Subversion Repositories openrisc_me

//
//      $Id: res_func.S,v 1.2 2001-09-27 12:01:22 chris Exp $
//
//      res_func.sa 3.9 7/29/91
//
// Normalizes denormalized numbers if necessary and updates the
// stack frame.  The function is then restored back into the
// machine and the 040 completes the operation.  This routine
// is only used by the unsupported data type/format handler.
// (Exception vector 55).
//
// For packed move out (fmove.p fpm,<ea>) the operation is
// completed here; data is packed and moved to user memory. 
// The stack is restored to the 040 only in the case of a
// reportable exception in the conversion.
//
//
//              Copyright (C) Motorola, Inc. 1990
//                      All Rights Reserved
//
//      THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA 
//      The copyright notice above does not evidence any  
//      actual or intended publication of such source code.

RES_FUNC:    //idnt    2,1 | Motorola 040 Floating Point Software Package

        |section        8

#include "fpsp.defs"

sp_bnds:        .short  0x3f81,0x407e
                .short  0x3f6a,0x0000
dp_bnds:        .short  0x3c01,0x43fe
                .short  0x3bcd,0x0000

        |xref   mem_write
        |xref   bindec
        |xref   get_fline
        |xref   round
        |xref   denorm
        |xref   dest_ext
        |xref   dest_dbl
        |xref   dest_sgl
        |xref   unf_sub
        |xref   nrm_set
        |xref   dnrm_lp
        |xref   ovf_res
        |xref   reg_dest
        |xref   t_ovfl
        |xref   t_unfl

        .global res_func
        .global         p_move

res_func:
        clrb    DNRM_FLG(%a6)
        clrb    RES_FLG(%a6)
        clrb    CU_ONLY(%a6)
        tstb    DY_MO_FLG(%a6)
        beqs    monadic
dyadic:
        btstb   #7,DTAG(%a6)    //if dop = norm=000, zero=001,
//                              ;inf=010 or nan=011
        beqs    monadic         //then branch
//                              ;else denorm
// HANDLE DESTINATION DENORM HERE
//                              ;set dtag to norm
//                              ;write the tag & fpte15 to the fstack
        leal    FPTEMP(%a6),%a0

        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)

        bsr     nrm_set         //normalize number (exp will go negative)
        bclrb   #sign_bit,LOCAL_EX(%a0) //get rid of false sign
        bfclr   LOCAL_SGN(%a0){#0:#8}   //change back to IEEE ext format
        beqs    dpos
        bsetb   #sign_bit,LOCAL_EX(%a0)
dpos:
        bfclr   DTAG(%a6){#0:#4}        //set tag to normalized, FPTE15 = 0
        bsetb   #4,DTAG(%a6)    //set FPTE15
        orb     #0x0f,DNRM_FLG(%a6)
monadic:
        leal    ETEMP(%a6),%a0
        btstb   #direction_bit,CMDREG1B(%a6)    //check direction
        bne     opclass3                        //it is a mv out
//
// At this point, only opclass 0 and 2 possible
//
        btstb   #7,STAG(%a6)    //if sop = norm=000, zero=001,
//                              ;inf=010 or nan=011
        bne     mon_dnrm        //else denorm
        tstb    DY_MO_FLG(%a6)  //all cases of dyadic instructions would
        bne     normal          //require normalization of denorm

// At this point:
//      monadic instructions:   fabs  = $18  fneg   = $1a  ftst   = $3a
//                              fmove = $00  fsmove = $40  fdmove = $44
//                              fsqrt = $05* fssqrt = $41  fdsqrt = $45
//                              (*fsqrt reencoded to $05)
//
        movew   CMDREG1B(%a6),%d0       //get command register
        andil   #0x7f,%d0                       //strip to only command word
//
// At this point, fabs, fneg, fsmove, fdmove, ftst, fsqrt, fssqrt, and 
// fdsqrt are possible.
// For cases fabs, fneg, fsmove, and fdmove goto spos (do not normalize)
// For cases fsqrt, fssqrt, and fdsqrt goto nrm_src (do normalize)
//
        btstl   #0,%d0
        bne     normal                  //weed out fsqrt instructions
//
// cu_norm handles fmove in instructions with normalized inputs.
// The routine round is used to correctly round the input for the
// destination precision and mode.
//
cu_norm:
        st      CU_ONLY(%a6)            //set cu-only inst flag
        movew   CMDREG1B(%a6),%d0
        andib   #0x3b,%d0               //isolate bits to select inst
        tstb    %d0
        beql    cu_nmove        //if zero, it is an fmove
        cmpib   #0x18,%d0
        beql    cu_nabs         //if $18, it is fabs
        cmpib   #0x1a,%d0
        beql    cu_nneg         //if $1a, it is fneg
//
// Inst is ftst.  Check the source operand and set the cc's accordingly.
// No write is done, so simply rts.
//
cu_ntst:
        movew   LOCAL_EX(%a0),%d0
        bclrl   #15,%d0
        sne     LOCAL_SGN(%a0)
        beqs    cu_ntpo
        orl     #neg_mask,USER_FPSR(%a6) //set N
cu_ntpo:
        cmpiw   #0x7fff,%d0     //test for inf/nan
        bnes    cu_ntcz
        tstl    LOCAL_HI(%a0)
        bnes    cu_ntn
        tstl    LOCAL_LO(%a0)
        bnes    cu_ntn
        orl     #inf_mask,USER_FPSR(%a6)
        rts
cu_ntn:
        orl     #nan_mask,USER_FPSR(%a6)
        movel   ETEMP_EX(%a6),FPTEMP_EX(%a6)    //set up fptemp sign for 
//                                              ;snan handler

        rts
cu_ntcz:
        tstl    LOCAL_HI(%a0)
        bnel    cu_ntsx
        tstl    LOCAL_LO(%a0)
        bnel    cu_ntsx
        orl     #z_mask,USER_FPSR(%a6)
cu_ntsx:
        rts
//
// Inst is fabs.  Execute the absolute value function on the input.
// Branch to the fmove code.  If the operand is NaN, do nothing.
//
cu_nabs:
        moveb   STAG(%a6),%d0
        btstl   #5,%d0                  //test for NaN or zero
        bne     wr_etemp                //if either, simply write it
        bclrb   #7,LOCAL_EX(%a0)                //do abs
        bras    cu_nmove                //fmove code will finish
//
// Inst is fneg.  Execute the negate value function on the input.
// Fall though to the fmove code.  If the operand is NaN, do nothing.
//
cu_nneg:
        moveb   STAG(%a6),%d0
        btstl   #5,%d0                  //test for NaN or zero
        bne     wr_etemp                //if either, simply write it
        bchgb   #7,LOCAL_EX(%a0)                //do neg
//
// Inst is fmove.  This code also handles all result writes.
// If bit 2 is set, round is forced to double.  If it is clear,
// and bit 6 is set, round is forced to single.  If both are clear,
// the round precision is found in the fpcr.  If the rounding precision
// is double or single, round the result before the write.
//
cu_nmove:
        moveb   STAG(%a6),%d0
        andib   #0xe0,%d0                       //isolate stag bits
        bne     wr_etemp                //if not norm, simply write it
        btstb   #2,CMDREG1B+1(%a6)      //check for rd
        bne     cu_nmrd
        btstb   #6,CMDREG1B+1(%a6)      //check for rs
        bne     cu_nmrs
//
// The move or operation is not with forced precision.  Test for
// nan or inf as the input; if so, simply write it to FPn.  Use the
// FPCR_MODE byte to get rounding on norms and zeros.
//
cu_nmnr:
        bfextu  FPCR_MODE(%a6){#0:#2},%d0
        tstb    %d0                     //check for extended
        beq     cu_wrexn                //if so, just write result
        cmpib   #1,%d0                  //check for single
        beq     cu_nmrs                 //fall through to double
//
// The move is fdmove or round precision is double.
//
cu_nmrd:
        movel   #2,%d0                  //set up the size for denorm
        movew   LOCAL_EX(%a0),%d1               //compare exponent to double threshold
        andw    #0x7fff,%d1     
        cmpw    #0x3c01,%d1
        bls     cu_nunfl
        bfextu  FPCR_MODE(%a6){#2:#2},%d1       //get rmode
        orl     #0x00020000,%d1         //or in rprec (double)
        clrl    %d0                     //clear g,r,s for round
        bclrb   #sign_bit,LOCAL_EX(%a0) //convert to internal format
        sne     LOCAL_SGN(%a0)
        bsrl    round
        bfclr   LOCAL_SGN(%a0){#0:#8}
        beqs    cu_nmrdc
        bsetb   #sign_bit,LOCAL_EX(%a0)
cu_nmrdc:
        movew   LOCAL_EX(%a0),%d1               //check for overflow
        andw    #0x7fff,%d1
        cmpw    #0x43ff,%d1
        bge     cu_novfl                //take care of overflow case
        bra     cu_wrexn
//
// The move is fsmove or round precision is single.
//
cu_nmrs:
        movel   #1,%d0
        movew   LOCAL_EX(%a0),%d1
        andw    #0x7fff,%d1
        cmpw    #0x3f81,%d1
        bls     cu_nunfl
        bfextu  FPCR_MODE(%a6){#2:#2},%d1
        orl     #0x00010000,%d1
        clrl    %d0
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)
        bsrl    round
        bfclr   LOCAL_SGN(%a0){#0:#8}
        beqs    cu_nmrsc
        bsetb   #sign_bit,LOCAL_EX(%a0)
cu_nmrsc:
        movew   LOCAL_EX(%a0),%d1
        andw    #0x7FFF,%d1
        cmpw    #0x407f,%d1
        blt     cu_wrexn
//
// The operand is above precision boundaries.  Use t_ovfl to
// generate the correct value.
//
cu_novfl:
        bsr     t_ovfl
        bra     cu_wrexn
//
// The operand is below precision boundaries.  Use denorm to
// generate the correct value.
//
cu_nunfl:
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)
        bsr     denorm
        bfclr   LOCAL_SGN(%a0){#0:#8}   //change back to IEEE ext format
        beqs    cu_nucont
        bsetb   #sign_bit,LOCAL_EX(%a0)
cu_nucont:
        bfextu  FPCR_MODE(%a6){#2:#2},%d1
        btstb   #2,CMDREG1B+1(%a6)      //check for rd
        bne     inst_d
        btstb   #6,CMDREG1B+1(%a6)      //check for rs
        bne     inst_s
        swap    %d1
        moveb   FPCR_MODE(%a6),%d1
        lsrb    #6,%d1
        swap    %d1
        bra     inst_sd
inst_d:
        orl     #0x00020000,%d1
        bra     inst_sd
inst_s:
        orl     #0x00010000,%d1
inst_sd:
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)
        bsrl    round
        bfclr   LOCAL_SGN(%a0){#0:#8}
        beqs    cu_nuflp
        bsetb   #sign_bit,LOCAL_EX(%a0)
cu_nuflp:
        btstb   #inex2_bit,FPSR_EXCEPT(%a6)
        beqs    cu_nuninx
        orl     #aunfl_mask,USER_FPSR(%a6) //if the round was inex, set AUNFL
cu_nuninx:
        tstl    LOCAL_HI(%a0)           //test for zero
        bnes    cu_nunzro
        tstl    LOCAL_LO(%a0)
        bnes    cu_nunzro
//
// The mantissa is zero from the denorm loop.  Check sign and rmode
// to see if rounding should have occurred which would leave the lsb.
//
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0               //isolate rmode
        cmpil   #0x20,%d0
        blts    cu_nzro
        bnes    cu_nrp
cu_nrm:
        tstw    LOCAL_EX(%a0)   //if positive, set lsb
        bges    cu_nzro
        btstb   #7,FPCR_MODE(%a6) //check for double
        beqs    cu_nincs
        bras    cu_nincd
cu_nrp:
        tstw    LOCAL_EX(%a0)   //if positive, set lsb
        blts    cu_nzro
        btstb   #7,FPCR_MODE(%a6) //check for double
        beqs    cu_nincs
cu_nincd:
        orl     #0x800,LOCAL_LO(%a0) //inc for double
        bra     cu_nunzro
cu_nincs:
        orl     #0x100,LOCAL_HI(%a0) //inc for single
        bra     cu_nunzro
cu_nzro:
        orl     #z_mask,USER_FPSR(%a6)
        moveb   STAG(%a6),%d0
        andib   #0xe0,%d0
        cmpib   #0x40,%d0               //check if input was tagged zero
        beqs    cu_numv
cu_nunzro:
        orl     #unfl_mask,USER_FPSR(%a6) //set unfl
cu_numv:
        movel   (%a0),ETEMP(%a6)
        movel   4(%a0),ETEMP_HI(%a6)
        movel   8(%a0),ETEMP_LO(%a6)
//
// Write the result to memory, setting the fpsr cc bits.  NaN and Inf
// bypass cu_wrexn.
//
cu_wrexn:
        tstw    LOCAL_EX(%a0)           //test for zero
        beqs    cu_wrzero
        cmpw    #0x8000,LOCAL_EX(%a0)   //test for zero
        bnes    cu_wreon
cu_wrzero:
        orl     #z_mask,USER_FPSR(%a6)  //set Z bit
cu_wreon:
        tstw    LOCAL_EX(%a0)
        bpl     wr_etemp
        orl     #neg_mask,USER_FPSR(%a6)
        bra     wr_etemp

