URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [branches/] [oc/] [gdb-5.0/] [sim/] [common/] [sim-alu.h] - Rev 106
Go to most recent revision | Compare with Previous | Blame | View Log
/* This file is part of the program psim. Copyright (C) 1994-1996, Andrew Cagney <cagney@highland.com.au> Copyright (C) 1997, Free Software Foundation, Inc. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef _SIM_ALU_H_ #define _SIM_ALU_H_ #include "symcat.h" /* INTEGER ALU MODULE: This module provides an implementation of 2's complement arithmetic including the recording of carry and overflow status bits. EXAMPLE: Code using this module includes it into sim-main.h and then, as a convention, defines macro's ALU*_END that records the result of any aritmetic performed. Ex: #include "sim-alu.h" #define ALU32_END(RES) \ (RES) = ALU32_OVERFLOW_RESULT; \ carry = ALU32_HAD_CARRY_BORROW; \ overflow = ALU32_HAD_OVERFLOW The macro's are then used vis: { ALU32_BEGIN (GPR[i]); ALU32_ADDC (GPR[j]); ALU32_END (GPR[k]); } NOTES: Macros exist for efficiently computing 8, 16, 32 and 64 bit arithmetic - ALU8_*, ALU16_*, .... In addition, according to TARGET_WORD_BITSIZE a set of short-hand macros are defined - ALU_* Initialization: ALU*_BEGIN(ACC): Declare initialize the ALU accumulator with ACC. Results: The calculation of the final result may be computed a number of different ways. Three different overflow macro's are defined, the most efficient one to use depends on which other outputs from the alu are being used. ALU*_RESULT: Generic ALU result output. ALU*_HAD_OVERFLOW: Returns a nonzero value if signed overflow occured. ALU*_OVERFLOW_RESULT: If the macro ALU*_HAD_OVERFLOW is being used this is the most efficient result available. Ex: #define ALU16_END(RES) \ if (ALU16_HAD_OVERFLOW) \ sim_engine_halt (...); \ (RES) = ALU16_OVERFLOW_RESULT ALU*_HAD_CARRY_BORROW: Returns a nonzero value if unsigned overflow or underflow (also refered to as carry and borrow) occured. ALU*_CARRY_BORROW_RESULT: If the macro ALU*_HAD_CARRY_BORROW is being used this is the most efficient result available. Ex: #define ALU64_END(RES) \ State.carry = ALU64_HAD_CARRY_BORROW; \ (RES) = ALU64_CARRY_BORROW_RESULT Addition: ALU*_ADD(VAL): Add VAL to the ALU accumulator. Record any overflow as well as the final result. ALU*_ADDC(VAL): Add VAL to the ALU accumulator. Record any carry-out or overflow as well as the final result. ALU*_ADDC_C(VAL,CI): Add VAL and CI (carry-in). Record any carry-out or overflow as well as the final result. Subtraction: ALU*_SUB(VAL): Subtract VAL from the ALU accumulator. Record any underflow as well as the final result. ALU*_SUBC(VAL): Subtract VAL from the ALU accumulator using negated addition. Record any underflow or carry-out as well as the final result. ALU*_SUBB(VAL): Subtract VAL from the ALU accumulator using direct subtraction (ACC+~VAL+1). Record any underflow or borrow-out as well as the final result. ALU*_SUBC_X(VAL,CI): Subtract VAL and CI (carry-in) from the ALU accumulator using extended negated addition (ACC+~VAL+CI). Record any underflow or carry-out as well as the final result. ALU*_SUBB_B(VAL,BI): Subtract VAL and BI (borrow-in) from the ALU accumulator using direct subtraction. Record any underflow or borrow-out as well as the