Subversion Repositories openrisc_me

%/*
% * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
% * unrestricted use provided that this legend is included on all tape
% * media and as a part of the software program in whole or part.  Users
% * may copy or modify Sun RPC without charge, but are not authorized
% * to license or distribute it to anyone else except as part of a product or
% * program developed by the user.
% *
% * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
% * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
% * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
% *
% * Sun RPC is provided with no support and without any obligation on the
% * part of Sun Microsystems, Inc. to assist in its use, correction,
% * modification or enhancement.
% *
% * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
% * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
% * OR ANY PART THEREOF.
% *
% * In no event will Sun Microsystems, Inc. be liable for any lost revenue
% * or profits or other special, indirect and consequential damages, even if
% * Sun has been advised of the possibility of such damages.
% *
% * Sun Microsystems, Inc.
% * 2550 Garcia Avenue
% * Mountain View, California  94043
% */
%/*
% * Copyright (c) 1984,1989 by Sun Microsystems, Inc.
% */

%/* from pmap_prot.x */

#ifdef RPC_HDR
%
%#pragma ident  "@(#)pmap_prot.x        1.6     94/04/29 SMI"
%
%#ifndef _KERNEL
%
#endif

/*
 * Port Mapper Protocol Specification (in RPC Language)
 * derived from RFC 1057
 */

%/*
% * Protocol for the local binder service, or pmap.
% *
% * Copyright (C) 1984, Sun Microsystems, Inc.
% *
% * The following procedures are supported by the protocol:
% *
% * PMAPPROC_NULL() returns ()
% *     takes nothing, returns nothing
% *
% * PMAPPROC_SET(struct pmap) returns (bool_t)
% *     TRUE is success, FALSE is failure.  Registers the tuple
% *     [prog, vers, prot, port].
% *
% * PMAPPROC_UNSET(struct pmap) returns (bool_t)
% *     TRUE is success, FALSE is failure.  Un-registers pair
% *     [prog, vers].  prot and port are ignored.
% *
% * PMAPPROC_GETPORT(struct pmap) returns (long unsigned).
% *     0 is failure.  Otherwise returns the port number where the pair
% *     [prog, vers] is registered.  It may lie!
% *
% * PMAPPROC_DUMP() RETURNS (struct pmaplist_ptr)
% *
% * PMAPPROC_CALLIT(unsigned, unsigned, unsigned, string<>)
% *     RETURNS (port, string<>);
% * usage: encapsulatedresults = PMAPPROC_CALLIT(prog, vers, proc,
% *                                             encapsulatedargs);
% *     Calls the procedure on the local machine.  If it is not registered,
% *     this procedure is quite; ie it does not return error information!!!
% *     This procedure only is supported on rpc/udp and calls via
% *     rpc/udp.  This routine only passes null authentication parameters.
% *     This file has no interface to xdr routines for PMAPPROC_CALLIT.
% *
% * The service supports remote procedure calls on udp/ip or tcp/ip socket 111.
% */
%
const PMAPPORT = 111;   /* portmapper port number */
%
%
%/*
% * A mapping of (program, version, protocol) to port number
% */

struct pmap {
        unsigned long pm_prog;
        unsigned long pm_vers;
        unsigned long pm_prot;
        unsigned long pm_port;
};
#ifdef RPC_HDR
%
%typedef pmap PMAP;
%
#endif
%
%/*
% * Supported values for the "prot" field
% */
%
const PMAP_IPPROTO_TCP = 6;     /* protocol number for TCP/IP */
const PMAP_IPPROTO_UDP = 17;    /* protocol number for UDP/IP */
%
%
%/*
% * A list of mappings
% *
% * Below are two definitions for the pmaplist structure.  This is done because
% * xdr_pmaplist() is specified to take a struct pmaplist **, rather than a
% * struct pmaplist * that rpcgen would produce.  One version of the pmaplist
% * structure (actually called pm__list) is used with rpcgen, and the other is
% * defined only in the header file for compatibility with the specified
% * interface.
% */

