBS will be placed.  If this is OK
         * we will return here.
         *----------------------------------------------------------------------*/
        bl      rom2ram
        /*-----------------------------------------------------------------------
         * Enable two 128MB cachable regions.
         *----------------------------------------------------------------------*/
        addis   r2,r0,0x8000
        addi    r2,r2,0x0001

        mtspr   0x3fb, r2               /* ICCR */
        mtspr   0x3fa, r2               /* DCCR */

        /*-----------------------------------------------------------------------
         * C_setup.
         *----------------------------------------------------------------------*/
        lwz     r2,toc_pointer-base_addr(r1)       /* set r2 to toc */
        lwz     r1,data_addr-base_addr(r1)         /* set r1 to data_addr */
        addi    r1,r1,-56                /* start stack at data_addr - 56 */
        addi    r3,r0,0x0                /* clear r3 */
        stw     r3, 0(r1)                /* Clear stack chain */
        stw     r3, 4(r1)
        stw     r3, 8(r1)
        stw     r3, 12(r1)
        .extern SYM (boot_card)
        b       SYM (boot_card)          /* call the first C routine */

/*-------------------------------------------------------------------------------
 * Rom2ram.
 *------------------------------------------------------------------------------*/
rom2ram:
        lwz     r2,data_addr-base_addr(r1)        /* start of data set by loader */
        lwz     r3,data_length-base_addr(r1)      /* data length */
        rlwinm  r3,r3,30,0x3FFFFFFF     /* form length/4 */
        mtctr   r3                      /* set ctr reg */
        /*-----------------------------------------------------------------------
         * Calculate offset of data in image.
         *----------------------------------------------------------------------*/
        lwz     r5,text_length-base_addr(r1)      /* get text length */
        lwz     r4,text_addr-base_addr(r1)      /* get text length */
        add     r4,r4,r5                /* r4 = data pointer */
move_data:
        lswi    r6,r4,0x4               /* load r6 */
        stswi   r6,r2,0x4               /* store r6 */
        addi    r4,r4,0x4               /* update r4 */
        addi    r2,r2,0x4               /* update r2 */
        bdnz    move_data               /* decrement counter and loop */
        /*-----------------------------------------------------------------------
         * Data move finished, zero out bss.
         *----------------------------------------------------------------------*/
        lwz     r2,bss_addr-base_addr(r1)         /* start of bss set by loader */
        lwz     r3,bss_length-base_addr(r1)       /* bss length */
        rlwinm. r3,r3,30,0x3FFFFFFF     /* form length/4 */
        beqlr                           /* no bss */
        mtctr   r3                      /* set ctr reg */
        xor     r6,r6,r6                /* r6 = 0 */
clear_bss:
        stswi   r6,r2,0x4               /* store r6 */
        addi    r2,r2,0x4               /* update r2 */
        bdnz    clear_bss               /* decrement counter and loop */
        blr                             /* return */
.L_text_e:

#if PPC_ABI == PPC_ABI_POWEROPEN
        DESCRIPTOR (startup)
#endif