final result. */ /* Twos complement aritmetic - addition/subtraction - carry/borrow (or you thought you knew the answer to 0-0) Notation and Properties: Xn denotes the value X stored in N bits. MSBn (X): The most significant (sign) bit of X treated as an N bit value. SEXTn (X): The infinite sign extension of X treated as an N bit value. MAXn, MINn: The upper and lower bound of a signed, two's complement N bit value. UMAXn: The upper bound of an unsigned N bit value (the lower bound is always zero). Un: UMAXn + 1. Unsigned arrithmetic is computed `modulo (Un)'. X[p]: Is bit P of X. X[0] denotes the least signifant bit. ~X[p]: Is the inversion of bit X[p]. Also equal to 1-X[p], (1+X[p])mod(2). Addition - Overflow - Introduction: Overflow/Overflow indicates an error in computation of signed arrithmetic. i.e. given X,Y in [MINn..MAXn]; overflow indicates that the result X+Y > MAXn or X+Y < MIN_INTx. Hardware traditionally implements overflow by computing the XOR of carry-in/carry-out of the most significant bit of the ALU. Here other methods need to be found. Addition - Overflow - method 1: Overflow occures when the sign (most significant bit) of the two N bit operands is identical but different to the sign of the result: Rn = (Xn + Yn) V = MSBn (~(Xn ^ Yn) & (Rn ^ Xn)) Addition - Overflow - method 2: The two N bit operands are sign extended to M>N bits and then added. Overflow occures when SIGN_BIT<n> and SIGN_BIT<m> do not match. Rm = (SEXTn (Xn) + SEXTn (Yn)) V = MSBn ((Rm >> (M - N)) ^ Rm) Addition - Overflow - method 3: The two N bit operands are sign extended to M>N bits and then added. Overflow occures when the result is outside of the sign extended range [MINn .. MAXn]. Addition - Overflow - method 4: Given the Result and Carry-out bits, the oVerflow from the addition of X, Y and carry-In can be computed using the equation: Rn = (Xn + Yn) V = (MSBn ((Xn ^ Yn) ^ Rn)) ^ C) As shown in the table below: I X Y R C | V | X^Y ^R ^C ---------------+---+------------- 0 0 0 0 0 | 0 | 0 0 0 0 0 1 1 0 | 0 | 1 0 0 0 1 0 1 0 | 0 | 1 0 0 0 1 1 0 1 | 1 | 0 0 1 1 0 0 1 0 | 1 | 0 1 1 1 0 1 0 1 | 0 | 1 1 0 1 1 0 0 1 | 0 | 1 1 0 1 1 1 1 1 | 0 | 0 1 0 Addition - Carry - Introduction: Carry (poorly named) indicates that an overflow occured for unsigned N bit addition. i.e. given X, Y in [0..UMAXn] then carry indicates X+Y > UMAXn or X+Y >= Un. The following table lists the output for all given inputs into a full-adder. I X Y R | C ------------+--- 0 0 0 0 | 0 0 0 1 1 | 0 0 1 0 1 | 0 0 1 1 0 | 1 1 0 0 1 | 0 1 0 1 0 | 1 1 1 0 0 | 1 1 1 1 1 | 1 (carry-In, X, Y, Result, Carry-out): Addition - Carry - method 1: Looking at the terms X, Y and R we want an equation for C. XY\R 0 1 +------- 00 | 0 0 01 | 1 0 11 | 1 1 10 | 1 0 This giving us the sum-of-prod equation: MSBn ((Xn & Yn) | (Xn & ~Rn) | (Yn & ~Rn)) Verifying: I X Y R | C | X&Y X&~R Y&~R ------------+---+--------------- 0 0 0 0 | 0 | 0 0 0 0 0 1 1 | 0 | 0 0 0 0 1 0 1 | 0 | 0 0 0 0 1 1 0 | 1 | 1 1 1 1 0 0 1 | 0 | 0 0 0 1 0 1 0 | 1 | 0 0 1 1 1 0 0 | 1 | 0 1 0 1 1 1 1 | 1 | 1 0 0 Addition - Carry - method 2: Given two signed N bit numbers, a carry can be detected by treating the numbers as N bit unsigned and adding them using M>N unsigned arrithmetic. Carry is indicated by bit (1 << N) being