//
// HANDLE SOURCE DENORM HERE
//
//                              ;clear denorm stag to norm
//                              ;write the new tag & ete15 to the fstack
mon_dnrm:
//
// At this point, check for the cases in which normalizing the 
// denorm produces incorrect results.
//
        tstb    DY_MO_FLG(%a6)  //all cases of dyadic instructions would
        bnes    nrm_src         //require normalization of denorm

// At this point:
//      monadic instructions:   fabs  = $18  fneg   = $1a  ftst   = $3a
//                              fmove = $00  fsmove = $40  fdmove = $44
//                              fsqrt = $05* fssqrt = $41  fdsqrt = $45
//                              (*fsqrt reencoded to $05)
//
        movew   CMDREG1B(%a6),%d0       //get command register
        andil   #0x7f,%d0                       //strip to only command word
//
// At this point, fabs, fneg, fsmove, fdmove, ftst, fsqrt, fssqrt, and 
// fdsqrt are possible.
// For cases fabs, fneg, fsmove, and fdmove goto spos (do not normalize)
// For cases fsqrt, fssqrt, and fdsqrt goto nrm_src (do normalize)
//
        btstl   #0,%d0
        bnes    nrm_src         //weed out fsqrt instructions
        st      CU_ONLY(%a6)    //set cu-only inst flag
        bra     cu_dnrm         //fmove, fabs, fneg, ftst 
//                              ;cases go to cu_dnrm
nrm_src:
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)
        bsr     nrm_set         //normalize number (exponent will go 
//                              ; negative)
        bclrb   #sign_bit,LOCAL_EX(%a0) //get rid of false sign

        bfclr   LOCAL_SGN(%a0){#0:#8}   //change back to IEEE ext format
        beqs    spos
        bsetb   #sign_bit,LOCAL_EX(%a0)
spos:
        bfclr   STAG(%a6){#0:#4}        //set tag to normalized, FPTE15 = 0
        bsetb   #4,STAG(%a6)    //set ETE15
        orb     #0xf0,DNRM_FLG(%a6)
normal:
        tstb    DNRM_FLG(%a6)   //check if any of the ops were denorms
        bne     ck_wrap         //if so, check if it is a potential
//                              ;wrap-around case
fix_stk:
        moveb   #0xfe,CU_SAVEPC(%a6)
        bclrb   #E1,E_BYTE(%a6)

        clrw    NMNEXC(%a6)

        st      RES_FLG(%a6)    //indicate that a restore is needed
        rts

//
// cu_dnrm handles all cu-only instructions (fmove, fabs, fneg, and
// ftst) completely in software without an frestore to the 040. 
//
cu_dnrm:
        st      CU_ONLY(%a6)
        movew   CMDREG1B(%a6),%d0
        andib   #0x3b,%d0               //isolate bits to select inst
        tstb    %d0
        beql    cu_dmove        //if zero, it is an fmove
        cmpib   #0x18,%d0
        beql    cu_dabs         //if $18, it is fabs
        cmpib   #0x1a,%d0
        beql    cu_dneg         //if $1a, it is fneg
//
// Inst is ftst.  Check the source operand and set the cc's accordingly.
// No write is done, so simply rts.
//
cu_dtst:
        movew   LOCAL_EX(%a0),%d0
        bclrl   #15,%d0
        sne     LOCAL_SGN(%a0)
        beqs    cu_dtpo
        orl     #neg_mask,USER_FPSR(%a6) //set N
cu_dtpo:
        cmpiw   #0x7fff,%d0     //test for inf/nan
        bnes    cu_dtcz
        tstl    LOCAL_HI(%a0)
        bnes    cu_dtn
        tstl    LOCAL_LO(%a0)
        bnes    cu_dtn
        orl     #inf_mask,USER_FPSR(%a6)
        rts
cu_dtn:
        orl     #nan_mask,USER_FPSR(%a6)
        movel   ETEMP_EX(%a6),FPTEMP_EX(%a6)    //set up fptemp sign for 
//                                              ;snan handler
        rts
cu_dtcz:
        tstl    LOCAL_HI(%a0)
        bnel    cu_dtsx
        tstl    LOCAL_LO(%a0)
        bnel    cu_dtsx
        orl     #z_mask,USER_FPSR(%a6)
cu_dtsx:
        rts
//
// Inst is fabs.  Execute the absolute value function on the input.
// Branch to the fmove code.
//
cu_dabs:
        bclrb   #7,LOCAL_EX(%a0)                //do abs
        bras    cu_dmove                //fmove code will finish
//
// Inst is fneg.  Execute the negate value function on the input.
// Fall though to the fmove code.
//
cu_dneg:
        bchgb   #7,LOCAL_EX(%a0)                //do neg
//
// Inst is fmove.  This code also handles all result writes.
// If bit 2 is set, round is forced to double.  If it is clear,
// and bit 6 is set, round is forced to single.  If both are clear,
// the round precision is found in the fpcr.  If the rounding precision
// is double or single, the result is zero, and the mode is checked
// to determine if the lsb of the result should be set.
//
cu_dmove:
        btstb   #2,CMDREG1B+1(%a6)      //check for rd
        bne     cu_dmrd
        btstb   #6,CMDREG1B+1(%a6)      //check for rs
        bne     cu_dmrs
//
// The move or operation is not with forced precision.  Use the
// FPCR_MODE byte to get rounding.
//
cu_dmnr:
        bfextu  FPCR_MODE(%a6){#0:#2},%d0
        tstb    %d0                     //check for extended
        beq     cu_wrexd                //if so, just write result
        cmpib   #1,%d0                  //check for single
        beq     cu_dmrs                 //fall through to double
//
// The move is fdmove or round precision is double.  Result is zero.
// Check rmode for rp or rm and set lsb accordingly.
//
cu_dmrd:
        bfextu  FPCR_MODE(%a6){#2:#2},%d1       //get rmode
        tstw    LOCAL_EX(%a0)           //check sign
        blts    cu_dmdn
        cmpib   #3,%d1                  //check for rp
        bne     cu_dpd                  //load double pos zero
        bra     cu_dpdr                 //load double pos zero w/lsb
cu_dmdn:
        cmpib   #2,%d1                  //check for rm
        bne     cu_dnd                  //load double neg zero
        bra     cu_dndr                 //load double neg zero w/lsb
//
// The move is fsmove or round precision is single.  Result is zero.
// Check for rp or rm and set lsb accordingly.
//
cu_dmrs:
        bfextu  FPCR_MODE(%a6){#2:#2},%d1       //get rmode
        tstw    LOCAL_EX(%a0)           //check sign
        blts    cu_dmsn
        cmpib   #3,%d1                  //check for rp
        bne     cu_spd                  //load single pos zero
        bra     cu_spdr                 //load single pos zero w/lsb
cu_dmsn:
        cmpib   #2,%d1                  //check for rm
        bne     cu_snd                  //load single neg zero
        bra     cu_sndr                 //load single neg zero w/lsb
//
// The precision is extended, so the result in etemp is correct.
// Simply set unfl (not inex2 or aunfl) and write the result to 
// the correct fp register.
cu_wrexd:
        orl     #unfl_mask,USER_FPSR(%a6)
        tstw    LOCAL_EX(%a0)
        beq     wr_etemp
        orl     #neg_mask,USER_FPSR(%a6)
        bra     wr_etemp
//
// These routines write +/- zero in double format.  The routines
// cu_dpdr and cu_dndr set the double lsb.
//
cu_dpd:
        movel   #0x3c010000,LOCAL_EX(%a0)       //force pos double zero
        clrl    LOCAL_HI(%a0)
        clrl    LOCAL_LO(%a0)
        orl     #z_mask,USER_FPSR(%a6)
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
cu_dpdr:
        movel   #0x3c010000,LOCAL_EX(%a0)       //force pos double zero
        clrl    LOCAL_HI(%a0)
        movel   #0x800,LOCAL_LO(%a0)    //with lsb set
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
cu_dnd:
        movel   #0xbc010000,LOCAL_EX(%a0)       //force pos double zero
        clrl    LOCAL_HI(%a0)
        clrl    LOCAL_LO(%a0)
        orl     #z_mask,USER_FPSR(%a6)
        orl     #neg_mask,USER_FPSR(%a6)
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
cu_dndr:
        movel   #0xbc010000,LOCAL_EX(%a0)       //force pos double zero
        clrl    LOCAL_HI(%a0)
        movel   #0x800,LOCAL_LO(%a0)    //with lsb set
        orl     #neg_mask,USER_FPSR(%a6)
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
//
// These routines write +/- zero in single format.  The routines
// cu_dpdr and cu_dndr set the single lsb.
//
cu_spd:
        movel   #0x3f810000,LOCAL_EX(%a0)       //force pos single zero
        clrl    LOCAL_HI(%a0)
        clrl    LOCAL_LO(%a0)
        orl     #z_mask,USER_FPSR(%a6)
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
cu_spdr:
        movel   #0x3f810000,LOCAL_EX(%a0)       //force pos single zero
        movel   #0x100,LOCAL_HI(%a0)    //with lsb set
        clrl    LOCAL_LO(%a0)
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
cu_snd:
        movel   #0xbf810000,LOCAL_EX(%a0)       //force pos single zero
        clrl    LOCAL_HI(%a0)
        clrl    LOCAL_LO(%a0)
        orl     #z_mask,USER_FPSR(%a6)
        orl     #neg_mask,USER_FPSR(%a6)
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
cu_sndr:
        movel   #0xbf810000,LOCAL_EX(%a0)       //force pos single zero
        movel   #0x100,LOCAL_HI(%a0)    //with lsb set
        clrl    LOCAL_LO(%a0)
        orl     #neg_mask,USER_FPSR(%a6)
        orl     #unfinx_mask,USER_FPSR(%a6)
        bra     wr_etemp
        
