URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libcpu/] [powerpc/] [shared/] [cpu.h] - Rev 607
Go to most recent revision | Compare with Previous | Blame | View Log
/* * cpu.h * * This file contains some powerpc MSR and registers access definitions. * * It is a stripped down version of linux ppc processor.h file... * * Copyright (C) 1999 Eric Valette (valette@crf.canon.fr) * Canon Centre Recherche France. * * The license and distribution terms for this file may be * found in found in the file LICENSE in this distribution or at * http://www.OARcorp.com/rtems/license.html. * * $Id: cpu.h,v 1.2 2001-09-27 12:01:30 chris Exp $ */ #ifndef __ASM_PPC_PROCESSOR_H #define __ASM_PPC_PROCESSOR_H #include <bsp/residual.h> /* Bit encodings for Machine State Register (MSR) */ #define MSR_POW (1<<18) /* Enable Power Management */ #define MSR_TGPR (1<<17) /* TLB Update registers in use */ #define MSR_ILE (1<<16) /* Interrupt Little-Endian enable */ #define MSR_EE (1<<15) /* External Interrupt enable */ #define MSR_PR (1<<14) /* Supervisor/User privilege */ #define MSR_FP (1<<13) /* Floating Point enable */ #define MSR_ME (1<<12) /* Machine Check enable */ #define MSR_FE0 (1<<11) /* Floating Exception mode 0 */ #define MSR_SE (1<<10) /* Single Step */ #define MSR_BE (1<<9) /* Branch Trace */ #define MSR_FE1 (1<<8) /* Floating Exception mode 1 */ #define MSR_IP (1<<6) /* Exception prefix 0x000/0xFFF */ #define MSR_IR (1<<5) /* Instruction MMU enable */ #define MSR_DR (1<<4) /* Data MMU enable */ #define MSR_RI (1<<1) /* Recoverable Exception */ #define MSR_LE (1<<0) /* Little-Endian enable */ #define MSR_ MSR_ME|MSR_RI #define MSR_KERNEL MSR_|MSR_IR|MSR_DR #define MSR_USER MSR_KERNEL|MSR_PR|MSR_EE /* Bit encodings for Hardware Implementation Register (HID0) on PowerPC 603, 604, etc. processors (not 601). */ #define HID0_EMCP (1<<31) /* Enable Machine Check pin */ #define HID0_EBA (1<<29) /* Enable Bus Address Parity */ #define HID0_EBD (1<<28) /* Enable Bus Data Parity */ #define HID0_SBCLK (1<<27) #define HID0_EICE (1<<26) #define HID0_ECLK (1<<25) #define HID0_PAR (1<<24) #define HID0_DOZE (1<<23) #define HID0_NAP (1<<22) #define HID0_SLEEP (1<<21) #define HID0_DPM (1<<20) #define HID0_ICE (1<<15) /* Instruction Cache Enable */ #define HID0_DCE (1<<14) /* Data Cache Enable */ #define HID0_ILOCK (1<<13) /* Instruction Cache Lock */ #define HID0_DLOCK (1<<12) /* Data Cache Lock */ #define HID0_ICFI (1<<11) /* Instruction Cache Flash Invalidate */ #define HID0_DCI (1<<10) /* Data Cache Invalidate */ #define HID0_SIED (1<<7) /* Serial Instruction Execution [Disable] */ #define HID0_BHTE (1<<2) /* Branch History Table Enable */ #define HID0_BTCD (1<<1) /* Branch target cache disable */ /* fpscr settings */ #define FPSCR_FX (1<<31) #define FPSCR_FEX (1<<30) #define _MACH_prep 1 #define _MACH_Pmac 2 /* pmac or pmac clone (non-chrp) */ #define _MACH_chrp 4 /* chrp machine */ #define _MACH_mbx 8 /* Motorola MBX board */ #define _MACH_apus 16 /* amiga with phase5 powerup */ #define _MACH_fads 32 /* Motorola FADS board */ /* see residual.h for these */ #define _PREP_Motorola 