Subversion Repositories openrisc

#
#  Config file for the mvme147 BSP
#
#  $Id: mvme147.cfg,v 1.2 2001-09-27 12:02:52 chris Exp $
#

include $(RTEMS_ROOT)/make/custom/default.cfg

RTEMS_CPU=m68k
RTEMS_CPU_MODEL=m68030

# This is the actual bsp directory used during the build process.
RTEMS_BSP_FAMILY=mvme147

# default flags
CPU_CFLAGS=

# optimize flag: typically -0, could use -O4 or -fast
# -O4 is ok for RTEMS
CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-pointer

#  This section makes the target dependent options file.

#  NDEBUG (C library)
#     if defined asserts do not generate code.  This is commonly used
#     as a command line option.
#
#  RTEMS_TEST_NO_PAUSE (RTEMS tests)
#     do not pause between screens of output in the rtems tests
#
#  RTEMS_DEBUG (RTEMS)
#     If defined, debug checks in RTEMS and support library code are enabled.

define make-target-options
        @echo "/* #define NDEBUG 1 */ "                     >>$@
        @echo "#define RTEMS_TEST_NO_PAUSE 1"               >>$@
        @echo "/* #define RTEMS_DEBUG  1 */"                >>$@
endef

# The following are definitions of make-exe which will work using ld as
# is currently required.  It is expected that as of gcc 2.8, the end user
# will be able to override parts of the compilers specs and link using gcc.

ifeq ($(RTEMS_USE_GCC272),yes)
define make-exe
        $(LD) $(LDFLAGS) -N -T $(LINKCMDS) -o $(basename $@).nxe \
            $(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group
        $(OBJCOPY) -O srec $(basename $@).nxe $(basename $@).i
        $(SED) -e 's/.$$//' -e '/^S0/d' $(basename $@).i | \
            $(PACKHEX) > $(basename $@).exe
        $(NM) -g -n $(basename $@).nxe > $(basename $@).num
        $(SIZE) $(basename $@).nxe
endef
else
define make-exe
        $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -o $(basename $@).nxe \
            $(LINK_OBJS) $(LINK_LIBS)
        $(OBJCOPY) -O srec $(basename $@).nxe $(basename $@).i
        $(SED) -e 's/.$$//' -e '/^S0/d' $(basename $@).i | \
            $(PACKHEX) > $(basename $@).exe
        $(NM) -g -n $(basename $@).nxe > $(basename $@).num
        $(SIZE) $(basename $@).nxe
endef
endif
# Miscellaneous additions go here