//
// This code checks for 16-bit overflow conditions on dyadic
// operations which are not restorable into the floating-point
// unit and must be completed in software.  Basically, this
// condition exists with a very large norm and a denorm.  One
// of the operands must be denormalized to enter this code.
//
// Flags used:
//      DY_MO_FLG contains 0 for monadic op, $ff for dyadic
//      DNRM_FLG contains $00 for neither op denormalized
//                        $0f for the destination op denormalized
//                        $f0 for the source op denormalized
//                        $ff for both ops denormalized
//
// The wrap-around condition occurs for add, sub, div, and cmp
// when 
//
//      abs(dest_exp - src_exp) >= $8000
//
// and for mul when
//
//      (dest_exp + src_exp) < $0
//
// we must process the operation here if this case is true.
//
// The rts following the frcfpn routine is the exit from res_func
// for this condition.  The restore flag (RES_FLG) is left clear.
// No frestore is done unless an exception is to be reported.
//
// For fadd: 
//      if(sign_of(dest) != sign_of(src))
//              replace exponent of src with $3fff (keep sign)
//              use fpu to perform dest+new_src (user's rmode and X)
//              clr sticky
//      else
//              set sticky
//      call round with user's precision and mode
//      move result to fpn and wbtemp
//
// For fsub:
//      if(sign_of(dest) == sign_of(src))
//              replace exponent of src with $3fff (keep sign)
//              use fpu to perform dest+new_src (user's rmode and X)
//              clr sticky
//      else
//              set sticky
//      call round with user's precision and mode
//      move result to fpn and wbtemp
//
// For fdiv/fsgldiv:
//      if(both operands are denorm)
//              restore_to_fpu;
//      if(dest is norm)
//              force_ovf;
//      else(dest is denorm)
//              force_unf:
//
// For fcmp:
//      if(dest is norm)
//              N = sign_of(dest);
//      else(dest is denorm)
//              N = sign_of(src);
//
// For fmul:
//      if(both operands are denorm)
//              force_unf;
//      if((dest_exp + src_exp) < 0)
//              force_unf:
//      else
//              restore_to_fpu;
//
// local equates:
        .set    addcode,0x22
        .set    subcode,0x28
        .set    mulcode,0x23
        .set    divcode,0x20
        .set    cmpcode,0x38
ck_wrap:
        | tstb  DY_MO_FLG(%a6)  ;check for fsqrt
        beq     fix_stk         //if zero, it is fsqrt
        movew   CMDREG1B(%a6),%d0
        andiw   #0x3b,%d0               //strip to command bits
        cmpiw   #addcode,%d0
        beq     wrap_add
        cmpiw   #subcode,%d0
        beq     wrap_sub
        cmpiw   #mulcode,%d0
        beq     wrap_mul
        cmpiw   #cmpcode,%d0
        beq     wrap_cmp
//
// Inst is fdiv.  
//
wrap_div:
        cmpb    #0xff,DNRM_FLG(%a6) //if both ops denorm, 
        beq     fix_stk          //restore to fpu
//
// One of the ops is denormalized.  Test for wrap condition
// and force the result.
//
        cmpb    #0x0f,DNRM_FLG(%a6) //check for dest denorm
        bnes    div_srcd
div_destd:
        bsrl    ckinf_ns
        bne     fix_stk
        bfextu  ETEMP_EX(%a6){#1:#15},%d0       //get src exp (always pos)
        bfexts  FPTEMP_EX(%a6){#1:#15},%d1      //get dest exp (always neg)
        subl    %d1,%d0                 //subtract dest from src
        cmpl    #0x7fff,%d0
        blt     fix_stk                 //if less, not wrap case
        clrb    WBTEMP_SGN(%a6)
        movew   ETEMP_EX(%a6),%d0               //find the sign of the result
        movew   FPTEMP_EX(%a6),%d1
        eorw    %d1,%d0
        andiw   #0x8000,%d0
        beq     force_unf
        st      WBTEMP_SGN(%a6)
        bra     force_unf

ckinf_ns:
        moveb   STAG(%a6),%d0           //check source tag for inf or nan
        bra     ck_in_com
ckinf_nd:
        moveb   DTAG(%a6),%d0           //check destination tag for inf or nan
ck_in_com:      
        andib   #0x60,%d0                       //isolate tag bits
        cmpb    #0x40,%d0                       //is it inf?
        beq     nan_or_inf              //not wrap case
        cmpb    #0x60,%d0                       //is it nan?
        beq     nan_or_inf              //yes, not wrap case?
        cmpb    #0x20,%d0                       //is it a zero?
        beq     nan_or_inf              //yes
        clrl    %d0
        rts                             //then ; it is either a zero of norm,
//                                      ;check wrap case
nan_or_inf:
        moveql  #-1,%d0
        rts



div_srcd:
        bsrl    ckinf_nd
        bne     fix_stk
        bfextu  FPTEMP_EX(%a6){#1:#15},%d0      //get dest exp (always pos)
        bfexts  ETEMP_EX(%a6){#1:#15},%d1       //get src exp (always neg)
        subl    %d1,%d0                 //subtract src from dest
        cmpl    #0x8000,%d0
        blt     fix_stk                 //if less, not wrap case
        clrb    WBTEMP_SGN(%a6)
        movew   ETEMP_EX(%a6),%d0               //find the sign of the result
        movew   FPTEMP_EX(%a6),%d1
        eorw    %d1,%d0
        andiw   #0x8000,%d0
        beqs    force_ovf
        st      WBTEMP_SGN(%a6)
//
// This code handles the case of the instruction resulting in 
// an overflow condition.
//
force_ovf:
        bclrb   #E1,E_BYTE(%a6)
        orl     #ovfl_inx_mask,USER_FPSR(%a6)
        clrw    NMNEXC(%a6)
        leal    WBTEMP(%a6),%a0         //point a0 to memory location
        movew   CMDREG1B(%a6),%d0
        btstl   #6,%d0                  //test for forced precision
        beqs    frcovf_fpcr
        btstl   #2,%d0                  //check for double
        bnes    frcovf_dbl
        movel   #0x1,%d0                        //inst is forced single
        bras    frcovf_rnd
frcovf_dbl:
        movel   #0x2,%d0                        //inst is forced double
        bras    frcovf_rnd
frcovf_fpcr:
        bfextu  FPCR_MODE(%a6){#0:#2},%d0       //inst not forced - use fpcr prec
frcovf_rnd:

