URL
https://opencores.org/ocsvn/openverifla/openverifla/trunk
Subversion Repositories openverifla
[/] [openverifla/] [trunk/] [openverifla_2.4/] [verilog/] [verifla/] [u_rec_of_verifla.v] - Rev 47
Go to most recent revision | Compare with Previous | Blame | View Log
/* Update: Laurentiu Duca, 20180808_1200: - consider baud_clk_posedge Update: Laurentiu Duca, 20180724_1550: - removed "rdy_o <= 1'b0;" from idle state and moved to STA_CHECK_START_BIT. - sample in the middle of the data bit - correct init values and sizes */ ///////////////////////////////////////////////////////////////////// //// Author: Zhangfeifei //// //// //// //// Advance Test Technology Laboratory, //// //// Institute of Computing Technology, //// //// Chinese Academy of Sciences //// //// //// //// If you encountered any problem, please contact : //// //// Email: zhangfeifei@ict.ac.cn or whitewill@opencores.org //// //// Tel: +86-10-6256 5533 ext. 5673 //// //// //// //// Downloaded from: //// //// http://www.opencores.org/pdownloads.cgi/list/ucore //// ///////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2005-2006 Zhangfeifei //// //// zhangfeifei@ict.ac.cn //// //// //// //// //// //// This source file may be used and distributed freely without //// //// restriction provided that this copyright statement is not //// //// removed from the file and any derivative work contains the //// //// original copyright notice and the associated disclaimer. //// //// //// //// Please let the author know if it is used //// //// for commercial purpose. //// //// //// //// THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY //// //// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED //// //// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS //// //// FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE AUTHOR //// //// OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, //// //// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES //// //// (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE //// //// GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR //// //// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF //// //// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT //// //// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT //// //// OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE //// //// POSSIBILITY OF SUCH DAMAGE. //// //// //// ///////////////////////////////////////////////////////////////////// //// //// //// //// //// Date of Creation: 2005.12.3 //// //// //// //// Version: 0.0.1 //// //// //// //// Description: rx module of the uart module,data format is //// //// 8bits data,1 bits stop bit,and no parity check //// //// //// ///////////////////////////////////////////////////////////////////// //// //// //// Change log: //// //// //// ///////////////////////////////////////////////////////////////////// module u_rec_of_verifla( clk_i,rst_i,//system signal baud_clk_posedge, rxd_i,//serial data in rdy_o,data_o //data ready and parallel data out signal ); parameter // state difinition STA_IDLE = 0, STA_CHECK_START_BIT = 1, STA_RECEIVE = 2; input clk_i; input rst_i; input baud_clk_posedge; input rxd_i; output rdy_o; output [7:0] data_o; reg rdy_o; reg [7:0] data_o; reg [7:0] rsr;//reciving shift register reg [3:0] num_of_rec; reg [1:0] reg_sta; //the counter to count the clk in reg [3:0] count; reg count_c;//the carry of count always @(posedge clk_i or posedge rst_i) begin if(rst_i) begin data_o <= 8'b0; rdy_o <= 1'b0; rsr <= 8'h0; num_of_rec <= 4'b0; count <= 4'b0; count_c <= 1'b0; reg_sta <= STA_IDLE; end else begin if(baud_clk_posedge) case (reg_sta) STA_IDLE: begin num_of_rec <= 4'd0; count <= 4'd0; if(!rxd_i) reg_sta <= STA_CHECK_START_BIT;//recive a start bit else reg_sta <= STA_IDLE; end STA_CHECK_START_BIT: begin if(count >= 7) begin count <= 0; if(!rxd_i) begin //has passed 8 clk and rxd_i is still zero,then start bit has been confirmed rdy_o <= 1'b0; reg_sta <= STA_RECEIVE; end else reg_sta <= STA_IDLE; end else begin reg_sta <= STA_CHECK_START_BIT; count <= count +1; end end STA_RECEIVE: begin {count_c,count} <= count +1; //has passed 16 clk after the last bit has been checked,sampling a bit if(count_c) begin if(num_of_rec <=4'd7) begin //sampling the received bit rsr <= {rxd_i,rsr[7:1]}; num_of_rec <= num_of_rec +1; reg_sta <= STA_RECEIVE; end else begin//sampling the stop bit //if(rxd_i)//if stop bit exist //begin data_o <= rsr; rdy_o <= 1'b1; //end reg_sta <= STA_IDLE; end end end endcase end end endmodule
Go to most recent revision | Compare with Previous | Blame | View Log