URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [branches/] [oc/] [gdb-5.0/] [sim/] [i960/] [mloop.in] - Rev 106
Go to most recent revision | Compare with Previous | Blame | View Log
# Simulator main loop for i960. -*- C -*-
# Copyright (C) 1996, 1997, 1998, 1999 Free Software Foundation, Inc.
#
# This file is part of the GNU Simulators.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License along
# with this program; if not, write to the Free Software Foundation, Inc.,
# 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# Syntax:
# /bin/sh mainloop.in command
#
# Command is one of:
#
# init
# support
# extract-{simple,scache,pbb}
# {full,fast}-exec-{simple,scache,pbb}
#
# A target need only provide a "full" version of one of simple,scache,pbb.
# If the target wants it can also provide a fast version of same.
# It can't provide more than this, however for illustration's sake the M32R
# port provides examples of all.
# ??? After a few more ports are done, revisit.
# Will eventually need to machine generate a lot of this.
case "x$1" in
xsupport)
cat <<EOF
/*static INLINE*/ const IDESC *
extract32 (SIM_CPU *current_cpu, PCADDR pc, CGEN_INSN_INT insn,
ARGBUF *abuf, int fast_p)
{
/* ??? wilson, instructions are 32 bits. */
const IDESC *d = @cpu@_decode (current_cpu, pc, (USI) insn, abuf);
@cpu@_fill_argbuf (current_cpu, abuf, d, pc, fast_p);
if (! fast_p)
{
int trace_p = PC_IN_TRACE_RANGE_P (current_cpu, pc);
int profile_p = PC_IN_PROFILE_RANGE_P (current_cpu, pc);
@cpu@_fill_argbuf_tp (current_cpu, abuf, trace_p, profile_p);
}
return d;
}
#if 0
/*static INLINE*/ const IDESC *
/* ??? wilson, Some instructions are 64 bits. */
extract64 (SIM_CPU *current_cpu, PCADDR pc, insn_t insn,
ARGBUF *abuf, int fast_p)
{
const IDESC *d = @cpu@_decode (current_cpu, pc, (UDI) insn >> 32, abuf);
SEM_SET_CODE (abuf, d, fast_p);
abuf->idesc = d;
abuf->addr = pc;
return d;
}
#endif
static INLINE SEM_PC
execute (SIM_CPU *current_cpu, SCACHE *sc, int fast_p)
{
SEM_PC vpc;
if (fast_p)
{
#if ! WITH_SEM_SWITCH_FAST
#if WITH_SCACHE
vpc = (*sc->argbuf.semantic.sem_fast) (current_cpu, sc);
#else
vpc = (*sc->argbuf.semantic.sem_fast) (current_cpu, &sc->argbuf);
#endif
#else
abort ();
#endif /* WITH_SEM_SWITCH_FAST */
}
else
{
#if ! WITH_SEM_SWITCH_FULL
ARGBUF *abuf = &sc->argbuf;
const IDESC *idesc = abuf->idesc;
const CGEN_INSN *insn = idesc->idata;
#if WITH_SCACHE_PBB
int virtual_p = CGEN_INSN_ATTR_VALUE (insn, CGEN_INSN_VIRTUAL);
#else
int virtual_p = 0;
#endif
if (! virtual_p)
{
/* FIXME: call x-before */
if (ARGBUF_PROFILE_P (abuf))
PROFILE_COUNT_INSN (current_cpu, abuf->addr, idesc->num);
/* FIXME: Later make cover macros: PROFILE_INSN_{INIT,FINI}. */
if (PROFILE_MODEL_P (current_cpu))
@cpu@_model_insn_before (current_cpu, 1 /*first_p*/);
TRACE_INSN_INIT (current_cpu, abuf, 1);
TRACE_INSN (current_cpu, insn,
(const struct argbuf *) abuf, abuf->addr);
}
#if WITH_SCACHE
vpc = (*sc->argbuf.semantic.sem_full) (current_cpu, sc);
#else
vpc = (*sc->argbuf.semantic.sem_full) (current_cpu, abuf);
#endif
if (! virtual_p)
{
/* FIXME: call x-after */
if (PROFILE_MODEL_P (current_cpu))
{
int cycles;
cycles = (*idesc->timing->model_fn) (current_cpu, sc);
@cpu@_model_insn_after (current_cpu, 1 /*last_p*/, cycles);
}
TRACE_INSN_FINI (current_cpu, abuf, 1);
}
#else
abort ();
#endif /* WITH_SEM_SWITCH_FULL */
}
return vpc;
}
EOF
;;
xinit)
cat <<EOF
/*xxxinit*/
EOF
;;
xextract-simple | xextract-scache)
cat <<EOF
{
if ((pc & 3) != 0)
{
abort ();
#if 0
/* This only occurs when single stepping.
