URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [tags/] [before_ORP/] [uclinux/] [uClinux-2.0.x/] [drivers/] [block/] [ll_rw_blk.c] - Rev 582
Go to most recent revision | Compare with Previous | Blame | View Log
/* * linux/drivers/block/ll_rw_blk.c * * Copyright (C) 1991, 1992 Linus Torvalds * Copyright (C) 1994, Karl Keyte: Added support for disk statistics */ /* * This handles all read/write requests to block devices */ #include <linux/sched.h> #include <linux/kernel.h> #include <linux/kernel_stat.h> #include <linux/errno.h> #include <linux/string.h> #include <linux/config.h> #include <linux/locks.h> #include <linux/mm.h> #include <asm/system.h> #include <asm/io.h> #include <linux/blk.h> /* * The request-struct contains all necessary data * to load a nr of sectors into memory */ static struct request all_requests[NR_REQUEST]; /* * The "disk" task queue is used to start the actual requests * after a plug */ DECLARE_TASK_QUEUE(tq_disk); /* * used to wait on when there are no free requests */ struct wait_queue * wait_for_request = NULL; /* This specifies how many sectors to read ahead on the disk. */ int read_ahead[MAX_BLKDEV] = {0, }; /* blk_dev_struct is: * *request_fn * *current_request */ struct blk_dev_struct blk_dev[MAX_BLKDEV]; /* initialized by blk_dev_init() */ /* * blk_size contains the size of all block-devices in units of 1024 byte * sectors: * * blk_size[MAJOR][MINOR] * * if (!blk_size[MAJOR]) then no minor size checking is done. */ int * blk_size[MAX_BLKDEV] = { NULL, NULL, }; /* * blksize_size contains the size of all block-devices: * * blksize_size[MAJOR][MINOR] * * if (!blksize_size[MAJOR]) then 1024 bytes is assumed. */ int * blksize_size[MAX_BLKDEV] = { NULL, NULL, }; /* * hardsect_size contains the size of the hardware sector of a device. * * hardsect_size[MAJOR][MINOR] * * if (!hardsect_size[MAJOR]) * then 512 bytes is assumed. * else * sector_size is hardsect_size[MAJOR][MINOR] * This is currently set by some scsi device and read by the msdos fs driver * This might be a some uses later. */ int * hardsect_size[MAX_BLKDEV] = { NULL, NULL, }; /* * Max number of sectors per request */ int * max_sectors[MAX_BLKDEV] = { NULL, NULL, }; /* * Max number of segments per request */ int * max_segments[MAX_BLKDEV] = { NULL, NULL, }; static inline int get_max_sectors(kdev_t dev) { if (!max_sectors[MAJOR(dev)]) return MAX_SECTORS; return max_sectors[MAJOR(dev)][MINOR(dev)]; } static inline int get_max_segments(kdev_t dev) { if (!max_segments[MAJOR(dev)]) return MAX_SEGMENTS; return max_segments[MAJOR(dev)][MINOR(dev)]; } /* * remove the plug and let it rip.. */ void unplug_device(void * data) { struct blk_dev_struct * dev = (struct blk_dev_struct *) data; unsigned long flags; save_flags(flags); cli(); if (dev->current_request == &dev->plug) { struct request * next = dev->plug.next; dev->current_request = next; if (next) { dev->plug.next = NULL; (dev->request_fn)(); } } restore_flags(flags); } /* * "plug" the device if there are no outstanding requests: this will * force the transfer to start only after we have put all the requests * on the list. * * This is called with interrupts off and no requests on the queue. */ static inline void plug_device(struct blk_dev_struct * dev) { dev->current_request = &dev->plug; queue_task_irq_off(&dev->plug_tq, &tq_disk); } /* * look for a free request in the first N entries. * NOTE: interrupts must be disabled on the way in, and will still * be disabled on the way out. */ static inline struct request * get_request(int n, kdev_t dev) { static struct request *prev_found = NULL, *prev_limit = NULL; register struct request *req, *limit; if (n <= 0) panic("get_request(%d): impossible!