Subversion Repositories or1k

/* default.cfg -- Simulator testbench default configuration script file
   Copyright (C) 2001, Marko Mlinar, markom@opencores.org

This file is part of OpenRISC 1000 Architectural Simulator.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */

section memory
  /*random_seed = 12345
  type = random*/
  pattern = 0x00
  type = unknown /* Fastest */
  
  nmemories = 2
  device 0
    name = "FLASH"
    ce = 0
    baseaddr = 0xf0000000
    size = 0x00200000
    delayr = 10
    delayw = -1
  enddevice
  
  device 1
    name = "RAM"
    ce = 1
    baseaddr = 0x00000000
    size = 0x00200000
    delayr = 2
    delayw = 4
  enddevice
end

section immu
  enabled = 1
  nsets = 64
  nways = 1
  ustates = 2
  pagesize = 8192
end

section dmmu
  enabled = 1
  nsets = 64
  nways = 1
  ustates = 2
  pagesize = 8192
end

section ic
  enabled = 1
  nsets = 256
  nways = 1
  ustates = 2
  blocksize = 16
end

section dc
  enabled = 1
  nsets = 256
  nways = 1
  ustates = 2
  blocksize = 16
end

section cpu
  ver = 0x1200
  rev = 0x0001
  /* upr = */
  superscalar = 0
  hazards = 0
  dependstats = 0
end

section bpb
  enabled = 0
  btic = 0
end

section debug
  /*enabled = 0
  gdb_enabled = 0*/
  server_port = 9999
end

section sim
  debug = 0 
  profile = 0
  prof_fn = "sim.profile"
  
  exe_log = 0
  exe_log_type = software
  exe_log_fn = "executed.log"
end

section mc
  enabled = 1
  baseaddr = 0x93000000
  POC = 0x00000008                 /* Power on configuration register */
end

section dma
  ndmas = 1
  device 0
    baseaddr = 0xB8000000
    irq = 4
  enddevice
end

section ethernet
  nethernets = 1
  
  device 0
    baseaddr = 0x92000000
    dma = 0
    irq = 15
    rtx_type = 0
    tx_channel = 0
    rx_channel = 1
    rxfile = "eth0.tx"
    txfile = "eth0.tx"
    sockif = "eth0"
  enddevice
end

section VAPI
  enabled = 0
  server_port = 9998
end

section fb
  enabled = 1
  baseaddr = 0x97000000
  refresh_rate = 10000
  filename = "primary"
end

section kbd
  enabled = 1
  irq = 5
  baseaddr = 0x94000000
  rxfile = "./kbdtest.rx"
end

section test
  enabled = 1
  baseaddr = 0xa5000000
end