Subversion Repositories openrisc_me

//
//      $Id: util.S,v 1.2 2001-09-27 12:01:22 chris Exp $
//
//      util.sa 3.7 7/29/91
//
//      This file contains routines used by other programs.
//
//      ovf_res: used by overflow to force the correct
//               result. ovf_r_k, ovf_r_x2, ovf_r_x3 are 
//               derivatives of this routine.
//      get_fline: get user's opcode word
//      g_dfmtou: returns the destination format.
//      g_opcls: returns the opclass of the float instruction.
//      g_rndpr: returns the rounding precision. 
//      reg_dest: write byte, word, or long data to Dn
//
//
//              Copyright (C) Motorola, Inc. 1990
//                      All Rights Reserved
//
//      THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA 
//      The copyright notice above does not evidence any  
//      actual or intended publication of such source code.

//UTIL  idnt    2,1 | Motorola 040 Floating Point Software Package

        |section        8

#include "fpsp.defs"

        |xref   mem_read

        .global g_dfmtou
        .global g_opcls
        .global g_rndpr
        .global get_fline
        .global reg_dest

//
// Final result table for ovf_res. Note that the negative counterparts
// are unnecessary as ovf_res always returns the sign separately from
// the exponent.
//                                      ;+inf
EXT_PINF:       .long   0x7fff0000,0x00000000,0x00000000,0x00000000     
//                                      ;largest +ext
EXT_PLRG:       .long   0x7ffe0000,0xffffffff,0xffffffff,0x00000000     
//                                      ;largest magnitude +sgl in ext
SGL_PLRG:       .long   0x407e0000,0xffffff00,0x00000000,0x00000000     
//                                      ;largest magnitude +dbl in ext
DBL_PLRG:       .long   0x43fe0000,0xffffffff,0xfffff800,0x00000000     
//                                      ;largest -ext

tblovfl:
        .long   EXT_RN
        .long   EXT_RZ
        .long   EXT_RM
        .long   EXT_RP
        .long   SGL_RN
        .long   SGL_RZ
        .long   SGL_RM
        .long   SGL_RP
        .long   DBL_RN
        .long   DBL_RZ
        .long   DBL_RM
        .long   DBL_RP
        .long   error
        .long   error
        .long   error
        .long   error


//
//      ovf_r_k --- overflow result calculation
//
// This entry point is used by kernel_ex.  
//
// This forces the destination precision to be extended
//
// Input:       operand in ETEMP
// Output:      a result is in ETEMP (internal extended format)
//
        .global ovf_r_k
ovf_r_k:
        lea     ETEMP(%a6),%a0  //a0 points to source operand   
        bclrb   #sign_bit,ETEMP_EX(%a6)
        sne     ETEMP_SGN(%a6)  //convert to internal IEEE format

//
//      ovf_r_x2 --- overflow result calculation
//
// This entry point used by x_ovfl.  (opclass 0 and 2)
//
// Input                a0  points to an operand in the internal extended format
// Output       a0  points to the result in the internal extended format
//
// This sets the round precision according to the user's FPCR unless the
// instruction is fsgldiv or fsglmul or fsadd, fdadd, fsub, fdsub, fsmul,
// fdmul, fsdiv, fddiv, fssqrt, fsmove, fdmove, fsabs, fdabs, fsneg, fdneg.
// If the instruction is fsgldiv of fsglmul, the rounding precision must be
// extended.  If the instruction is not fsgldiv or fsglmul but a force-
// precision instruction, the rounding precision is then set to the force
// precision.

