URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [libnetworking/] [pppd/] [chat.c] - Rev 857
Go to most recent revision | Compare with Previous | Blame | View Log
/* * Chat -- a program for automatic session establishment (i.e. dial * the phone and log in). * * Standard termination codes: * 0 - successful completion of the script * 1 - invalid argument, expect string too large, etc. * 2 - error on an I/O operation or fatal error condition. * 3 - timeout waiting for a simple string. * 4 - the first string declared as "ABORT" * 5 - the second string declared as "ABORT" * 6 - ... and so on for successive ABORT strings. * * This software is in the public domain. * * ----------------- * added -T and -U option and \T and \U substitution to pass a phone * number into chat script. Two are needed for some ISDN TA applications. * Keith Dart <kdart@cisco.com> * * * Added SAY keyword to send output to stderr. * This allows to turn ECHO OFF and to output specific, user selected, * text to give progress messages. This best works when stderr * exists (i.e.: pppd in nodetach mode). * * Added HANGUP directives to allow for us to be called * back. When HANGUP is set to NO, chat will not hangup at HUP signal. * We rely on timeouts in that case. * * Added CLR_ABORT to clear previously set ABORT string. This has been * dictated by the HANGUP above as "NO CARRIER" (for example) must be * an ABORT condition until we know the other host is going to close * the connection for call back. As soon as we have completed the * first stage of the call back sequence, "NO CARRIER" is a valid, non * fatal string. As soon as we got called back (probably get "CONNECT"), * we should re-arm the ABORT "NO CARRIER". Hence the CLR_ABORT command. * Note that CLR_ABORT packs the abort_strings[] array so that we do not * have unused entries not being reclaimed. * * In the same vein as above, added CLR_REPORT keyword. * * Allow for comments. Line starting with '#' are comments and are * ignored. If a '#' is to be expected as the first character, the * expect string must be quoted. * * * Francis Demierre <Francis@SwissMail.Com> * Thu May 15 17:15:40 MET DST 1997 * * * Added -r "report file" switch & REPORT keyword. * Robert Geer <bgeer@xmission.com> * * Added -s "use stderr" and -S "don't use syslog" switches. * June 18, 1997 * Karl O. Pinc <kop@meme.com> * * * Added -e "echo" switch & ECHO keyword * Dick Streefland <dicks@tasking.nl> * * * Considerable updates and modifications by * Al Longyear <longyear@pobox.com> * Paul Mackerras <paulus@cs.anu.edu.au> * * * The original author is: * * Karl Fox <karl@MorningStar.Com> * Morning Star Technologies, Inc. * 1760 Zollinger Road * Columbus, OH 43221 * (614)451-1883 * * */ #ifndef lint /* static char rcsid[] = ""; */ #endif #include <stdio.h> #include <ctype.h> #include <time.h> #include <fcntl.h> #include <signal.h> #include <errno.h> #include <string.h> #include <stdlib.h> #include <unistd.h> #include <sys/types.h> #include <sys/stat.h> #include <syslog.h> #undef TERMIOS #define TERMIOS #include <termios.h> #define STR_LEN 1024 char temp2[STR_LEN]; #ifndef SIGTYPE #define SIGTYPE void #endif #undef __P #undef __V #ifdef __STDC__ #include <stdarg.h> #define __V(x) x #define __P(x) x #else #include <varargs.h> #define __V(x) (va_alist) va_dcl #define __P(x) () #define const #endif #ifndef O_NONBLOCK #define O_NONBLOCK O_NDELAY #endif /*************** Micro getopt() *********************************************/ #define OPTION(c,v) (_O&2&&**v?