OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libcpu/] [m68k/] [m68040/] [fpsp/] [kernel_ex.S] - Rev 751

Go to most recent revision | Compare with Previous | Blame | View Log

//
//      $Id: kernel_ex.S,v 1.2 2001-09-27 12:01:22 chris Exp $
//
//      kernel_ex.sa 3.3 12/19/90 
//
// This file contains routines to force exception status in the 
// fpu for exceptional cases detected or reported within the
// transcendental functions.  Typically, the t_xx routine will
// set the appropriate bits in the USER_FPSR word on the stack.
// The bits are tested in gen_except.sa to determine if an exceptional
// situation needs to be created on return from the FPSP. 
//

//              Copyright (C) Motorola, Inc. 1990
//                      All Rights Reserved
//
//      THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA 
//      The copyright notice above does not evidence any  
//      actual or intended publication of such source code.

KERNEL_EX:    //idnt    2,1 | Motorola 040 Floating Point Software Package

        |section    8

#include "fpsp.defs"

mns_inf:  .long 0xffff0000,0x00000000,0x00000000
pls_inf:  .long 0x7fff0000,0x00000000,0x00000000
nan:      .long 0x7fff0000,0xffffffff,0xffffffff
huge:     .long 0x7ffe0000,0xffffffff,0xffffffff

        |xref     ovf_r_k
        |xref     unf_sub
        |xref     nrm_set

        .global           t_dz
        .global      t_dz2
        .global      t_operr
        .global      t_unfl
        .global      t_ovfl
        .global      t_ovfl2
        .global      t_inx2
        .global   t_frcinx
        .global   t_extdnrm
        .global   t_resdnrm
        .global   dst_nan
        .global   src_nan
//
//      DZ exception
//
//
//      if dz trap disabled
//              store properly signed inf (use sign of etemp) into fp0
//              set FPSR exception status dz bit, condition code 
//              inf bit, and accrued dz bit
//              return
//              frestore the frame into the machine (done by unimp_hd)
//
//      else dz trap enabled
//              set exception status bit & accrued bits in FPSR
//              set flag to disable sto_res from corrupting fp register
//              return
//              frestore the frame into the machine (done by unimp_hd)
//
// t_dz2 is used by monadic functions such as flogn (from do_func).
// t_dz is used by monadic functions such as satanh (from the 
// transcendental function).
//
t_dz2:
        bsetb   #neg_bit,FPSR_CC(%a6)   //set neg bit in FPSR
        fmovel  #0,%FPSR                        //clr status bits (Z set)
        btstb   #dz_bit,FPCR_ENABLE(%a6)        //test FPCR for dz exc enabled
        bnes    dz_ena_end
        bras    m_inf                   //flogx always returns -inf
t_dz:
        fmovel  #0,%FPSR                        //clr status bits (Z set)
        btstb   #dz_bit,FPCR_ENABLE(%a6)        //test FPCR for dz exc enabled
        bnes    dz_ena
//
//      dz disabled
//
        btstb   #sign_bit,ETEMP_EX(%a6) //check sign for neg or pos
        beqs    p_inf                   //branch if pos sign

m_inf:
        fmovemx mns_inf,%fp0-%fp0               //load -inf
        bsetb   #neg_bit,FPSR_CC(%a6)   //set neg bit in FPSR
        bras    set_fpsr
p_inf:
        fmovemx pls_inf,%fp0-%fp0               //load +inf
set_fpsr:
        orl     #dzinf_mask,USER_FPSR(%a6) //set I,DZ,ADZ
        rts
//
//      dz enabled
//
dz_ena:
        btstb   #sign_bit,ETEMP_EX(%a6) //check sign for neg or pos
        beqs    dz_ena_end
        bsetb   #neg_bit,FPSR_CC(%a6)   //set neg bit in FPSR
dz_ena_end:
        orl     #dzinf_mask,USER_FPSR(%a6) //set I,DZ,ADZ
        st      STORE_FLG(%a6)
        rts
//
//      OPERR exception
//
//      if (operr trap disabled)
//              set FPSR exception status operr bit, condition code 
//              nan bit; Store default NAN into fp0
//              frestore the frame into the machine (done by unimp_hd)
//      
//      else (operr trap enabled)
//              set FPSR exception status operr bit, accrued operr bit
//              set flag to disable sto_res from corrupting fp register
//              frestore the frame into the machine (done by unimp_hd)
//
t_operr:
        orl     #opnan_mask,USER_FPSR(%a6) //set NaN, OPERR, AIOP

