Subversion Repositories or1k

/* gpio.h -- GPIO code simulation
   Copyright (C) 2001 Erez Volk, erez@mailandnews.comopencores.org
 
   This file is part of OpenRISC 1000 Architectural Simulator.
 
   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.
 
   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.
 
   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <string.h>
 
#include "config.h"
 
#ifdef HAVE_INTTYPES_H
#include <inttypes.h>
#endif
 
#include "port.h"
#include "arch.h"
#include "abstract.h"
#include "gpio.h"
#include "gpio_i.h"
#include "sim-config.h"
#include "pic.h"
#include "vapi.h"
#include "debug.h"
#include "sched.h"
 
static void gpio_vapi_read( unsigned long id, unsigned long data, void *dat );
static uint32_t gpio_read32( oraddr_t addr, void *dat );
static void gpio_write32( oraddr_t addr, uint32_t value, void *dat );
 
static void gpio_external_clock( unsigned long value, struct gpio_device *gpio );
static void gpio_device_clock( struct gpio_device *gpio );
 
/* Initialize all parameters and state */
void gpio_reset( void *dat )
{
  struct gpio_device *gpio = dat;
 
  if ( gpio->baseaddr != 0 ) {
    /* Possibly connect to VAPI */
    if ( gpio->base_vapi_id ) {
      vapi_install_multi_handler( gpio->base_vapi_id, GPIO_NUM_VAPI_IDS, gpio_vapi_read, dat );
    }
  }
}
 
 
/* Dump status */
void gpio_status( void *dat )
{
  struct gpio_device *gpio = dat;
 
  if ( gpio->baseaddr == 0 )
    return;
 
  PRINTF( "\nGPIO at 0x%"PRIxADDR":\n", gpio->baseaddr );
  PRINTF( "RGPIO_IN     : 0x%08lX\n", gpio->curr.in );
  PRINTF( "RGPIO_OUT    : 0x%08lX\n", gpio->curr.out );
  PRINTF( "RGPIO_OE     : 0x%08lX\n", gpio->curr.oe );
  PRINTF( "RGPIO_INTE   : 0x%08lX\n", gpio->curr.inte );
  PRINTF( "RGPIO_PTRIG  : 0x%08lX\n", gpio->curr.ptrig );
  PRINTF( "RGPIO_AUX    : 0x%08lX\n", gpio->curr.aux );
  PRINTF( "RGPIO_CTRL   : 0x%08lX\n", gpio->curr.ctrl );
  PRINTF( "RGPIO_INTS   : 0x%08lX\n", gpio->curr.ints );
}
 
 
/* Wishbone read */
uint32_t gpio_read32( oraddr_t addr, void *dat )
{
  struct gpio_device *gpio = dat;
 
  addr -= gpio->baseaddr;
 
  switch( addr ) {
  case RGPIO_IN: return gpio->curr.in | gpio->curr.out;
  case RGPIO_OUT: return gpio->curr.out;
  case RGPIO_OE: return gpio->curr.oe;
  case RGPIO_INTE: return gpio->curr.inte;
  case RGPIO_PTRIG: return gpio->curr.ptrig;
  case RGPIO_AUX: return gpio->curr.aux;
  case RGPIO_CTRL: return gpio->curr.ctrl;
  case RGPIO_INTS: return gpio->curr.ints;
  }
 
  return 0;
}
 
 
/* Wishbone write */
void gpio_write32( oraddr_t addr, uint32_t value, void *dat )
{
  struct gpio_device *gpio = dat;
 
  addr -= gpio->baseaddr;
 
  switch( addr ) {
  case RGPIO_IN: debug( 5, "GPIO: Cannot write to RGPIO_IN\n" ); break;
  case RGPIO_OUT: gpio->next.out = value; break;
  case RGPIO_OE: gpio->next.oe = value; break;
  case RGPIO_INTE: gpio->next.inte = value; break;
  case RGPIO_PTRIG: gpio->next.ptrig = value; break;
  case RGPIO_AUX: gpio->next.aux = value; break;
  case RGPIO_CTRL: gpio->next.ctrl = value; break;
  case RGPIO_INTS: gpio->next.ints = value; break;
  }
}
 
 
/* Input from "outside world" */
void gpio_vapi_read( unsigned long id, unsigned long data, void *dat )
{
  unsigned which;
  struct gpio_device *gpio = dat;
 
  debug( 5, "GPIO: id %08lx, data %08lx\n", id, data );
 
  which = id - gpio->base_vapi_id;
 
  switch( which ) {
  case GPIO_VAPI_DATA:
    debug( 4, "GPIO: Next input from VAPI = 0x%08lx (RGPIO_OE = 0x%08lx)\n",
           data, gpio->next.oe );
    gpio->next.in = data;
    break;
  case GPIO_VAPI_AUX:
    gpio->auxiliary_inputs = data;
    break;
  case GPIO_VAPI_RGPIO_OE:
    gpio->next.oe = data;
    break;
  case GPIO_VAPI_RGPIO_INTE:
    gpio->next.inte = data;
    break;
  case GPIO_VAPI_RGPIO_PTRIG:
    gpio->next.ptrig = data;
    break;
  case GPIO_VAPI_RGPIO_AUX:
    gpio->next.aux = data;
    break;
  case GPIO_VAPI_RGPIO_CTRL:
    gpio->next.ctrl = data;
    break;
  case GPIO_VAPI_CLOCK:
    gpio_external_clock( data, gpio );
    break;
  }
 