\n", n); limit = all_requests + n; if (limit != prev_limit) { prev_limit = limit; prev_found = all_requests; } req = prev_found; for (;;) { req = ((req > all_requests) ? req : limit) - 1; if (req->rq_status == RQ_INACTIVE) break; if (req == prev_found) return NULL; } prev_found = req; req->rq_status = RQ_ACTIVE; req->rq_dev = dev; return req; } /* * wait until a free request in the first N entries is available. */ static struct request * __get_request_wait(int n, kdev_t dev) { register struct request *req; struct wait_queue wait = { current, NULL }; add_wait_queue(&wait_for_request, &wait); for (;;) { current->state = TASK_UNINTERRUPTIBLE; cli(); req = get_request(n, dev); sti(); if (req) break; run_task_queue(&tq_disk); schedule(); } remove_wait_queue(&wait_for_request, &wait); current->state = TASK_RUNNING; return req; } static inline struct request * get_request_wait(int n, kdev_t dev) { register struct request *req; cli(); req = get_request(n, dev); sti(); if (req) return req; return __get_request_wait(n, dev); } /* RO fail safe mechanism */ static long ro_bits[MAX_BLKDEV][8]; int is_read_only(kdev_t dev) { int minor,major; major = MAJOR(dev); minor = MINOR(dev); if (major < 0 || major >= MAX_BLKDEV) return 0; return ro_bits[major][minor >> 5] & (1 << (minor & 31)); } void set_device_ro(kdev_t dev,int flag) { int minor,major; major = MAJOR(dev); minor = MINOR(dev); if (major < 0 || major >= MAX_BLKDEV) return; if (flag) ro_bits[major][minor >> 5] |= 1 << (minor & 31); else ro_bits[major][minor >> 5] &= ~(1 << (minor & 31)); } static inline void drive_stat_acct(int cmd, unsigned long nr_sectors, short disk_index) { kstat.dk_drive[disk_index]++; if (cmd == READ) { kstat.dk_drive_rio[disk_index]++; kstat.dk_drive_rblk[disk_index] += nr_sectors; } else if (cmd == WRITE) { kstat.dk_drive_wio[disk_index]++; kstat.dk_drive_wblk[disk_index] += nr_sectors; } else printk(KERN_ERR "drive_stat_acct: cmd not R/W?\n"); } /* * add-request adds a request to the linked list. * It disables interrupts so that it can muck with the * request-lists in peace. * * By this point, req->cmd is always either READ/WRITE, never READA/WRITEA, * which is important for drive_stat_acct() above. */ void add_request(struct blk_dev_struct * dev, struct request * req) { int major = MAJOR(req->rq_dev); int minor = MINOR(req->rq_dev); struct request * tmp; short disk_index; switch (major) { case DAC960_MAJOR+0: disk_index = (minor & 0x00f8) >> 3; if (disk_index < 4) drive_stat_acct(req->cmd, req->nr_sectors, disk_index); break; case SCSI_DISK_MAJOR: disk_index = (minor & 0x0070) >> 4; if (disk_index < 4) drive_stat_acct(req->cmd, req->nr_sectors, disk_index); break; case IDE0_MAJOR: /* same as HD_MAJOR */ case XT_DISK_MAJOR: disk_index = (minor & 0x0040) >> 6; drive_stat_acct(req->cmd, req->nr_sectors, disk_index); break; case IDE1_MAJOR: disk_index = ((minor & 0x0040) >> 6) + 2; drive_stat_acct(req->cmd, req->nr_sectors, disk_index); default: break; } req->next = NULL; cli(); if (req->bh) mark_buffer_clean(req->bh); if (!(tmp = dev->current_request)) { dev->current_request = req; (dev->request_fn)(); sti(); return; } for ( ; tmp->next ; tmp = tmp->next) { if ((IN_ORDER(tmp,req) || !IN_ORDER(tmp,tmp->next)) && IN_ORDER(req,tmp->next)) break; } req->next = tmp->next; tmp->next = req; /* for SCSI devices, call request_fn unconditionally */ if (scsi_blk_major(major)) (dev->request_fn)(); if ( (major >= DAC960_MAJOR+0 && major <= DAC960_MAJOR+7) || (major >= COMPAQ_SMART2_MAJOR+0 && major <= COMPAQ_SMART2_MAJOR+7)) (dev->request_fn)(); sti(); } static inline void attempt_merge (struct request *req, int max_sectors, int