URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [rtems/] [make/] [custom/] [erc32.cfg] - Rev 709
Go to most recent revision | Compare with Previous | Blame | View Log
#
# Config file for the European Space Agency ERC32
# a V7 SPARC processor derived from the Cypress 601/602 set.
#
# $Id: erc32.cfg,v 1.2 2001-09-27 12:02:52 chris Exp $
#
include $(RTEMS_ROOT)/make/custom/default.cfg
RTEMS_CPU=sparc
RTEMS_CPU_MODEL=erc32
# This is the actual bsp directory used during the build process.
RTEMS_BSP_FAMILY=erc32
# The -mflat avoids the use of save/restore instructions. It has
# a negative impact on the performance of RTEMS and should not be used.
ifeq ($(RTEMS_USE_GCC272),yes)
# -mno-v8 says not to use v8 level instructions. i.e. use v7 only
CPU_CFLAGS = -mno-v8 -mcypress
else
# -mcpu=cypress says to optimize for a Cypress 60x chipset
CPU_CFLAGS = -mcpu=cypress
endif
# optimize flag: typically -0, could use -O4 or -fast
# -O4 is ok for RTEMS
CFLAGS_OPTIMIZE_V=-O4
# This makes the target dependent options file
# NDEBUG (C library)
# if defined asserts do not generate code. This is commonly used
# as a command line option.
#
# RTEMS_TEST_NO_PAUSE (RTEMS tests)
# do not pause between screens of output in the rtems tests
#
# NO_TABLE_MOVE (SPARC PORT)
# do not have a second trap table -- use the BSP's
#
# RTEMS_DEBUG (RTEMS)
# If defined, debug checks in RTEMS and support library code are enabled.
#
# CONSOLE_USE_POLLED (erc32_bsp)
# CONSOLE_USE_INTERRUPTS (erc32_bsp)
# The erc32 console driver can operate in either polled or interrupt mode.
# Under the simulator (especially when FAST_UART is defined), polled seems
# to operate better. It is common for a task to print a line (like the
# end of test message) and then exit. In this case, the program returns
# control to the simulator command line before the program has even queued
# the output to the uart. Thus sis has no chance of getting the data out.
#
# SIMSPARC_FAST_IDLE (erc32_bsp)
# If defined, speed up the clock ticks while the idle task is running so
# time spent in the idle task is minimized. This significantly reduces
# the wall time required to execute the RTEMS test suites.
#
# FPU_REVB (erc32_bsp)
# If defined, enables work-around for bug 3.14 in FPU rev.B or rev.C
#
define make-target-options
@echo "/* #define NDEBUG 1 */ " >>$@
@echo "#define RTEMS_TEST_NO_PAUSE 1" >>$@
@echo "/* #define RTEMS_DEBUG 1 */" >>$@
@echo "#define NO_TABLE_MOVE 1" >>$@
@echo "#define CONSOLE_USE_INTERRUPTS 0" >>$@
@echo "#define CONSOLE_USE_POLLED !CONSOLE_USE_INTERRUPTS" >>$@
@echo "/* #define SIMSPARC_FAST_IDLE 1 */" >>$@
@echo "#define FPU_REVB 1" >>$@
endef
# The following are definitions of make-exe which will work using ld as
# is currently required. It is expected that as of gcc 2.8, the end user
# will be able to override parts of the compilers specs and link using gcc.
ifeq ($(RTEMS_USE_GCC272),yes)
define make-exe
$(LD) -u _sbrk $(LDFLAGS) -N -T $(LINKCMDS) -o $(basename $@).exe \
$(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group
$(NM) -g -n $(basename $@).exe > $(basename $@).num
$(SIZE) $(basename $@).exe
endef
else
define make-exe
$(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -o $(basename $@).exe \
$(LINK_OBJS) $(LINK_LIBS)
$(NM) -g -n $(basename $@).exe > $(basename $@).num
$(SIZE) $(basename $@).exe
endef
endif
# Miscellaneous additions go here
Go to most recent revision | Compare with Previous | Blame | View Log