OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [tags/] [MW_0_8_9PRE7/] [mw/] [src/] [drivers/] [scr_bios.c] - Rev 1765

Compare with Previous | Blame | View Log

/*
 * Copyright (c) 1999, 2000 Greg Haerr <greg@censoft.com>
 *
 * EGA/VGA 16 color 4 planes Screen Driver, direct hardware or bios
 * 	If HWINIT 1 is #defined, the file vgainit.c is
 * 	used to provide non-bios direct hw initialization of the VGA
 * 	chipset.  Otherwise, this driver uses int10 bios to 
 * 	set/reset graphics/text modes.
 *
 * 	If ROMFONT is #defined, the file romfont.c is used to
 * 	draw all fonts, afte the bios is called to
 * 	get the address of the ROM character font which
 * 	is used for the character bitmaps.  Otherwise, the
 * 	file genfont.c is used to draw linked in fonts, without
 * 	consulting the bios.
 *
 * 	All other access to the hardware is controlled through this driver.
 *
 * 	Blitting enabled with #define HAVEBLIT in vgaplan4.h
 *
 * 	This driver links with one of two other files, vgaplan4.c,
 * 	the portable VGA 4 planes 16 color driver, or asmplan4.s, which
 * 	is 8086 assembly language for speed.  This file itself
 * 	doesn't know about any planar or packed arrangement, relying soley
 * 	on the following external routines for all graphics drawing:
 * 		ega_init, ega_drawpixel, ega_readpixel,
 * 		ega_drawhorzline, ega_drawvertline
 *
 * 	All text/font drawing code is based on the above routines and
 * 	the included entry points for getting the ROM bitmap data.
 *
 * 	If the environment variable EGAMODE is set, the driver implements
 *	the EGA 640x350 (mode 10h) resolution, otherwise 640x480 (mode 12h)
 *	graphics mode is set.
 *
 *	The environment variable CHARHEIGHT if set will set the assumed rom
 *	font character height, which defaults to 14.
 *
 */
#if _MINIX
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <ibm/int86.h>
#include <sys/ioctl.h>
#define HWINIT		0	/* =1 for non-bios direct hardware init*/
#define ROMFONT		0	/* =0 no bios rom fonts available*/
#else
#ifdef __rtems__
#define HWINIT		1	/* =1 for non-bios direct hardware init*/
#define ROMFONT		0	/* =0 no bios rom fonts available*/
#else
#define HWINIT		0	/* =1 for non-bios direct hardware init*/
#define ROMFONT		1	/* =1 uses PC rom fonts */
#endif
#endif
 
#if ELKS
#include <linuxmt/ntty.h>
#endif
#include <stdio.h>
#include <stdlib.h>
#include "device.h"
#include "vgaplan4.h"
#if ROMFONT
#include "romfont.h"
#else
#include "genfont.h"
#endif
#include "genmem.h"
#include "fb.h"
 
/* VGA driver entry points*/
static PSD  VGA_open(PSD psd);
static void VGA_close(PSD psd);
#if _MINIX
static void VGA_getscreeninfo(PSD psd,PMWSCREENINFO psi);
#else
static void VGA_getscreeninfo(PSD psd,PMWSCREENINFO psi);;
#endif
static void VGA_setpalette(PSD psd,int first,int count,MWPALENTRY *pal);
static MWBOOL VGA_mapmemgc(PSD mempsd,MWCOORD w,MWCOORD h,int planes,int bpp,
		int linelen,int size,void *addr);
static void NULL_blit(PSD dstpsd, MWCOORD dstx, MWCOORD dsty, MWCOORD w,
		MWCOORD h, PSD srcpsd, MWCOORD srcx, MWCOORD srcy, long op) {}
static PSD  NULL_allocatememgc(PSD psd) { return NULL; }
static MWBOOL NULL_mapmemgc(PSD mempsd,MWCOORD w,MWCOORD h,int planes,int bpp,
			int linelen,int size,void *addr) { return 0; }
static void NULL_freememgc(PSD mempsd) {}
 
SCREENDEVICE	scrdev = {
	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, NULL,
	VGA_open,
	VGA_close,
	VGA_getscreeninfo,
	VGA_setpalette,
	ega_drawpixel,
	ega_readpixel,
	ega_drawhorzline,
	ega_drawvertline,
	gen_fillrect,
#if ROMFONT
	pcrom_fonts,
#else
	gen_fonts,
#endif
#if HAVEBLIT
	ega_blit,		/* Blit*/
#else
	NULL_blit,		/* Blit*/
#endif
	NULL,			/* PreSelect*/
	NULL,			/* DrawArea*/
	NULL,			/* SetIOPermissions*/
	gen_allocatememgc,
	VGA_mapmemgc,
	gen_freememgc
};
 
/* operating mode*/
static MWBOOL VGAMODE = TRUE;	/* ega or vga screen rows*/
 
/* int10 functions*/
#define FNGR640x480	0x0012	/* function for graphics mode 640x480x16*/
#define FNGR640x350	0x0010	/* function for graphics mode 640x350x16*/
#define FNTEXT		0x0003	/* function for 80x25 text mode*/
 