// The 881/882 does not set inex2 for the following case, so the 
// line is commented out to be compatible with 881/882
//      tst.b   %d0
//      beq.b   frcovf_x
//      or.l    #inex2_mask,USER_FPSR(%a6) ;if prec is s or d, set inex2

//frcovf_x:
        bsrl    ovf_res                 //get correct result based on
//                                      ;round precision/mode.  This 
//                                      ;sets FPSR_CC correctly
//                                      ;returns in external format
        bfclr   WBTEMP_SGN(%a6){#0:#8}
        beq     frcfpn
        bsetb   #sign_bit,WBTEMP_EX(%a6)
        bra     frcfpn
//
// Inst is fadd.
//
wrap_add:
        cmpb    #0xff,DNRM_FLG(%a6) //if both ops denorm, 
        beq     fix_stk          //restore to fpu
//
// One of the ops is denormalized.  Test for wrap condition
// and complete the instruction.
//
        cmpb    #0x0f,DNRM_FLG(%a6) //check for dest denorm
        bnes    add_srcd
add_destd:
        bsrl    ckinf_ns
        bne     fix_stk
        bfextu  ETEMP_EX(%a6){#1:#15},%d0       //get src exp (always pos)
        bfexts  FPTEMP_EX(%a6){#1:#15},%d1      //get dest exp (always neg)
        subl    %d1,%d0                 //subtract dest from src
        cmpl    #0x8000,%d0
        blt     fix_stk                 //if less, not wrap case
        bra     add_wrap
add_srcd:
        bsrl    ckinf_nd
        bne     fix_stk
        bfextu  FPTEMP_EX(%a6){#1:#15},%d0      //get dest exp (always pos)
        bfexts  ETEMP_EX(%a6){#1:#15},%d1       //get src exp (always neg)
        subl    %d1,%d0                 //subtract src from dest
        cmpl    #0x8000,%d0
        blt     fix_stk                 //if less, not wrap case
//
// Check the signs of the operands.  If they are unlike, the fpu
// can be used to add the norm and 1.0 with the sign of the
// denorm and it will correctly generate the result in extended
// precision.  We can then call round with no sticky and the result
// will be correct for the user's rounding mode and precision.  If
// the signs are the same, we call round with the sticky bit set
// and the result will be correct for the user's rounding mode and
// precision.
//
add_wrap:
        movew   ETEMP_EX(%a6),%d0
        movew   FPTEMP_EX(%a6),%d1
        eorw    %d1,%d0
        andiw   #0x8000,%d0
        beq     add_same
//
// The signs are unlike.
//
        cmpb    #0x0f,DNRM_FLG(%a6) //is dest the denorm?
        bnes    add_u_srcd
        movew   FPTEMP_EX(%a6),%d0
        andiw   #0x8000,%d0
        orw     #0x3fff,%d0     //force the exponent to +/- 1
        movew   %d0,FPTEMP_EX(%a6) //in the denorm
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        fmovel  %d0,%fpcr               //set up users rmode and X
        fmovex  ETEMP(%a6),%fp0
        faddx   FPTEMP(%a6),%fp0
        leal    WBTEMP(%a6),%a0 //point a0 to wbtemp in frame
        fmovel  %fpsr,%d1
        orl     %d1,USER_FPSR(%a6) //capture cc's and inex from fadd
        fmovex  %fp0,WBTEMP(%a6)        //write result to memory
        lsrl    #4,%d0          //put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          //put precision in upper word
        swap    %d1
        orl     %d0,%d1         //set up for round call
        clrl    %d0             //force sticky to zero
        bclrb   #sign_bit,WBTEMP_EX(%a6)
        sne     WBTEMP_SGN(%a6)
        bsrl    round           //round result to users rmode & prec
        bfclr   WBTEMP_SGN(%a6){#0:#8}  //convert back to IEEE ext format
        beq     frcfpnr
        bsetb   #sign_bit,WBTEMP_EX(%a6)
        bra     frcfpnr
add_u_srcd:
        movew   ETEMP_EX(%a6),%d0
        andiw   #0x8000,%d0
        orw     #0x3fff,%d0     //force the exponent to +/- 1
        movew   %d0,ETEMP_EX(%a6) //in the denorm
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        fmovel  %d0,%fpcr               //set up users rmode and X
        fmovex  ETEMP(%a6),%fp0
        faddx   FPTEMP(%a6),%fp0
        fmovel  %fpsr,%d1
        orl     %d1,USER_FPSR(%a6) //capture cc's and inex from fadd
        leal    WBTEMP(%a6),%a0 //point a0 to wbtemp in frame
        fmovex  %fp0,WBTEMP(%a6)        //write result to memory
        lsrl    #4,%d0          //put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          //put precision in upper word
        swap    %d1
        orl     %d0,%d1         //set up for round call
        clrl    %d0             //force sticky to zero
        bclrb   #sign_bit,WBTEMP_EX(%a6)
        sne     WBTEMP_SGN(%a6) //use internal format for round
        bsrl    round           //round result to users rmode & prec
        bfclr   WBTEMP_SGN(%a6){#0:#8}  //convert back to IEEE ext format
        beq     frcfpnr
        bsetb   #sign_bit,WBTEMP_EX(%a6)
        bra     frcfpnr
//
// Signs are alike:
//
add_same:
        cmpb    #0x0f,DNRM_FLG(%a6) //is dest the denorm?
        bnes    add_s_srcd
add_s_destd:
        leal    ETEMP(%a6),%a0
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        lsrl    #4,%d0          //put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          //put precision in upper word
        swap    %d1
        orl     %d0,%d1         //set up for round call
        movel   #0x20000000,%d0 //set sticky for round
        bclrb   #sign_bit,ETEMP_EX(%a6)
        sne     ETEMP_SGN(%a6)
        bsrl    round           //round result to users rmode & prec
        bfclr   ETEMP_SGN(%a6){#0:#8}   //convert back to IEEE ext format
        beqs    add_s_dclr
        bsetb   #sign_bit,ETEMP_EX(%a6)
add_s_dclr:
        leal    WBTEMP(%a6),%a0
        movel   ETEMP(%a6),(%a0)        //write result to wbtemp
        movel   ETEMP_HI(%a6),4(%a0)
        movel   ETEMP_LO(%a6),8(%a0)
        tstw    ETEMP_EX(%a6)
        bgt     add_ckovf
        orl     #neg_mask,USER_FPSR(%a6)
        bra     add_ckovf
add_s_srcd:
        leal    FPTEMP(%a6),%a0
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        lsrl    #4,%d0          //put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          //put precision in upper word
        swap    %d1
        orl     %d0,%d1         //set up for round call
        movel   #0x20000000,%d0 //set sticky for round
        bclrb   #sign_bit,FPTEMP_EX(%a6)
        sne     FPTEMP_SGN(%a6)
        bsrl    round           //round result to users rmode & prec
        bfclr   FPTEMP_SGN(%a6){#0:#8}  //convert back to IEEE ext format
        beqs    add_s_sclr
        bsetb   #sign_bit,FPTEMP_EX(%a6)
add_s_sclr:
        leal    WBTEMP(%a6),%a0
        movel   FPTEMP(%a6),(%a0)       //write result to wbtemp
        movel   FPTEMP_HI(%a6),4(%a0)
        movel   FPTEMP_LO(%a6),8(%a0)
        tstw    FPTEMP_EX(%a6)
        bgt     add_ckovf
        orl     #neg_mask,USER_FPSR(%a6)
add_ckovf:
        movew   WBTEMP_EX(%a6),%d0
        andiw   #0x7fff,%d0
        cmpiw   #0x7fff,%d0
        bne     frcfpnr
//
// The result has overflowed to $7fff exponent.  Set I, ovfl,
// and aovfl, and clr the mantissa (incorrectly set by the
// round routine.)
//
        orl     #inf_mask+ovfl_inx_mask,USER_FPSR(%a6)  
        clrl    4(%a0)
        bra     frcfpnr
//
// Inst is fsub.
//
wrap_sub:
        cmpb    #0xff,DNRM_FLG(%a6) //if both ops denorm, 
        beq     fix_stk          //restore to fpu
//
// One of the ops is denormalized.  Test for wrap condition
// and complete the instruction.
//
        cmpb    #0x0f,DNRM_FLG(%a6) //check for dest denorm
        bnes    sub_srcd
sub_destd:
        bsrl    ckinf_ns
        bne     fix_stk
        bfextu  ETEMP_EX(%a6){#1:#15},%d0       //get src exp (always pos)
        bfexts  FPTEMP_EX(%a6){#1:#15},%d1      //get dest exp (always neg)
        subl    %d1,%d0                 //subtract src from dest
        cmpl    #0x8000,%d0
        blt     fix_stk                 //if less, not wrap case
        bra     sub_wrap
sub_srcd:
        bsrl    ckinf_nd
        bne     fix_stk
        bfextu  FPTEMP_EX(%a6){#1:#15},%d0      //get dest exp (always pos)
        bfexts  ETEMP_EX(%a6){#1:#15},%d1       //get src exp (always neg)
        subl    %d1,%d0                 //subtract dest from src
        cmpl    #0x8000,%d0
        blt     fix_stk                 //if less, not wrap case
//
// Check the signs of the operands.  If they are alike, the fpu
// can be used to subtract from the norm 1.0 with the sign of the
// denorm and it will correctly generate the result in extended
// precision.  We can then call round with no sticky and the result
// will be correct for the user's rounding mode and precision.  If
// the signs are unlike, we call round with the sticky bit set
// and the result will be correct for the user's rounding mode and
// precision.
//
sub_wrap:
        movew   ETEMP_EX(%a6),%d0
        movew   FPTEMP_EX(%a6),%d1
        eorw    %d1,%d0
        andiw   #0x8000,%d0
        bne     sub_diff
//
// The signs are alike.
//
        cmpb    #0x0f,DNRM_FLG(%a6) //is dest the denorm?
        bnes    sub_u_srcd
        movew   FPTEMP_EX(%a6),%d0
        andiw   #0x8000,%d0
        orw     #0x3fff,%d0     //force the exponent to +/- 1
        movew   %d0,FPTEMP_EX(%a6) //in the denorm
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        fmovel  %d0,%fpcr               //set up users rmode and X
        fmovex  FPTEMP(%a6),%fp0
        fsubx   ETEMP(%a6),%fp0
        fmovel  %fpsr,%d1
        orl     %d1,USER_FPSR(%a6) //capture cc's and inex from fadd
        leal    WBTEMP(%a6),%a0 //point a0 to wbtemp in frame
        fmovex  %fp0,WBTEMP(%a6)        //write result to memory
        lsrl    #4,%d0          //put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          //put precision in upper word
        swap    %d1
        orl     %d0,%d1         //set up for round call
        clrl    %d0             //force sticky to zero
        bclrb   #sign_bit,WBTEMP_EX(%a6)
        sne     WBTEMP_SGN(%a6)
        bsrl    round           //round result to users rmode & prec
        bfclr   WBTEMP_SGN(%a6){#0:#8}  //convert back to IEEE ext format
        beq     frcfpnr
        bsetb   #sign_bit,WBTEMP_EX(%a6)
        bra     frcfpnr
sub_u_srcd:
        movew   ETEMP_EX(%a6),%d0
        andiw   #0x8000,%d0
        orw     #0x3fff,%d0     //force the exponent to +/- 1
        movew   %d0,ETEMP_EX(%a6) //in the denorm
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        fmovel  %d0,%fpcr               //set up users rmode and X
        fmovex  FPTEMP(%a6),%fp0
        fsubx   ETEMP(%a6),%fp0
        fmovel  %fpsr,%d1
        orl     %d1,USER_FPSR(%a6) //capture cc's and inex from fadd
        leal    WBTEMP(%a6),%a0 //point a0 to wbtemp in frame
        fmovex  %fp0,WBTEMP(%a6)        //write result to memory
        lsrl    #4,%d0          //put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          //put precision in upper word
        swap    %d1
        orl     %d0,%d1         //set up for round call
        clrl    %d0             //force sticky to zero
        bclrb   #sign_bit,WBTEMP_EX(%a6)
        sne     WBTEMP_SGN(%a6)
        bsrl    round           //round result to users rmode & prec
        bfclr   WBTEMP_SGN(%a6){#0:#8}  //convert back to IEEE ext format
        beq     frcfpnr
        bsetb   #sign_bit,WBTEMP_EX(%a6)
        bra     frcfpnr
//
// Signs are unlike:
//
sub_diff:
        cmpb    #0x0f,DNRM_FLG(%a6) //is dest the denorm?
        bnes    sub_s_srcd
sub_s_destd:
        leal    ETEMP(%a6),%a0
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        lsrl    #4,%d0          //put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          //put precision in upper word
        swap    %d1
        orl     %d0,%d1         //set up for round call
        movel   #0x20000000,%d0 //set sticky for round
//
// Since the dest is the denorm, the sign is the opposite of the
// norm sign.
//
        eoriw   #0x8000,ETEMP_EX(%a6)   //flip sign on result
        tstw    ETEMP_EX(%a6)
        bgts    sub_s_dwr
        orl     #neg_mask,USER_FPSR(%a6)
sub_s_dwr:
        bclrb   #sign_bit,ETEMP_EX(%a6)
        sne     ETEMP_SGN(%a6)
        bsrl    round           //round result to users rmode & prec
        bfclr   ETEMP_SGN(%a6){#0:#8}   //convert back to IEEE ext format
        beqs    sub_s_dclr
        bsetb   #sign_bit,ETEMP_EX(%a6)
sub_s_dclr:
        leal    WBTEMP(%a6),%a0
        movel   ETEMP(%a6),(%a0)        //write result to wbtemp
        movel   ETEMP_HI(%a6),4(%a0)
        movel   ETEMP_LO(%a6),8(%a0)
        bra     sub_ckovf
sub_s_srcd:
        leal    FPTEMP(%a6),%a0
        movel   USER_FPCR(%a6),%d0
        andil   #0x30,%d0
        lsrl    #4,%d0          //put rmode in lower 2 bits
        movel   USER_FPCR(%a6),%d1
        andil   #0xc0,%d1
        lsrl    #6,%d1          //put precision in upper word
        swap    %d1
        orl     %d0,%d1         //set up for round call
        movel   #0x20000000,%d0 //set sticky for round
        bclrb   #sign_bit,FPTEMP_EX(%a6)
        sne     FPTEMP_SGN(%a6)
        bsrl    round           //round result to users rmode & prec
        bfclr   FPTEMP_SGN(%a6){#0:#8}  //convert back to IEEE ext format
        beqs    sub_s_sclr
        bsetb   #sign_bit,FPTEMP_EX(%a6)
sub_s_sclr:
        leal    WBTEMP(%a6),%a0
        movel   FPTEMP(%a6),(%a0)       //write result to wbtemp
        movel   FPTEMP_HI(%a6),4(%a0)
        movel   FPTEMP_LO(%a6),8(%a0)
        tstw    FPTEMP_EX(%a6)
        bgt     sub_ckovf
        orl     #neg_mask,USER_FPSR(%a6)
sub_ckovf:
        movew   WBTEMP_EX(%a6),%d0
        andiw   #0x7fff,%d0
        cmpiw   #0x7fff,%d0
        bne     frcfpnr
//
// The result has overflowed to $7fff exponent.  Set I, ovfl,
// and aovfl, and clr the mantissa (incorrectly set by the
// round routine.)
//
        orl     #inf_mask+ovfl_inx_mask,USER_FPSR(%a6)  
        clrl    4(%a0)
        bra     frcfpnr
//
// Inst is fcmp.
//
wrap_cmp:
        cmpb    #0xff,DNRM_FLG(%a6) //if both ops denorm, 
        beq     fix_stk          //restore to fpu
//
// One of the ops is denormalized.  Test for wrap condition
// and complete the instruction.
//
        cmpb    #0x0f,DNRM_FLG(%a6) //check for dest denorm
        bnes    cmp_srcd
cmp_destd:
        bsrl    ckinf_ns
        bne     fix_stk
        bfextu  ETEMP_EX(%a6){#1:#15},%d0       //get src exp (always pos)
        bfexts  FPTEMP_EX(%a6){#1:#15},%d1      //get dest exp (always neg)
        subl    %d1,%d0                 //subtract dest from src
        cmpl    #0x8000,%d0
        blt     fix_stk                 //if less, not wrap case
        tstw    ETEMP_EX(%a6)           //set N to ~sign_of(src)
        bge     cmp_setn
        rts
cmp_srcd:
        bsrl    ckinf_nd
        bne     fix_stk
        bfextu  FPTEMP_EX(%a6){#1:#15},%d0      //get dest exp (always pos)
        bfexts  ETEMP_EX(%a6){#1:#15},%d1       //get src exp (always neg)
        subl    %d1,%d0                 //subtract src from dest
        cmpl    #0x8000,%d0
        blt     fix_stk                 //if less, not wrap case
        tstw    FPTEMP_EX(%a6)          //set N to sign_of(dest)
        blt     cmp_setn
        rts
cmp_setn:
        orl     #neg_mask,USER_FPSR(%a6)
        rts

