URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [branches/] [mp3_stable/] [or1200/] [rtl/] [verilog/] [generic_spram_2048x32.v] - Rev 218
Go to most recent revision | Compare with Previous | Blame | View Log
////////////////////////////////////////////////////////////////////// //// //// //// Generic Single-Port Synchronous RAM //// //// //// //// This file is part of memory library available from //// //// http://www.opencores.org/cvsweb.shtml/generic_memories/ //// //// //// //// Description //// //// This block is a wrapper with common single-port //// //// synchronous memory interface for different //// //// types of ASIC and FPGA RAMs. Beside universal memory //// //// interface it also provides behavioral model of generic //// //// single-port synchronous RAM. //// //// It should be used in all OPENCORES designs that want to be //// //// portable accross different target technologies and //// //// independent of target memory. //// //// //// //// Supported ASIC RAMs are: //// //// - Artisan Single-Port Sync RAM //// //// - Avant! Two-Port Sync RAM (*) //// //// - Virage Single-Port Sync RAM //// //// - Virtual Silicon Single-Port Sync RAM //// //// //// //// Supported FPGA RAMs are: //// //// - Xilinx Virtex RAMB4_S16 //// //// //// //// To Do: //// //// - xilinx rams need external tri-state logic //// //// - fix avant! two-port ram //// //// - add additional RAMs (Altera etc) //// //// //// //// Author(s): //// //// - Damjan Lampret, lampret@opencores.org //// //// //// ////////////////////////////////////////////////////////////////////// //// //// //// Copyright (C) 2000 Authors and OPENCORES.ORG //// //// //// //// This source file may be used and distributed without //// //// restriction provided that this copyright statement is not //// //// removed from the file and that any derivative work contains //// //// the original copyright notice and the associated disclaimer. //// //// //// //// This source file is free software; you can redistribute it //// //// and/or modify it under the terms of the GNU Lesser General //// //// Public License as published by the Free Software Foundation; //// //// either version 2.1 of the License, or (at your option) any //// //// later version. //// //// //// //// This source is distributed in the hope that it will be //// //// useful, but WITHOUT ANY WARRANTY; without even the implied //// //// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// //// PURPOSE. See the GNU Lesser General Public License for more //// //// details. //// //// //// //// You should have received a copy of the GNU Lesser General //// //// Public License along with this source; if not, download it //// //// from http://www.opencores.org/lgpl.shtml //// //// //// ////////////////////////////////////////////////////////////////////// // // CVS Revision History // // $Log: not supported by cvs2svn $ // Revision 1.6 2001/10/14 13:12:09 lampret // MP3 version. // // Revision 1.1.1.1 2001/10/06 10:18:36 igorm // no message // // Revision 1.1 2001/08/09 13:39:33 lampret // Major clean-up. // // Revision 1.2 2001/07/30 05:38:02 lampret // Adding empty directories required by HDL coding guidelines // // // synopsys translate_off `include "timescale.v" // synopsys translate_on `include "defines.v" module generic_spram_2048x32( // Generic synchronous single-port RAM interface clk, rst, ce, we, oe, addr, di, do ); // // Default address and data buses width // parameter aw = 11; parameter dw = 32; // // Generic synchronous single-port RAM interface // input clk; // Clock input rst; // Reset input ce; // Chip enable input input we; // Write enable input input oe; // Output enable input input [aw-1:0] addr; // address bus inputs input [dw-1:0] di; // input data bus output [dw-1:0] do; // output data bus // // Internal wires