struct pm__list {
        pmap pml_map;
        struct pm__list *pml_next;
};

typedef pm__list *pmaplist_ptr;         /* results of PMAPPROC_DUMP */

#ifdef RPC_HDR
%
%typedef struct pm__list pmaplist;
%typedef struct pm__list PMAPLIST;
%
%#ifndef __cplusplus
%struct pmaplist {
%       PMAP pml_map;
%       struct pmaplist *pml_next;
%};
%#endif
%
%#ifdef __cplusplus
%extern "C" {
%#endif
%#ifdef __STDC__
%extern  bool_t xdr_pmaplist(XDR *, pmaplist**);
%#else /* K&R C */
%bool_t xdr_pmaplist();
%#endif
%#ifdef __cplusplus
%}
%#endif
%
#endif

%
%/*
% * Arguments to callit
% */

struct rmtcallargs {
        unsigned long prog;
        unsigned long vers;
        unsigned long proc;
        opaque args<>;
};
#ifdef RPC_HDR
%
%/*
% * Client-side only representation of rmtcallargs structure.
% *
% * The routine that XDRs the rmtcallargs structure must deal with the
% * opaque arguments in the "args" structure.  xdr_rmtcall_args() needs to be
% * passed the XDR routine that knows the args' structure.  This routine
% * doesn't need to go over-the-wire (and it wouldn't make sense anyway) since
% * the application being called knows the args structure already.  So we use a
% * different "XDR" structure on the client side, p_rmtcallargs, which includes
% * the args' XDR routine.
% */
%struct p_rmtcallargs {
%       u_long prog;
%       u_long vers;
%       u_long proc;
%       struct {
%               u_int args_len;
%               char *args_val;
%       } args;
%       xdrproc_t       xdr_args;       /* encodes args */
%};
%
#endif  /* def RPC_HDR */
%
%
%/*
% * Results of callit
% */

struct rmtcallres {
        unsigned long port;
        opaque res<>;
};
#ifdef RPC_HDR
%
%/*
% * Client-side only representation of rmtcallres structure.
% */
%struct p_rmtcallres {
%       u_long port;
%       struct {
%               u_int res_len;
%               char *res_val;
%       } res;
%       xdrproc_t       xdr_res;        /* decodes res */
%};
%
#endif  /* def RPC_HDR */

/*
 * Port mapper procedures
 */

program PMAPPROG {
   version PMAPVERS {
        void
        PMAPPROC_NULL(void)     = 0;

        bool
        PMAPPROC_SET(pmap)      = 1;

        bool
        PMAPPROC_UNSET(pmap)    = 2;

        unsigned long
        PMAPPROC_GETPORT(pmap)  = 3;

        pmaplist_ptr
        PMAPPROC_DUMP(void)     = 4;

        rmtcallres
        PMAPPROC_CALLIT(rmtcallargs)  = 5;
   } = 2;
} = 100000;
%
#ifdef RPC_HDR
%#define PMAPVERS_PROTO         ((u_long)2)
%#define PMAPVERS_ORIG          ((u_long)1)
%
%#else          /* ndef _KERNEL */
%
%#include <rpc/pmap_rmt.h>
%
%#ifdef __cplusplus
%extern "C" {
%#endif
%
%#define        PMAPPORT 111
%
%struct pmap {
%       long unsigned pm_prog;
%       long unsigned pm_vers;
%       long unsigned pm_prot;
%       long unsigned pm_port;
%};
%typedef struct pmap PMAP;
%#ifdef __STDC__
%extern bool_t xdr_pmap (XDR *, struct pmap *);
%#else
%extern bool_t xdr_pmap ();
%#endif
%
%struct pmaplist {
%       struct pmap pml_map;
%       struct pmaplist *pml_next;
%};
%typedef struct pmaplist PMAPLIST;
%typedef struct pmaplist *pmaplist_ptr;
%
%
%#ifdef __cplusplus
%}
%#endif
%
%#endif         /* ndef _KERNEL */
#endif