        .global ovf_r_x2
ovf_r_x2:
        btstb   #E3,E_BYTE(%a6)         //check for nu exception
        beql    ovf_e1_exc              //it is cu exception
ovf_e3_exc:
        movew   CMDREG3B(%a6),%d0               //get the command word
        andiw   #0x00000060,%d0         //clear all bits except 6 and 5
        cmpil   #0x00000040,%d0
        beql    ovff_sgl                //force precision is single
        cmpil   #0x00000060,%d0
        beql    ovff_dbl                //force precision is double
        movew   CMDREG3B(%a6),%d0               //get the command word again
        andil   #0x7f,%d0                       //clear all except operation
        cmpil   #0x33,%d0                       
        beql    ovf_fsgl                //fsglmul or fsgldiv
        cmpil   #0x30,%d0
        beql    ovf_fsgl                
        bra     ovf_fpcr                //instruction is none of the above
//                                      ;use FPCR
ovf_e1_exc:
        movew   CMDREG1B(%a6),%d0               //get command word
        andil   #0x00000044,%d0         //clear all bits except 6 and 2
        cmpil   #0x00000040,%d0
        beql    ovff_sgl                //the instruction is force single
        cmpil   #0x00000044,%d0
        beql    ovff_dbl                //the instruction is force double
        movew   CMDREG1B(%a6),%d0               //again get the command word
        andil   #0x0000007f,%d0         //clear all except the op code
        cmpil   #0x00000027,%d0
        beql    ovf_fsgl                //fsglmul
        cmpil   #0x00000024,%d0
        beql    ovf_fsgl                //fsgldiv
        bra     ovf_fpcr                //none of the above, use FPCR
// 
//
// Inst is either fsgldiv or fsglmul.  Force extended precision.
//
ovf_fsgl:
        clrl    %d0
        bra     ovf_res

ovff_sgl:
        movel   #0x00000001,%d0         //set single
        bra     ovf_res
ovff_dbl:
        movel   #0x00000002,%d0         //set double
        bra     ovf_res
//
// The precision is in the fpcr.
//
ovf_fpcr:
        bfextu  FPCR_MODE(%a6){#0:#2},%d0 //set round precision
        bra     ovf_res
        
//
//
//      ovf_r_x3 --- overflow result calculation
//
// This entry point used by x_ovfl. (opclass 3 only)
//
// Input                a0  points to an operand in the internal extended format
// Output       a0  points to the result in the internal extended format
//
// This sets the round precision according to the destination size.
//
        .global ovf_r_x3
ovf_r_x3:
        bsr     g_dfmtou        //get dest fmt in d0{1:0}
//                              ;for fmovout, the destination format
//                              ;is the rounding precision

//
//      ovf_res --- overflow result calculation
//
// Input:
//      a0      points to operand in internal extended format
// Output:
//      a0      points to result in internal extended format
//
        .global ovf_res
ovf_res:
        lsll    #2,%d0          //move round precision to d0{3:2}
        bfextu  FPCR_MODE(%a6){#2:#2},%d1 //set round mode
        orl     %d1,%d0         //index is fmt:mode in d0{3:0}
        leal    tblovfl,%a1     //load a1 with table address
        movel   %a1@(%d0:l:4),%a1       //use d0 as index to the table
        jmp     (%a1)           //go to the correct routine
//
//case DEST_FMT = EXT
//
EXT_RN:
        leal    EXT_PINF,%a1    //answer is +/- infinity
        bsetb   #inf_bit,FPSR_CC(%a6)
        bra     set_sign        //now go set the sign   
EXT_RZ:
        leal    EXT_PLRG,%a1    //answer is +/- large number
        bra     set_sign        //now go set the sign
EXT_RM:
        tstb    LOCAL_SGN(%a0)  //if negative overflow
        beqs    e_rm_pos
e_rm_neg:
        leal    EXT_PINF,%a1    //answer is negative infinity
        orl     #neginf_mask,USER_FPSR(%a6)
        bra     end_ovfr
e_rm_pos:
        leal    EXT_PLRG,%a1    //answer is large positive number
        bra     end_ovfr
EXT_RP:
        tstb    LOCAL_SGN(%a0)  //if negative overflow
        beqs    e_rp_pos
e_rp_neg:
        leal    EXT_PLRG,%a1    //answer is large negative number
        bsetb   #neg_bit,FPSR_CC(%a6)
        bra     end_ovfr
e_rp_pos:
        leal    EXT_PINF,%a1    //answer is positive infinity
        bsetb   #inf_bit,FPSR_CC(%a6)
        bra     end_ovfr
//
//case DEST_FMT = DBL
//
DBL_RN:
        leal    EXT_PINF,%a1    //answer is +/- infinity
        bsetb   #inf_bit,FPSR_CC(%a6)
        bra     set_sign
DBL_RZ:
        leal    DBL_PLRG,%a1    //answer is +/- large number
        bra     set_sign        //now go set the sign
DBL_RM:
        tstb    LOCAL_SGN(%a0)  //if negative overflow
        beqs    d_rm_pos
d_rm_neg:
        leal    EXT_PINF,%a1    //answer is negative infinity
        orl     #neginf_mask,USER_FPSR(%a6)
        bra     end_ovfr        //inf is same for all precisions (ext,dbl,sgl)
d_rm_pos:
        leal    DBL_PLRG,%a1    //answer is large positive number
        bra     end_ovfr
DBL_RP:
        tstb    LOCAL_SGN(%a0)  //if negative overflow
        beqs    d_rp_pos
d_rp_neg:
        leal    DBL_PLRG,%a1    //answer is large negative number
        bsetb   #neg_bit,FPSR_CC(%a6)
        bra     end_ovfr
d_rp_pos:
        leal    EXT_PINF,%a1    //answer is positive infinity
        bsetb   #inf_bit,FPSR_CC(%a6)
        bra     end_ovfr
//
//case DEST_FMT = SGL
//
SGL_RN:
        leal    EXT_PINF,%a1    //answer is +/-  infinity
        bsetb   #inf_bit,FPSR_CC(%a6)
        bras    set_sign
SGL_RZ:
        leal    SGL_PLRG,%a1    //answer is +/- large number
        bras    set_sign
SGL_RM:
        tstb    LOCAL_SGN(%a0)  //if negative overflow
        beqs    s_rm_pos
s_rm_neg:
        leal    EXT_PINF,%a1    //answer is negative infinity
        orl     #neginf_mask,USER_FPSR(%a6)
        bras    end_ovfr
s_rm_pos:
        leal    SGL_PLRG,%a1    //answer is large positive number
        bras    end_ovfr
SGL_RP:
        tstb    LOCAL_SGN(%a0)  //if negative overflow
        beqs    s_rp_pos
s_rp_neg:
        leal    SGL_PLRG,%a1    //answer is large negative number
        bsetb   #neg_bit,FPSR_CC(%a6)
        bras    end_ovfr
s_rp_pos:
        leal    EXT_PINF,%a1    //answer is positive infinity
        bsetb   #inf_bit,FPSR_CC(%a6)
        bras    end_ovfr

