URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libcpu/] [i386/] [cpu.h] - Rev 228
Go to most recent revision | Compare with Previous | Blame | View Log
/* * cpu.h - This file contains definitions for data structure related * to Intel system programming. More information can be found * on Intel site and more precisely in the following book : * * Pentium Processor familly * Developper's Manual * * Volume 3 : Architecture and Programming Manual * * Copyright (C) 1998 Eric Valette (valette@crf.canon.fr) * Canon Centre Recherche France. * * The license and distribution terms for this file may be * found in found in the file LICENSE in this distribution or at * http://www.OARcorp.com/rtems/license.html. * * $Id: cpu.h,v 1.2 2001-09-27 12:01:22 chris Exp $ */ #ifndef _LIBCPU_i386_CPU_H #define _LIBCPU_i386_CPU_H #include <libcpu/registers.h> #ifndef ASM /* * Interrupt Level Macros */ #define i386_disable_interrupts( _level ) \ { \ asm volatile ( "pushf ; \ cli ; \ pop %0" \ : "=rm" ((_level)) \ ); \ } #define i386_enable_interrupts( _level ) \ { \ asm volatile ( "push %0 ; \ popf" \ : : "rm" ((_level)) : "cc" \ ); \ } #define i386_flash_interrupts( _level ) \ { \ asm volatile ( "push %0 ; \ popf ; \ cli" \ : : "rm" ((_level)) : "cc" \ ); \ } #define i386_get_interrupt_level( _level ) \ do { \ register unsigned32 _eflags; \ \ asm volatile ( "pushf ; \ pop %0" \ : "=rm" ((_eflags)) \ ); \ \ _level = (_eflags & EFLAGS_INTR_ENABLE) ? 0 : 1; \ } while (0) #define _CPU_ISR_Disable( _level ) i386_disable_interrupts( _level ) #define _CPU_ISR_Enable( _level ) i386_enable_interrupts( _level ) /* * Segment Access Routines * * NOTE: Unfortunately, these are still static inlines even when the * "macro" implementation of the generic code is used. */ static inline unsigned short i386_get_cs() { register unsigned short segment = 0; asm volatile ( "movw %%cs,%0" : "=r" (segment) : "0" (segment) ); return segment; } static inline unsigned short i386_get_ds() { register unsigned short segment = 0; asm volatile ( "movw %%ds,%0" : "=r" (segment) : "0" (segment) ); return segment; } static inline unsigned short i386_get_es() { register unsigned short segment = 0; asm volatile ( "movw %%es,%0" : "=r" (segment) : "0" (segment) ); return segment; } static inline unsigned short i386_get_ss() { register unsigned short segment = 0; asm volatile ( "movw %%ss,%0" : "=r" (segment) : "0" (segment) ); return segment; } static inline unsigned short i386_get_fs() { register unsigned short segment = 0; asm volatile ( "movw %%fs,%0" : "=r" (segment) : "0" (segment) ); return segment; } static inline unsigned short i386_get_gs() { register unsigned short segment = 0; asm volatile ( "movw %%gs,%0" : "=r" (segment) : "0" (segment) ); return segment; } /* * Added for pagination management */ static inline unsigned int i386_get_cr0() { register unsigned int segment = 0; asm volatile ( "movl %%cr0,%0" : "=r" (segment) : "0" (segment) ); return segment; } static inline void i386_set_cr0(unsigned int segment) { asm volatile ( "movl %0,%%cr0" : "=r" (segment) : "0" (segment) ); } static inline unsigned int i386_get_cr2() { register unsigned int segment = 0; asm volatile ( "movl %%cr2,%0" : "=r" (segment) : "0" (segment) ); return segment; } static inline unsigned int i386_get_cr3() { register unsigned int segment = 0; asm volatile ( "movl %%cr3,%0" : "=r" (segment) : "0" (segment) ); return segment; } static inline void i386_set_cr3(unsigned int segment) { asm volatile ( "movl %0,%%cr3" : "=r" (segment) : "0" (segment) ); } /* * IO Port Access Routines */ #define i386_outport_byte( _port, _value ) \ do { register unsigned short __port = _port; \ register unsigned char __value = _value; \ \ asm volatile ( "outb %0,%1" : : "a" (__value), "d" (__port) ); \ } while (0) #define i386_outport_word( _port, _value ) \ do { register unsigned short __port = _port; \ register unsigned short __value = _value; \ \ asm volatile ( "outw %0,%1" : : "a" (__value), "d" (__port) ); \ } while (0) #define i386_outport_long( _port, _value ) \ do { register unsigned short __port = _port; \ register unsigned int __value = _value; \ \ asm volatile ( "outl %0,%1" : : "a" (__value), "d" (__port) ); \ } while (0) #define i386_inport_byte( _port, _value ) \ do { register unsigned short __port = _port; \ register unsigned char __value = 0; \ \ asm volatile ( "inb %1,%0" : "=a" (__value) \ : "d" (__port) \ ); \ _value = __value; \ } while (0) #define i386_inport_word( _port, _value ) \ do { register unsigned short __port = _port; \ register unsigned short __value = 0; \ \ asm volatile ( "inw %1,%0" : "=a" (__value) \ : "d" (__port) \ ); \ _value = __value; \ } while (0) #define i386_inport_long( _port, _value ) \ do { register unsigned short __port = _port; \ register unsigned int __value = 0; \ \ asm volatile ( "inl %1,%0" : "=a" (__value) \ : "d" (__port) \ ); \ _value = __value; \ } while (0) /* * Type definition for raw interrupts. */ typedef unsigned char rtems_vector_offset; struct __rtems_raw_irq_connect_data__; typedef void (*rtems_raw_irq_hdl) (void); typedef void (*rtems_raw_irq_enable) (const struct __rtems_raw_irq_connect_data__*); typedef void (*rtems_raw_irq_disable) (const struct __rtems_raw_irq_connect_data__*); typedef int (*rtems_raw_irq_is_enabled) (const struct __rtems_raw_irq_connect_data__*); typedef struct __rtems_raw_irq_connect_data__{ /* * IDT vector offset (IRQ line + PC386_IRQ_VECTOR_BASE) */ rtems_vector_offset idtIndex; /* * IDT raw handler. See comment on handler properties below in function prototype. */ rtems_raw_irq_hdl hdl; /* * function for enabling raw interrupts. In order to be consistent * with the fact that the raw connexion can defined in the * libcpu library, this library should have no knowledge of * board specific hardware to manage interrupts and thus the * "on" routine must enable the irq both at device and PIC level. * */ rtems_raw_irq_enable on; /* * function for disabling raw interrupts. In order to be consistent * with the fact that the raw connexion can defined in the * libcpu library, this library should have no knowledge of * board specific hardware to manage interrupts and thus the * "on" routine must disable the irq both at device and PIC level. * */ rtems_raw_irq_disable off; /* * function enabling to know what interrupt may currently occur */ rtems_raw_irq_is_enabled isOn; }rtems_raw_irq_connect_data; typedef struct { /* * size of all the table fields (*Tbl) described below. */ unsigned int idtSize; /* * Default handler used when disconnecting interrupts. */ rtems_raw_irq_connect_data defaultRawEntry; /* * Table containing initials/current value. */ rtems_raw_irq_connect_data* rawIrqHdlTbl; }rtems_raw_irq_global_settings; /* * See page 14.9 Figure 14-2. * */ typedef struct { unsigned int low_offsets_bits : 16; unsigned int segment_selector : 16; unsigned int fixed_value_bits : 8; unsigned int gate_type : 5; unsigned int privilege : 2; unsigned int present : 1; unsigned int high_offsets_bits: 16; }interrupt_gate_descriptor; /* * C callable function enabling to create a interrupt_gate_descriptor */ void create_interrupt_gate_descriptor (interrupt_gate_descriptor*, rtems_raw_irq_hdl); /* * C callable function enabling to get handler currently connected to a vector * */ rtems_raw_irq_hdl get_hdl_from_vector(rtems_vector_offset); /* * C callable function enabling to get easilly usable info from * the actual value of IDT register. */ extern void i386_get_info_from_IDTR (interrupt_gate_descriptor** table, unsigned* limit); /* * C callable function enabling to change the value of IDT register. Must be called * with interrupts masked at processor level!!!. */ extern void i386_set_IDTR (interrupt_gate_descriptor* table, unsigned limit); /* * C callable function enabling to set up one raw idt entry */ extern int i386_set_idt_entry (const rtems_raw_irq_connect_data*); /* * C callable function enabling to get one current raw idt entry */ extern int