URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [branches/] [mp3_stable/] [or1200/] [rtl/] [verilog/] [generic_dpram_32x32.v] - Rev 210
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// Generic Double-Port Synchronous RAM //// //// //// //// This file is part of memory library available from //// //// http://www.opencores.org/cvsweb.shtml/generic_memories/ //// //// //// //// Description //// //// This block is a wrapper with common double-port //// //// synchronous memory interface for different //// //// types of ASIC and FPGA RAMs. Beside universal memory //// //// interface it also provides behavioral model of generic //// //// double-port synchronous RAM. //// //// It should be used in all OPENCORES designs that want to be //// //// portable accross different target technologies and //// //// independent of target memory. //// //// //// //// Supported ASIC RAMs are: //// //// - Artisan Double-Port Sync RAM //// //// - Avant! Two-Port Sync RAM (*) //// //// - Virage 2-port Sync RAM //// //// //// //// Supported FPGA RAMs are: //// //// - Xilinx Virtex RAMB4_S16_S16 //// //// //// //// To Do: //// //// - fix Avant! //// //// - xilinx rams need external tri-state logic //// //// - add additional RAMs (Altera, VS etc) //// //// //// //// Author(s): //// //// - Damjan Lampret, lampret@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.1 2001/08/09 13:39:33 lampret // Major clean-up. // // Revision 1.2 2001/07/30 05:38:02 lampret // Adding empty directories required by HDL coding guidelines // // // synopsys translate_off `include "timescale.v" // synopsys translate_on `include "defines.v" module generic_dpram_32x32( // Generic synchronous double-port RAM interface clk_a, rst_a, ce_a, oe_a, addr_a, do_a, clk_b, rst_b, ce_b, we_b, addr_b, di_b ); // // Default address and data buses width // parameter aw = 5; parameter dw = 32; // // Generic synchronous double-port RAM interface // input clk_a; // Clock input rst_a; // Reset input ce_a; // Chip enable input input oe_a; // Output enable input input [aw-1:0] addr_a; // address bus inputs output [dw-1:0] do_a; // output data bus input clk_b; // Clock input rst_b; // Reset input ce_b; // Chip enable input input we_b; // Write enable input input [aw-1:0] addr_b; // address bus inputs input [dw-1:0] di_b; // input data bus // // Internal wires and registers // `ifdef ARTISAN_SDP // // Instantiation of ASIC memory: // // Artisan Synchronous Double-Port RAM (ra2sh) // art_hsdp_32x32 #(dw, 1<<aw, aw) artisan_sdp( .qa(do_a), .clka(clk_a), .cena(~ce_a), .wena(1'b1), .aa(addr_a), .da(32'h00000000), .oena(~oe_a), .qb(), .clkb(clk_b), .cenb(~ce_b), .wenb(~we_b), .ab(addr_b), .db(di_b), .oenb(1'b1) ); `else `ifdef AVANT_ATP // // Instantiation of ASIC memory: // // Avant! Asynchronous Two-Port RAM // avant_atp avant_atp( .web(~we), .reb(), .oeb(~oe), .rcsb(), .wcsb(), .ra(addr), .wa(addr), .di(di), .do(do) ); `else `ifdef VIRAGE_STP // // Instantiation of ASIC memory: // // Virage Synchronous 2-port R/W RAM // virage_stp virage_stp( .QA(do_a), .QB(), .ADRA(addr_a), .DA(32'h00000000), .WEA(1'b0), .OEA(oe_a), .MEA(ce_a), .CLKA(clk_a), .ADRB(addr_b), .DB(di_b), .WEB(we_b), .OEB(1'b1), .MEB(ce_b), .CLKB(clk_b) ); `else `ifdef XILINX_RAM32X1D // // Instantiation of FPGA memory: // // Virtex/Spartan2 // // // Block 0 // xcv_ram32x8d xcv_ram32x8d_0 ( .DPO(do_a[7:0]), .SPO(), .A(addr_b), .D(di_b[7:0]), .DPRA(addr_a), .WCLK(clk_b), .WE(we_b) ); // // Block 1 // xcv_ram32x8d xcv_ram32x8d_1 ( .DPO(do_a[15:8]), .SPO(), .A(addr_b), .D(di_b[15:8]), .DPRA(addr_a), .WCLK(clk_b), .WE(we_b) ); // // Block 2 // xcv_ram32x8d xcv_ram32x8d_2 ( .DPO(do_a[23:16]), .SPO(), .A(addr_b), .D(di_b[23:16]), .DPRA(addr_a), .WCLK(clk_b), .WE(we_b) ); // // Block 3 // xcv_ram32x8d xcv_ram32x8d_3 ( .DPO(do_a[31:24]), .SPO(), .A(addr_b), .D(di_b[31:24]), .DPRA(addr_a), .WCLK(clk_b), .WE(we_b) ); `else `ifdef XILINX_RAMB4 // // Instantiation of FPGA memory: // // Virtex/Spartan2 // // // Block 0 // RAMB4_S16_S16 ramb4_s16_0( .CLKA(clk_a), .RSTA(rst_a), .ADDRA(addr_a), .DIA(16'h0000), .ENA(ce_a), .WEA(1'b0), .DOA(do_a[15:0]) .CLKB(clk_b), .RSTB(rst_b), .ADDRB(addr_b), .DIB(di_b[15:0]), .ENB(ce_b), .WEB(we_b), .DOB() ); // // Block 1 // RAMB4_S16_S16 ramb4_s16_1( .CLKA(clk_a), .RSTA(rst_a), .ADDRA(addr_a), .DIA(16'h0000), .ENA(ce_a), .WEA(1'b0), .DOA(do_a[31:16]) .CLKB(clk_b), .RSTB(rst_b), .ADDRB(addr_b), .DIB(di_b[31:16]), .ENB(ce_b), .WEB(we_b), .DOB() ); `else // // Generic double-port synchronous RAM model // // // Generic RAM's registers and wires // reg [dw-1:0] mem [(1<<aw)-1:0]; // RAM content reg [dw-1:0] do_reg; // RAM data output register // // Data output drivers // assign do_a = (oe_a) ? do_reg : {dw{1'bz}}; // // RAM read // always @(posedge clk_a) if (ce_a) do_reg <= #1 mem[addr_a]; // // RAM write // always @(posedge clk_b) if (ce_b && we_b) mem[addr_b] <= #1 di_b; `endif // !XILINX_RAMB4_S16_S16 `endif // !XILINX_RAM32X1D `endif // !VIRAGE_STP `endif // !AVANT_ATP `endif // !ARTISAN_SDP endmodule
Go to most recent revision | Compare with Previous | Blame | View Log