        btstb   #operr_bit,FPCR_ENABLE(%a6) //test FPCR for operr enabled
        bnes    op_ena

        fmovemx nan,%fp0-%fp0           //load default nan
        rts
op_ena:
        st      STORE_FLG(%a6)          //do not corrupt destination
        rts

//
//      t_unfl --- UNFL exception
//
// This entry point is used by all routines requiring unfl, inex2,
// aunfl, and ainex to be set on exit.
//
// On entry, a0 points to the exceptional operand.  The final exceptional
// operand is built in FP_SCR1 and only the sign from the original operand
// is used.
//
t_unfl:
        clrl    FP_SCR1(%a6)            //set exceptional operand to zero
        clrl    FP_SCR1+4(%a6)
        clrl    FP_SCR1+8(%a6)
        tstb    (%a0)                   //extract sign from caller's exop
        bpls    unfl_signok
        bset    #sign_bit,FP_SCR1(%a6)
unfl_signok:
        leal    FP_SCR1(%a6),%a0
        orl     #unfinx_mask,USER_FPSR(%a6)
//                                      ;set UNFL, INEX2, AUNFL, AINEX
unfl_con:
        btstb   #unfl_bit,FPCR_ENABLE(%a6)
        beqs    unfl_dis

unfl_ena:
        bfclr   STAG(%a6){#5:#3}                //clear wbtm66,wbtm1,wbtm0
        bsetb   #wbtemp15_bit,WB_BYTE(%a6) //set wbtemp15
        bsetb   #sticky_bit,STICKY(%a6) //set sticky bit

        bclrb   #E1,E_BYTE(%a6)

unfl_dis:
        bfextu  FPCR_MODE(%a6){#0:#2},%d0       //get round precision
        
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)          //convert to internal ext format

        bsr     unf_sub                 //returns IEEE result at a0
//                                      ;and sets FPSR_CC accordingly
        
        bfclr   LOCAL_SGN(%a0){#0:#8}   //convert back to IEEE ext format
        beqs    unfl_fin

        bsetb   #sign_bit,LOCAL_EX(%a0)
        bsetb   #sign_bit,FP_SCR1(%a6)  //set sign bit of exc operand

unfl_fin:
        fmovemx (%a0),%fp0-%fp0         //store result in fp0
        rts
        

//
//      t_ovfl2 --- OVFL exception (without inex2 returned)
//
// This entry is used by scale to force catastrophic overflow.  The
// ovfl, aovfl, and ainex bits are set, but not the inex2 bit.
//
t_ovfl2:
        orl     #ovfl_inx_mask,USER_FPSR(%a6)
        movel   ETEMP(%a6),FP_SCR1(%a6)
        movel   ETEMP_HI(%a6),FP_SCR1+4(%a6)
        movel   ETEMP_LO(%a6),FP_SCR1+8(%a6)
//
// Check for single or double round precision.  If single, check if
// the lower 40 bits of ETEMP are zero; if not, set inex2.  If double,
// check if the lower 21 bits are zero; if not, set inex2.
//
        moveb   FPCR_MODE(%a6),%d0
        andib   #0xc0,%d0
        beq     t_work          //if extended, finish ovfl processing
        cmpib   #0x40,%d0               //test for single
        bnes    t_dbl
t_sgl:
        tstb    ETEMP_LO(%a6)
        bnes    t_setinx2
        movel   ETEMP_HI(%a6),%d0
        andil   #0xff,%d0               //look at only lower 8 bits
        bnes    t_setinx2
        bra     t_work
t_dbl:
        movel   ETEMP_LO(%a6),%d0
        andil   #0x7ff,%d0      //look at only lower 11 bits
        beq     t_work
t_setinx2:
        orl     #inex2_mask,USER_FPSR(%a6)
        bras    t_work
//
//      t_ovfl --- OVFL exception
//
//** Note: the exc operand is returned in ETEMP.
//
t_ovfl:
        orl     #ovfinx_mask,USER_FPSR(%a6)
t_work:
        btstb   #ovfl_bit,FPCR_ENABLE(%a6) //test FPCR for ovfl enabled
        beqs    ovf_dis

