URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [tags/] [nog_patch_64/] [or1ksim/] [peripheral/] [16450.h] - Rev 1780
Go to most recent revision | Compare with Previous | Blame | View Log
/* 16450.h -- Definition of types and structures for 8250/16450 serial UART Copyright (C) 2000 Damjan Lampret, lampret@opencores.org This file is part of OpenRISC 1000 Architectural Simulator. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Prototypes */ void uart_reset(); void uart_status(); /* Definitions */ #define UART_ADDR_SPACE (8) /* UART memory address space size in bytes */ #define UART_MAX_FIFO_LEN (16) /* rx FIFO for uart 16550 */ #define MAX_SKEW (1) /* max. clock skew in subclocks */ #define UART_VAPI_BUF_LEN 128 /* Size of VAPI command buffer - VAPI should not send more that this amout of char before requesting something back */ #define UART_CLOCK_DIVIDER 16 /* Uart clock divider */ #define UART_FGETC_SLOWDOWN 100 /* fgetc slowdown factor */ /* Registers */ struct dev_16450 { struct { unsigned txbuf[UART_MAX_FIFO_LEN]; unsigned rxbuf[UART_MAX_FIFO_LEN]; unsigned char dll; unsigned char dlh; unsigned char ier; unsigned char iir; unsigned char fcr; unsigned char lcr; unsigned char mcr; unsigned char lsr; unsigned char msr; unsigned char scr; } regs; /* Visible registers */ struct { unsigned long txser; /* Character just sending */ unsigned long rxser; /* Character just receiving */ unsigned char loopback; } iregs; /* Internal registers */ struct { int txbuf_head; int txbuf_tail; int rxbuf_head; int rxbuf_tail; unsigned int txser_full; unsigned int rxser_full; unsigned int txbuf_full; unsigned int rxbuf_full; unsigned thre_int; unsigned break_set; unsigned long txser_clks; unsigned long rxser_clks; unsigned timeout_count; } istat; /* Internal status */ /* Clocks per char */ unsigned long char_clks; /* VAPI internal registers */ struct { unsigned long char_clks; int dll, dlh; int lcr; int skew; int next_break; int next_break_cnt; int cur_break; int cur_break_cnt; int break_sent; } vapi; /* Required by VAPI - circular buffer */ unsigned long vapi_buf[UART_VAPI_BUF_LEN]; /* Buffer to store incoming characters to, since we cannot handle them so fast - we are serial */ int vapi_buf_head_ptr; /* Where we write to */ int vapi_buf_tail_ptr; /* Where we read from */ /* Length of FIFO, 16 for 16550, 1 for 16450 */ int fifo_len; /* fgetc slowdown */ int slowdown; struct channel *channel; /* Configuration */ int jitter; oraddr_t baseaddr; int irq; unsigned long vapi_id; int uart16550; char *channel_str; }; /* * Addresses of visible registers * */ #define UART_RXBUF 0 /* R: Rx buffer, DLAB=0 */ #define UART_TXBUF 0 /* W: Tx buffer, DLAB=0 */ #define UART_DLL 0 /* R/W: Divisor Latch Low, DLAB=1 */ #define UART_DLH 1 /* R/W: Divisor Latch High, DLAB=1 */ #define UART_IER 1 /* R/W: Interrupt Enable Register */ #define UART_IIR 2 /* R: Interrupt ID Register */ #define UART_FCR 2 /* W: FIFO Control Register */ #define UART_LCR 3 /* R/W: Line Control Register */ #define UART_MCR 4 /* W: Modem Control Register */ #define UART_LSR 5 /* R: Line Status Register */ #define UART_MSR 6 /* R: Modem Status Register */ #define UART_SCR 7 /* R/W: Scratch Register */ /* * R/W masks for valid bits in 8250/16450 (mask out 16550 and later bits) * */ #define UART_VALID_LCR 0xff #define UART_VALID_LSR 0xff #define UART_VALID_IIR 0x0f #define UART_VALID_FCR 0xc0 #define UART_VALID_IER 0x0f #define UART_VALID_MCR 0x1f #define UART_VALID_MSR 0xff /* * Bit definitions for the Line Control Register * */ #define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ #define UART_LCR_SBC 0x40 /* Set break control */ #define UART_LCR_SPAR 0x20 /* Stick parity (?) */ #define UART_LCR_EPAR 0x10 /* Even parity select */ #define UART_LCR_PARITY 0x08 /* Parity Enable */ #define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ #define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ #define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ #define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ #define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ #define UART_LCR_RESET 0x03 /* * Bit definitions for the Line Status Register */ #define UART_LSR_RXERR 0x80 /* Error in rx fifo */ #define UART_LSR_TXSERE 0x40 /* Transmitter serial register empty */ #define UART_LSR_TXBUFE 0x20 /* Transmitter buffer register empty */ #define UART_LSR_BREAK 0x10 /* Break interrupt indicator */ #define UART_LSR_FRAME 0x08 /* Frame error indicator */ #define UART_LSR_PARITY 0x04 /* Parity error indicator */ #define UART_LSR_OVRRUN 0x02 /* Overrun error indicator */ #define UART_LSR_RDRDY 0x01 /* Receiver data ready */ /* * Bit definitions for the Interrupt Identification Register */ #define UART_IIR_NO_INT 0x01 /* No interrupts pending */ #define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ #define UART_IIR_MSI 0x00 /* Modem status interrupt (Low priority) */ #define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ #define UART_IIR_RDI 0x04 /* Receiver data interrupt */ #define UART_IIR_RLSI 0x06 /* Receiver line status interrupt (High p.) */ #define UART_IIR_CTI 0x0c /* Character timeout */ /* * Bit Definitions for the FIFO Control Register */ #define UART_FCR_FIE 0x01 /* FIFO enable */ #define UART_FCR_RRXFI 0x02 /* Reset rx FIFO */ #define UART_FCR_RTXFI 0x04 /* Reset tx FIFO */ #define UART_FIFO_TRIGGER(x) /* Trigger values for indexes 0..3 */\ ((x) == 0 ? 1\ :(x) == 1 ? 4\ :(x) == 2 ? 8\ :(x) == 3 ? 14 : 0) /* * Bit definitions for the Interrupt Enable Register */ #define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ #define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ #define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ #define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ /* * Bit definitions for the Modem Control Register */ #define UART_MCR_LOOP 0x10 /* Enable loopback mode */ #define UART_MCR_AUX2 0x08 /* Auxilary 2 */ #define UART_MCR_AUX1 0x04 /* Auxilary 1 */ #define UART_MCR_RTS 0x02 /* Force RTS */ #define UART_MCR_DTR 0x01 /* Force DTR */ /* * Bit definitions for the Modem Status Register */ #define UART_MSR_DCD 0x80 /* Data Carrier Detect */ #define UART_MSR_RI 0x40 /* Ring Indicator */ #define UART_MSR_DSR 0x20 /* Data Set Ready */ #define UART_MSR_CTS 0x10 /* Clear to Send */ #define UART_MSR_DDCD 0x08 /* Delta DCD */ #define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ #define UART_MSR_DDSR 0x02 /* Delta DSR */ #define UART_MSR_DCTS 0x01 /* Delta CTS */ /* * Various definitions */ #define UART_BREAK_COUNT (1) /* # of chars to count when performing break */ #define UART_CHAR_TIMEOUT (4) /* # of chars to count when performing timeout int. */
Go to most recent revision | Compare with Previous | Blame | View Log