0x01 /* motorola prep */ #define _PREP_Firm 0x02 /* firmworks prep */ #define _PREP_IBM 0x00 /* ibm prep */ #define _PREP_Bull 0x03 /* bull prep */ /* these are arbitrary */ #define _CHRP_Motorola 0x04 /* motorola chrp, the cobra */ #define _CHRP_IBM 0x05 /* IBM chrp, the longtrail and longtrail 2 */ #define _GLOBAL(n)\ .globl n;\ n: #define TBRU 269 /* Time base Upper/Lower (Reading) */ #define TBRL 268 #define TBWU 284 /* Time base Upper/Lower (Writing) */ #define TBWL 285 #define XER 1 #define LR 8 #define CTR 9 #define HID0 1008 /* Hardware Implementation */ #define PVR 287 /* Processor Version */ #define IBAT0U 528 /* Instruction BAT #0 Upper/Lower */ #define IBAT0L 529 #define IBAT1U 530 /* Instruction BAT #1 Upper/Lower */ #define IBAT1L 531 #define IBAT2U 532 /* Instruction BAT #2 Upper/Lower */ #define IBAT2L 533 #define IBAT3U 534 /* Instruction BAT #3 Upper/Lower */ #define IBAT3L 535 #define DBAT0U 536 /* Data BAT #0 Upper/Lower */ #define DBAT0L 537 #define DBAT1U 538 /* Data BAT #1 Upper/Lower */ #define DBAT1L 539 #define DBAT2U 540 /* Data BAT #2 Upper/Lower */ #define DBAT2L 541 #define DBAT3U 542 /* Data BAT #3 Upper/Lower */ #define DBAT3L 543 #define DMISS 976 /* TLB Lookup/Refresh registers */ #define DCMP 977 #define HASH1 978 #define HASH2 979 #define IMISS 980 #define ICMP 981 #define RPA 982 #define SDR1 25 /* MMU hash base register */ #define DAR 19 /* Data Address Register */ #define SPR0 272 /* Supervisor Private Registers */ #define SPRG0 272 #define SPR1 273 #define SPRG1 273 #define SPR2 274 #define SPRG2 274 #define SPR3 275 #define SPRG3 275 #define DSISR 18 #define SRR0 26 /* Saved Registers (exception) */ #define SRR1 27 #define IABR 1010 /* Instruction Address Breakpoint */ #define DEC 22 /* Decrementer */ #define EAR 282 /* External Address Register */ #define L2CR 1017 /* PPC 750 L2 control register */ #define THRM1 1020 #define THRM2 1021 #define THRM3 1022 #define THRM1_TIN 0x1 #define THRM1_TIV 0x2 #define THRM1_THRES (0x7f<<2) #define THRM1_TID (1<<29) #define THRM1_TIE (1<<30) #define THRM1_V (1<<31) #define THRM3_E (1<<31) /* Segment Registers */ #define SR0 0 #define SR1 1 #define SR2 2 #define SR3 3 #define SR4 4 #define SR5 5 #define SR6 6 #define SR7 7 #define SR8 8 #define SR9 9 #define SR10 10 #define SR11 11 #define SR12 12 #define SR13 13 #define SR14 14 #define SR15 15 #ifndef ASM typedef enum { PPC_601 = 0x1, PPC_603 = 0x3, PPC_604 = 0x4, PPC_603e = 0x6, PPC_603ev = 0x7, PPC_750 = 0x8, PPC_604e = 0x9, PPC_604r = 0xA, PPC_620 = 0x16, PPC_860 = 0x50, PPC_821 = PPC_860, PPC_UNKNOWN = 0xff } ppc_cpu_id_t; typedef unsigned short ppc_cpu_revision_t; extern ppc_cpu_id_t get_ppc_cpu_type(); extern ppc_cpu_id_t current_ppc_cpu; extern ppc_cpu_revision_t get_ppc_cpu_revision(); extern ppc_cpu_revision_t current_ppc_revision; /* * Routines to access the time base register */ static inline unsigned long long PPC_Get_timebase_register( void ) { unsigned long tbr_low; unsigned long tbr_high; unsigned long tbr_high_old; unsigned long long tbr; do { asm volatile( "mftbu %0" : "=r" (tbr_high_old)); asm volatile( "mftb %0" : "=r" (tbr_low)); asm volatile( "mftbu %0" : "=r" (tbr_high)); } while ( tbr_high_old != tbr_high ); tbr = tbr_high; tbr <<= 32; tbr |= tbr_low; return tbr; } static inline void PPC_Set_timebase_register (unsigned long long tbr) { unsigned long tbr_low; unsigned long tbr_high; tbr_low = (tbr & 0xffffffff) ; tbr_high = (tbr >> 32) & 0xffffffff; asm volatile( "mtspr 284, %0" : : "r" (tbr_low)); asm volatile( "mtspr 285, %0" : : "r" (tbr_high)); } #endif #define _CPU_MSR_GET( _msr_value ) \ do { \ _msr_value = 0; \ asm volatile ("mfmsr %0" : "=&r" ((_msr_value)) : "0" ((_msr_value))); \ } while (0) #define _CPU_MSR_SET( _msr_value ) \ { asm volatile ("mtmsr %0" : "=&r" ((_msr_value)) : "0" ((_msr_value))); } #define _CPU_ISR_Disable( _isr_cookie ) \ { register unsigned int _disable_mask = MSR_EE; \ _isr_cookie = 0; \ asm volatile ( \ "mfmsr %0; andc %1,%0,%1; mtmsr %1" : \ "=&r" ((_isr_cookie)), "=&r" ((_disable_mask)) : \ "0" ((_isr_cookie)), "1" ((_disable_mask)) \ ); \ } #define _CPU_Data_Cache_Block_Flush( _address ) \ do { register void *__address = (_address); \ register unsigned32 _zero = 0; \ asm volatile ( "dcbf %0,%1" : \ "=r" (_zero), "=r" (__address) : \ "0" (_zero), "1" (__address) \ ); \ } while (0) /* * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). * This indicates the end of an RTEMS critical section. The parameter * _isr_cookie is not modified. */ #define _CPU_ISR_Enable( _isr_cookie ) \ { \ asm volatile ( "mtmsr %0" : \ "=r" ((_isr_cookie)) : \ "0" ((_isr_cookie))); \ } /* * This temporarily restores the interrupt to _isr_cookie before immediately * disabling them again. This is used to divide long RTEMS critical * sections into two or more parts. The parameter _isr_cookie is not * modified. * * NOTE: The version being used is not very optimized but it does * not trip a problem in gcc where the disable mask does not * get loaded. Check this for future (post 10/97 gcc versions. */ #define _CPU_ISR_Flash( _isr_cookie ) \ { register unsigned int _disable_mask = MSR_EE; \ asm volatile ( \ "mtmsr %0; andc %1,%0,%1; mtmsr %1" : \ "=r" ((_isr_cookie)), "=r" ((_disable_mask)) : \ "0" ((_isr_cookie)), "1" ((_disable_mask)) \ ); \ } /* end of ISR handler macros */ /* * Simple spin delay in microsecond units for device drivers. * This is very dependent on the clock speed of the target. */ #define CPU_Get_timebase_low( _value ) \ asm volatile( "mftb %0" : "=r" (_value) ) #define delay( _microseconds ) \ do { \ unsigned32 start, ticks, now; \ CPU_Get_timebase_low( start ) ; \ ticks = (_microseconds) * rtems_cpu_configuration_get_clicks_per_usec(); \ do \ CPU_Get_timebase_low( now ) ; \ while (now - start < ticks); \ } while (0) #define delay_in_bus_cycles( _cycles ) \ do { \ unsigned32 start, now; \ CPU_Get_timebase_low( start ); \ do \ CPU_Get_timebase_low( now ); \ while (now - start < (_cycles)); \ } while (0) #define PPC_Set_decrementer( _clicks ) \ do { \ asm volatile( "mtdec %0" : "=r" ((_clicks)) : "r" ((_clicks)) ); \ } while (0) #endif /* __ASM_PPC_PROCESSOR_H */
Go to most recent revision | Compare with Previous | Blame | View Log