OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [powerpc/] [shared/] [start/] [start.S] - Rev 173

Compare with Previous | Blame | View Log

/*
 *  start.S :     RTEMS entry point
 *
 *  Copyright (C) 1999 Eric Valette. valette@crf.canon.fr
 *
 *  The license and distribution terms for this file may be
 *  found in found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  $Id: start.S,v 1.2 2001-09-27 12:01:07 chris Exp $
 *
 */

#include <libcpu/cpu.h>
#include <libcpu/io.h>
#include <rtems/score/targopts.h>
#include <rtems/score/cpu.h>
#include "asm.h"

#define SYNC \
        sync; \
        isync

#define KERNELBASE      0x0

#define MONITOR_ENTER                   \
        mfmsr   r10             ;       \
        ori     r10,r10,MSR_IP  ;       \
        mtmsr   r10             ;       \
        li      r10,0x63        ;       \
        sc
                        
        .text
        .globl  __rtems_entry_point
        .type   __rtems_entry_point,@function
__rtems_entry_point:
#ifdef DEBUG_EARLY_START
        MONITOR_ENTER
#endif  
                
/* 
 * PREP
 * This is jumped to on prep systems right after the kernel is relocated
 * to its proper place in memory by the boot loader.  The expected layout
 * of the regs is:      
 *   r3: ptr to residual data
 *   r4: initrd_start or if no initrd then 0
 *   r5: initrd_end - unused if r4 is 0
 *   r6: Start of command line string
 *   r7: End of command line string
 *
 *   The Prep boot loader insure that the MMU is currently off...
 *
 */
        
        mr      r31,r3                  /* save parameters */
        mr      r30,r4
        mr      r29,r5
        mr      r28,r6
        mr      r27,r7
        /*
         * Make sure we have nothing in BATS and TLB
         */
        bl      clear_bats
        bl      flush_tlbs
/*
 * Use the first pair of BAT registers to map the 1st 64MB
 * of RAM to KERNELBASE. 
 */
        lis     r11,KERNELBASE@h
        ori     r11,r11,0x7fe           /* set up BAT registers for 604 */
        li      r8,2                    /* R/W access */
        isync
        mtspr   DBAT0L,r8               /* N.B. 6xx (not 601) have valid */
        mtspr   DBAT0U,r11              /* bit in upper BAT register */
        mtspr   IBAT0L,r8
        mtspr   IBAT0U,r11
        isync

/*
 * we now have the 1st 64M of ram mapped with the bats.
 */
        
enter_C_code:
        bl      MMUon
        /*
         * stack = &__rtems_end + 4096
         */
        addis   r9,r0, __rtems_end+(4096-CPU_MINIMUM_STACK_FRAME_SIZE)@ha
        addi    r9,r9, __rtems_end+(4096-CPU_MINIMUM_STACK_FRAME_SIZE)@l
        mr      r1, r9
        bl      zero_bss
        /*
         * restore prep boot params
         */
        mr      r3,r31
        mr      r4,r30
        mr      r5,r29
        mr      r6,r28
        mr      r7,r27 
        bl      save_boot_params
        bl      boot_card
        bl      _return_to_ppcbug
        
        .globl  MMUon
        .type   MMUon,@function
MMUon:  
        mfmsr   r0
#if (PPC_HAS_FPU == 0)
        ori     r0,r0, MSR_IP | MSR_RI | MSR_IR | MSR_DR | MSR_EE | MSR_FE0 | MSR_FE1 | MSR_FP
        xori    r0, r0, MSR_EE | MSR_IP | MSR_FP
#else
        ori     r0,r0, MSR_IP | MSR_RI | MSR_IR | MSR_DR | MSR_EE | MSR_FE0 | MSR_FE1 | MSR_FP
        xori    r0, r0, MSR_EE | MSR_IP | MSR_FE0 | MSR_FE1
#endif
        mflr    r11
        mtsrr0  r11
        mtsrr1  r0
        SYNC
        rfi
        
        .globl  MMUoff
        .type   MMUoff,@function
MMUoff: 
        mfmsr   r0
        ori     r0,r0,MSR_IR| MSR_DR | MSR_IP
        mflr    r11
        xori    r0,r0,MSR_IR|MSR_DR
        mtsrr0  r11
        mtsrr1  r0
        SYNC
        rfi

        .globl  _return_to_ppcbug
        .type   _return_to_ppcbug,@function

        
_return_to_ppcbug:
        mflr    r30
        bl      MMUoff
        MONITOR_ENTER
        bl      MMUon
        mtctr   r30
        bctr    

/* 
 * An undocumented "feature" of 604e requires that the v bit
 * be cleared before changing BAT values.
 *
 * Also, newer IBM firmware does not clear bat3 and 4 so
 * this makes sure it's done.
 *  -- Cort 
 */
clear_bats:
        li      r20,0
        mfspr   r9,PVR
        rlwinm  r9,r9,16,16,31          /* r9 = 1 for 601, 4 for 604 */
        cmpwi   r9, 1
        SYNC
        beq     1f
        mtspr   DBAT0U,r20
        mtspr   DBAT0L,r20      
        mtspr   DBAT1U,r20
        mtspr   DBAT1L,r20
        mtspr   DBAT2U,r20
        mtspr   DBAT2L,r20      
        mtspr   DBAT3U,r20
        mtspr   DBAT3L,r20
1:      
        mtspr   IBAT0U,r20
        mtspr   IBAT0L,r20
        mtspr   IBAT1U,r20
        mtspr   IBAT1L,r20
        mtspr   IBAT2U,r20
        mtspr   IBAT2L,r20
        mtspr   IBAT3U,r20
        mtspr   IBAT3L,r20
        SYNC    
        blr

flush_tlbs:
        lis     r20, 0x1000
1:      addic.  r20, r20, -0x1000
        tlbie   r20
        blt     1b
        sync
        blr
        

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.