//
// Inst is fmul.
//
wrap_mul:
        cmpb    #0xff,DNRM_FLG(%a6) //if both ops denorm, 
        beq     force_unf       //force an underflow (really!)
//
// One of the ops is denormalized.  Test for wrap condition
// and complete the instruction.
//
        cmpb    #0x0f,DNRM_FLG(%a6) //check for dest denorm
        bnes    mul_srcd
mul_destd:
        bsrl    ckinf_ns
        bne     fix_stk
        bfextu  ETEMP_EX(%a6){#1:#15},%d0       //get src exp (always pos)
        bfexts  FPTEMP_EX(%a6){#1:#15},%d1      //get dest exp (always neg)
        addl    %d1,%d0                 //subtract dest from src
        bgt     fix_stk
        bra     force_unf
mul_srcd:
        bsrl    ckinf_nd
        bne     fix_stk
        bfextu  FPTEMP_EX(%a6){#1:#15},%d0      //get dest exp (always pos)
        bfexts  ETEMP_EX(%a6){#1:#15},%d1       //get src exp (always neg)
        addl    %d1,%d0                 //subtract src from dest
        bgt     fix_stk
        
//
// This code handles the case of the instruction resulting in 
// an underflow condition.
//
force_unf:
        bclrb   #E1,E_BYTE(%a6)
        orl     #unfinx_mask,USER_FPSR(%a6)
        clrw    NMNEXC(%a6)
        clrb    WBTEMP_SGN(%a6)
        movew   ETEMP_EX(%a6),%d0               //find the sign of the result
        movew   FPTEMP_EX(%a6),%d1
        eorw    %d1,%d0
        andiw   #0x8000,%d0
        beqs    frcunfcont
        st      WBTEMP_SGN(%a6)
frcunfcont:
        lea     WBTEMP(%a6),%a0         //point a0 to memory location
        movew   CMDREG1B(%a6),%d0
        btstl   #6,%d0                  //test for forced precision
        beqs    frcunf_fpcr
        btstl   #2,%d0                  //check for double
        bnes    frcunf_dbl
        movel   #0x1,%d0                        //inst is forced single
        bras    frcunf_rnd
frcunf_dbl:
        movel   #0x2,%d0                        //inst is forced double
        bras    frcunf_rnd
frcunf_fpcr:
        bfextu  FPCR_MODE(%a6){#0:#2},%d0       //inst not forced - use fpcr prec
frcunf_rnd:
        bsrl    unf_sub                 //get correct result based on
//                                      ;round precision/mode.  This 
//                                      ;sets FPSR_CC correctly
        bfclr   WBTEMP_SGN(%a6){#0:#8}  //convert back to IEEE ext format
        beqs    frcfpn
        bsetb   #sign_bit,WBTEMP_EX(%a6)
        bra     frcfpn

