Subversion Repositories or1k

#ifndef _AHA1740_H
 
/* $Id: aha1740.h,v 1.1.1.1 2001-09-10 07:44:30 simons Exp $
 *
 * Header file for the adaptec 1740 driver for Linux
 *
 * With minor revisions 3/31/93
 * Written and (C) 1992,1993 Brad McLean.  See aha1740.c
 * for more info
 *
 */
 
#include <linux/types.h>
#include <linux/kdev_t.h>
 
/* Eisa Enhanced mode operation - slot locating and addressing */
#define MINEISA 1   /* I don't have an EISA Spec to know these ranges, so I */
#define MAXEISA 8   /* Just took my machine's specifications.  Adjust to fit.*/
		    /* I just saw an ad, and bumped this from 6 to 8 */
#define	SLOTBASE(x)	((x << 12) + 0xc80)
#define SLOTSIZE	0x5c
 
/* EISA configuration registers & values */
#define	HID0(base)	(base + 0x0)
#define	HID1(base)	(base + 0x1)
#define HID2(base)	(base + 0x2)
#define	HID3(base)	(base + 0x3)
#define	EBCNTRL(base)	(base + 0x4)
#define	PORTADR(base)	(base + 0x40)
#define BIOSADR(base)	(base + 0x41)
#define INTDEF(base)	(base + 0x42)
#define SCSIDEF(base)	(base + 0x43)
#define BUSDEF(base)	(base + 0x44)
#define	RESV0(base)	(base + 0x45)
#define RESV1(base)	(base + 0x46)
#define	RESV2(base)	(base + 0x47)
 
#define	HID_MFG	"ADP"
#define	HID_PRD 0
#define HID_REV 2
#define EBCNTRL_VALUE 1
#define PORTADDR_ENH 0x80
/* READ */
#define	G2INTST(base)	(base + 0x56)
#define G2STAT(base)	(base + 0x57)
#define	MBOXIN0(base)	(base + 0x58)
#define	MBOXIN1(base)	(base + 0x59)
#define	MBOXIN2(base)	(base + 0x5a)
#define	MBOXIN3(base)	(base + 0x5b)
#define G2STAT2(base)	(base + 0x5c)
 
#define G2INTST_MASK		0xf0	/* isolate the status */
#define	G2INTST_CCBGOOD		0x10	/* CCB Completed */
#define	G2INTST_CCBRETRY	0x50	/* CCB Completed with a retry */
#define	G2INTST_HARDFAIL	0x70	/* Adapter Hardware Failure */
#define	G2INTST_CMDGOOD		0xa0	/* Immediate command success */
#define G2INTST_CCBERROR	0xc0	/* CCB Completed with error */
#define	G2INTST_ASNEVENT	0xd0	/* Asynchronous Event Notification */
#define	G2INTST_CMDERROR	0xe0	/* Immediate command error */
 
#define G2STAT_MBXOUT	4	/* Mailbox Out Empty Bit */
#define	G2STAT_INTPEND	2	/* Interrupt Pending Bit */
#define	G2STAT_BUSY	1	/* Busy Bit (attention pending) */
 
#define G2STAT2_READY	0	/* Host Ready Bit */
 
/* WRITE (and ReadBack) */
#define	MBOXOUT0(base)	(base + 0x50)
#define	MBOXOUT1(base)	(base + 0x51)
#define	MBOXOUT2(base)	(base + 0x52)
#define	MBOXOUT3(base)	(base + 0x53)
#define	ATTN(base)	(base + 0x54)
#define G2CNTRL(base)	(base + 0x55)
 
#define	ATTN_IMMED	0x10	/* Immediate Command */
#define	ATTN_START	0x40	/* Start CCB */
#define	ATTN_ABORT	0x50	/* Abort CCB */
 
#define G2CNTRL_HRST	0x80		/* Hard Reset */
#define G2CNTRL_IRST	0x40		/* Clear EISA Interrupt */
#define G2CNTRL_HRDY	0x20		/* Sets HOST ready */
 
/* This is used with scatter-gather */
struct aha1740_chain {
  u32  dataptr;		/* Location of data */
  u32  datalen;		/* Size of this part of chain */
};
 
/* These belong in scsi.h */
#define any2scsi(up, p)				\
(up)[0] = (((unsigned long)(p)) >> 16)  ;	\
(up)[1] = (((unsigned long)(p)) >> 8);		\
(up)[2] = ((unsigned long)(p));
 
#define scsi2int(up) ( (((long)*(up)) << 16) + (((long)(up)[1]) << 8) + ((long)(up)[2]) )
 
