OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [branches/] [stable_0_1_x/] [or1ksim/] [peripheral/] [Makefile.in] - Rev 1771

Go to most recent revision | Compare with Previous | Blame | View Log

# Makefile.in generated by automake 1.6.3 from Makefile.am.
# @configure_input@

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Makefile -- Makefile for peripherals simulation
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@

EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
AMTAR = @AMTAR@
AR = @AR@
ARFLAGS = @ARFLAGS@
AWK = @AWK@
BUILD_DIR = @BUILD_DIR@
CC = @CC@
CFLAGS = @CFLAGS@
CPU_ARCH = @CPU_ARCH@
DEPDIR = @DEPDIR@
INCLUDES = @INCLUDES@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LOCAL_CFLAGS = @LOCAL_CFLAGS@
LOCAL_DEFS = @LOCAL_DEFS@
MAKE_SHELL = @MAKE_SHELL@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
STRIP = @STRIP@
SUMVERSION = @SUMVERSION@
TERMCAP_LIB = @TERMCAP_LIB@
VERSION = @VERSION@
am__include = @am__include@
am__quote = @am__quote@
host = @host@
host_cpu = @host_cpu@
host_os = @host_os@
install_sh = @install_sh@

SUBDIRS = channels

noinst_LIBRARIES = libperipheral.a
libperipheral_a_SOURCES = \
16450.c                   \
dma.c                     \
mc.c                      \
eth.c                     \
crc32.c                   \
gpio.c                    \
vga.c                     \
fb.c                      \
ps2kbd.c                  \
atahost.c                 \
atadevice.c               \
atadevice_cmdi.c          \
test.c

subdir = peripheral
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)

libperipheral_a_AR = $(AR) cru
libperipheral_a_LIBADD =
am_libperipheral_a_OBJECTS = 16450.$(OBJEXT) dma.$(OBJEXT) mc.$(OBJEXT) \
        eth.$(OBJEXT) crc32.$(OBJEXT) gpio.$(OBJEXT) vga.$(OBJEXT) \
        fb.$(OBJEXT) ps2kbd.$(OBJEXT) atahost.$(OBJEXT) \
        atadevice.$(OBJEXT) atadevice_cmdi.$(OBJEXT) test.$(OBJEXT)
libperipheral_a_OBJECTS = $(am_libperipheral_a_OBJECTS)

DEFS = @DEFS@
DEFAULT_INCLUDES =  -I. -I$(srcdir) -I$(top_builddir)
CPPFLAGS = @CPPFLAGS@
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/16450.Po ./$(DEPDIR)/atadevice.Po \
@AMDEP_TRUE@    ./$(DEPDIR)/atadevice_cmdi.Po \
@AMDEP_TRUE@    ./$(DEPDIR)/atahost.Po ./$(DEPDIR)/crc32.Po \
@AMDEP_TRUE@    ./$(DEPDIR)/dma.Po ./$(DEPDIR)/eth.Po \
@AMDEP_TRUE@    ./$(DEPDIR)/fb.Po ./$(DEPDIR)/gpio.Po \
@AMDEP_TRUE@    ./$(DEPDIR)/mc.Po ./$(DEPDIR)/ps2kbd.Po \
@AMDEP_TRUE@    ./$(DEPDIR)/test.Po ./$(DEPDIR)/vga.Po
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
DIST_SOURCES = $(libperipheral_a_SOURCES)

RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
        uninstall-info-recursive all-recursive install-data-recursive \
        install-exec-recursive installdirs-recursive install-recursive \
        uninstall-recursive check-recursive installcheck-recursive
DIST_COMMON = Makefile.am Makefile.in
DIST_SUBDIRS = $(SUBDIRS)
SOURCES = $(libperipheral_a_SOURCES)

all: all-recursive

.SUFFIXES:
.SUFFIXES: .c .o .obj
$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
        cd $(top_srcdir) && \
          $(AUTOMAKE) --gnu  peripheral/Makefile
Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
        cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)

clean-noinstLIBRARIES:
        -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
libperipheral.a: $(libperipheral_a_OBJECTS) $(libperipheral_a_DEPENDENCIES) 
        -rm -f libperipheral.a
        $(libperipheral_a_AR) libperipheral.a $(libperipheral_a_OBJECTS) $(libperipheral_a_LIBADD)
        $(RANLIB) libperipheral.a

mostlyclean-compile:
        -rm -f *.$(OBJEXT) core *.core

distclean-compile:
        -rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/16450.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atadevice.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atadevice_cmdi.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atahost.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crc32.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dma.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eth.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fb.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpio.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ps2kbd.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vga.Po@am__quote@

distclean-depend:
        -rm -rf ./$(DEPDIR)