max_segments) { struct request *next = req->next; int total_segments; if (!next) return; if (req->sector + req->nr_sectors != next->sector) return; if (next->sem || req->cmd != next->cmd || req->rq_dev != next->rq_dev || req->nr_sectors + next->nr_sectors > max_sectors) return; total_segments = req->nr_segments + next->nr_segments; if (req->bhtail->b_data + req->bhtail->b_size == next->bh->b_data) total_segments--; if (total_segments > max_segments) return; req->bhtail->b_reqnext = next->bh; req->bhtail = next->bhtail; req->nr_sectors += next->nr_sectors; req->nr_segments = total_segments; next->rq_status = RQ_INACTIVE; req->next = next->next; wake_up (&wait_for_request); } void make_request(int major,int rw, struct buffer_head * bh) { unsigned int sector, count; struct request * req; int rw_ahead, max_req, max_sectors, max_segments; count = bh->b_size >> 9; sector = bh->b_rsector; /* Uhhuh.. Nasty dead-lock possible here.. */ if (buffer_locked(bh)) { #if 0 printk("make_request(): buffer already locked\n"); #endif return; } /* Maybe the above fixes it, and maybe it doesn't boot. Life is interesting */ lock_buffer(bh); if (blk_size[major]) if (blk_size[major][MINOR(bh->b_rdev)] < (sector + count)>>1) { bh->b_state &= (1 << BH_Lock) | (1 << BH_FreeOnIO); /* This may well happen - the kernel calls bread() without checking the size of the device, e.g., when mounting a device. */ printk(KERN_INFO "attempt to access beyond end of device\n"); printk(KERN_INFO "%s: rw=%d, want=%d, limit=%d\n", kdevname(bh->b_rdev), rw, (sector + count)>>1, blk_size[major][MINOR(bh->b_rdev)]); unlock_buffer(bh); return; } rw_ahead = 0; /* normal case; gets changed below for READA/WRITEA */ switch (rw) { case READA: rw_ahead = 1; rw = READ; /* drop into READ */ case READ: if (buffer_uptodate(bh)) { #if 0 printk ("make_request(): buffer uptodate for READ\n"); #endif unlock_buffer(bh); /* Hmmph! Already have it */ return; } kstat.pgpgin++; max_req = NR_REQUEST; /* reads take precedence */ break; case WRITEA: rw_ahead = 1; rw = WRITE; /* drop into WRITE */ case WRITE: if (!buffer_dirty(bh)) { #if 0 printk ("make_request(): buffer clean for WRITE\n"); #endif unlock_buffer(bh); /* Hmmph! Nothing to write */ return; } /* We don't allow the write-requests to fill up the * queue completely: we want some room for reads, * as they take precedence. The last third of the * requests are only for reads. */ kstat.pgpgout++; max_req = (NR_REQUEST * 2) / 3; break; default: printk(KERN_ERR "make_request: bad block dev cmd," " must be R/W/RA/WA\n"); unlock_buffer(bh); return; } /* look for a free request. */ /* Loop uses two requests, 1 for loop and 1 for the real device. * Cut max_req in half to avoid running out and deadlocking. */ if (major == LOOP_MAJOR) max_req >>= 1; /* * Try to coalesce the new request with old requests */ max_sectors = get_max_sectors(bh->b_rdev); max_segments = get_max_segments(bh->b_rdev); cli(); req = blk_dev[major].current_request; if (!req) { /* MD and loop can't handle plugging without deadlocking */ if (major != MD_MAJOR && major != LOOP_MAJOR) plug_device(blk_dev + major); } else switch (major) { case IDE0_MAJOR: /* same as HD_MAJOR */ case IDE1_MAJOR: case FLOPPY_MAJOR: case IDE2_MAJOR: case IDE3_MAJOR: /* * The scsi disk and cdrom drivers completely remove the request * from the queue when they start processing an entry. For this * reason it is safe to continue to add links to the top entry for * those devices. * * All other drivers need to jump over the first entry, as that * entry may be busy being processed and we thus can't change it. */ req = req->next; if (!req) break; /* fall through */ case SCSI_DISK_MAJOR: case