Subversion Repositories openrisc_me

/*
 *  Clock Tick Device Driver
 *
 *  This routine utilizes the Decrementer Register common to the PPC family.
 *
 *  The tick frequency is directly programmed to the configured number of
 *  microseconds per tick.
 *
 *  COPYRIGHT (c) 1989-1997.
 *  On-Line Applications Research Corporation (OAR).
 *  Copyright assigned to U.S. Government, 1994.
 *
 *  The license and distribution terms for this file may in
 *  the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  Modified to support the MPC750.
 *  Modifications Copyright (c) 1999 Eric Valette valette@crf.canon.fr
 *
 *  $Id: c_clock.c,v 1.2 2001-09-27 12:01:24 chris Exp $
 */
 
#include <rtems.h>
#include <rtems/libio.h>
#include <stdlib.h>                     /* for atexit() */
#include <assert.h>
#include <libcpu/cpu.h>
#include <libcpu/c_clock.h>
 
/*
 *  Clock ticks since initialization
 */
 
volatile rtems_unsigned32 Clock_driver_ticks;
 
/*
 *  This is the value programmed into the count down timer.
 */
 
rtems_unsigned32 Clock_Decrementer_value;
 
/*
 * These are set by clock driver during its init
 */
 
rtems_device_major_number rtems_clock_major = ~0;
rtems_device_minor_number rtems_clock_minor;
 
void clockOff(void* unused)
{
  /*
   * Nothing to do as we cannot disable all interrupts and
   * the decrementer interrupt enable is MSR_EE
   */
}
void clockOn(void* unused)
{
  PPC_Set_decrementer( Clock_Decrementer_value );
}
 
/*
 *  Clock_isr
 *
 *  This is the clock tick interrupt handler.
 *
 *  Input parameters:
 *    vector - vector number
 *
 *  Output parameters:  NONE
 *
 *  Return values:      NONE
 *
 */
void clockIsr()
{
  /*
   *  The driver has seen another tick.
   */
 
  PPC_Set_decrementer( Clock_Decrementer_value );
 
  Clock_driver_ticks += 1;
 
  /*
   *  Real Time Clock counter/timer is set to automatically reload.
   */
 
  rtems_clock_tick();
}
 
int clockIsOn(void* unused)
{
  unsigned32 msr_value;
 
  _CPU_MSR_GET( msr_value );
  if (msr_value & MSR_EE) return 1;
  return 0;
}
 
 
/*
 *  Clock_exit
 *
 *  This routine allows the clock driver to exit by masking the interrupt and
 *  disabling the clock's counter.
 *
 *  Input parameters:   NONE
 *
 *  Output parameters:  NONE
 *
 *  Return values:      NONE
 *
 */
 
void Clock_exit( void )
{
  (void) BSP_disconnect_clock_handler ();
}
 
/*
 *  Clock_initialize
 *
 *  This routine initializes the clock driver.
 *
 *  Input parameters:
 *    major - clock device major number
 *    minor - clock device minor number
 *    parg  - pointer to optional device driver arguments
 *
 *  Output parameters:  NONE
 *
 *  Return values:
 *    rtems_device_driver status code
 */
 
rtems_device_driver Clock_initialize(
  rtems_device_major_number major,
  rtems_device_minor_number minor,
  void *pargp
)
{
  Clock_Decrementer_value = (BSP_bus_frequency/BSP_time_base_divisor)*
                            (BSP_Configuration.microseconds_per_tick/1000);
 
  if (!BSP_connect_clock_handler ()) {
    printk("Unable to initialize system clock\n");
    rtems_fatal_error_occurred(1);
  }
  /* make major/minor avail to others such as shared memory driver */
 
  rtems_clock_major = major;
  rtems_clock_minor = minor;
 
  return RTEMS_SUCCESSFUL;
} /* Clock_initialize */
 
/*
 *  Clock_control
 *
 *  This routine is the clock device driver control entry point.
 *
 *  Input parameters:
 *    major - clock device major number
 *    minor - clock device minor number
 *    parg  - pointer to optional device driver arguments
 *
 *  Output parameters:  NONE
 *
 *  Return values:
 *    rtems_device_driver status code
 */
 
rtems_device_driver Clock_control(
  rtems_device_major_number major,
  rtems_device_minor_number minor,
  void *pargp
)
{
    rtems_libio_ioctl_args_t *args = pargp;
 
    if (args == 0)
        goto done;
 
    Clock_Decrementer_value = (BSP_bus_frequency/BSP_time_base_divisor)*
      (BSP_Configuration.microseconds_per_tick/1000);
 
    if      (args->command == rtems_build_name('I', 'S', 'R', ' '))
      clockIsr();
    else if (args->command == rtems_build_name('N', 'E', 'W', ' '))
    {
      if (!BSP_connect_clock_handler ()) {
	printk("Error installing clock interrupt handler!\n");
	rtems_fatal_error_occurred(1);
      }
    }
done:
    return RTEMS_SUCCESSFUL;
}