ovf_ena:
        clrl    FP_SCR1(%a6)            //set exceptional operand
        clrl    FP_SCR1+4(%a6)
        clrl    FP_SCR1+8(%a6)

        bfclr   STAG(%a6){#5:#3}                //clear wbtm66,wbtm1,wbtm0
        bclrb   #wbtemp15_bit,WB_BYTE(%a6) //clear wbtemp15
        bsetb   #sticky_bit,STICKY(%a6) //set sticky bit

        bclrb   #E1,E_BYTE(%a6)
//                                      ;fall through to disabled case

// For disabled overflow call 'ovf_r_k'.  This routine loads the
// correct result based on the rounding precision, destination
// format, rounding mode and sign.
//
ovf_dis:
        bsr     ovf_r_k                 //returns unsigned ETEMP_EX
//                                      ;and sets FPSR_CC accordingly.
        bfclr   ETEMP_SGN(%a6){#0:#8}   //fix sign
        beqs    ovf_pos
        bsetb   #sign_bit,ETEMP_EX(%a6)
        bsetb   #sign_bit,FP_SCR1(%a6)  //set exceptional operand sign
ovf_pos:
        fmovemx ETEMP(%a6),%fp0-%fp0            //move the result to fp0
        rts


//
//      INEX2 exception
//
// The inex2 and ainex bits are set.
//
t_inx2:
        orl     #inx2a_mask,USER_FPSR(%a6) //set INEX2, AINEX
        rts

//
//      Force Inex2
//
// This routine is called by the transcendental routines to force
// the inex2 exception bits set in the FPSR.  If the underflow bit
// is set, but the underflow trap was not taken, the aunfl bit in
// the FPSR must be set.
//
t_frcinx:
        orl     #inx2a_mask,USER_FPSR(%a6) //set INEX2, AINEX
        btstb   #unfl_bit,FPSR_EXCEPT(%a6) //test for unfl bit set
        beqs    no_uacc1                //if clear, do not set aunfl
        bsetb   #aunfl_bit,FPSR_AEXCEPT(%a6)
no_uacc1:
        rts

//
//      DST_NAN
//
// Determine if the destination nan is signalling or non-signalling,
// and set the FPSR bits accordingly.  See the MC68040 User's Manual 
// section 3.2.2.5 NOT-A-NUMBERS.
//
dst_nan:
        btstb   #sign_bit,FPTEMP_EX(%a6) //test sign of nan
        beqs    dst_pos                 //if clr, it was positive
        bsetb   #neg_bit,FPSR_CC(%a6)   //set N bit
dst_pos:
        btstb   #signan_bit,FPTEMP_HI(%a6) //check if signalling 
        beqs    dst_snan                //branch if signalling

        fmovel  %d1,%fpcr                       //restore user's rmode/prec
        fmovex FPTEMP(%a6),%fp0         //return the non-signalling nan
//
// Check the source nan.  If it is signalling, snan will be reported.
//
        moveb   STAG(%a6),%d0
        andib   #0xe0,%d0
        cmpib   #0x60,%d0
        bnes    no_snan
        btstb   #signan_bit,ETEMP_HI(%a6) //check if signalling 
        bnes    no_snan
        orl     #snaniop_mask,USER_FPSR(%a6) //set NAN, SNAN, AIOP
no_snan:
        rts     