SCSI_CDROM_MAJOR: case DAC960_MAJOR+0: case DAC960_MAJOR+1: case DAC960_MAJOR+2: case DAC960_MAJOR+3: case DAC960_MAJOR+4: case DAC960_MAJOR+5: case DAC960_MAJOR+6: case DAC960_MAJOR+7: case COMPAQ_SMART2_MAJOR+0: case COMPAQ_SMART2_MAJOR+1: case COMPAQ_SMART2_MAJOR+2: case COMPAQ_SMART2_MAJOR+3: case COMPAQ_SMART2_MAJOR+4: case COMPAQ_SMART2_MAJOR+5: case COMPAQ_SMART2_MAJOR+6: case COMPAQ_SMART2_MAJOR+7: do { if (req->sem) continue; if (req->cmd != rw) continue; if (req->nr_sectors + count > max_sectors) continue; if (req->rq_dev != bh->b_rdev) continue; /* Can we add it to the end of this request? */ if (req->sector + req->nr_sectors == sector) { if (req->bhtail->b_data + req->bhtail->b_size != bh->b_data) { if (req->nr_segments < max_segments) req->nr_segments++; else continue; } req->bhtail->b_reqnext = bh; req->bhtail = bh; req->nr_sectors += count; /* Can we now merge this req with the next? */ attempt_merge(req, max_sectors, max_segments); /* or to the beginning? */ } else if (req->sector - count == sector) { if (bh->b_data + bh->b_size != req->bh->b_data) { if (req->nr_segments < max_segments) req->nr_segments++; else continue; } bh->b_reqnext = req->bh; req->bh = bh; req->buffer = bh->b_data; req->current_nr_sectors = count; req->sector = sector; req->nr_sectors += count; } else continue; mark_buffer_clean(bh); sti(); return; } while ((req = req->next) != NULL); } /* find an unused request. */ req = get_request(max_req, bh->b_rdev); sti(); /* if no request available: if rw_ahead, forget it; otherwise try again blocking.. */ if (!req) { if (rw_ahead) { unlock_buffer(bh); return; } req = __get_request_wait(max_req, bh->b_rdev); } /* fill up the request-info, and add it to the queue */ req->cmd = rw; req->errors = 0; req->sector = sector; req->nr_sectors = count; req->nr_segments = 1; req->current_nr_sectors = count; req->buffer = bh->b_data; req->sem = NULL; req->bh = bh; req->bhtail = bh; req->next = NULL; add_request(major+blk_dev,req); } /* This function can be used to request a number of buffers from a block device. Currently the only restriction is that all buffers must belong to the same device */ void ll_rw_block(int rw, int nr, struct buffer_head * bh[]) { unsigned int major; int correct_size; struct blk_dev_struct * dev; int i; /* Make sure that the first block contains something reasonable */ while (!*bh) { bh++; if (--nr <= 0) return; } dev = NULL; if ((major = MAJOR(bh[0]->b_dev)) < MAX_BLKDEV) dev = blk_dev + major; if (!dev || !dev->request_fn) { printk(KERN_ERR "ll_rw_block: Trying to read nonexistent block-device %s (%ld)\n", kdevname(bh[0]->b_dev), bh[0]->b_blocknr); goto sorry; } /* Determine correct block size for this device. */ correct_size = BLOCK_SIZE; if (blksize_size[major]) { i = blksize_size[major][MINOR(bh[0]->b_dev)]; if (i) correct_size = i; } /* Verify requested block sizes. */ for (i = 0; i < nr; i++) { if (bh[i] && bh[i]->b_size != correct_size) { printk(KERN_NOTICE "ll_rw_block: device %s: " "only %d-char blocks implemented (%lu)\n", kdevname(bh[0]->b_dev), correct_size, bh[i]->b_size); goto sorry; } /* Md remaps blocks now */ bh[i]->b_rdev = bh[i]->b_dev; bh[i]->b_rsector=bh[i]->b_blocknr*(bh[i]->b_size >> 9); #ifdef CONFIG_BLK_DEV_MD if (major==MD_MAJOR && md_map (MINOR(bh[i]->b_dev), &bh[i]->b_rdev, &bh[i]->b_rsector, bh[i]->b_size >> 9)) { printk (KERN_ERR "Bad md_map in ll_rw_block\n"); goto sorry; } #endif } if ((rw == WRITE || rw == WRITEA) && is_read_only(bh[0]->b_dev)) { printk(KERN_NOTICE "Can't write to read-only device %s\n", kdevname(bh[0]->b_dev)); goto sorry; } for (i = 0; i < nr; i++) { if (bh[i]) { set_bit(BH_Req, &bh[i]->b_state); #ifdef CONFIG_BLK_DEV_MD