*(*v)++:!c||_O&4?0:(!(_O&1)&& \ (--c,++v),_O=4,c&&**v=='-'&&v[0][1]?*++*v=='-'\ &&!v[0][1]?(--c,++v,0):(_O=2,*(*v)++):0)) #define OPTARG(c,v) (_O&2?**v||(++v,--c)?(_O=1,--c,*v++): \ (_O=4,(char*)0):(char*)0) #define OPTONLYARG(c,v) (_O&2&&**v?(_O=1,--c,*v++):(char*)0) #define ARG(c,v) (c?(--c,*v++):(char*)0) #if 0 static int _O = 0; /* Internal state */ #endif /*************** Micro getopt() *********************************************/ char *program_name; #define MAX_ABORTS 5 #define MAX_REPORTS 5 #define DEFAULT_CHAT_TIMEOUT 45 #define fcntl(a, b,c ) 0 #define MAX_TIMEOUTS 10 int echo = 0; int verbose = 0; int to_log = 1; int to_stderr = 0; int Verbose = 0; int quiet = 0; int report = 0; int exit_code = 0; static int speed=0; char *report_file = (char *) 0; char *chat_file = (char *) 0; char *phone_num = (char *) 0; char *phone_num2 = (char *) 0; int chat_timeout = DEFAULT_CHAT_TIMEOUT; static int timeout = DEFAULT_CHAT_TIMEOUT; int have_tty_parameters = 0; #ifdef TERMIOS #define term_parms struct termios #define get_term_param(param) tcgetattr(modem_fd, param) #define set_term_param(param) tcsetattr(modem_fd, TCSANOW, param) struct termios saved_tty_parameters; #endif char *abort_string[MAX_ABORTS]={"BUSY","NO DIALTONE","NO CARRIER","NO ASWER","RINGING\r\n\r\nRINGING"}; char *fail_reason = (char *)0, fail_buffer[50]; int n_aborts = MAX_ABORTS, abort_next = 0, timeout_next = 0, echo_next = 0; int clear_abort_next = 0; char *report_string[MAX_REPORTS] ; char report_buffer[50] ; int n_reports = 0, report_next = 0, report_gathering = 0 ; int clear_report_next = 0; int say_next = 0, hup_next = 0; void *dup_mem __P((void *b, size_t c)); void *copy_of __P((char *s)); /* SIGTYPE sigalrm __P((int signo)); SIGTYPE sigint __P((int signo)); SIGTYPE sigterm __P((int signo)); SIGTYPE sighup __P((int signo)); */ void unalarm __P((void)); void init __P((void)); void set_tty_parameters __P((void)); void echo_stderr __P((int)); void break_sequence __P((void)); void terminate __P((int status)); void do_file __P((char *chat_file)); int get_string __P((register char *string)); int put_string __P((register char *s)); int write_char __P((int c)); int put_char __P((int c)); int get_char __P((void)); void chat_send __P((register char *s)); char *character __P((int c)); void chat_expect __P((register char *s)); char *clean __P((register char *s, int sending)); void break_sequence __P((void)); void terminate __P((int status)); void pack_array __P((char **array, int end)); char *expect_strtok __P((char *, char *)); int vfmtmsg __P((char *, int, const char *, va_list)); /* vsprintf++ */ #if 0 int usleep( long usec ); /* returns 0 if ok, else -1 */ #endif extern int input_fd,output_fd; int main __P((int, char *[])); void *dup_mem(b, c) void *b; size_t c; { void *ans = malloc (c); if (!ans) return NULL; memcpy (ans, b, c); return ans; } void *copy_of (s) char *s; { return dup_mem (s, strlen (s) + 1); } /* * chat [ -v ] [-T number] [-U number] [ -t timeout ] [ -f chat-file ] \ * [ -r report-file ] \ * [...