URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [rtems/] [make/] [custom/] [p4000.cfg] - Rev 591
Go to most recent revision | Compare with Previous | Blame | View Log
#
# Config file for the algorithmics p4000 evaluation board
#
# $Id: p4000.cfg,v 1.2 2001-09-27 12:02:52 chris Exp $
#
# NOTE: this file is broken !
CPU_DEFINES+=-DP4000 -DCPU_R4000 -DP3_DIAG -D_R4000 -D__mips=3
# This is the actual bsp directory used during the build process.
RTEMS_BSP_FAMILY=p4000
# This section makes the target dependent options file.
# NDEBUG (C library)
# if defined asserts do not generate code. This is commonly used
# as a command line option.
#
# RTEMS_TEST_NO_PAUSE (RTEMS tests)
# do not pause between screens of output in the rtems tests
#
# RTEMS_DEBUG (RTEMS)
# If defined, debug checks in RTEMS and support library code are enabled.
#
define make-target-options
@echo "/* #define NDEBUG 1 */ " >>$@
@echo "#define RTEMS_TEST_NO_PAUSE 1" >>$@
@echo "/* #define RTEMS_DEBUG 1 */" >>$@
endef
# optimize flag: typically -0, could use -O4 or -fast
# -O4 is ok for RTEMS
CFLAGS_OPTIMIZE_V=-O4 -fomit-frame-pointer
# The following are definitions of make-exe which will work using ld as
# is currently required. It is expected that as of gcc 2.8, the end user
# will be able to override parts of the compilers specs and link using gcc.
ifeq ($(RTEMS_USE_GCC272),yes)
define make-exe
$(CC) $(LDFLAGS) -nostdlib -o $(basename $@).exe \
-T$(PROJECT_RELEASE)/lib/linkcmds $(LINK_OBJS) $(LINK_LIBS) $(LD_PATHS:%=-L %)
$(OBJCOPY) -O srec $(basename $@).exe $(basename $@).srec1
$(PACKHEX) < $(basename $@).srec1 > $(basename $@).srec
$(RM) $(basename $@).srec1
$(NM) -n $(basename $@).exe > $(basename $@).num
$(SIZE) $(basename $@).exe
endef
else
define make-exe
$(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -o $(basename $@).exe \
$(LINK_OBJS) $(LINK_LIBS)
$(OBJCOPY) -O srec $(basename $@).exe $(basename $@).srec1
$(PACKHEX) < $(basename $@).srec1 > $(basename $@).srec
$(RM) $(basename $@).srec1
$(NM) -n $(basename $@).exe > $(basename $@).num
$(SIZE) $(basename $@).exe
endef
endif
# Miscellaneous additions go here
Go to most recent revision | Compare with Previous | Blame | View Log