//
// Write the result to the user's fpn.  All results must be HUGE to be
// written; otherwise the results would have overflowed or underflowed.
// If the rounding precision is single or double, the ovf_res routine
// is needed to correctly supply the max value.
//
frcfpnr:
        movew   CMDREG1B(%a6),%d0
        btstl   #6,%d0                  //test for forced precision
        beqs    frcfpn_fpcr
        btstl   #2,%d0                  //check for double
        bnes    frcfpn_dbl
        movel   #0x1,%d0                        //inst is forced single
        bras    frcfpn_rnd
frcfpn_dbl:
        movel   #0x2,%d0                        //inst is forced double
        bras    frcfpn_rnd
frcfpn_fpcr:
        bfextu  FPCR_MODE(%a6){#0:#2},%d0       //inst not forced - use fpcr prec
        tstb    %d0
        beqs    frcfpn                  //if extended, write what you got
frcfpn_rnd:
        bclrb   #sign_bit,WBTEMP_EX(%a6)
        sne     WBTEMP_SGN(%a6)
        bsrl    ovf_res                 //get correct result based on
//                                      ;round precision/mode.  This 
//                                      ;sets FPSR_CC correctly
        bfclr   WBTEMP_SGN(%a6){#0:#8}  //convert back to IEEE ext format
        beqs    frcfpn_clr
        bsetb   #sign_bit,WBTEMP_EX(%a6)
frcfpn_clr:
        orl     #ovfinx_mask,USER_FPSR(%a6)
// 
// Perform the write.
//
frcfpn:
        bfextu  CMDREG1B(%a6){#6:#3},%d0        //extract fp destination register
        cmpib   #3,%d0
        bles    frc0123                 //check if dest is fp0-fp3
        movel   #7,%d1
        subl    %d0,%d1
        clrl    %d0
        bsetl   %d1,%d0
        fmovemx WBTEMP(%a6),%d0
        rts
frc0123:
        cmpib   #0,%d0
        beqs    frc0_dst
        cmpib   #1,%d0
        beqs    frc1_dst 
        cmpib   #2,%d0
        beqs    frc2_dst 
frc3_dst:
        movel   WBTEMP_EX(%a6),USER_FP3(%a6)
        movel   WBTEMP_HI(%a6),USER_FP3+4(%a6)
        movel   WBTEMP_LO(%a6),USER_FP3+8(%a6)
        rts
frc2_dst:
        movel   WBTEMP_EX(%a6),USER_FP2(%a6)
        movel   WBTEMP_HI(%a6),USER_FP2+4(%a6)
        movel   WBTEMP_LO(%a6),USER_FP2+8(%a6)
        rts
frc1_dst:
        movel   WBTEMP_EX(%a6),USER_FP1(%a6)
        movel   WBTEMP_HI(%a6),USER_FP1+4(%a6)
        movel   WBTEMP_LO(%a6),USER_FP1+8(%a6)
        rts
frc0_dst:
        movel   WBTEMP_EX(%a6),USER_FP0(%a6)
        movel   WBTEMP_HI(%a6),USER_FP0+4(%a6)
        movel   WBTEMP_LO(%a6),USER_FP0+8(%a6)
        rts

//
// Write etemp to fpn.
// A check is made on enabled and signalled snan exceptions,
// and the destination is not overwritten if this condition exists.
// This code is designed to make fmoveins of unsupported data types
// faster.
//
wr_etemp:
        btstb   #snan_bit,FPSR_EXCEPT(%a6)      //if snan is set, and
        beqs    fmoveinc                //enabled, force restore
        btstb   #snan_bit,FPCR_ENABLE(%a6) //and don't overwrite
        beqs    fmoveinc                //the dest
        movel   ETEMP_EX(%a6),FPTEMP_EX(%a6)    //set up fptemp sign for 
//                                              ;snan handler
        tstb    ETEMP(%a6)              //check for negative
        blts    snan_neg
        rts
snan_neg:
        orl     #neg_bit,USER_FPSR(%a6) //snan is negative; set N
        rts
fmoveinc:
        clrw    NMNEXC(%a6)
        bclrb   #E1,E_BYTE(%a6)
        moveb   STAG(%a6),%d0           //check if stag is inf
        andib   #0xe0,%d0
        cmpib   #0x40,%d0
        bnes    fminc_cnan
        orl     #inf_mask,USER_FPSR(%a6) //if inf, nothing yet has set I
        tstw    LOCAL_EX(%a0)           //check sign
        bges    fminc_con
        orl     #neg_mask,USER_FPSR(%a6)
        bra     fminc_con
fminc_cnan:
        cmpib   #0x60,%d0                       //check if stag is NaN
        bnes    fminc_czero
        orl     #nan_mask,USER_FPSR(%a6) //if nan, nothing yet has set NaN
        movel   ETEMP_EX(%a6),FPTEMP_EX(%a6)    //set up fptemp sign for 
//                                              ;snan handler
        tstw    LOCAL_EX(%a0)           //check sign
        bges    fminc_con
        orl     #neg_mask,USER_FPSR(%a6)
        bra     fminc_con
fminc_czero:
        cmpib   #0x20,%d0                       //check if zero
        bnes    fminc_con
        orl     #z_mask,USER_FPSR(%a6)  //if zero, set Z
        tstw    LOCAL_EX(%a0)           //check sign
        bges    fminc_con
        orl     #neg_mask,USER_FPSR(%a6)
fminc_con:
        bfextu  CMDREG1B(%a6){#6:#3},%d0        //extract fp destination register
        cmpib   #3,%d0
        bles    fp0123                  //check if dest is fp0-fp3
        movel   #7,%d1
        subl    %d0,%d1
        clrl    %d0
        bsetl   %d1,%d0
        fmovemx ETEMP(%a6),%d0
        rts

fp0123:
        cmpib   #0,%d0
        beqs    fp0_dst
        cmpib   #1,%d0
        beqs    fp1_dst 
        cmpib   #2,%d0
        beqs    fp2_dst 
fp3_dst:
        movel   ETEMP_EX(%a6),USER_FP3(%a6)
        movel   ETEMP_HI(%a6),USER_FP3+4(%a6)
        movel   ETEMP_LO(%a6),USER_FP3+8(%a6)
        rts
fp2_dst:
        movel   ETEMP_EX(%a6),USER_FP2(%a6)
        movel   ETEMP_HI(%a6),USER_FP2+4(%a6)
        movel   ETEMP_LO(%a6),USER_FP2+8(%a6)
        rts
fp1_dst:
        movel   ETEMP_EX(%a6),USER_FP1(%a6)
        movel   ETEMP_HI(%a6),USER_FP1+4(%a6)
        movel   ETEMP_LO(%a6),USER_FP1+8(%a6)
        rts
fp0_dst:
        movel   ETEMP_EX(%a6),USER_FP0(%a6)
        movel   ETEMP_HI(%a6),USER_FP0+4(%a6)
        movel   ETEMP_LO(%a6),USER_FP0+8(%a6)
        rts

opclass3:
        st      CU_ONLY(%a6)
        movew   CMDREG1B(%a6),%d0       //check if packed moveout
        andiw   #0x0c00,%d0     //isolate last 2 bits of size field
        cmpiw   #0x0c00,%d0     //if size is 011 or 111, it is packed
        beq     pack_out        //else it is norm or denorm
        bra     mv_out

        
//
//      MOVE OUT
//

mv_tbl:
        .long   li
        .long   sgp
        .long   xp
        .long   mvout_end       //should never be taken
        .long   wi
        .long   dp
        .long   bi
        .long   mvout_end       //should never be taken
mv_out:
        bfextu  CMDREG1B(%a6){#3:#3},%d1        //put source specifier in d1
        leal    mv_tbl,%a0
        movel   %a0@(%d1:l:4),%a0
        jmp     (%a0)

//
// This exit is for move-out to memory.  The aunfl bit is 
// set if the result is inex and unfl is signalled.
//
mvout_end:
        btstb   #inex2_bit,FPSR_EXCEPT(%a6)
        beqs    no_aufl
        btstb   #unfl_bit,FPSR_EXCEPT(%a6)
        beqs    no_aufl
        bsetb   #aunfl_bit,FPSR_AEXCEPT(%a6)
no_aufl:
        clrw    NMNEXC(%a6)
        bclrb   #E1,E_BYTE(%a6)
        fmovel  #0,%FPSR                        //clear any cc bits from res_func
//
// Return ETEMP to extended format from internal extended format so
// that gen_except will have a correctly signed value for ovfl/unfl
// handlers.
//
        bfclr   ETEMP_SGN(%a6){#0:#8}
        beqs    mvout_con
        bsetb   #sign_bit,ETEMP_EX(%a6)
mvout_con:
        rts
//
// This exit is for move-out to int register.  The aunfl bit is 
// not set in any case for this move.
//
mvouti_end:
        clrw    NMNEXC(%a6)
        bclrb   #E1,E_BYTE(%a6)
        fmovel  #0,%FPSR                        //clear any cc bits from res_func
//
// Return ETEMP to extended format from internal extended format so
// that gen_except will have a correctly signed value for ovfl/unfl
// handlers.
//
        bfclr   ETEMP_SGN(%a6){#0:#8}
        beqs    mvouti_con
        bsetb   #sign_bit,ETEMP_EX(%a6)
mvouti_con:
        rts
//
// li is used to handle a long integer source specifier
//

li:
        moveql  #4,%d0          //set byte count

        btstb   #7,STAG(%a6)    //check for extended denorm
        bne     int_dnrm        //if so, branch

        fmovemx ETEMP(%a6),%fp0-%fp0
        fcmpd   #0x41dfffffffc00000,%fp0
// 41dfffffffc00000 in dbl prec = 401d0000fffffffe00000000 in ext prec
        fbge    lo_plrg 
        fcmpd   #0xc1e0000000000000,%fp0
// c1e0000000000000 in dbl prec = c01e00008000000000000000 in ext prec
        fble    lo_nlrg
//
// at this point, the answer is between the largest pos and neg values
//
        movel   USER_FPCR(%a6),%d1      //use user's rounding mode
        andil   #0x30,%d1
        fmovel  %d1,%fpcr
        fmovel  %fp0,L_SCR1(%a6)        //let the 040 perform conversion
        fmovel %fpsr,%d1
        orl     %d1,USER_FPSR(%a6)      //capture inex2/ainex if set
        bra     int_wrt


lo_plrg:
        movel   #0x7fffffff,L_SCR1(%a6) //answer is largest positive int
        fbeq    int_wrt                 //exact answer
        fcmpd   #0x41dfffffffe00000,%fp0
// 41dfffffffe00000 in dbl prec = 401d0000ffffffff00000000 in ext prec
        fbge    int_operr               //set operr
        bra     int_inx                 //set inexact

lo_nlrg:
        movel   #0x80000000,L_SCR1(%a6)
        fbeq    int_wrt                 //exact answer
        fcmpd   #0xc1e0000000100000,%fp0
// c1e0000000100000 in dbl prec = c01e00008000000080000000 in ext prec
        fblt    int_operr               //set operr
        bra     int_inx                 //set inexact