The test is unnecessary otherwise, but the cost is teensy,
compared with decoding/extraction. */
UHI insn = GETIMEMUHI (current_cpu, pc);
extract16 (current_cpu, pc, insn & 0x7fff, sc, FAST_P);
#endif
}
else
{
USI insn = GETIMEMUSI (current_cpu, pc);
/* ??? wilson, insns are 32 bits, unless MEMB with displacement, which
has high bit set, bit 12 set, and mode of 5, 12, 13, 14, or 15. */
if (((SI) insn > 0)
|| ! (((insn & 0x3000) == 0x3000)
|| ((insn & 0x3C00) == 0x1400)))
{
extract32 (current_cpu, pc, insn, sc, FAST_P);
}
else
{
UDI llinsn = (((UDI) insn << 32) || GETIMEMUSI (current_cpu, pc+4));
extract64 (current_cpu, pc, llinsn, sc, FAST_P);
}
}
}
EOF
;;
xextract-pbb)
# Inputs: current_cpu, pc, sc, max_insns, FAST_P
# Outputs: sc, pc
# sc must be left pointing past the last created entry.
# pc must be left pointing past the last created entry.
# If the pbb is terminated by a cti insn, SET_CTI_VPC(sc) must be called
# to record the vpc of the cti insn.
# SET_INSN_COUNT(n) must be called to record number of real insns.
cat <<EOF
{
const IDESC *idesc;
int icount = 0;
if ((pc & 3) != 0)
{
abort ();
#if 0
/* This only occurs when single stepping.
The test is unnecessary otherwise, but the cost is teensy,
compared with decoding/extraction. */
UHI insn = GETIMEMUHI (current_cpu, pc);
idesc = extract16 (current_cpu, pc, insn & 0x7fff, &sc->argbuf, FAST_P);
++sc;
--max_insns;
++icount;
pc += 2;
if (IDESC_CTI_P (idesc))
{
SET_CTI_VPC (sc - 1);
goto Finish;
}
#endif
}
while (max_insns > 0)
{
USI insn = GETIMEMUSI (current_cpu, pc);
#if 0
/* ??? wilson, insns are 32 bits, unless MEMB with displacement, which
has high bit set, bit 12 set, and mode of 5, 12, 13, 14, or 15. */
if (((SI) insn > 0)
|| ! (((insn & 0x3000) == 0x3000)
|| ((insn & 0x3C00) == 0x1400)))
{
idesc = extract32 (current_cpu, pc, insn, &sc->argbuf, FAST_P);
++sc;
--max_insns;
++icount;
pc += 4;
if (IDESC_CTI_P (idesc))
{
SET_CTI_VPC (sc - 1);
break;
}
}
else
{
idesc = extract64 (current_cpu, pc, insn, &sc->argbuf, FAST_P);
++sc;
--max_insns;
++icount;
pc += 8;
if (IDESC_CTI_P (idesc))
{
SET_CTI_VPC (sc - 1);
break;
}
}
#else
idesc = extract32 (current_cpu, pc, insn, &sc->argbuf, FAST_P);
++sc;
--max_insns;
++icount;
pc += idesc->length;
if (IDESC_CTI_P (idesc))
{
SET_CTI_VPC (sc - 1);
break;
}
}
#endif
Finish:
SET_INSN_COUNT (icount);
}
EOF
;;
xfull-exec-* | xfast-exec-*)
# Inputs: current_cpu, vpc, FAST_P
# Outputs: vpc
# vpc is the virtual program counter.
cat <<EOF
#if (! FAST_P && WITH_SEM_SWITCH_FULL) || (FAST_P && WITH_SEM_SWITCH_FAST)
#define DEFINE_SWITCH
#include "sem-switch.c"
#else
vpc = execute (current_cpu, vpc, FAST_P);
#endif
EOF
;;
*)
echo "Invalid argument to mainloop.in: $1" >&2
exit 1
;;
esac
Go to most recent revision | Compare with Previous | Blame | View Log