#define xany2scsi(up, p)	\
(up)[0] = ((long)(p)) >> 24;	\
(up)[1] = ((long)(p)) >> 16;	\
(up)[2] = ((long)(p)) >> 8;	\
(up)[3] = ((long)(p));
 
#define xscsi2int(up) ( (((long)(up)[0]) << 24) + (((long)(up)[1]) << 16) \
		      + (((long)(up)[2]) <<  8) +  ((long)(up)[3]) )
 
#define MAX_CDB 12
#define MAX_SENSE 14
#define MAX_STATUS 32
 
struct ecb {			/* Enhanced Control Block 6.1 */
  u16	cmdw;			/* Command Word */
  /* Flag Word 1 */
  u16		cne:1,		/* Control Block Chaining */
	:6,	di:1,		/* Disable Interrupt */
	:2,	ses:1,		/* Suppress Underrun error */
	:1,	sg:1,		/* Scatter/Gather */
	:1,	dsb:1,		/* Disable Status Block */
		ars:1;		/* Automatic Request Sense */
  /* Flag Word 2 */
  u16		lun:3,		/* Logical Unit */
		tag:1,		/* Tagged Queuing */
		tt:2,		/* Tag Type */
		nd:1,		/* No Disconnect */
	:1,	dat:1,		/* Data transfer - check direction */
		dir:1,		/* Direction of transfer 1 = datain */
		st:1,		/* Suppress Transfer */
		chk:1,		/* Calculate Checksum */
	:2,	rec:1,	:1;	/* Error Recovery */
  u16	nil0;			/* nothing */
  u32	dataptr;		/* Data or Scatter List ptr */
  u32	datalen;		/* Data or Scatter List len */
  u32	statusptr;		/* Status Block ptr */
  u32	linkptr;		/* Chain Address */
  u32	nil1;			/* nothing */
  u32	senseptr;		/* Sense Info Pointer */
  u8	senselen;		/* Sense Length */
  u8	cdblen;			/* CDB Length */
  u16	datacheck;		/* Data checksum */
  u8	cdb[MAX_CDB];		/* CDB area */
/* Hardware defined portion ends here, rest is driver defined */
  u8	sense[MAX_SENSE];	/* Sense area */ 
  u8	status[MAX_STATUS];	/* Status area */
  Scsi_Cmnd *SCpnt;		/* Link to the SCSI Command Block */
  void (*done)(Scsi_Cmnd *);	/* Completion Function */
};
 
#define	AHA1740CMD_NOP	 0x00	/* No OP */
#define AHA1740CMD_INIT	 0x01	/* Initiator SCSI Command */
#define AHA1740CMD_DIAG	 0x05	/* Run Diagnostic Command */
#define AHA1740CMD_SCSI	 0x06	/* Initialize SCSI */
#define AHA1740CMD_SENSE 0x08	/* Read Sense Information */
#define AHA1740CMD_DOWN  0x09	/* Download Firmware (yeah, I bet!) */
#define AHA1740CMD_RINQ  0x0a	/* Read Host Adapter Inquiry Data */
#define AHA1740CMD_TARG  0x10	/* Target SCSI Command */
 
int aha1740_detect(Scsi_Host_Template *);
int aha1740_command(Scsi_Cmnd *);
int aha1740_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
int aha1740_abort(Scsi_Cmnd *);
int aha1740_reset(Scsi_Cmnd *, unsigned int);
int aha1740_biosparam(Disk *, kdev_t, int*);
int aha1740_proc_info(char *buffer, char **start, off_t offset,
                               int length, int hostno, int inout);
 
#define AHA1740_ECBS 32
#define AHA1740_SCATTER 16
#define AHA1740_CMDLUN 1
 
#ifndef NULL
	#define NULL 0
#endif
 
extern struct proc_dir_entry proc_scsi_aha1740;
 
#define AHA1740 {NULL,	NULL,				\
                   &proc_scsi_aha1740,			\
		   aha1740_proc_info,	                \
		   "Adaptec 174x (EISA)",		\
		   aha1740_detect,			\
		   NULL,				\
		   NULL, 				\
		   aha1740_command,			\
		   aha1740_queuecommand,		\
		   aha1740_abort,			\
		   aha1740_reset,			\
		   NULL,				\
		   aha1740_biosparam,                   \
		   AHA1740_ECBS, 			\
		   7, 					\
		   AHA1740_SCATTER, 			\
		   AHA1740_CMDLUN, 			\
		   0, 					\
		   0, 					\
		   ENABLE_CLUSTERING}
 
#endif