dst_snan:
        btstb   #snan_bit,FPCR_ENABLE(%a6) //check if trap enabled 
        beqs    dst_dis                 //branch if disabled

        orb     #nan_tag,DTAG(%a6)      //set up dtag for nan
        st      STORE_FLG(%a6)          //do not store a result
        orl     #snaniop_mask,USER_FPSR(%a6) //set NAN, SNAN, AIOP
        rts

dst_dis:
        bsetb   #signan_bit,FPTEMP_HI(%a6) //set SNAN bit in sop 
        fmovel  %d1,%fpcr                       //restore user's rmode/prec
        fmovex FPTEMP(%a6),%fp0         //load non-sign. nan 
        orl     #snaniop_mask,USER_FPSR(%a6) //set NAN, SNAN, AIOP
        rts

//
//      SRC_NAN
//
// Determine if the source nan is signalling or non-signalling,
// and set the FPSR bits accordingly.  See the MC68040 User's Manual 
// section 3.2.2.5 NOT-A-NUMBERS.
//
src_nan:
        btstb   #sign_bit,ETEMP_EX(%a6) //test sign of nan
        beqs    src_pos                 //if clr, it was positive
        bsetb   #neg_bit,FPSR_CC(%a6)   //set N bit
src_pos:
        btstb   #signan_bit,ETEMP_HI(%a6) //check if signalling 
        beqs    src_snan                //branch if signalling
        fmovel  %d1,%fpcr                       //restore user's rmode/prec
        fmovex ETEMP(%a6),%fp0          //return the non-signalling nan
        rts     

src_snan:
        btstb   #snan_bit,FPCR_ENABLE(%a6) //check if trap enabled 
        beqs    src_dis                 //branch if disabled
        bsetb   #signan_bit,ETEMP_HI(%a6) //set SNAN bit in sop 
        orb     #norm_tag,DTAG(%a6)     //set up dtag for norm
        orb     #nan_tag,STAG(%a6)      //set up stag for nan
        st      STORE_FLG(%a6)          //do not store a result
        orl     #snaniop_mask,USER_FPSR(%a6) //set NAN, SNAN, AIOP
        rts

src_dis:
        bsetb   #signan_bit,ETEMP_HI(%a6) //set SNAN bit in sop 
        fmovel  %d1,%fpcr                       //restore user's rmode/prec
        fmovex ETEMP(%a6),%fp0          //load non-sign. nan 
        orl     #snaniop_mask,USER_FPSR(%a6) //set NAN, SNAN, AIOP
        rts

//
// For all functions that have a denormalized input and that f(x)=x,
// this is the entry point
//
t_extdnrm:
        orl     #unfinx_mask,USER_FPSR(%a6)
//                                      ;set UNFL, INEX2, AUNFL, AINEX
        bras    xdnrm_con
//
// Entry point for scale with extended denorm.  The function does
// not set inex2, aunfl, or ainex.  
//
t_resdnrm:
        orl     #unfl_mask,USER_FPSR(%a6)

xdnrm_con:
        btstb   #unfl_bit,FPCR_ENABLE(%a6)
        beqs    xdnrm_dis

//
// If exceptions are enabled, the additional task of setting up WBTEMP
// is needed so that when the underflow exception handler is entered,
// the user perceives no difference between what the 040 provides vs.
// what the FPSP provides.
//
xdnrm_ena:
        movel   %a0,-(%a7)

        movel   LOCAL_EX(%a0),FP_SCR1(%a6)
        movel   LOCAL_HI(%a0),FP_SCR1+4(%a6)
        movel   LOCAL_LO(%a0),FP_SCR1+8(%a6)