set (result >= 2**N). Addition - Carry - method 3: Given the oVerflow bit. The carry can be computed from: (~R&V) | (R&V) Addition - Carry - method 4: Given two signed numbers. Treating them as unsigned we have: 0 <= X < Un, 0 <= Y < Un ==> X + Y < 2 Un Consider Y when carry occures: X + Y >= Un, Y < Un ==> (Un - X) <= Y < Un # re-arange ==> Un <= X + Y < Un + X < 2 Un # add Xn ==> 0 <= (X + Y) mod Un < X mod Un or when carry as occured: (X + Y) mod Un < X mod Un Consider Y when carry does not occure: X + Y < Un have X < Un, Y >= 0 ==> X <= X + Y < Un ==> X mod Un <= (X + Y) mod Un or when carry has not occured: ! ( (X + Y) mod Un < X mod Un) hence we get carry by computing in N bit unsigned arrithmetic. carry <- (Xn + Yn) < Xn Subtraction - Introduction There are two different ways of computing the signed two's complement difference of two numbers. The first is based on negative addition, the second on direct subtraction. Subtraction - Carry - Introduction - Negated Addition The equation X - Y can be computed using: X + (-Y) ==> X + ~Y + 1 # -Y = ~Y + 1 In addition to the result, the equation produces Carry-out. For succeeding extended prrcision calculations, the more general equation can be used: C[p]:R[p] = X[p] + ~Y[p] + C[p-1] where C[0]:R[0] = X[0] + ~Y[0] + 1 Subtraction - Borrow - Introduction - Direct Subtraction The alternative to negative addition is direct subtraction where `X-Y is computed directly. In addition to the result of the calculation, a Borrow bit is produced. In general terms: B[p]:R[p] = X[p] - Y[p] - B[p-1] where B[0]:R[0] = X[0] - Y[0] The Borrow bit is the complement of the Carry bit produced by Negated Addition above. A dodgy proof follows: Case 0: C[0]:R[0] = X[0] + ~Y[0] + 1 ==> C[0]:R[0] = X[0] + 1 - Y[0] + 1 # ~Y[0] = (1 - Y[0])? ==> C[0]:R[0] = 2 + X[0] - Y[0] ==> C[0]:R[0] = 2 + B[0]:R[0] ==> C[0]:R[0] = (1 + B[0]):R[0] ==> C[0] = ~B[0] # (1 + B[0]) mod 2 = ~B[0]? Case P: C[p]:R[p] = X[p] + ~Y[p] + C[p-1] ==> C[p]:R[p] = X[p] + 1 - Y[0] + 1 - B[p-1] ==> C[p]:R[p] = 2 + X[p] - Y[0] - B[p-1] ==> C[p]:R[p] = 2 + B[p]:R[p] ==> C[p]:R[p] = (1 + B[p]):R[p] ==> C[p] = ~B[p] The table below lists all possible inputs/outputs for a full-subtractor: X Y I | R B 0 0 0 | 0 0 0 0 1 | 1 1 0 1 0 | 1 1 0 1 1 | 0 1 1 0 0 | 1 0 1 0 1 | 0 0 1 1 0 | 0 0 1 1 1 | 1 1 Subtraction - Method 1 Treating Xn and Yn as unsigned values then a borrow (unsigned underflow) occures when: B = Xn < Yn ==> C = Xn >= Yn */ /* 8 bit target expressions: Since the host's natural bitsize > 8 bits, carry method 2 and overflow method 2 are used. */ #define ALU8_BEGIN(VAL) \ unsigned alu8_cr = (unsigned8) (VAL); \ signed alu8_vr = (signed8) (alu8_cr) #define ALU8_SET(VAL) \ alu8_cr = (unsigned8) (VAL); \ alu8_vr = (signed8) (alu8_cr) #define ALU8_SET_CARRY_BORROW(CARRY) \ do { \ if (CARRY) \ alu8_cr |= ((signed)-1) << 8; \ else \ alu8_cr &= 0xff; \ } while (0) #define ALU8_HAD_CARRY_BORROW (alu8_cr & LSBIT32(8)) #define ALU8_HAD_OVERFLOW (((alu8_vr >> 8) ^ alu8_vr) & LSBIT32 (8-1)) #define ALU8_RESULT ((unsigned8) alu8_cr) #define ALU8_CARRY_BORROW_RESULT ((unsigned8) alu8_cr) #define ALU8_OVERFLOW_RESULT ((unsigned8) alu8_vr) /* #define ALU8_END ????? - target dependant */ /* 16 bit target expressions: Since the host's natural bitsize > 16 bits, carry method 2 and overflow method 2 are used. */ #define ALU16_BEGIN(VAL) \ signed alu16_cr = (unsigned16) (VAL); \ unsigned alu16_vr = (signed16) (alu16_cr) #define ALU16_SET(VAL) \ alu16_cr = (unsigned16) (VAL); \ alu16_vr = (signed16) (alu16_cr) #define ALU16_SET_CARRY_BORROW(CARRY) \ do { \ if (CARRY) \ alu16_cr |= ((signed)-1) << 16; \ else \ alu16_cr &= 0xffff; \ } while (0) #define ALU16_HAD_CARRY_BORROW (alu16_cr & LSBIT32(16)) #define ALU16_HAD_OVERFLOW (((alu16_vr >> 16) ^ alu16_vr) & LSBIT32 (16-1)) #define ALU16_RESULT ((unsigned16) alu16_cr) #define ALU16_CARRY_BORROW_RESULT ((unsigned16) alu16_cr) #define ALU16_OVERFLOW_RESULT ((unsigned16) alu16_vr) /* #define ALU16_END ????? - target dependant */ /* 32 bit target expressions: Since most hosts do not support 64 (> 32) bit arrithmetic, carry method 4 and overflow method 4 are used. */ #define ALU32_BEGIN(VAL) \ unsigned32 alu32_r = (VAL); \ int alu32_c = 0; \ int alu32_v = 0 #define ALU32_SET(VAL) \ alu32_r = (VAL); \ alu32_c = 0; \ alu32_v = 0 #define ALU32_SET_CARRY_BORROW(CARRY) alu32_c = (CARRY) #define ALU32_HAD_CARRY_BORROW (alu32_c) #define ALU32_HAD_OVERFLOW (alu32_v) #define ALU32_RESULT (alu32_r) #define ALU32_CARRY_BORROW_RESULT (alu32_r) #define ALU32_OVERFLOW_RESULT (alu32_r) /* 64 bit target expressions: Even though the host typically doesn't support native 64 bit arrithmetic, it is still used. */ #define ALU64_BEGIN(VAL) \ unsigned64 alu64_r = (VAL); \ int alu64_c = 0; \ int alu64_v = 0 #define ALU64_SET(VAL) \ alu64_r = (VAL); \ alu64_c = 0; \ alu64_v = 0 #define ALU64_SET_CARRY_BORROW(CARRY) alu64_c = (CARRY) #define ALU64_HAD_CARRY_BORROW (alu64_c) #define ALU64_HAD_OVERFLOW (alu64_v) #define ALU64_RESULT (alu64_r) #define ALU64_CARRY_BORROW_RESULT (alu64_r) #define ALU64_OVERFLOW_RESULT (alu64_r) /* Generic versions of above macros */ #define ALU_BEGIN XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_BEGIN) #define ALU_SET XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_SET) #define ALU_SET_CARRY XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_SET_CARRY) #define ALU_HAD_OVERFLOW XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_HAD_OVERFLOW) #define ALU_HAD_CARRY XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_HAD_CARRY) #define ALU_RESULT XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_RESULT) #define ALU_OVERFLOW_RESULT XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_OVERFLOW_RESULT) #define ALU_CARRY_RESULT XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_CARRY_RESULT) /* Basic operation - add (overflowing) */ #define ALU8_ADD(VAL) \ do { \ unsigned8 alu8add_val = (VAL); \ ALU8_ADDC (alu8add_val); \ } while (0) #define ALU16_ADD(VAL) \ do { \ unsigned16 alu16add_val = (VAL); \ ALU16_ADDC (alu8add_val); \ } while (0) #define ALU32_ADD(VAL) \ do { \ unsigned32 alu32add_val = (VAL); \ ALU32_ADDC (alu32add_val); \ } while (0) #define ALU64_ADD(VAL) \ do { \ unsigned64 alu64add_val = (unsigned64) (VAL); \ ALU64_ADDC (alu64add_val); \ } while (0) #define ALU_ADD XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_ADD) /* Basic operation - add carrying (and overflowing) */ #define ALU8_ADDC(VAL) \ do { \ unsigned8 alu8addc_val = (VAL); \ alu8_cr += (unsigned8)(alu8addc_val); \ alu8_vr += (signed8)(alu8addc_val); \ } while (0) #define ALU16_ADDC(VAL) \ do { \ unsigned16 alu16addc_val = (VAL); \ alu16_cr += (unsigned16)(alu16addc_val); \ alu16_vr += (signed16)(alu16addc_val); \ } while (0) #define ALU32_ADDC(VAL) \ do { \ unsigned32 alu32addc_val = (VAL); \ unsigned32 alu32addc_sign = alu32addc_val ^ alu32_r; \ alu32_r += (alu32addc_val); \ alu32_c = (alu32_r < alu32addc_val); \ alu32_v = ((alu32addc_sign ^ - (unsigned32)alu32_c) ^ alu32_r) >> 31; \ } while (0) #define ALU64_ADDC(VAL) \ do { \ unsigned64 alu64addc_val = (unsigned64) (VAL); \ unsigned64 alu64addc_sign = alu64addc_val ^ alu64_r; \ alu64_r += (alu64addc_val); \ alu64_c = (alu64_r < alu64addc_val); \ alu64_v = ((alu64addc_sign ^ - (unsigned64)alu64_c) ^ alu64_r) >> 63; \ } while (0) #define ALU_ADDC XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_ADDC) /* Compound operation - add carrying (and overflowing) with carry-in */ #define ALU8_ADDC_C(VAL,C) \ do { \ unsigned8 alu8addcc_val = (VAL); \ unsigned8 alu8addcc_c = (C); \ alu8_cr += (unsigned)(unsigned8)alu8addcc_val + alu8addcc_c; \ alu8_vr += (signed)(signed8)(alu8addcc_val) + alu8addcc_c; \ } while (0) #define ALU16_ADDC_C(VAL,C) \ do { \ unsigned16 alu16addcc_val = (VAL); \ unsigned16 alu16addcc_c = (C); \ alu16_cr += (unsigned)(unsigned16)alu16addcc_val + alu16addcc_c; \ alu16_vr += (signed)(signed16)(alu16addcc_val) + alu16addcc_c; \ } while (0) #define ALU32_ADDC_C(VAL,C) \ do { \ unsigned32 alu32addcc_val = (VAL); \ unsigned32 alu32addcc_c = (C); \ unsigned32 alu32addcc_sign = (alu32addcc_val ^ alu32_r); \ alu32_r += (alu32addcc_val + alu32addcc_c); \ alu32_c = ((alu32_r < alu32addcc_val) \ || (alu32addcc_c && alu32_r == alu32addcc_val)); \ alu32_v = ((alu32addcc_sign ^ - (unsigned32)alu32_c) ^ alu32_r) >> 31;\ } while (0) #define ALU64_ADDC_C(VAL,C) \ do { \ unsigned64 alu64addcc_val = (VAL); \ unsigned64 alu64addcc_c = (C); \ unsigned64 alu64addcc_sign = (alu64addcc_val ^ alu64_r); \ alu64_r += (alu64addcc_val + alu64addcc_c); \ alu64_c = ((alu64_r < alu64addcc_val) \ || (alu64addcc_c && alu64_r == alu64addcc_val)); \ alu64_v = ((alu64addcc_sign ^ - (unsigned64)alu64_c) ^ alu64_r) >> 63;\ } while (0) #define ALU_ADDC_C XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_ADDC_C) /* Basic operation - subtract (overflowing) */ #define ALU8_SUB(VAL) \ do { \ unsigned8 alu8sub_val = (VAL); \ ALU8_ADDC_C (~alu8sub_val, 1); \ } while (0) #define ALU16_SUB(VAL) \ do { \ unsigned16 alu16sub_val = (VAL); \ ALU16_ADDC_C (~alu16sub_val, 1); \ } while (0) #define ALU32_SUB(VAL) \ do { \ unsigned32 alu32sub_val = (VAL); \ ALU32_ADDC_C (~alu32sub_val, 1); \ } while (0) #define ALU64_SUB(VAL) \ do { \ unsigned64 alu64sub_val = (VAL); \ ALU64_ADDC_C (~alu64sub_val, 1); \ } while (0) #define ALU_SUB XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_SUB) /* Basic operation - subtract carrying (and overflowing) */ #define ALU8_SUBC(VAL) \ do { \ unsigned8 alu8subc_val = (VAL); \ ALU8_ADDC_C (~alu8subc_val, 1); \ } while (0) #define ALU16_SUBC(VAL) \ do { \ unsigned16 alu16subc_val = (VAL); \ ALU16_ADDC_C (~alu16subc_val, 1); \ } while (0) #define ALU32_SUBC(VAL) \ do { \ unsigned32 alu32subc_val = (VAL); \ ALU32_ADDC_C (~alu32subc_val, 1); \ } while (0) #define ALU64_SUBC(VAL) \ do { \ unsigned64 alu64subc_val = (VAL); \ ALU64_ADDC_C (~alu64subc_val, 1); \ } while (0) #define ALU_SUBC XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_SUBC) /* Compound operation - subtract carrying (and overflowing), extended */ #define ALU8_SUBC_X(VAL,C) \ do { \ unsigned8 alu8subcx_val = (VAL); \ unsigned8 alu8subcx_c = (C); \ ALU8_ADDC_C (~alu8subcx_val, alu8subcx_c); \ } while (0) #define ALU16_SUBC_X(VAL,C) \ do { \ unsigned16 alu16subcx_val = (VAL); \ unsigned16 alu16subcx_c = (C); \ ALU16_ADDC_C (~alu16subcx_val, alu16subcx_c); \ } while (0) #define ALU32_SUBC_X(VAL,C) \ do { \ unsigned32 alu32subcx_val = (VAL); \ unsigned32 alu32subcx_c = (C); \ ALU32_ADDC_C (~alu32subcx_val, alu32subcx_c); \ } while (0) #define ALU64_SUBC_X(VAL,C) \ do { \ unsigned64 alu64subcx_val = (VAL); \ unsigned64 alu64subcx_c = (C); \ ALU64_ADDC_C (~alu64subcx_val, alu64subcx_c); \ } while (0) #define ALU_SUBC_X XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_SUBC_X) /* Basic operation - subtract borrowing (and overflowing) */ #define ALU8_SUBB(VAL) \ do { \ unsigned8 alu8subb_val = (VAL); \ alu8_cr -= (unsigned)(unsigned8)alu8subb_val; \ alu8_vr -= (signed)(signed8)alu8subb_val; \ } while (0) #define ALU16_SUBB(VAL) \ do { \ unsigned16 alu16subb_val = (VAL); \ alu16_cr -= (unsigned)(unsigned16)alu16subb_val; \ alu16_vr -= (signed)(signed16)alu16subb_val; \ } while (0) #define ALU32_SUBB(VAL) \ do { \ unsigned32 alu32subb_val = (VAL); \ unsigned32 alu32subb_sign = alu32subb_val ^ alu32_r; \ alu32_c = (alu32_r < alu32subb_val); \ alu32_r -= (alu32subb_val); \ alu32_v = ((alu32subb_sign ^ - (unsigned32)alu32_c) ^ alu32_r) >> 31; \ } while (0) #define ALU64_SUBB(VAL) \ do { \ unsigned64 alu64subb_val = (VAL); \ unsigned64 alu64subb_sign = alu64subb_val ^ alu64_r; \ alu64_c = (alu64_r < alu64subb_val); \ alu64_r -= (alu64subb_val); \ alu64_v = ((alu64subb_sign ^ - (unsigned64)alu64_c) ^ alu64_r) >> 31; \ } while (0) #define ALU_SUBB XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_SUBB) /* Compound operation - subtract borrowing (and overflowing) with borrow-in */ #define ALU8_SUBB_B(VAL,B) \ do { \ unsigned8 alu8subbb_val = (VAL); \ unsigned8 alu8subbb_b = (B); \ alu8_cr -= (unsigned)(unsigned8)alu8subbb_val; \ alu8_cr -= (unsigned)(unsigned8)alu8subbb_b; \ alu8_vr -= (signed)(signed8)alu8subbb_val + alu8subbb_b; \ } while (0) #define ALU16_SUBB_B(VAL,B) \ do { \ unsigned16 alu16subbb_val = (VAL); \ unsigned16 alu16subbb_b = (B); \ alu16_cr -= (unsigned)(unsigned16)alu16subbb_val; \ alu16_cr -= (unsigned)(unsigned16)alu16subbb_b; \ alu16_vr -= (signed)(signed16)alu16subbb_val + alu16subbb_b; \ } while (0) #define ALU32_SUBB_B(VAL,B) \ do { \ unsigned32 alu32subbb_val = (VAL); \ unsigned32 alu32subbb_b = (B); \ ALU32_ADDC_C (~alu32subbb_val, !alu32subbb_b); \ alu32_c = !alu32_c; \ } while (0) #define ALU64_SUBB_B(VAL,B) \ do { \ unsigned64 alu64subbb_val = (VAL); \ unsigned64 alu64subbb_b = (B); \ ALU64_ADDC_C (~alu64subbb_val, !alu64subbb_b); \ alu64_c = !alu64_c; \ } while (0) #define ALU_SUBB_B XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_SUBB_B) /* Basic operation - negate (overflowing) */ #define ALU8_NEG() \ do { \ signed alu8neg_val = (ALU8_RESULT); \ ALU8_SET (1); \ ALU8_ADDC (~alu8neg_val); \ } while (0) #define ALU16_NEG() \ do { \ signed alu16neg_val = (ALU16_RESULT); \ ALU16_SET (1); \ ALU16_ADDC (~alu16neg_val); \ } while (0) #define ALU32_NEG() \ do { \ unsigned32 alu32neg_val = (ALU32_RESULT); \ ALU32_SET (1); \ ALU32_ADDC (~alu32neg_val); \ } while(0) #define ALU64_NEG() \ do { \ unsigned64 alu64neg_val = (ALU64_RESULT); \ ALU64_SET (1); \ ALU64_ADDC (~alu64neg_val); \ } while (0) #define ALU_NEG XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_NEG) /* Basic operation - negate carrying (and overflowing) */ #define ALU8_NEGC() \ do { \ signed alu8negc_val = (ALU8_RESULT); \ ALU8_SET (1); \ ALU8_ADDC (~alu8negc_val); \ } while (0) #define ALU16_NEGC() \ do { \ signed alu16negc_val = (ALU16_RESULT); \ ALU16_SET (1); \ ALU16_ADDC (~alu16negc_val); \ } while (0) #define ALU32_NEGC() \ do { \ unsigned32 alu32negc_val = (ALU32_RESULT); \ ALU32_SET (1); \ ALU32_ADDC (~alu32negc_val); \ } while(0) #define ALU64_NEGC() \ do { \ unsigned64 alu64negc_val = (ALU64_RESULT); \ ALU64_SET (1); \ ALU64_ADDC (~alu64negc_val); \ } while (0) #define ALU_NEGC XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_NEGC) /* Basic operation - negate borrowing (and overflowing) */ #define ALU8_NEGB() \ do { \ signed alu8negb_val = (ALU8_RESULT); \ ALU8_SET (0); \ ALU8_SUBB (alu8negb_val); \ } while (0) #define ALU16_NEGB() \ do { \ signed alu16negb_val = (ALU16_RESULT); \ ALU16_SET (0); \ ALU16_SUBB (alu16negb_val); \ } while (0) #define ALU32_NEGB() \ do { \ unsigned32 alu32negb_val = (ALU32_RESULT); \ ALU32_SET (0); \ ALU32_SUBB (alu32negb_val); \ } while(0) #define ALU64_NEGB() \ do { \ unsigned64 alu64negb_val = (ALU64_RESULT); \ ALU64_SET (0); \ ALU64_SUBB (alu64negb_val); \ } while (0) #define ALU_NEGB XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_NEGB) /* Other */ #define ALU8_OR(VAL) \ do { \ error("ALU16_OR"); \ } while (0) #define ALU16_OR(VAL) \ do { \ error("ALU16_OR"); \ } while (0) #define ALU32_OR(VAL) \ do { \ alu32_r |= (VAL); \ alu32_c = 0; \ alu32_v = 0; \ } while (0) #define ALU64_OR(VAL) \ do { \ alu64_r |= (VAL); \ alu64_c = 0; \ alu64_v = 0; \ } while (0) #define ALU_OR(VAL) XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_OR)(VAL) #define ALU16_XOR(VAL) \ do { \ error("ALU16_XOR"); \ } while (0) #define ALU32_XOR(VAL) \ do { \ alu32_r ^= (VAL); \ alu32_c = 0; \ alu32_v = 0; \ } while (0) #define ALU64_XOR(VAL) \ do { \ alu64_r ^= (VAL); \ alu64_c = 0; \ alu64_v = 0; \ } while (0) #define ALU_XOR(VAL) XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_XOR)(VAL) #define ALU16_AND(VAL) \ do { \ error("ALU_AND16"); \ } while (0) #define ALU32_AND(VAL) \ do { \ alu32_r &= (VAL); \ alu32_r = 0; \ alu32_v = 0; \ } while (0) #define ALU64_AND(VAL) \ do { \ alu64_r &= (VAL); \ alu64_r = 0; \ alu64_v = 0; \ } while (0) #define ALU_AND(VAL) XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_AND)(VAL) #define ALU16_NOT(VAL) \ do { \ error("ALU_NOT16"); \ } while (0) #define ALU32_NOT \ do { \ alu32_r = ~alu32_r; \ alu32_c = 0; \ alu32_v = 0; \ } while (0) #define ALU64_NOT \ do { \ alu64_r = ~alu64_r; \ alu64_c = 0; \ alu64_v = 0; \ } while (0) #define ALU_NOT XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_NOT) #endif
Go to most recent revision | Compare with Previous | Blame | View Log