set_sign:
        tstb    LOCAL_SGN(%a0)  //if negative overflow
        beqs    end_ovfr
neg_sign:
        bsetb   #neg_bit,FPSR_CC(%a6)

end_ovfr:
        movew   LOCAL_EX(%a1),LOCAL_EX(%a0) //do not overwrite sign
        movel   LOCAL_HI(%a1),LOCAL_HI(%a0)
        movel   LOCAL_LO(%a1),LOCAL_LO(%a0)
        rts


//
//      ERROR
//
error:
        rts
//
//      get_fline --- get f-line opcode of interrupted instruction
//
//      Returns opcode in the low word of d0.
//
get_fline:
        movel   USER_FPIAR(%a6),%a0     //opcode address
        movel   #0,-(%a7)       //reserve a word on the stack
        leal    2(%a7),%a1      //point to low word of temporary
        movel   #2,%d0          //count
        bsrl    mem_read
        movel   (%a7)+,%d0
        rts
//
//      g_rndpr --- put rounding precision in d0{1:0}
//      
//      valid return codes are:
//              00 - extended 
//              01 - single
//              10 - double
//
// begin
// get rounding precision (cmdreg3b{6:5})
// begin
//  case        opclass = 011 (move out)
//      get destination format - this is the also the rounding precision
//
//  case        opclass = 0x0
//      if E3
//          *case RndPr(from cmdreg3b{6:5} = 11  then RND_PREC = DBL
//          *case RndPr(from cmdreg3b{6:5} = 10  then RND_PREC = SGL
//           case RndPr(from cmdreg3b{6:5} = 00 | 01
//              use precision from FPCR{7:6}
//                      case 00 then RND_PREC = EXT
//                      case 01 then RND_PREC = SGL
//                      case 10 then RND_PREC = DBL
//      else E1
//           use precision in FPCR{7:6}
//           case 00 then RND_PREC = EXT
//           case 01 then RND_PREC = SGL
//           case 10 then RND_PREC = DBL
// end
//
g_rndpr:
        bsr     g_opcls         //get opclass in d0{2:0}
        cmpw    #0x0003,%d0     //check for opclass 011
        bnes    op_0x0