        lea     FP_SCR1(%a6),%a0

        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)          //convert to internal ext format
        tstw    LOCAL_EX(%a0)           //check if input is denorm
        beqs    xdnrm_dn                //if so, skip nrm_set
        bsr     nrm_set                 //normalize the result (exponent
//                                      ;will be negative
xdnrm_dn:
        bclrb   #sign_bit,LOCAL_EX(%a0) //take off false sign
        bfclr   LOCAL_SGN(%a0){#0:#8}   //change back to IEEE ext format
        beqs    xdep
        bsetb   #sign_bit,LOCAL_EX(%a0)
xdep:   
        bfclr   STAG(%a6){#5:#3}                //clear wbtm66,wbtm1,wbtm0
        bsetb   #wbtemp15_bit,WB_BYTE(%a6) //set wbtemp15
        bclrb   #sticky_bit,STICKY(%a6) //clear sticky bit
        bclrb   #E1,E_BYTE(%a6)
        movel   (%a7)+,%a0
xdnrm_dis:
        bfextu  FPCR_MODE(%a6){#0:#2},%d0       //get round precision
        bnes    not_ext                 //if not round extended, store
//                                      ;IEEE defaults
is_ext:
        btstb   #sign_bit,LOCAL_EX(%a0)
        beqs    xdnrm_store

        bsetb   #neg_bit,FPSR_CC(%a6)   //set N bit in FPSR_CC

        bras    xdnrm_store

not_ext:
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)          //convert to internal ext format
        bsr     unf_sub                 //returns IEEE result pointed by
//                                      ;a0; sets FPSR_CC accordingly
        bfclr   LOCAL_SGN(%a0){#0:#8}   //convert back to IEEE ext format
        beqs    xdnrm_store
        bsetb   #sign_bit,LOCAL_EX(%a0)
xdnrm_store:
        fmovemx (%a0),%fp0-%fp0         //store result in fp0
        rts

//
// This subroutine is used for dyadic operations that use an extended
// denorm within the kernel. The approach used is to capture the frame,
// fix/restore.
//
        .global t_avoid_unsupp
t_avoid_unsupp:
        link    %a2,#-LOCAL_SIZE                //so that a2 fpsp.h negative 
//                                      ;offsets may be used
        fsave   -(%a7)
        tstb    1(%a7)                  //check if idle, exit if so
        beq     idle_end
        btstb   #E1,E_BYTE(%a2)         //check for an E1 exception if
//                                      ;enabled, there is an unsupp
        beq     end_avun                //else, exit
        btstb   #7,DTAG(%a2)            //check for denorm destination
        beqs    src_den                 //else, must be a source denorm
//
// handle destination denorm
//
        lea     FPTEMP(%a2),%a0
        btstb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)          //convert to internal ext format
        bclrb   #7,DTAG(%a2)            //set DTAG to norm
        bsr     nrm_set                 //normalize result, exponent
//                                      ;will become negative
        bclrb   #sign_bit,LOCAL_EX(%a0) //get rid of fake sign
        bfclr   LOCAL_SGN(%a0){#0:#8}   //convert back to IEEE ext format
        beqs    ck_src_den              //check if source is also denorm
        bsetb   #sign_bit,LOCAL_EX(%a0)
ck_src_den:
        btstb   #7,STAG(%a2)
        beqs    end_avun
src_den:
        lea     ETEMP(%a2),%a0
        btstb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)          //convert to internal ext format
        bclrb   #7,STAG(%a2)            //set STAG to norm
        bsr     nrm_set                 //normalize result, exponent
//                                      ;will become negative
        bclrb   #sign_bit,LOCAL_EX(%a0) //get rid of fake sign
        bfclr   LOCAL_SGN(%a0){#0:#8}   //convert back to IEEE ext format
        beqs    den_com
        bsetb   #sign_bit,LOCAL_EX(%a0)
den_com:
        moveb   #0xfe,CU_SAVEPC(%a2)    //set continue frame
        clrw    NMNEXC(%a2)             //clear NMNEXC
        bclrb   #E1,E_BYTE(%a2)
//      fmove.l %FPSR,FPSR_SHADOW(%a2)
//      bset.b  #SFLAG,E_BYTE(%a2)
//      bset.b  #XFLAG,T_BYTE(%a2)
end_avun:
        frestore (%a7)+
        unlk    %a2
        rts
idle_end:
        addl    #4,%a7
        unlk    %a2
        rts
        |end

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.