if (MAJOR(bh[i]->b_dev) == MD_MAJOR) { md_make_request(MINOR (bh[i]->b_dev), rw, bh[i]); continue; } #endif make_request(MAJOR(bh[i]->b_rdev), rw, bh[i]); } } return; sorry: for (i = 0; i < nr; i++) { if (bh[i]) { clear_bit(BH_Dirty, &bh[i]->b_state); clear_bit(BH_Uptodate, &bh[i]->b_state); } } return; } void ll_rw_swap_file(int rw, kdev_t dev, unsigned int *b, int nb, char *buf) { int i, j; int buffersize; int max_req; unsigned long rsector; kdev_t rdev; struct request * req[8]; unsigned int major = MAJOR(dev); struct semaphore sem = MUTEX_LOCKED; if (major >= MAX_BLKDEV || !(blk_dev[major].request_fn)) { printk(KERN_NOTICE "ll_rw_swap_file: trying to swap to" " nonexistent block-device\n"); return; } max_req = NR_REQUEST; switch (rw) { case READ: break; case WRITE: max_req = (NR_REQUEST * 2) / 3; if (is_read_only(dev)) { printk(KERN_NOTICE "Can't swap to read-only device %s\n", kdevname(dev)); return; } break; default: panic("ll_rw_swap: bad block dev cmd, must be R/W"); } buffersize = PAGE_SIZE / nb; if (major == LOOP_MAJOR) max_req >>= 1; for (j=0, i=0; i<nb;) { for (; j < 8 && i < nb; j++, i++, buf += buffersize) { rdev = dev; rsector = b[i] * (buffersize >> 9); #ifdef CONFIG_BLK_DEV_MD if (major==MD_MAJOR && md_map (MINOR(dev), &rdev, &rsector, buffersize >> 9)) { printk (KERN_ERR "Bad md_map in ll_rw_swap_file\n"); return; } #endif if (j == 0) { req[j] = get_request_wait(max_req, rdev); } else { cli(); req[j] = get_request(max_req, rdev); sti(); if (req[j] == NULL) break; } req[j]->cmd = rw; req[j]->errors = 0; req[j]->sector = rsector; req[j]->nr_sectors = buffersize >> 9; req[j]->nr_segments = 1; req[j]->current_nr_sectors = buffersize >> 9; req[j]->buffer = buf; req[j]->sem = &sem; req[j]->bh = NULL; req[j]->next = NULL; add_request(MAJOR(rdev)+blk_dev,req[j]); } run_task_queue(&tq_disk); while (j > 0) { j--; down(&sem); } } } int blk_dev_init(void) { struct request * req; struct blk_dev_struct *dev; for (dev = blk_dev + MAX_BLKDEV; dev-- != blk_dev;) { dev->request_fn = NULL; dev->current_request = NULL; dev->plug.rq_status = RQ_INACTIVE; dev->plug.cmd = -1; dev->plug.next = NULL; dev->plug_tq.routine = &unplug_device; dev->plug_tq.data = dev; } req = all_requests + NR_REQUEST; while (--req >= all_requests) { req->rq_status = RQ_INACTIVE; req->next = NULL; } memset(ro_bits,0,sizeof(ro_bits)); #ifdef CONFIG_BLK_DEV_RAM rd_init(); #endif #ifdef CONFIG_BLK_DEV_BLKMEM blkmem_init(); #endif #ifdef CONFIG_DEV_FLASH flash_init(); /* this also does the char dev if need be */ #endif #ifdef CONFIG_BLK_DEV_LOOP loop_init(); #endif #ifdef CONFIG_CDI_INIT cdi_init(); /* this MUST precede ide_init */ #endif CONFIG_CDI_INIT #ifdef CONFIG_BLK_DEV_IDE ide_init(); /* this MUST precede hd_init */ #endif #ifdef CONFIG_BLK_DEV_HD hd_init(); #endif #ifdef CONFIG_BLK_DEV_XD xd_init(); #endif #ifdef CONFIG_PARIDE { extern void paride_init(void); paride_init(); }; #endif #ifdef CONFIG_BLK_DEV_FD floppy_init(); #else #ifndef CONFIG_COLDFIRE outb_p(0xc, 0x3f2); #endif #endif #ifdef CONFIG_CDU31A cdu31a_init(); #endif CONFIG_CDU31A #ifdef CONFIG_MCD mcd_init(); #endif CONFIG_MCD #ifdef CONFIG_MCDX mcdx_init(); #endif CONFIG_MCDX #ifdef CONFIG_SBPCD sbpcd_init(); #endif CONFIG_SBPCD #ifdef CONFIG_AZTCD aztcd_init(); #endif CONFIG_AZTCD #ifdef CONFIG_CDU535 sony535_init(); #endif CONFIG_CDU535 #ifdef CONFIG_GSCD gscd_init(); #endif CONFIG_GSCD #ifdef CONFIG_CM206 cm206_init(); #endif #ifdef CONFIG_OPTCD optcd_init(); #endif CONFIG_OPTCD #ifdef CONFIG_SJCD sjcd_init(); #endif CONFIG_SJCD #ifdef CONFIG_BLK_DEV_MD md_init(); #endif CONFIG_BLK_DEV_MD return 0; }
Go to most recent revision | Compare with Previous | Blame | View Log