URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
[/] [openrisc/] [trunk/] [rtos/] [rtems/] [make/] [custom/] [score603e.cfg] - Rev 412
Go to most recent revision | Compare with Previous | Blame | View Log
#
# Config file for a PowerPC 603e based Vista VMEbus Single Board Computer.
# This BSP should work with the following models:
#
# + Vista SCORE 603e
#
# $Id: score603e.cfg,v 1.2 2001-09-27 12:02:52 chris Exp $
#
RTEMS_CPU=powerpc
RTEMS_CPU_MODEL=ppc603e
# Set the default generation if it has not been overridden
ifeq ($(SCORE603E_GENERATION),)
SCORE603E_GENERATION=2
endif
# This is the actual bsp directory used during the build process.
RTEMS_BSP_FAMILY=score603e
ifeq ($(SCORE603E_GENERATION),1)
RTEMS_BSP=score603e_g1
else
ifeq ($(SCORE603E_GENERATION),2)
RTEMS_BSP=score603e
endif # generation 2
endif # generation 1
include $(RTEMS_ROOT)/make/custom/default.cfg
# This section makes the target dependent options file.
# NDEBUG (C library)
# if defined asserts do not generate code. This is commonly used
# as a command line option.
#
# RTEMS_TEST_NO_PAUSE (RTEMS tests)
# do not pause between screens of output in the rtems tests
#
# RTEMS_DEBUG (RTEMS)
# If defined, debug checks in RTEMS and support library code are enabled.
#
# CONSOLE_USE_POLLED (score603e_bsp)
# CONSOLE_USE_INTERRUPTS (score603e_bsp)
# The score603e console driver has the structure to operate in either
# polled or interrupt mode. However both modes only trap to the
# monitor currently.
#
# SCORE603E_USE_SDS (score603e_bsp)
# SCORE603E_USE_OPEN_FIRMWARE (score603e_bsp)
# SCORE603E_USE_NONE (score603e_bsp)
# The Score603e board can be configured with 3 ROM monitors. Only two
# are appropriate for use with RTEMS. Set exactly one of these to "1"
# to indicate which ROM monitor is on the board you are using.
#
# PPC_VECTOR_FILE_BASE (ppc)
# This defines the base address of the exception table.
# NOTE: Vectors are actually at 0xFFF00000 but file starts at offset 0x0100
#
# PPC_USE_SPRG (RTEMS PowerPC port)
# If defined, then the PowerPC specific code in RTEMS will use some
# of the special purpose registers to slightly optimize interrupt
# response time. The use of these registers can conflict with
# other tools like debuggers.
#
# PPC_USE_DATA_CACHE (RTEMS PowerPC port)
# If defined, then the PowerPC specific code in RTEMS will use
# data cache instructions to optimize the context switch code.
# This code can conflict with debuggers or emulators.
#
define make-target-options
@echo "/* #define NDEBUG 1 */ " >>$@
@echo "#define RTEMS_TEST_NO_PAUSE 1" >>$@
@echo "/* #define RTEMS_DEBUG 1 */" >>$@
@echo "#define CONSOLE_USE_INTERRUPTS 0" >>$@
@echo "#define INITIALIZE_COM_PORTS 1" >>$@
@echo "#define SCORE603E_GENERATION $(SCORE603E_GENERATION)" >>$@
@echo "#define SCORE603E_USE_SDS 0" >>$@
@echo "#define SCORE603E_USE_NONE 0" >>$@
@echo "#define SCORE603E_USE_DINK 1" >>$@
@echo "#define SCORE603E_USE_OPEN_FIRMWARE 0" >>$@
@echo "#define PPC_USE_DATA_CACHE 0" >>$@
@echo "#define PPC_VECTOR_FILE_BASE 0x0100" >>$@
@echo "#define PPC_USE_SPRG 0" >>$@
@echo "#define HAS_PMC_PSC8 0" >>$@
endef
# This contains the compiler options necessary to select the CPU model
# and (hopefully) optimize for it.
#
CPU_CFLAGS = -mcpu=603
# optimize flag: typically -0, could use -O4 or -fast
# -O4 is ok for RTEMS
# NOTE: some level of -O may be actually required by inline assembler
CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions
# CFLAGS_OPTIMIZE_V=-O0
# The following is a linkcmds file which will work without using the
# -specs system in gcc 2.8.
# $(LD) $(XLDFLAGS) -T $(LINKCMDS) \
# -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)
# $(LD) $(XLDFLAGS) -Ttext 0x20000 \
# -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)
ifeq ($(RTEMS_USE_GCC272),yes)
define make-exe
@echo gcc 2.7.2 style linking not supported by score603e
@exit 1
endef
else
define make-exe
$(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) \
-o $(basename $@).elf $(LINK_OBJS) $(LINK_LIBS)
$(NM) -g -n $(basename $@).elf > $(basename $@).num
$(SIZE) $(basename $@).elf
$(OBJCOPY) -O srec $(basename $@).elf $(basename $@).s1
sed -e 's/.$$//' $(basename $@).s1 | \
$(PACKHEX) >$(basename $@).exe
rm -f $(basename $@).s1
endef
endif
# Miscellaneous additions go here
DRIVER_ARCHITECTURE=vmebus
Go to most recent revision | Compare with Previous | Blame | View Log