i386_get_current_idt_entry (rtems_raw_irq_connect_data*); /* * C callable function enabling to remove one current raw idt entry */ extern int i386_delete_idt_entry (const rtems_raw_irq_connect_data*); /* * C callable function enabling to init idt. * * CAUTION : this function assumes that the IDTR register * has been already set. */ extern int i386_init_idt (rtems_raw_irq_global_settings* config); /* * C callable function enabling to get actual idt configuration */ extern int i386_get_idt_config (rtems_raw_irq_global_settings** config); /* * See page 11.12 Figure 11-8. * */ typedef struct { unsigned int limit_15_0 : 16; unsigned int base_address_15_0 : 16; unsigned int base_address_23_16 : 8; unsigned int type : 4; unsigned int descriptor_type : 1; unsigned int privilege : 2; unsigned int present : 1; unsigned int limit_19_16 : 4; unsigned int available : 1; unsigned int fixed_value_bits : 1; unsigned int operation_size : 1; unsigned int granularity : 1; unsigned int base_address_31_24 : 8; }segment_descriptors; /* * C callable function enabling to get easilly usable info from * the actual value of GDT register. */ extern void i386_get_info_from_GDTR (segment_descriptors** table, unsigned* limit); /* * C callable function enabling to change the value of GDT register. Must be called * with interrupts masked at processor level!!!. */ extern void i386_set_GDTR (segment_descriptors*, unsigned limit); /* * C callable function enabling to set up one raw interrupt handler */ extern int i386_set_gdt_entry (unsigned short segment_selector, unsigned base, unsigned limit); /* * See page 11.18 Figure 11-12. * */ typedef struct { unsigned int offset : 12; unsigned int page : 10; unsigned int directory : 10; }la_bits; typedef union { la_bits bits; unsigned int address; }linear_address; /* * See page 11.20 Figure 11-14. * */ typedef struct { unsigned int present : 1; unsigned int writable : 1; unsigned int user : 1; unsigned int write_through : 1; unsigned int cache_disable : 1; unsigned int accessed : 1; unsigned int reserved1 : 1; unsigned int page_size : 1; unsigned int reserved2 : 1; unsigned int available : 3; unsigned int page_frame_address : 20; }page_dir_bits; typedef union { page_dir_bits bits; unsigned int dir_entry; }page_dir_entry; typedef struct { unsigned int present : 1; unsigned int writable : 1; unsigned int user : 1; unsigned int write_through : 1; unsigned int cache_disable : 1; unsigned int accessed : 1; unsigned int dirty : 1; unsigned int reserved2 : 2; unsigned int available : 3; unsigned int page_frame_address : 20; }page_table_bits; typedef union { page_table_bits bits; unsigned int table_entry; } page_table_entry; /* * definitions related to page table entry */ #define PG_SIZE 0x1000 #define MASK_OFFSET 0xFFF #define MAX_ENTRY (PG_SIZE/sizeof(page_dir_entry)) #define FOUR_MB 0x400000 #define MASK_FLAGS 0x1A #define PTE_PRESENT 0x01 #define PTE_WRITABLE 0x02 #define PTE_USER 0x04 #define PTE_WRITE_THROUGH 0x08 #define PTE_CACHE_DISABLE 0x10 typedef struct { page_dir_entry pageDirEntry[MAX_ENTRY]; } page_directory; typedef struct { page_table_entry pageTableEntry[MAX_ENTRY]; } page_table; static inline void flush_cache() { /* Would this be better as a macro? */ asm ("wbinvd"); /* gcc did not like a volatile being on this */ } /* C declaration for paging management */ extern int _CPU_is_cache_enabled(); extern int _CPU_is_paging_enabled(); extern int init_paging(); extern void _CPU_enable_paging(); extern void _CPU_disable_paging(); extern void _CPU_disable_cache(); extern void _CPU_enable_cache(); extern int _CPU_map_phys_address (void **mappedAddress, void *physAddress, int size, int flag); extern int _CPU_unmap_virt_address (void *mappedAddress, int size); extern int _CPU_change_memory_mapping_attribute (void **newAddress, void *mappedAddress, unsigned int size, unsigned int flag); extern int _CPU_display_memory_attribute(); # endif /* ASM */ #endif
Go to most recent revision | Compare with Previous | Blame | View Log