URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [rtos/] [rtems/] [make/] [custom/] [psim.cfg] - Rev 412
Go to most recent revision | Compare with Previous | Blame | View Log
#
# Config file for the PowerPC 60x simulator - psim
#
# $Id: psim.cfg,v 1.2 2001-09-27 12:02:52 chris Exp $
#
include $(RTEMS_ROOT)/make/custom/default.cfg
RTEMS_CPU=powerpc
RTEMS_CPU_MODEL=ppc603e
# This is the actual bsp directory used during the build process.
RTEMS_BSP_FAMILY=psim
# This section makes the target dependent options file.
# NDEBUG (C library)
# if defined asserts do not generate code. This is commonly used
# as a command line option.
#
# RTEMS_TEST_NO_PAUSE (RTEMS tests)
# do not pause between screens of output in the rtems tests
#
# RTEMS_DEBUG (RTEMS)
# If defined, debug checks in RTEMS and support library code are enabled.
#
# CONSOLE_USE_POLLED (psim_bsp)
# CONSOLE_USE_INTERRUPTS (psim_bsp)
# The psim console driver has the structure to operate in either
# polled or interrupt mode. However both modes only trap to the
# monitor currently.
#
# PSIM_FAST_IDLE (psim_bsp)
# If defined, speed up the clock ticks while the idle task is running so
# time spent in the idle task is minimized. This significantly reduces
# the wall time required to execute the RTEMS test suites.
#
# PPC_VECTOR_FILE_BASE (PowerPC)
# This defines the base address of the exception table.
# NOTE: Vectors are actually at 0xFFF00000 but file starts at offset 0x0100
#
# PPC_USE_SPRG (RTEMS PowerPC port)
# If defined, then the PowerPC specific code in RTEMS will use some
# of the special purpose registers to slightly optimize interrupt
# response time. The use of these registers can conflict with
# other tools like debuggers.
define make-target-options
@echo "/* #define NDEBUG 1 */ " >>$@
@echo "#define RTEMS_TEST_NO_PAUSE 1" >>$@
@echo "/* #define RTEMS_DEBUG 1 */" >>$@
@echo "#define CONSOLE_USE_INTERRUPTS 0" >>$@
@echo "#define CONSOLE_USE_POLLED !CONSOLE_USE_INTERRUPTS" >>$@
@echo "#define PSIM_FAST_IDLE 1" >>$@
@echo "#define PPC_VECTOR_FILE_BASE 0xFFF00100" >>$@
@echo "#define PPC_USE_SPRG 1" >>$@
endef
# This contains the compiler options necessary to select the CPU model
# and (hopefully) optimize for it.
#
CPU_CFLAGS = -mcpu=603
#-ffunction-sections
# optimize flag: typically -0, could use -O4 or -fast
# -O4 is ok for RTEMS
# NOTE: some level of -O may be actually required by inline assembler
CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions
# The following is a linkcmds file which will work without using the
# -specs system in gcc 2.8.
# $(LD) $(XLDFLAGS) -T $(LINKCMDS) \
# -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)
# $(LD) $(XLDFLAGS) -Ttext 0x20000 \
# -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)
# $(CC) -mmvme -mrtems -nostartfiles -mcpu=603 \
# -o $(basename $@).exe -L $(PROJECT_RELEASE)/lib \
# $(START_FILE) $(LINK_OBJS) \
# $(LD_LIBS) \
# -Wl,-\( -Wl,-lc -Wl,-lrtemsall -Wl,-lgcc -Wl,-\)
ifeq ($(RTEMS_USE_GCC272),yes)
define make-exe
$(CC) $(CFLAGS) -o $(basename $@).exe $(LINK_OBJS) $(LINK_LIBS)
$(NM) -g -n $@ > $(basename $@).num
$(SIZE) $@
endef
else
# -Wl,--gc-sections
define make-exe
$(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -o $(basename $@).exe \
$(LINK_OBJS) $(LINK_LIBS)
$(NM) -g -n $@ > $(basename $@).num
$(SIZE) $@
endef
endif
# Miscellaneous additions go here
Go to most recent revision | Compare with Previous | Blame | View Log