//
// wi is used to handle a word integer source specifier
//

wi:
        moveql  #2,%d0          //set byte count

        btstb   #7,STAG(%a6)    //check for extended denorm
        bne     int_dnrm        //branch if so

        fmovemx ETEMP(%a6),%fp0-%fp0
        fcmps   #0x46fffe00,%fp0
// 46fffe00 in sgl prec = 400d0000fffe000000000000 in ext prec
        fbge    wo_plrg 
        fcmps   #0xc7000000,%fp0
// c7000000 in sgl prec = c00e00008000000000000000 in ext prec
        fble    wo_nlrg

//
// at this point, the answer is between the largest pos and neg values
//
        movel   USER_FPCR(%a6),%d1      //use user's rounding mode
        andil   #0x30,%d1
        fmovel  %d1,%fpcr
        fmovew  %fp0,L_SCR1(%a6)        //let the 040 perform conversion
        fmovel %fpsr,%d1
        orl     %d1,USER_FPSR(%a6)      //capture inex2/ainex if set
        bra     int_wrt

wo_plrg:
        movew   #0x7fff,L_SCR1(%a6)     //answer is largest positive int
        fbeq    int_wrt                 //exact answer
        fcmps   #0x46ffff00,%fp0
// 46ffff00 in sgl prec = 400d0000ffff000000000000 in ext prec
        fbge    int_operr               //set operr
        bra     int_inx                 //set inexact

wo_nlrg:
        movew   #0x8000,L_SCR1(%a6)
        fbeq    int_wrt                 //exact answer
        fcmps   #0xc7000080,%fp0
// c7000080 in sgl prec = c00e00008000800000000000 in ext prec
        fblt    int_operr               //set operr
        bra     int_inx                 //set inexact

//
// bi is used to handle a byte integer source specifier
//

bi:
        moveql  #1,%d0          //set byte count

        btstb   #7,STAG(%a6)    //check for extended denorm
        bne     int_dnrm        //branch if so

        fmovemx ETEMP(%a6),%fp0-%fp0
        fcmps   #0x42fe0000,%fp0
// 42fe0000 in sgl prec = 40050000fe00000000000000 in ext prec
        fbge    by_plrg 
        fcmps   #0xc3000000,%fp0
// c3000000 in sgl prec = c00600008000000000000000 in ext prec
        fble    by_nlrg

//
// at this point, the answer is between the largest pos and neg values
//
        movel   USER_FPCR(%a6),%d1      //use user's rounding mode
        andil   #0x30,%d1
        fmovel  %d1,%fpcr
        fmoveb  %fp0,L_SCR1(%a6)        //let the 040 perform conversion
        fmovel %fpsr,%d1
        orl     %d1,USER_FPSR(%a6)      //capture inex2/ainex if set
        bra     int_wrt

by_plrg:
        moveb   #0x7f,L_SCR1(%a6)               //answer is largest positive int
        fbeq    int_wrt                 //exact answer
        fcmps   #0x42ff0000,%fp0
// 42ff0000 in sgl prec = 40050000ff00000000000000 in ext prec
        fbge    int_operr               //set operr
        bra     int_inx                 //set inexact

by_nlrg:
        moveb   #0x80,L_SCR1(%a6)
        fbeq    int_wrt                 //exact answer
        fcmps   #0xc3008000,%fp0
// c3008000 in sgl prec = c00600008080000000000000 in ext prec
        fblt    int_operr               //set operr
        bra     int_inx                 //set inexact

//
// Common integer routines
//
// int_drnrm---account for possible nonzero result for round up with positive
// operand and round down for negative answer.  In the first case (result = 1)
// byte-width (store in d0) of result must be honored.  In the second case,
// -1 in L_SCR1(a6) will cover all contingencies (FMOVE.B/W/L out).

int_dnrm:
        movel   #0,L_SCR1(%a6)  // initialize result to 0
        bfextu  FPCR_MODE(%a6){#2:#2},%d1       // d1 is the rounding mode
        cmpb    #2,%d1          
        bmis    int_inx         // if RN or RZ, done
        bnes    int_rp          // if RP, continue below
        tstw    ETEMP(%a6)      // RM: store -1 in L_SCR1 if src is negative
        bpls    int_inx         // otherwise result is 0
        movel   #-1,L_SCR1(%a6)
        bras    int_inx
int_rp:
        tstw    ETEMP(%a6)      // RP: store +1 of proper width in L_SCR1 if
//                              ; source is greater than 0
        bmis    int_inx         // otherwise, result is 0
        lea     L_SCR1(%a6),%a1 // a1 is address of L_SCR1
        addal   %d0,%a1         // offset by destination width -1
        subal   #1,%a1          
        bsetb   #0,(%a1)                // set low bit at a1 address
int_inx:
        oril    #inx2a_mask,USER_FPSR(%a6)
        bras    int_wrt
int_operr:
        fmovemx %fp0-%fp0,FPTEMP(%a6)   //FPTEMP must contain the extended
//                              ;precision source that needs to be
//                              ;converted to integer this is required
//                              ;if the operr exception is enabled.
//                              ;set operr/aiop (no inex2 on int ovfl)

        oril    #opaop_mask,USER_FPSR(%a6)
//                              ;fall through to perform int_wrt
int_wrt: 
        movel   EXC_EA(%a6),%a1 //load destination address
        tstl    %a1             //check to see if it is a dest register
        beqs    wrt_dn          //write data register 
        lea     L_SCR1(%a6),%a0 //point to supervisor source address
        bsrl    mem_write
        bra     mvouti_end

wrt_dn:
        movel   %d0,-(%sp)      //d0 currently contains the size to write
        bsrl    get_fline       //get_fline returns Dn in d0
        andiw   #0x7,%d0                //isolate register
        movel   (%sp)+,%d1      //get size
        cmpil   #4,%d1          //most frequent case
        beqs    sz_long
        cmpil   #2,%d1
        bnes    sz_con
        orl     #8,%d0          //add 'word' size to register#
        bras    sz_con
sz_long:
        orl     #0x10,%d0               //add 'long' size to register#
sz_con:
        movel   %d0,%d1         //reg_dest expects size:reg in d1
        bsrl    reg_dest        //load proper data register
        bra     mvouti_end 
xp:
        lea     ETEMP(%a6),%a0
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)
        btstb   #7,STAG(%a6)    //check for extended denorm
        bne     xdnrm
        clrl    %d0
        bras    do_fp           //do normal case
sgp:
        lea     ETEMP(%a6),%a0
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)
        btstb   #7,STAG(%a6)    //check for extended denorm
        bne     sp_catas        //branch if so
        movew   LOCAL_EX(%a0),%d0
        lea     sp_bnds,%a1
        cmpw    (%a1),%d0
        blt     sp_under
        cmpw    2(%a1),%d0
        bgt     sp_over
        movel   #1,%d0          //set destination format to single
        bras    do_fp           //do normal case
dp:
        lea     ETEMP(%a6),%a0
        bclrb   #sign_bit,LOCAL_EX(%a0)
        sne     LOCAL_SGN(%a0)

        btstb   #7,STAG(%a6)    //check for extended denorm
        bne     dp_catas        //branch if so

        movew   LOCAL_EX(%a0),%d0
        lea     dp_bnds,%a1

        cmpw    (%a1),%d0
        blt     dp_under
        cmpw    2(%a1),%d0
        bgt     dp_over
        
        movel   #2,%d0          //set destination format to double
//                              ;fall through to do_fp
//
do_fp:
        bfextu  FPCR_MODE(%a6){#2:#2},%d1       //rnd mode in d1
        swap    %d0                     //rnd prec in upper word
        addl    %d0,%d1                 //d1 has PREC/MODE info
        
        clrl    %d0                     //clear g,r,s 

        bsrl    round                   //round 

        movel   %a0,%a1
        movel   EXC_EA(%a6),%a0

        bfextu  CMDREG1B(%a6){#3:#3},%d1        //extract destination format
//                                      ;at this point only the dest
//                                      ;formats sgl, dbl, ext are
//                                      ;possible
        cmpb    #2,%d1
        bgts    ddbl                    //double=5, extended=2, single=1
        bnes    dsgl
//                                      ;fall through to dext
dext:
        bsrl    dest_ext
        bra     mvout_end
dsgl:
        bsrl    dest_sgl
        bra     mvout_end
ddbl:
        bsrl    dest_dbl
        bra     mvout_end