//
// For move out instructions (opclass 011) the destination format
// is the same as the rounding precision.  Pass results from g_dfmtou.
//
        bsr     g_dfmtou        
        rts
op_0x0:
        btstb   #E3,E_BYTE(%a6)
        beql    unf_e1_exc      //branch to e1 underflow
unf_e3_exc:
        movel   CMDREG3B(%a6),%d0       //rounding precision in d0{10:9}
        bfextu  %d0{#9:#2},%d0  //move the rounding prec bits to d0{1:0}
        cmpil   #0x2,%d0
        beql    unff_sgl        //force precision is single
        cmpil   #0x3,%d0                //force precision is double
        beql    unff_dbl
        movew   CMDREG3B(%a6),%d0       //get the command word again
        andil   #0x7f,%d0               //clear all except operation
        cmpil   #0x33,%d0                       
        beql    unf_fsgl        //fsglmul or fsgldiv
        cmpil   #0x30,%d0
        beql    unf_fsgl        //fsgldiv or fsglmul
        bra     unf_fpcr
unf_e1_exc:
        movel   CMDREG1B(%a6),%d0       //get 32 bits off the stack, 1st 16 bits
//                              ;are the command word
        andil   #0x00440000,%d0 //clear all bits except bits 6 and 2
        cmpil   #0x00400000,%d0
        beql    unff_sgl        //force single
        cmpil   #0x00440000,%d0 //force double
        beql    unff_dbl
        movel   CMDREG1B(%a6),%d0       //get the command word again
        andil   #0x007f0000,%d0 //clear all bits except the operation
        cmpil   #0x00270000,%d0
        beql    unf_fsgl        //fsglmul
        cmpil   #0x00240000,%d0
        beql    unf_fsgl        //fsgldiv
        bra     unf_fpcr

//
// Convert to return format.  The values from cmdreg3b and the return
// values are:
//      cmdreg3b        return       precision
//      --------        ------       ---------
//        00,01           0             ext
//         10             1             sgl
//         11             2             dbl
// Force single
//
unff_sgl:
        movel   #1,%d0          //return 1
        rts
//
// Force double
//
unff_dbl:
        movel   #2,%d0          //return 2
        rts
//
// Force extended
//
unf_fsgl:
        movel   #0,%d0          
        rts
//
// Get rounding precision set in FPCR{7:6}.
//
unf_fpcr:
        movel   USER_FPCR(%a6),%d0 //rounding precision bits in d0{7:6}
        bfextu  %d0{#24:#2},%d0 //move the rounding prec bits to d0{1:0}
        rts
//
//      g_opcls --- put opclass in d0{2:0}
//
g_opcls:
        btstb   #E3,E_BYTE(%a6)
        beqs    opc_1b          //if set, go to cmdreg1b
opc_3b:
        clrl    %d0             //if E3, only opclass 0x0 is possible
        rts
opc_1b:
        movel   CMDREG1B(%a6),%d0
        bfextu  %d0{#0:#3},%d0  //shift opclass bits d0{31:29} to d0{2:0}
        rts
//
//      g_dfmtou --- put destination format in d0{1:0}
//
//      If E1, the format is from cmdreg1b{12:10}
//      If E3, the format is extended.
//
//      Dest. Fmt.      
//              extended  010 -> 00
//              single    001 -> 01
//              double    101 -> 10
//
g_dfmtou:
        btstb   #E3,E_BYTE(%a6)
        beqs    op011
        clrl    %d0             //if E1, size is always ext
        rts
op011:
        movel   CMDREG1B(%a6),%d0
        bfextu  %d0{#3:#3},%d0  //dest fmt from cmdreg1b{12:10}
        cmpb    #1,%d0          //check for single
        bnes    not_sgl
        movel   #1,%d0
        rts
not_sgl:
        cmpb    #5,%d0          //check for double
        bnes    not_dbl
        movel   #2,%d0
        rts
not_dbl:
        clrl    %d0             //must be extended
        rts

//
//
// Final result table for unf_sub. Note that the negative counterparts
// are unnecessary as unf_sub always returns the sign separately from
// the exponent.
//                                      ;+zero
EXT_PZRO:       .long   0x00000000,0x00000000,0x00000000,0x00000000     
//                                      ;+zero
SGL_PZRO:       .long   0x3f810000,0x00000000,0x00000000,0x00000000     
//                                      ;+zero
DBL_PZRO:       .long   0x3c010000,0x00000000,0x00000000,0x00000000     
//                                      ;smallest +ext denorm
EXT_PSML:       .long   0x00000000,0x00000000,0x00000001,0x00000000     
//                                      ;smallest +sgl denorm
SGL_PSML:       .long   0x3f810000,0x00000100,0x00000000,0x00000000     
//                                      ;smallest +dbl denorm
DBL_PSML:       .long   0x3c010000,0x00000000,0x00000800,0x00000000     
//
//      UNF_SUB --- underflow result calculation
//
// Input:
//      d0      contains round precision
//      a0      points to input operand in the internal extended format
//
// Output:
//      a0      points to correct internal extended precision result.
//