[[expect[-say[-expect...]] say expect[-say[-expect]] ...]]] * * Perform a UUCP-dialer-like chat script on stdin and stdout. */ char *getnextcommand(char **string) { char *buf=*string,*res; res=strchr(buf,'@'); if (res==NULL) return NULL; *res='\0'; *string=res+1; return buf; } extern int modem_fd; int chatmain(argv) char *argv; { char *arg; int i; char *t; exit_code=0; speed=0; /* * Default the report file to the stderr location */ /* if (report_fp == NULL) report_fp = stderr; */ init(); while ( (arg = getnextcommand(&argv)) != NULL) { chat_expect(arg); if (exit_code>0) break; t=temp2; while(*t) { if (strncmp("CARRIER",t,7)==0) {/* parse speed information */ i=0; while(!isdigit(t[i])) i++; t=&t[i]; i=0; while(isdigit(t[i])) i++; t[i]=0; sscanf(t,"%d",&speed); break; } t++; } if ((arg = getnextcommand(&argv)) != NULL) chat_send(arg); if (exit_code>0) break; } if (exit_code) return exit_code; return -speed; } /* * Print an error message and terminate. */ void init() { set_tty_parameters(); speed=0; } void set_tty_parameters() { term_parms t; if (get_term_param (&t) < 0) syslog(LOG_NOTICE,"Can't get terminal parameters:") ; saved_tty_parameters = t; have_tty_parameters = 1; t.c_iflag |= IGNBRK | ISTRIP | IGNPAR; t.c_oflag = 0; t.c_lflag = 0; t.c_cc[VERASE] = t.c_cc[VKILL] = 0; t.c_cc[VMIN] = 0; t.c_cc[VTIME] = 1; if (set_term_param (&t) < 0) syslog(LOG_NOTICE,"Can't set terminal parameters:") ; } void break_sequence() { /* tcsendbreak (0, 0);*/ } /*void terminate(status) int status; { echo_stderr(-1); if (have_tty_parameters) { if (set_term_param (&saved_tty_parameters) < 0) fatal(2, "Can't restore terminal parameters: %m"); } } */ /* * 'Clean up' this string. */ char *clean(s, sending) register char *s; int sending; /* set to 1 when sending (putting) this string. */ { char temp[STR_LEN], cur_chr; register char *s1, *phchar; int add_return = sending; #define isoctal(chr) (((chr) >= '0') && ((chr) <= '7')) s1 = temp; while (*s) { cur_chr = *s++; if (cur_chr == '^') { cur_chr = *s++; if (cur_chr == '\0') { *s1++ = '^'; break; } cur_chr &= 0x1F; if (cur_chr != 0) { *s1++ = cur_chr; } continue; } if (cur_chr != '\\') { *s1++ = cur_chr; continue; } cur_chr = *s++; if (cur_chr == '\0') { if (sending) { *s1++ = '\\'; *s1++ = '\\'; } break; } switch (cur_chr) { case 'b': *s1++ = '\b'; break; case 'c': if (sending && *s == '\0') add_return = 0; else *s1++ = cur_chr; break; case '\\': case 'K': case 'p': case 'd': if (sending) *s1++ = '\\'; *s1++ = cur_chr; break; case 'T': if (sending && phone_num) { for ( phchar = phone_num; *phchar != '\0'; phchar++) *s1++ = *phchar; } else { *s1++ = '\\'; *s1++ = 'T'; } break; case 'U': if (sending && phone_num2) { for ( phchar = phone_num2; *phchar != '\0'; phchar++) *s1++ = *phchar; } else { *s1++ = '\\'; *s1++ = 'U'; } break; case 'q': quiet = 1; break; case 'r': *s1++ = '\r'; break; case 'n': *s1++ = '\n'; break; case 's': *s1++ = ' '; break; case 't': *s1++ = '\t'; break; case 'N': if (sending) { *s1++ = '\\'; *s1++ = '\0'; } else *s1++ = 'N'; break; default: if (isoctal (cur_chr)) { cur_chr &= 0x07; if (isoctal (*s)) { cur_chr <<= 3; cur_chr |= *s++ - '0'; if (isoctal (*s)) { cur_chr <<= 3; cur_chr |= *s++ - '0'; } } if (cur_chr != 0 || sending) { if (sending && (cur_chr == '\\' || cur_chr == 0)) *s1++ = '\\'; *s1++ = cur_chr; } break; } if (sending) *s1++ = '\\'; *s1++ = cur_chr; break; } } if (add_return) *s1++ = '\r'; *s1++ = '\0'; /* guarantee closure */ *s1++ = '\0'; /* terminate the string */ return dup_mem (temp, (size_t) (s1 - temp)); /* may have embedded nuls */ } /* * A modified version of 'strtok'. This version skips \ sequences. */ char *expect_strtok (s, term) char *s, *term; { static char *str = ""; int escape_flag = 0; char *result; /* * If a string was specified then do initial processing. */ if (s) str = s; /* * If this is the escape flag then reset it and ignore the character. */ if (*str) result = str; else result = (char *) 0; while (*str) { if (escape_flag) { escape_flag = 0; ++str; continue; } if (*str == '\\') { ++str; escape_flag = 1; continue; } /* * If this is not in the termination string, continue. */ if (strchr (term, *str) == (char *) 0) { ++str; continue; } /* * This is the terminator. Mark the end of the string and stop. */ *str++ = '\0'; break; } return (result); } /* * Process the expect string */ void chat_expect (s) char *s; { char *expect; char *reply; if (strcmp(s, "HANGUP") == 0) { ++hup_next; return ; } if (strcmp(s, "ABORT") == 0) { ++abort_next; return ; } if (strcmp(s, "CLR_ABORT") == 0) { ++clear_abort_next; return ; } if (strcmp(s, "REPORT") == 0) { ++report_next; return ; } if (strcmp(s, "CLR_REPORT") == 0) { ++clear_report_next; return ; } if (strcmp(s, "TIMEOUT") == 0) { ++timeout_next; return ; } if (strcmp(s, "ECHO") == 0) { ++echo_next; return ; } if (strcmp(s, "SAY") == 0) { ++say_next; return ; } /* * Fetch the expect and reply string. */ for (;;) { expect = expect_strtok (s, "-"); s = (char *)0 ; if (expect == (char *) 0) return ; reply = expect_strtok (s, "-"); /* * Handle the expect string. If successful then exit. */ if (get_string (expect)) return; /* * If there is a sub-reply string then send it. Otherwise any condition * is terminal. */ if (reply == (char *) 0 || exit_code != 3) break; chat_send (reply); } /* * The expectation did not occur. This is terminal. */ return ; } /* * process the reply string */ void chat_send (s) register char *s; { if (say_next) { say_next = 0; s = clean(s,0); write(modem_fd, s, strlen(s)); free(s); return; } if (hup_next) { hup_next = 0; } if (echo_next) { echo_next = 0; echo = (strcmp(s, "ON") == 0); return; } if (abort_next) { /* char *s1; */ ; return; } /* if (report_next) { char *s1; report_next = 0; if (n_reports >= MAX_REPORTS) { exit_code=2; return; } s1 = clean(s, 0); if (strlen(s1) > strlen(s) || strlen(s1) > sizeof fail_buffer - 1) { exit_code=1; return; } report_string[n_reports++] = s1; return; } */ /* if (clear_report_next) { char *s1; int i; int old_max; int pack = 0; clear_report_next = 0; s1 = clean(s, 0); if (strlen(s1) > strlen(s) || strlen(s1) > sizeof fail_buffer - 1) { exit_code=1; return; } old_max = n_reports; for (i=0; i < n_reports; i++) { if ( strcmp(s1,report_string[i]) == 0 ) { free(report_string[i]); report_string[i] = NULL; pack++; n_reports--; } } free(s1); if (pack) pack_array(report_string,old_max); return; } */ if (timeout_next) { timeout=atoi(s); timeout_next = 0; chat_timeout = atoi(s); if (chat_timeout <= 0) chat_timeout = DEFAULT_CHAT_TIMEOUT; return; } if (strcmp(s, "EOT") == 0) s = "^D\\c"; else if (strcmp(s, "BREAK") == 0) s = "\\K\\c"; if (!put_string(s)) { exit_code=1; return; } } int get_char() { int status; char c; int tries=MAX_TIMEOUTS; while(tries) { status = read(modem_fd, &c, 1); switch (status) { case 1: return ((int)c & 0x7F); default: tries--; } } return -1; } int put_char(c) int c; { int status; char ch = c; /* inter-character typing delay (?) */ status = write(modem_fd, &ch, 1); switch (status) { case 1: return (0); default: } return 0; } int write_char (c) int c; { if (put_char(c) < 0) { return (0); } return (1); } int put_string (s) register char *s; { quiet = 0; s = clean(s, 1); while (*s) { register char c = *s++; if (c != '\\') { if (!write_char (c)) return 0; continue; } c = *s++; switch (c) { case 'd': sleep(1); break; case 'K': break_sequence(); break; case 'p': usleep(10000); /* 1/100th of a second (arg is microseconds) */ break; default: if (!write_char (c)) return 0; break; } } /* alarm(0);*/ return (1); } /* * Echo a character to stderr. * When called with -1, a '\n' character is generated when * the cursor is not at the beginning of a line. */ void echo_stderr(n) int n; { /* static int need_lf; char *s; switch (n) { case '\r': break; case -1: if (need_lf == 0) break; case '\n': write(2, "\n", 1); need_lf = 0; break; default: s = character(n); write(2, s, strlen(s)); need_lf = 1; break; }*/ } /* * 'Wait for' this string to appear on this file descriptor. */ int get_string(string) register char *string; { int c, len, minlen; register char *s = temp2, *end = s + STR_LEN; char *logged = temp2; struct termios tios; tcgetattr(modem_fd, &tios); tios.c_cc[VMIN] = 0; tios.c_cc[VTIME] = timeout*10/MAX_TIMEOUTS; tcsetattr(modem_fd, TCSANOW, &tios); string = clean(string, 0); len = strlen(string); minlen = (len > sizeof(fail_buffer)? len: sizeof(fail_buffer)) - 1; if (len > STR_LEN) { exit_code = 1; return 0; } if (len == 0) { return (1); } while ( (c = get_char()) >= 0) { int n, abort_len; *s++ = c; *s=0; if (s - temp2 >= len && c == string[len - 1] && strncmp(s - len, string, len) == 0) { return (1); } for (n = 0; n < n_aborts; ++n) { if (s - temp2 >= (abort_len = strlen(abort_string[n])) && strncmp(s - abort_len, abort_string[n], abort_len) == 0) { exit_code = n + 4; strcpy(fail_reason = fail_buffer, abort_string[n]); return (0); } } if (s >= end) { if (logged < s - minlen) { logged = s; } s -= minlen; memmove(temp2, s, minlen); logged = temp2 + (logged - s); s = temp2 + minlen; } } exit_code = 3; return (0); } /* * Gross kludge to handle Solaris versions >= 2.6 having usleep. */ /* usleep -- support routine for 4.2BSD system call emulations last edit: 29-Oct-1984 D A Gwyn */ #if 0 int usleep( usec ) /* returns 0 if ok, else -1 */ long usec; /* delay in microseconds */ { rtems_status_code status; rtems_interval ticks_per_second; rtems_interval ticks; status = rtems_clock_get( RTEMS_CLOCK_GET_TICKS_PER_SECOND, &ticks_per_second); ticks = (usec * (ticks_per_second/1000))/1000; status = rtems_task_wake_after( ticks ); return 0; } #endif void pack_array (array, end) char **array; /* The address of the array of string pointers */ int end; /* The index of the next free entry before CLR_ */ { int i, j; for (i = 0; i < end; i++) { if (array[i] == NULL) { for (j = i+1; j < end; ++j) if (array[j] != NULL) array[i++] = array[j]; for (; i < end; ++i) array[i] = NULL; break; } } } /* * vfmtmsg - format a message into a buffer. Like vsprintf except we * also specify the length of the output buffer, and we handle the * %m (error message) format. * Doesn't do floating-point formats. * Returns the number of chars put into buf. */ #define OUTCHAR(c) (buflen > 0? (--buflen, *buf++ = (c)): 0)
Go to most recent revision | Compare with Previous | Blame | View Log