URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [tags/] [nog_patch_58/] [or1ksim/] [peripheral/] [atadevice.h] - Rev 1769
Go to most recent revision | Compare with Previous | Blame | View Log
/* atahost.h -- ATA Host code simulation Copyright (C) 2002 Richard Herveille, rherveille@opencores.org This file is part of OpenRISC 1000 Architectural Simulator This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* * Definitions for the Opencores ATA Controller Core, Device model */ #ifndef __OR1KSIM_ATAD_H #define __OR1KSIM_ATAD_H #include <stdio.h> /* ata device debug level 0: don't display debug information 1: display general (debug) information 2: display program flow control information 3: display internal statemachine flow information 4: display all debug information */ #define ATA_DEVICE_DEBUG_LVL 4 /* --- Register definitions --- */ /* ----- ATA Registers */ /* These are actually the memory locations where the ATA registers */ /* can be found in the host system; i.e. as seen from the CPU. */ /* However, this doesn't matter for the simulator. */ #define ATA_ASR 0x78 /* Alternate Status Register (R) */ #define ATA_CR 0x5c /* Command Register (W) */ #define ATA_CHR 0x54 /* Cylinder High Register (R/W) */ #define ATA_CLR 0x50 /* Cylinder Low Register (R/W) */ #define ATA_DR 0x40 /* Data Register */ #define ATA_DCR 0x78 /* Device Control Register (W) */ #define ATA_DHR 0x58 /* Device/Head Register (R/W) */ #define ATA_ERR 0x44 /* Error Register (R) */ #define ATA_FR 0x44 /* Features Register (W) */ #define ATA_SCR 0x48 /* Sector Count Register (R/W) */ #define ATA_SNR 0x4c /* Sector Number Register (R/W) */ #define ATA_SR 0x5c /* Status Register (R) */ #define ATA_DA 0x7c /* Device Address Register (R) */ /* ATA/ATAPI-5 does not describe Device Status Register */ /* -------------------------------------- */ /* ----- ATA Device bit defenitions ----- */ /* -------------------------------------- */ /* ----- ATA (Alternate) Status Register */ #define ATA_SR_BSY 0x80 /* Busy */ #define ATA_SR_DRDY 0x40 /* Device Ready */ #define ATA_SR_DF 0x20 /* Device Fault */ #define ATA_SR_DSC 0x10 /* Device Seek Complete */ #define ATA_SR_DRQ 0x08 /* Data Request */ #define ATA_SR_COR 0x04 /* Corrected data (obsolete) */ #define ATA_SR_IDX 0x02 /* (obsolete) */ #define ATA_SR_ERR 0x01 /* Error */ /* ----- ATA Device Control Register */ /* bits 7-3 are reserved */ #define ATA_DCR_RST 0x04 /* Software reset (RST=1, reset) */ #define ATA_DCR_IEN 0x02 /* Interrupt Enable (IEN=0, enabled) */ /* always write a '0' to bit0 */ /* ----- ATA Device Address Register */ /* All values in this register are one's complement (i.e. inverted) */ #define ATA_DAR_WTG 0x40 /* Write Gate */ #define ATA_DAR_H 0x3c /* Head Select */ #define ATA_DAR_DS1 0x02 /* Drive select 1 */ #define ATA_DAR_DS0 0x01 /* Drive select 0 */ /* ----- Device/Head Register */ #define ATA_DHR_LBA 0x40 /* LBA/CHS mode ('1'=LBA mode) */ #define ATA_DHR_DEV 0x10 /* Device ('0'=dev0, '1'=dev1) */ #define ATA_DHR_H 0x0f /* Head Select */ /* ----- Error Register */ #define ATA_ERR_BBK 0x80 /* Bad Block */ #define ATA_ERR_UNC 0x40 /* Uncorrectable Data Error */ #define ATA_ERR_IDNF 0x10 /* ID Not Found */ #define ATA_ERR_ABT 0x04 /* Aborted Command */ #define ATA_ERR_TON 0x02 /* Track0 Not Found */ #define ATA_ERR_AMN 0x01 /* Address Mark Not Found */ /* -------------------------- */ /* ----- Device Defines ----- */ /* -------------------------- */ /* types for hard disk simulation */ #define TYPE_NO_CONNECT 0 #define TYPE_FILE 1 #define TYPE_LOCAL 2 /* ----------------------------- */ /* ----- Statemachine defines -- */ /* ----------------------------- */ #define ATA_STATE_IDLE 0x00 #define ATA_STATE_SW_RST 0x01 #define ATA_STATE_HW_RST 0x02 /* ---------------------------- */ /* ----- Structs ----- */ /* ---------------------------- */ typedef struct{ /******* Housekeeping *****************************************/ struct { /* device number */ int dev; /* current PIO mode */ int pio_mode; /* current DMA mode */ int dma_mode; /* databuffer */ unsigned short dbuf[4096]; unsigned short *dbuf_ptr; unsigned short dbuf_cnt; /* current statemachine state */ int state; /* current CHS translation settings */ unsigned int heads_per_cylinder; unsigned int sectors_per_track; } internals; /******* ATA Device Registers *********************************/ struct { unsigned char command; unsigned char cylinder_low; unsigned char cylinder_high; unsigned char device_control; unsigned char device_head; unsigned char error; unsigned char features; unsigned char sector_count; unsigned char sector_number; unsigned char status; short dataport_i; } regs; /******** ata device output signals **************************/ struct { int iordy; int intrq; int dmarq; int pdiagi, pdiago; int daspi, daspo; } sigs; /******** simulator settings **********************************/ /* simulate ata-device */ char *file; /* Filename (if type == FILE) */ FILE *stream; /* stream where the simulated device connects to*/ int type; /* Simulate device using */ /* NO_CONNECT: no device connected (dummy) */ /* FILE : a file */ /* LOCAL : a local stream, e.g./dev/hda1 */ unsigned long size; /* size in MB of the simulated device */ int packet; /* device implements PACKET command set */ } ata_device; typedef struct{ ata_device device0, device1; } ata_devices; /* ------------------------------ */ /* ----- Device Prototypes ----- */ /* ------------------------------ */ int ata_device_debug(int lvl, char *format, ...); /* all devices */ void ata_devices_init(ata_devices *devices); void ata_devices_hw_reset(ata_devices *devices, int reset_signal); short ata_devices_read(ata_devices *devices, char adr); void ata_devices_write(ata_devices *devices, char adr, short value); /* single device */ void ata_device_init(ata_device *device, int dev); void ata_device_hw_reset(ata_device *device, int reset_signal, int daspo, int pdiagi, int daspi); void ata_device_do_control_register(ata_device *device); void ata_device_do_command_register(ata_device *device); void ata_device_write(ata_device *device, char adr, short value); /* housekeeping routines */ FILE *open_file(unsigned long *size, const char *filename); FILE *open_local(void); #endif
Go to most recent revision | Compare with Previous | Blame | View Log