tblunf:
        .long   uEXT_RN
        .long   uEXT_RZ
        .long   uEXT_RM
        .long   uEXT_RP
        .long   uSGL_RN
        .long   uSGL_RZ
        .long   uSGL_RM
        .long   uSGL_RP
        .long   uDBL_RN
        .long   uDBL_RZ
        .long   uDBL_RM
        .long   uDBL_RP
        .long   uDBL_RN
        .long   uDBL_RZ
        .long   uDBL_RM
        .long   uDBL_RP

        .global unf_sub
unf_sub:
        lsll    #2,%d0          //move round precision to d0{3:2}
        bfextu  FPCR_MODE(%a6){#2:#2},%d1 //set round mode
        orl     %d1,%d0         //index is fmt:mode in d0{3:0}
        leal    tblunf,%a1      //load a1 with table address
        movel   %a1@(%d0:l:4),%a1       //use d0 as index to the table
        jmp     (%a1)           //go to the correct routine
//
//case DEST_FMT = EXT
//
uEXT_RN:
        leal    EXT_PZRO,%a1    //answer is +/- zero
        bsetb   #z_bit,FPSR_CC(%a6)
        bra     uset_sign       //now go set the sign   
uEXT_RZ:
        leal    EXT_PZRO,%a1    //answer is +/- zero
        bsetb   #z_bit,FPSR_CC(%a6)
        bra     uset_sign       //now go set the sign
uEXT_RM:
        tstb    LOCAL_SGN(%a0)  //if negative underflow
        beqs    ue_rm_pos
ue_rm_neg:
        leal    EXT_PSML,%a1    //answer is negative smallest denorm
        bsetb   #neg_bit,FPSR_CC(%a6)
        bra     end_unfr
ue_rm_pos:
        leal    EXT_PZRO,%a1    //answer is positive zero
        bsetb   #z_bit,FPSR_CC(%a6)
        bra     end_unfr
uEXT_RP:
        tstb    LOCAL_SGN(%a0)  //if negative underflow
        beqs    ue_rp_pos
ue_rp_neg:
        leal    EXT_PZRO,%a1    //answer is negative zero
        oril    #negz_mask,USER_FPSR(%a6)
        bra     end_unfr
ue_rp_pos:
        leal    EXT_PSML,%a1    //answer is positive smallest denorm
        bra     end_unfr
//
//case DEST_FMT = DBL
//
uDBL_RN:
        leal    DBL_PZRO,%a1    //answer is +/- zero
        bsetb   #z_bit,FPSR_CC(%a6)
        bra     uset_sign
uDBL_RZ:
        leal    DBL_PZRO,%a1    //answer is +/- zero
        bsetb   #z_bit,FPSR_CC(%a6)
        bra     uset_sign       //now go set the sign
uDBL_RM:
        tstb    LOCAL_SGN(%a0)  //if negative overflow
        beqs    ud_rm_pos
ud_rm_neg:
        leal    DBL_PSML,%a1    //answer is smallest denormalized negative
        bsetb   #neg_bit,FPSR_CC(%a6)
        bra     end_unfr
ud_rm_pos:
        leal    DBL_PZRO,%a1    //answer is positive zero
        bsetb   #z_bit,FPSR_CC(%a6)
        bra     end_unfr
uDBL_RP:
        tstb    LOCAL_SGN(%a0)  //if negative overflow
        beqs    ud_rp_pos
ud_rp_neg:
        leal    DBL_PZRO,%a1    //answer is negative zero
        oril    #negz_mask,USER_FPSR(%a6)
        bra     end_unfr
ud_rp_pos:
        leal    DBL_PSML,%a1    //answer is smallest denormalized negative
        bra     end_unfr
//
//case DEST_FMT = SGL
//
uSGL_RN:
        leal    SGL_PZRO,%a1    //answer is +/- zero
        bsetb   #z_bit,FPSR_CC(%a6)
        bras    uset_sign
uSGL_RZ:
        leal    SGL_PZRO,%a1    //answer is +/- zero
        bsetb   #z_bit,FPSR_CC(%a6)
        bras    uset_sign
uSGL_RM:
        tstb    LOCAL_SGN(%a0)  //if negative overflow
        beqs    us_rm_pos
us_rm_neg:
        leal    SGL_PSML,%a1    //answer is smallest denormalized negative
        bsetb   #neg_bit,FPSR_CC(%a6)
        bras    end_unfr
us_rm_pos:
        leal    SGL_PZRO,%a1    //answer is positive zero
        bsetb   #z_bit,FPSR_CC(%a6)
        bras    end_unfr
uSGL_RP:
        tstb    LOCAL_SGN(%a0)  //if negative overflow
        beqs    us_rp_pos
us_rp_neg:
        leal    SGL_PZRO,%a1    //answer is negative zero
        oril    #negz_mask,USER_FPSR(%a6)
        bras    end_unfr
us_rp_pos:
        leal    SGL_PSML,%a1    //answer is smallest denormalized positive
        bras    end_unfr

