OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [make/] [custom/] [mvme2307.cfg] - Rev 173

Compare with Previous | Blame | View Log

#
#  Config file for the PowerPC 604 based mvme2307
#
#  $Id: mvme2307.cfg,v 1.2 2001-09-27 12:02:52 chris Exp $
#

include $(RTEMS_ROOT)/make/custom/default.cfg

RTEMS_CPU=powerpc
RTEMS_CPU_MODEL=mpc604
RTEMS_PPC_EXCEPTION_PROCESSING_MODEL=new

# This is the actual bsp directory used during the build process.
RTEMS_BSP_FAMILY=motorola_powerpc

#  This section makes the target dependent options file.

#  NDEBUG (C library)
#     if defined asserts do not generate code.  This is commonly used
#     as a command line option.
#
#  RTEMS_TEST_NO_PAUSE (RTEMS tests)
#     do not pause between screens of output in the rtems tests
#
#  RTEMS_DEBUG (RTEMS)
#     If defined, debug checks in RTEMS and support library code are enabled.
#
#  CONSOLE_USE_POLLED     (mvme2307_bsp)
#  CONSOLE_USE_INTERRUPTS (mvme2307_bsp)
#     The mvme2307 console driver has the structure to operate in either
#     polled or interrupt mode.  However both modes only trap to the
#     monitor currently.
#
#  PPC_VECTOR_FILE_BASE (PowerPC)
#     This defines the base address of the exception table.
#     NOTE: Vectors are actually at 0xFFF00000 but file starts at offset 0x0100
#
#  PPC_USE_SPRG (RTEMS PowerPC port)
#     If defined, then the PowerPC specific code in RTEMS will use some
#     of the special purpose registers to slightly optimize interrupt
#     response time.  The use of these registers can conflict with 
#     other tools like debuggers.
#

define make-target-options
        @echo "/* #define NDEBUG 1 */ "                        >>$@
        @echo "#define RTEMS_TEST_NO_PAUSE 1"                  >>$@
        @echo "/* #define RTEMS_DEBUG  1 */"                   >>$@
        @echo "#define PPCN_60X_USE_DINK 0"                   >>$@
        @echo "#define PPCN_60X_USE_NONE 1"                   >>$@
        @echo "#define PPC_USE_DATA_CACHE 1"                   >>$@
        @echo "#define PPC_VECTOR_FILE_BASE 0x0100"            >>$@
        @echo "#define PPC_USE_SPRG  1"
endef

#  This contains the compiler options necessary to select the CPU model
#  and (hopefully) optimize for it. 
#
CPU_CFLAGS = -mcpu=604 -mmultiple -mstring -mstrict-align

# optimize flag: typically -0, could use -O4 or -fast
# -O4 is ok for RTEMS
# NOTE: some level of -O may be actually required by inline assembler
#CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions
CFLAGS_OPTIMIZE_V = -O4

# debug flags: typically none, but at least -O1 is required due to this
# BSP using inlined code
CFLAGS_DEBUG_V = -O1

# profile flags: typically none, but at least -O1 is required due to this
# BSP using inlined code
CFLAGS_PROFILE_V = -O1   

# The following is a linkcmds file which will work without using the
# -specs system in gcc 2.8.
#       $(LD) $(XLDFLAGS) -T $(LINKCMDS) \
#         -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)
#       $(LD) $(XLDFLAGS) -Ttext 0x20000 \
#         -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)

#       $(CC) -mmvme -mrtems -nostartfiles -mcpu=603 \
#           -o $(basename $@).exe -L $(PROJECT_RELEASE)/lib \
#            $(START_FILE) $(LINK_OBJS) \
#            $(LD_LIBS) \
#           -Wl,-\( -Wl,-lc -Wl,-lrtemsall -Wl,-lgcc -Wl,-\)
define make-exe
        $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -o $@ $(LINK_OBJS) $(LINK_LIBS)
        $(NM) -g -n $@ > $(basename $@).num
        $(SIZE) $@
#    The following commands make a bootable image but will not work outside
#    the build tree.
#       test -d ${PROJECT_RELEASE}/bin || mkdir ${PROJECT_RELEASE}/bin
#       $(CP) $@ $(PROJECT_ROOT)/powerpc-rtems/c/mvme2307/lib/libbsp/powerpc/$(RTEMS_BSP_FAMILY)/bootloader/$(ARCH); \
#       ( cd $(PROJECT_ROOT)/powerpc-rtems/c/mvme2307/lib/libbsp/powerpc/$(RTEMS_BSP_FAMILY)/bootloader; \
#       $(MAKE) bootloader BINARY_LOADED=$@; )
#       f=`basename $@ .exe`; \
#        cp $(PROJECT_ROOT)/powerpc-rtems/c/mvme2307/lib/libbsp/powerpc/$(RTEMS_BSP_FAMILY)/bootloader/bootloader \
#           ${PROJECT_RELEASE}/bin/$${f}$(LIB_VARIANT).exe \
#       && chmod 755 \
#         ${PROJECT_RELEASE}/bin/$${f}$(LIB_VARIANT).exe
endef


# Miscellaneous additions go here

# No start file
START_BASE=

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.