.c.o:
@AMDEP_TRUE@    source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@    depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
@AMDEP_TRUE@    $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
        $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<

.c.obj:
@AMDEP_TRUE@    source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@    depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
@AMDEP_TRUE@    $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
        $(COMPILE) -c `cygpath -w $<`
CCDEPMODE = @CCDEPMODE@
uninstall-info-am:

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
        @set fnord $$MAKEFLAGS; amf=$$2; \
        dot_seen=no; \
        target=`echo $@ | sed s/-recursive//`; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            dot_seen=yes; \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
        done; \
        if test "$$dot_seen" = "no"; then \
          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
        fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
        @set fnord $$MAKEFLAGS; amf=$$2; \
        dot_seen=no; \
        case "$@" in \
          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
          *) list='$(SUBDIRS)' ;; \
        esac; \
        rev=''; for subdir in $$list; do \
          if test "$$subdir" = "."; then :; else \
            rev="$$subdir $$rev"; \
          fi; \
        done; \
        rev="$$rev ."; \
        target=`echo $@ | sed s/-recursive//`; \
        for subdir in $$rev; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
        done && test -z "$$fail"
tags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
        done

ETAGS = etags
ETAGSFLAGS =

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '    { files[$$0] = 1; } \
               END { for (i in files) print i; }'`; \
        mkid -fID $$unique

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
        tags=; \
        here=`pwd`; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
          fi; \
        done; \
        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '    { files[$$0] = 1; } \
               END { for (i in files) print i; }'`; \
        test -z "$(ETAGS_ARGS)$$tags$$unique" \
          || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
             $$tags $$unique

GTAGS:
        here=`$(am__cd) $(top_builddir) && pwd` \
          && cd $(top_srcdir) \
          && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
        @list='$(DISTFILES)'; for file in $$list; do \
          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
          dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
          if test "$$dir" != "$$file" && test "$$dir" != "."; then \
            dir="/$$dir"; \
            $(mkinstalldirs) "$(distdir)$$dir"; \
          else \
            dir=''; \
          fi; \
          if test -d $$d/$$file; then \
            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
              cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
            fi; \
            cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
          else \
            test -f $(distdir)/$$file \
            || cp -p $$d/$$file $(distdir)/$$file \
            || exit 1; \
          fi; \
        done
        list='$(SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test -d $(distdir)/$$subdir \
            || mkdir $(distdir)/$$subdir \
            || exit 1; \
            (cd $$subdir && \
              $(MAKE) $(AM_MAKEFLAGS) \
                top_distdir="$(top_distdir)" \
                distdir=../$(distdir)/$$subdir \
                distdir) \
              || exit 1; \
          fi; \
        done
check-am: all-am
check: check-recursive
all-am: Makefile $(LIBRARIES)
installdirs: installdirs-recursive
installdirs-am:

install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
          INSTALL_STRIP_FLAG=-s \
          `test -z '$(STRIP)' || \
            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
        -rm -f Makefile $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
        @echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am

distclean: distclean-recursive

distclean-am: clean-am distclean-compile distclean-depend \
        distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

info: info-recursive

info-am:

install-data-am:

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic

uninstall-am: uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
        clean-generic clean-noinstLIBRARIES clean-recursive distclean \
        distclean-compile distclean-depend distclean-generic \
        distclean-recursive distclean-tags distdir dvi dvi-am \
        dvi-recursive info info-am info-recursive install install-am \
        install-data install-data-am install-data-recursive \
        install-exec install-exec-am install-exec-recursive \
        install-info install-info-am install-info-recursive install-man \
        install-recursive install-strip installcheck installcheck-am \
        installdirs installdirs-am installdirs-recursive \
        maintainer-clean maintainer-clean-generic \
        maintainer-clean-recursive mostlyclean mostlyclean-compile \
        mostlyclean-generic mostlyclean-recursive tags tags-recursive \
        uninstall uninstall-am uninstall-info-am \
        uninstall-info-recursive uninstall-recursive

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.