uset_sign:
        tstb    LOCAL_SGN(%a0)  //if negative overflow
        beqs    end_unfr
uneg_sign:
        bsetb   #neg_bit,FPSR_CC(%a6)

end_unfr:
        movew   LOCAL_EX(%a1),LOCAL_EX(%a0) //be careful not to overwrite sign
        movel   LOCAL_HI(%a1),LOCAL_HI(%a0)
        movel   LOCAL_LO(%a1),LOCAL_LO(%a0)
        rts
//
//      reg_dest --- write byte, word, or long data to Dn
//
//
// Input:
//      L_SCR1: Data 
//      d1:     data size and dest register number formatted as:
//
//      32              5    4     3     2     1     0
//       -----------------------------------------------
//       |        0        |    Size   |  Dest Reg #   |
//       -----------------------------------------------
//
//      Size is:
//              0 - Byte
//              1 - Word
//              2 - Long/Single
//
pregdst:
        .long   byte_d0
        .long   byte_d1
        .long   byte_d2
        .long   byte_d3
        .long   byte_d4
        .long   byte_d5
        .long   byte_d6
        .long   byte_d7
        .long   word_d0
        .long   word_d1
        .long   word_d2
        .long   word_d3
        .long   word_d4
        .long   word_d5
        .long   word_d6
        .long   word_d7
        .long   long_d0
        .long   long_d1
        .long   long_d2
        .long   long_d3
        .long   long_d4
        .long   long_d5
        .long   long_d6
        .long   long_d7

reg_dest:
        leal    pregdst,%a0
        movel   %a0@(%d1:l:4),%a0
        jmp     (%a0)

byte_d0:
        moveb   L_SCR1(%a6),USER_D0+3(%a6)
        rts
byte_d1:
        moveb   L_SCR1(%a6),USER_D1+3(%a6)
        rts
byte_d2:
        moveb   L_SCR1(%a6),%d2
        rts
byte_d3:
        moveb   L_SCR1(%a6),%d3
        rts
byte_d4:
        moveb   L_SCR1(%a6),%d4
        rts
byte_d5:
        moveb   L_SCR1(%a6),%d5
        rts
byte_d6:
        moveb   L_SCR1(%a6),%d6
        rts
byte_d7:
        moveb   L_SCR1(%a6),%d7
        rts
word_d0:
        movew   L_SCR1(%a6),USER_D0+2(%a6)
        rts
word_d1:
        movew   L_SCR1(%a6),USER_D1+2(%a6)
        rts
word_d2:
        movew   L_SCR1(%a6),%d2
        rts
word_d3:
        movew   L_SCR1(%a6),%d3
        rts
word_d4:
        movew   L_SCR1(%a6),%d4
        rts
word_d5:
        movew   L_SCR1(%a6),%d5
        rts
word_d6:
        movew   L_SCR1(%a6),%d6
        rts
word_d7:
        movew   L_SCR1(%a6),%d7
        rts
long_d0:
        movel   L_SCR1(%a6),USER_D0(%a6)
        rts
long_d1:
        movel   L_SCR1(%a6),USER_D1(%a6)
        rts
long_d2:
        movel   L_SCR1(%a6),%d2
        rts
long_d3:
        movel   L_SCR1(%a6),%d3
        rts
long_d4:
        movel   L_SCR1(%a6),%d4
        rts
long_d5:
        movel   L_SCR1(%a6),%d5
        rts
long_d6:
        movel   L_SCR1(%a6),%d6
        rts
long_d7:
        movel   L_SCR1(%a6),%d7
        rts
        |end