and registers // `ifdef ARTISAN_SSP // // Instantiation of ASIC memory: // // Artisan Synchronous Single-Port RAM (ra1sh) // `ifdef UNUSED art_hdsp_2048x32 #(dw, 1<<aw, aw) artisan_ssp( `else art_hdsp_2048x32 artisan_ssp( `endif .clk(clk), .cen(~ce), .wen(~we), .a(addr), .d(di), .oen(~oe), .q(do) ); `else `ifdef AVANT_ATP // // Instantiation of ASIC memory: // // Avant! Asynchronous Two-Port RAM // avant_atp avant_atp( .web(~we), .reb(), .oeb(~oe), .rcsb(), .wcsb(), .ra(addr), .wa(addr), .di(di), .do(do) ); `else `ifdef VIRAGE_SSP // // Instantiation of ASIC memory: // // Virage Synchronous 1-port R/W RAM // virage_ssp virage_ssp( .clk(clk), .adr(addr), .d(di), .we(we), .oe(oe), .me(ce), .q(do) ); `else `ifdef VIRTUALSILICON_SSP // // Instantiation of ASIC memory: // // Virtual Silicon Single-Port Synchronous SRAM // virtualsilicon_ssp #(1<<aw, aw-1, dw-1) virtualsilicon_ssp( .CK(clk), .ADR(addr), .DI(di), .WEN(~we), .CEN(~ce), .OEN(~oe), .DOUT(do) ); `else `ifdef XILINX_RAMB4 // // Instantiation of FPGA memory: // // Virtex/Spartan2 // // // Block 0 // RAMB4_S2 ramb4_s2_0( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[1:0]), .EN(ce), .WE(we), .DO(do[1:0]) ); // // Block 1 // RAMB4_S2 ramb4_s2_1( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[3:2]), .EN(ce), .WE(we), .DO(do[3:2]) ); // // Block 2 // RAMB4_S2 ramb4_s2_2( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[5:4]), .EN(ce), .WE(we), .DO(do[5:4]) ); // // Block 3 // RAMB4_S2 ramb4_s2_3( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[7:6]), .EN(ce), .WE(we), .DO(do[7:6]) ); // // Block 4 // RAMB4_S2 ramb4_s2_4( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[9:8]), .EN(ce), .WE(we), .DO(do[9:8]) ); // // Block 5 // RAMB4_S2 ramb4_s2_5( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[11:10]), .EN(ce), .WE(we), .DO(do[11:10]) ); // // Block 6 // RAMB4_S2 ramb4_s2_6( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[13:12]), .EN(ce), .WE(we), .DO(do[13:12]) ); // // Block 7 // RAMB4_S2 ramb4_s2_7( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[15:14]), .EN(ce), .WE(we), .DO(do[15:14]) ); // // Block 8 // RAMB4_S2 ramb4_s2_8( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[17:16]), .EN(ce), .WE(we), .DO(do[17:16]) ); // // Block 9 // RAMB4_S2 ramb4_s2_9( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[19:18]), .EN(ce), .WE(we), .DO(do[19:18]) ); // // Block 10 // RAMB4_S2 ramb4_s2_10( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[21:20]), .EN(ce), .WE(we), .DO(do[21:20]) ); // // Block 11 // RAMB4_S2 ramb4_s2_11( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[23:22]), .EN(ce), .WE(we), .DO(do[23:22]) ); // // Block 12 // RAMB4_S2 ramb4_s2_12( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[25:24]), .EN(ce), .WE(we), .DO(do[25:24]) ); // // Block 13 // RAMB4_S2 ramb4_s2_13( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[27:26]), .EN(ce), .WE(we), .DO(do[27:26]) ); // // Block 14 // RAMB4_S2 ramb4_s2_14( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[29:28]), .EN(ce), .WE(we), .DO(do[29:28]) ); // // Block 15 // RAMB4_S2 ramb4_s2_15( .CLK(clk), .RST(rst), .ADDR(addr), .DI(di[31:30]), .EN(ce), .WE(we), .DO(do[31:30]) ); `else // // Generic single-port synchronous RAM model // // // Generic RAM's registers and wires // reg [dw-1:0] mem [(1<<aw)-1:0]; // RAM content reg [dw-1:0] do_reg; // RAM data output register // // Data output drivers // assign do = (oe) ? do_reg : {dw{1'bz}}; // // RAM read and write // always @(posedge clk) if (ce && !we) do_reg <= #1 mem[addr]; else if (ce && we) mem[addr] <= #1 di; `endif // !XILINX_RAMB4_S16 `endif // !VIRTUALSILICON_SSP `endif // !VIRAGE_SSP `endif // !AVANT_ATP `endif // !ARTISAN_SSP endmodule
Go to most recent revision | Compare with Previous | Blame | View Log