#if _MINIX
FARADDR int10(int mode, int z)
{
int fd;
struct mio_int86 mint86;
 
   fd = open("/dev/mem", O_RDONLY);
   memset(&mint86, 0, sizeof(mint86));
   ioctl(fd, MIOCINT86, &mint86);
   mint86.reg86.b.intno = 0x10;
   mint86.reg86.b.al = mode & 0xFF;
   ioctl(fd, MIOCINT86, &mint86);
   close(fd);
}
#endif
 
static PSD
VGA_open(PSD psd)
{
#if _MINIX
int s;
struct mio_ldt86 mldt86;
struct segdesc_s {              /* segment descriptor for protected mode */
	u16_t limit_low;
	u16_t base_low;
	u8_t base_middle;
	u8_t access;                  /* |P|DL|1|X|E|R|A| */
	u8_t granularity;             /* |G|X|0|A|LIMT| */
	u8_t base_high;
} *dp;
int fd;
unsigned long vidmem = 0xA0000;
 
	fd = open("/dev/mem", O_RDONLY);
	dp = (struct segdesc_s *) mldt86.entry;
	mldt86.idx = 1;
	s = ioctl(fd, MIOCGLDT86, &mldt86);
	dp->limit_low    = 0xFFFF;
	dp->base_low     = (vidmem >>  0) & 0xFFFF;
	dp->base_middle  = (vidmem >> 16) & 0xFF;
	dp->base_high    = (vidmem >> 24) & 0xFF;
	dp->granularity |= 0x80;
	mldt86.idx = 2;
	s = ioctl(fd, MIOCSLDT86, &mldt86);
	close(fd);
#endif
	/* setup operating mode from environment variable*/
	if(getenv("EGAMODE"))
		VGAMODE = FALSE;
	else VGAMODE = TRUE;
 
#if ELKS
	/* disallow console switching while in graphics mode*/
	if(ioctl(0, DCGET_GRAPH) != 0)
		return NULL;
#endif
 
#if HWINIT
	/* enter graphics mode*/
	ega_hwinit();
#else
	/* init bios graphics mode*/
	int10(VGAMODE? FNGR640x480: FNGR640x350, 0);
#endif
 
	/* init driver variables depending on ega/vga mode*/
	psd->xres = psd->xvirtres = 640;
	psd->yres = psd->yvirtres = VGAMODE? 480: 350;
	psd->planes = 4;
	psd->bpp = 4;
	psd->ncolors = 16;
	psd->pixtype = MWPF_PALETTE;
#if HAVEBLIT
	psd->flags = PSF_SCREEN | PSF_HAVEBLIT;
#else
	psd->flags = PSF_SCREEN;
#endif
 
	/* init planes driver (sets psd->addr and psd->linelen)*/
	ega_init(psd);
 
#if ROMFONT
	/* init pc rom font routines*/
	pcrom_init(psd);
#endif
#if 0
	ROM_CHAR_HEIGHT = VGAMODE? 16: 14;
#endif
	/* FIXME: add palette code*/
	return psd;
}
 
static void
VGA_close(PSD psd)
{
#if ELKS
	/* allow console switching again*/
	ioctl(0, DCREL_GRAPH);
#endif
#if HWINIT
	ega_hwterm();
#else
	/* init bios 80x25 text mode*/
	int10(FNTEXT, 0);
#endif
}
 
static void
VGA_getscreeninfo(PSD psd,PMWSCREENINFO psi)
{
	psi->rows = psd->yvirtres;
	psi->cols = psd->xvirtres;
	psi->planes = psd->planes;
	psi->bpp = psd->bpp;
	psi->ncolors = psd->ncolors;
	psi->pixtype = psd->pixtype;
	psi->fonts = NUMBER_FONTS;
 
	if(VGAMODE) {
		/* VGA 640x480*/
		psi->xdpcm = 27;	/* assumes screen width of 24 cm*/
		psi->ydpcm = 27;	/* assumes screen height of 18 cm*/
	} else {
		/* EGA 640x350*/
		psi->xdpcm = 27;	/* assumes screen width of 24 cm*/
		psi->ydpcm = 19;	/* assumes screen height of 18 cm*/
	}
 
#if ETA4000
	/* SVGA 800x600*/
	psi->xdpcm = 33;		/* assumes screen width of 24 cm*/
	psi->ydpcm = 33;		/* assumes screen height of 18 cm*/
#endif
}
 
static void
VGA_setpalette(PSD psd,int first,int count,MWPALENTRY *pal)
{
	/* not yet implemented, std 16 color palette assumed*/
}
 
#if HAVEBLIT
/* initialize memory device with passed parms, and select suitable fb driver*/
static MWBOOL
VGA_mapmemgc(PSD mempsd,MWCOORD w,MWCOORD h,int planes,int bpp,int linelen,
	int size,void *addr)
{
	extern SUBDRIVER memplan4;
 
	/* initialize mem screen driver*/
	initmemgc(mempsd, w, h, planes, bpp, linelen, size, addr);
 
	/* set and initialize subdriver into mem screen driver*/
	if (!set_subdriver(mempsd, &memplan4, TRUE))
		return 0;
 
	return 1;
}
#endif
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.