Subversion Repositories or1k

/*
    atahost.h -- ATA Host code simulation
    Copyright (C) 2002 Richard Herveille, rherveille@opencores.org
 
    This file is part of OpenRISC 1000 Architectural Simulator
 
    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version
 
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
 
    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
 
/*
 * Definitions for the Opencores ATA Host Controller Core
 */
 
#ifndef __OR1KSIM_ATAH_H
#define __OR1KSIM_ATAH_H
 
#include "atadevice.h"
 
/* --- Register definitions --- */
 
/* ----- Core Registers                                              */
#define ATA_CTRL  0x00         /* Control register                   */
#define ATA_STAT  0x04         /* Status register                    */
#define ATA_PCTR  0x08         /* PIO command timing register        */
#define ATA_PFTR0 0x0c         /* PIO Fast Timing register Device0   */
#define ATA_PFTR1 0x10         /* PIO Fast Timing register Device1   */
#define ATA_DTR0  0x14         /* DMA Timing register Device2        */
#define ATA_DTR1  0x18         /* DMA Timing register Device1        */
#define ATA_TXB   0x3c         /* DMA Transmit buffer                */
#define ATA_RXB   0x3c         /* DMA Receive buffer                 */
 
 
/* ----------------------------                                       */
/* ----- Bits definitions -----                                       */
/* ----------------------------                                       */
 
/* ----- Core Control register                                        */
                                /* bits 31-16 are reserved            */
#define ATA_DMA_EN  (0<<15)     /* DMAen, DMA enable bit              */
                                /* bit 14 is reserved                 */
#define ATA_DMA_WR  (1<<14)     /* DMA Write transaction              */
#define ATA_DMA_RD  (0<<14)     /* DMA Read transaction               */
                                /* bits 13-10 are reserved            */
#define ATA_BELEC1  (1<< 9)     /* Big-Little endian conversion       */
                                /* enable bit for Device1             */
#define ATA_BELEC0  (1<< 8)     /* Big-Little endian conversion       */
                                /* enable bit for Device0             */
#define ATA_IDE_EN  (1<< 7)     /* IDE core enable bit                */
#define ATA_FTE1    (1<< 6)     /* Device1 Fast PIO Timing Enable bit */
#define ATA_FTE0    (1<< 5)     /* Device0 Fast PIO Timing Enable bit */
#define ATA_PWPP    (1<< 4)     /* PIO Write Ping-Pong Enable bit     */
#define ATA_IORDY_FTE1 (1<< 3)  /* Device1 Fast PIO Timing IORDY      */
                                /* enable bit                         */
#define ATA_IORDY_FTE0 (1<< 2)  /* Device0 Fast PIO Timing IORDY      */
                                /* enable bit                         */
#define ATA_IORDY   (1<< 1)     /* PIO Command Timing IORDY enable bit*/
#define ATA_RST     (1<< 0)     /* ATA Reset bit                      */
 
/* ----- Core Status register                                         */
#define ATA_DEVID   0xf0000000  /* bits 31-28 Device-ID               */
#define ATA_REVNO   0x0f000000  /* bits 27-24 Revision number         */
                                /* bits 23-16 are reserved            */
#define ATA_DMA_TIP (1<<15)     /* DMA Transfer in progress           */
                                /* bits 14-10 are reserved            */
#define ATA_DRBE    (1<<10)     /* DMA Receive buffer empty           */
#define ATA_DTBF    (1<< 9)     /* DMA Transmit buffer full           */
#define ATA_DMARQ   (1<< 8)     /* DMARQ Line status                  */
#define ATA_PIO_TIP (1<< 7      /* PIO Transfer in progress           */
#define ATA_PWPPF   (1<< 6)     /* PIO write ping-pong full           */
                                /* bits 5-1 are reserved              */
#define ATA_IDEIS  (1<< 0)      /* IDE Interrupt status               */
 
 
/* -----  Core Timing registers                                       */
#define ATA_TEOC       24       /* End of cycle time          DMA/PIO */
#define ATA_T4         16       /* DIOW- data hold time           PIO */
#define ATA_T2          8       /* DIOR-/DIOW- pulse width        PIO */
#define ATA_TD          8       /* DIOR-/DIOW- pulse width        DMA */
#define ATA_T1          0       /* Address valid to DIOR-/DIOW-   PIO */
#define ATA_TM          0       /* CS[1:0]valid to DIOR-/DIOW-    DMA */
 
 
/* -----------------------------                                      */
/* ----- Simulator defines -----                                      */
/* -----------------------------                                      */
#define ATA_ADDR_SPACE 0x80
 
 
/* ----------------------------                                       */
/* ----- Structs          -----                                       */
/* ----------------------------                                       */
typedef struct{
	/* Base address in memory                                     */
	oraddr_t baseaddr;
 
	/* Which IRQ to generate                                      */
	int irq;
 
	/* Which ATA host is this?                                    */
	unsigned ata_number;
 
	/* ata host registers                                         */
	struct {
		int ctrl;
		int stat;
		int pctr;
		int pftr0;
		int pftr1;
		int dtr0;
		int dtr1;
		int txb;
		int rxb;
	} regs;
 
	/* connected ATA devices (slaves)                             */
	ata_devices devices;
} ata_host;
 
/* ----------------------------                                       */
/* ----- Prototypes       -----                                       */
/* ----------------------------                                       */
void ata_reset(void);
uint32_t ata_read32( oraddr_t addr );
void ata_write32( oraddr_t addr, uint32_t value );
void ata_status(void);
 
 
/* ----------------------------                                       */
/* ----- Macros           -----                                       */
/* ----------------------------                                       */
#define is_ata_hostadr(adr) (!(adr & 0x40))
 
// FIXME
#define ata_pio_delay(pioreg) ( (((pioreg >> ATA_T1) & 0xff) +1) + (((pioreg >> ATA_T2) & 0xff) +1) + (((pioreg >> ATA_T4) & 0xff) +1) +1 )
#define ata_dma_delay(dmareg) ( (((dmareg >> ATA_TD) & 0xff) +1) + (((pioreg >> ATA_TM) & 0xff) +1) +1 )
 
#endif