//
// Handle possible denorm or catastrophic underflow cases here
//
xdnrm:
        bsr     set_xop         //initialize WBTEMP
        bsetb   #wbtemp15_bit,WB_BYTE(%a6) //set wbtemp15

        movel   %a0,%a1
        movel   EXC_EA(%a6),%a0 //a0 has the destination pointer
        bsrl    dest_ext        //store to memory
        bsetb   #unfl_bit,FPSR_EXCEPT(%a6)
        bra     mvout_end
        
sp_under:
        bsetb   #etemp15_bit,STAG(%a6)

        cmpw    4(%a1),%d0
        blts    sp_catas        //catastrophic underflow case   

        movel   #1,%d0          //load in round precision
        movel   #sgl_thresh,%d1 //load in single denorm threshold
        bsrl    dpspdnrm        //expects d1 to have the proper
//                              ;denorm threshold
        bsrl    dest_sgl        //stores value to destination
        bsetb   #unfl_bit,FPSR_EXCEPT(%a6)
        bra     mvout_end       //exit

dp_under:
        bsetb   #etemp15_bit,STAG(%a6)

        cmpw    4(%a1),%d0
        blts    dp_catas        //catastrophic underflow case
                
        movel   #dbl_thresh,%d1 //load in double precision threshold
        movel   #2,%d0          
        bsrl    dpspdnrm        //expects d1 to have proper
//                              ;denorm threshold
//                              ;expects d0 to have round precision
        bsrl    dest_dbl        //store value to destination
        bsetb   #unfl_bit,FPSR_EXCEPT(%a6)
        bra     mvout_end       //exit

//
// Handle catastrophic underflow cases here
//
sp_catas:
// Temp fix for z bit set in unf_sub
        movel   USER_FPSR(%a6),-(%a7)

        movel   #1,%d0          //set round precision to sgl

        bsrl    unf_sub         //a0 points to result

        movel   (%a7)+,USER_FPSR(%a6)

        movel   #1,%d0
        subw    %d0,LOCAL_EX(%a0) //account for difference between
//                              ;denorm/norm bias

        movel   %a0,%a1         //a1 has the operand input
        movel   EXC_EA(%a6),%a0 //a0 has the destination pointer
        
        bsrl    dest_sgl        //store the result
        oril    #unfinx_mask,USER_FPSR(%a6)
        bra     mvout_end
        
dp_catas:
// Temp fix for z bit set in unf_sub
        movel   USER_FPSR(%a6),-(%a7)

        movel   #2,%d0          //set round precision to dbl
        bsrl    unf_sub         //a0 points to result

        movel   (%a7)+,USER_FPSR(%a6)

        movel   #1,%d0
        subw    %d0,LOCAL_EX(%a0) //account for difference between 
//                              ;denorm/norm bias

        movel   %a0,%a1         //a1 has the operand input
        movel   EXC_EA(%a6),%a0 //a0 has the destination pointer
        
        bsrl    dest_dbl        //store the result
        oril    #unfinx_mask,USER_FPSR(%a6)
        bra     mvout_end

//
// Handle catastrophic overflow cases here
//
sp_over:
// Temp fix for z bit set in unf_sub
        movel   USER_FPSR(%a6),-(%a7)

        movel   #1,%d0
        leal    FP_SCR1(%a6),%a0        //use FP_SCR1 for creating result
        movel   ETEMP_EX(%a6),(%a0)
        movel   ETEMP_HI(%a6),4(%a0)
        movel   ETEMP_LO(%a6),8(%a0)
        bsrl    ovf_res

        movel   (%a7)+,USER_FPSR(%a6)

        movel   %a0,%a1
        movel   EXC_EA(%a6),%a0
        bsrl    dest_sgl
        orl     #ovfinx_mask,USER_FPSR(%a6)
        bra     mvout_end

dp_over:
// Temp fix for z bit set in ovf_res
        movel   USER_FPSR(%a6),-(%a7)

        movel   #2,%d0
        leal    FP_SCR1(%a6),%a0        //use FP_SCR1 for creating result
        movel   ETEMP_EX(%a6),(%a0)
        movel   ETEMP_HI(%a6),4(%a0)
        movel   ETEMP_LO(%a6),8(%a0)
        bsrl    ovf_res

        movel   (%a7)+,USER_FPSR(%a6)

        movel   %a0,%a1
        movel   EXC_EA(%a6),%a0
        bsrl    dest_dbl
        orl     #ovfinx_mask,USER_FPSR(%a6)
        bra     mvout_end

//
//      DPSPDNRM
//
// This subroutine takes an extended normalized number and denormalizes
// it to the given round precision. This subroutine also decrements
// the input operand's exponent by 1 to account for the fact that
// dest_sgl or dest_dbl expects a normalized number's bias.
//
// Input: a0  points to a normalized number in internal extended format
//       d0  is the round precision (=1 for sgl; =2 for dbl)
//       d1  is the the single precision or double precision
//           denorm threshold
//
// Output: (In the format for dest_sgl or dest_dbl)
//       a0   points to the destination
//       a1   points to the operand
//
// Exceptions: Reports inexact 2 exception by setting USER_FPSR bits
//
dpspdnrm:
        movel   %d0,-(%a7)      //save round precision
        clrl    %d0             //clear initial g,r,s
        bsrl    dnrm_lp         //careful with d0, it's needed by round

        bfextu  FPCR_MODE(%a6){#2:#2},%d1 //get rounding mode
        swap    %d1
        movew   2(%a7),%d1      //set rounding precision 
        swap    %d1             //at this point d1 has PREC/MODE info
        bsrl    round           //round result, sets the inex bit in
//                              ;USER_FPSR if needed

        movew   #1,%d0
        subw    %d0,LOCAL_EX(%a0) //account for difference in denorm
//                              ;vs norm bias

        movel   %a0,%a1         //a1 has the operand input
        movel   EXC_EA(%a6),%a0 //a0 has the destination pointer
        addw    #4,%a7          //pop stack
        rts
//
// SET_XOP initialized WBTEMP with the value pointed to by a0
// input: a0 points to input operand in the internal extended format
//
set_xop:
        movel   LOCAL_EX(%a0),WBTEMP_EX(%a6)
        movel   LOCAL_HI(%a0),WBTEMP_HI(%a6)
        movel   LOCAL_LO(%a0),WBTEMP_LO(%a6)
        bfclr   WBTEMP_SGN(%a6){#0:#8}
        beqs    sxop
        bsetb   #sign_bit,WBTEMP_EX(%a6)
sxop:
        bfclr   STAG(%a6){#5:#4}        //clear wbtm66,wbtm1,wbtm0,sbit
        rts
//
//      P_MOVE
//
p_movet:
        .long   p_move
        .long   p_movez
        .long   p_movei
        .long   p_moven
        .long   p_move
p_regd:
        .long   p_dyd0
        .long   p_dyd1
        .long   p_dyd2
        .long   p_dyd3
        .long   p_dyd4
        .long   p_dyd5
        .long   p_dyd6
        .long   p_dyd7

pack_out:
        leal    p_movet,%a0     //load jmp table address
        movew   STAG(%a6),%d0   //get source tag
        bfextu  %d0{#16:#3},%d0 //isolate source bits
        movel   (%a0,%d0.w*4),%a0       //load a0 with routine label for tag
        jmp     (%a0)           //go to the routine

p_write:
        movel   #0x0c,%d0       //get byte count
        movel   EXC_EA(%a6),%a1 //get the destination address
        bsr     mem_write       //write the user's destination
        moveb   #0,CU_SAVEPC(%a6) //set the cu save pc to all 0's

//
// Also note that the dtag must be set to norm here - this is because 
// the 040 uses the dtag to execute the correct microcode.
//
        bfclr    DTAG(%a6){#0:#3}  //set dtag to norm

        rts

// Notes on handling of special case (zero, inf, and nan) inputs:
//      1. Operr is not signalled if the k-factor is greater than 18.
//      2. Per the manual, status bits are not set.
//

p_move:
        movew   CMDREG1B(%a6),%d0
        btstl   #kfact_bit,%d0  //test for dynamic k-factor
        beqs    statick         //if clear, k-factor is static
dynamick:
        bfextu  %d0{#25:#3},%d0 //isolate register for dynamic k-factor
        lea     p_regd,%a0
        movel   %a0@(%d0:l:4),%a0
        jmp     (%a0)
statick:
        andiw   #0x007f,%d0     //get k-factor
        bfexts  %d0{#25:#7},%d0 //sign extend d0 for bindec
        leal    ETEMP(%a6),%a0  //a0 will point to the packed decimal
        bsrl    bindec          //perform the convert; data at a6
        leal    FP_SCR1(%a6),%a0        //load a0 with result address
        bral    p_write
p_movez:
        leal    ETEMP(%a6),%a0  //a0 will point to the packed decimal
        clrw    2(%a0)          //clear lower word of exp
        clrl    4(%a0)          //load second lword of ZERO
        clrl    8(%a0)          //load third lword of ZERO
        bra     p_write         //go write results
p_movei:
        fmovel  #0,%FPSR                //clear aiop
        leal    ETEMP(%a6),%a0  //a0 will point to the packed decimal
        clrw    2(%a0)          //clear lower word of exp
        bra     p_write         //go write the result
p_moven:
        leal    ETEMP(%a6),%a0  //a0 will point to the packed decimal
        clrw    2(%a0)          //clear lower word of exp
        bra     p_write         //go write the result

//
// Routines to read the dynamic k-factor from Dn.
//
p_dyd0:
        movel   USER_D0(%a6),%d0
        bras    statick
p_dyd1:
        movel   USER_D1(%a6),%d0
        bras    statick
p_dyd2:
        movel   %d2,%d0
        bras    statick
p_dyd3:
        movel   %d3,%d0
        bras    statick
p_dyd4:
        movel   %d4,%d0
        bras    statick
p_dyd5:
        movel   %d5,%d0
        bras    statick
p_dyd6:
        movel   %d6,%d0
        bra     statick
p_dyd7:
        movel   %d7,%d0
        bra     statick

        |end