  /* Clock the device */
  if ( !(gpio->curr.ctrl & RGPIO_CTRL_ECLK) )
    gpio_device_clock( gpio );
}
 
/* External Clock. */
static void gpio_external_clock( unsigned long value, struct gpio_device *gpio )
{
  int use_external_clock = ((gpio->curr.ctrl & RGPIO_CTRL_ECLK) == RGPIO_CTRL_ECLK);
  int negative_edge = ((gpio->curr.ctrl & RGPIO_CTRL_NEC) == RGPIO_CTRL_NEC);
 
  /* "Normalize" clock value */
  value = (value != 0);
 
  gpio->next.external_clock = value;
 
  if ( use_external_clock && (gpio->next.external_clock != gpio->curr.external_clock) && (value != negative_edge) )
    /* Make sure that in vapi_read, we don't clock the device */
    if ( gpio->curr.ctrl & RGPIO_CTRL_ECLK )
      gpio_device_clock( gpio );
}
 
/* Report an interrupt to the sim */
void gpio_do_int( void *dat )
{
  struct gpio_device *gpio = dat;
 
  report_interrupt( gpio->irq );
}
 
/* Clock as handld by one device. */
static void gpio_device_clock( struct gpio_device *gpio )
{
  /* Calculate new inputs and outputs */
  gpio->next.in &= ~gpio->next.oe; /* Only input bits */
  /* Replace requested output bits with aux input */
  gpio->next.out = (gpio->next.out & ~gpio->next.aux) | (gpio->auxiliary_inputs & gpio->next.aux);
  gpio->next.out &= gpio->next.oe; /* Only output-enabled bits */
 
  /* If any outputs changed, notify the world (i.e. vapi) */
  if ( gpio->next.out != gpio->curr.out ) {
    debug( 4, "GPIO: New output 0x%08lx, RGPIO_OE = 0x%08lx\n", gpio->next.out, 
           gpio->next.oe );
    if ( gpio->base_vapi_id )
      vapi_send( gpio->base_vapi_id + GPIO_VAPI_DATA, gpio->next.out );
  }
 
  /* If any inputs changed and interrupt enabled, generate interrupt */
  if ( gpio->next.in != gpio->curr.in ) {
    debug( 4, "GPIO: New input 0x%08lx\n", gpio->next.in );
 
    if ( gpio->next.ctrl & RGPIO_CTRL_INTE ) {
      unsigned changed_bits = gpio->next.in ^ gpio->curr.in; /* inputs that have changed */
      unsigned set_bits = changed_bits & gpio->next.in; /* inputs that have been set */
      unsigned cleared_bits = changed_bits & gpio->curr.in; /* inputs that have been cleared */
      unsigned relevant_bits = (gpio->next.ptrig & set_bits) | (~gpio->next.ptrig & cleared_bits);
 
      if ( relevant_bits & gpio->next.inte ) {
	debug( 3, "GPIO: Reporting interrupt %d\n", gpio->irq );
	gpio->next.ctrl |= RGPIO_CTRL_INTS;
	gpio->next.ints |= relevant_bits & gpio->next.inte;
        /* Since we can't report an interrupt during a readmem/writemem
         * schedule the scheduler to do it.  Read the comment above
         * report_interrupt in pic/pic.c */
        SCHED_ADD( gpio_do_int, gpio, runtime.sim.cycles + 1 );
      }
    }
  }
 
  /* Switch to values for next clock */
  memcpy( &(gpio->curr), &(gpio->next), sizeof(gpio->curr) );
}
 
/*---------------------------------------------------[ GPIO configuration ]---*/
void gpio_baseaddr(union param_val val, void *dat)
{
  struct gpio_device *gpio = dat;
  gpio->baseaddr = val.addr_val;
}
 
void gpio_irq(union param_val val, void *dat)
{
  struct gpio_device *gpio = dat;
  gpio->irq = val.int_val;
}
 
void gpio_base_vapi_id(union param_val val, void *dat)
{
  struct gpio_device *gpio = dat;
  gpio->base_vapi_id = val.int_val;
}
 
void *gpio_sec_start(void)
{
  struct gpio_device *new = malloc(sizeof(struct gpio_device));
 
  if(!new) {
    fprintf(stderr, "Peripheral Test: Run out of memory\n");
    exit(-1);
  }
 
  new->auxiliary_inputs = 0;
  memset(&new->curr, 0, sizeof(new->curr));
  memset(&new->next, 0, sizeof(new->next));
 
  return new;
}
 
void gpio_sec_end(void *dat)
{
  struct gpio_device *gpio = dat;
 
  /* Register memory range */
  register_memoryarea( gpio->baseaddr, GPIO_ADDR_SPACE, 4, 0, gpio_read32, gpio_write32, dat );
 
  reg_sim_reset(gpio_reset, dat);
  reg_sim_stat(gpio_status, dat);
}
 
void reg_gpio_sec(void)
{
  struct config_section *sec = reg_config_sec("gpio", NULL, NULL);
 
  reg_config_param(sec, "baseaddr", paramt_addr, gpio_baseaddr);
  reg_config_param(sec, "irq", paramt_int, gpio_irq);
  reg_config_param(sec, "base_vapi_id", paramt_int, gpio_base_vapi_id);
}