URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [tags/] [start/] [insight/] [gdb/] [ser-e7kpc.c] - Rev 1765
Compare with Previous | Blame | View Log
/* Remote serial interface using Hitachi E7000 PC ISA card in a PC Copyright 1994, 1996, 1997, 1998, 1999, 2000 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #if defined __GO32__ || defined _WIN32 #include "defs.h" #include "serial.h" #include "gdb_string.h" #ifdef _WIN32 #define WIN32_LEAN_AND_MEAN #include <windows.h> #endif #ifdef __GO32__ #include <sys/dos.h> #endif static int e7000pc_open (serial_t scb, const char *name); static void e7000pc_raw (serial_t scb); static int e7000pc_readchar (serial_t scb, int timeout); static int e7000pc_setbaudrate (serial_t scb, int rate); static int e7000pc_write (serial_t scb, const char *str, int len); static void e7000pc_close (serial_t scb); static serial_ttystate e7000pc_get_tty_state (serial_t scb); static int e7000pc_set_tty_state (serial_t scb, serial_ttystate state); #define OFF_DPD 0x0000 #define OFF_DDP 0x1000 #define OFF_CPD 0x2000 #define OFF_CDP 0x2400 #define OFF_FA 0x3000 #define OFF_FB 0x3002 #define OFF_FC 0x3004 #define OFF_IRQTOD 0x3008 #define OFF_IRQTOP 0x300a #define OFF_READY 0x300c #define OFF_PON 0x300e #define IDLE 0x0000 #define CMD_CI 0x4349 #define CMD_CO 0x434f #define CMD_LO 0x4c4f #define CMD_LS 0x4c53 #define CMD_SV 0x5356 #define CMD_SS 0x5353 #define CMD_OK 0x4f4b #define CMD_ER 0x4552 #define CMD_NF 0x4e46 #define CMD_AB 0x4142 #define CMD_ED 0x4544 #define CMD_CE 0x4345 static unsigned long fa; static unsigned long irqtod; static unsigned long ready; static unsigned long fb; static unsigned long cpd; static unsigned long cdp; static unsigned long ready; static unsigned long pon; static unsigned long irqtop; static unsigned long board_at; #ifdef __GO32__ #define SET_BYTE(x,y) { char _buf = y;dosmemput(&_buf,1, x);} #define SET_WORD(x,y) { short _buf = y;dosmemput(&_buf,2, x);} #define GET_BYTE(x) ( dosmemget(x,1,&bb), bb) #define GET_WORD(x) ( dosmemget(x,2,&sb), sb) static unsigned char bb; static unsigned short sb; #else /* win32 */ #define SET_BYTE(x,y) *(volatile unsigned char *)(x) = (y) #define SET_WORD(x,y) *(volatile unsigned short *)(x) = (y) #define GET_BYTE(x) (*(volatile unsigned char *)(x)) #define GET_WORD(x) (*(volatile unsigned short *)(x)) #define dosmemget(FROM, LEN, TO) memcpy ((void *)(TO), (void *)(FROM), (LEN)) #define dosmemput(FROM, LEN, TO) memcpy ((void *)(TO), (void *)(FROM), (LEN)) #endif static struct sw { int sw; int addr; } sigs[] = { { 0x14, 0xd0000 } , { 0x15, 0xd4000 } , { 0x16, 0xd8000 } , { 0x17, 0xdc000 } , 0 }; #define get_ds_base() 0 static int e7000pc_init (void) { int try; unsigned long dsbase; dsbase = get_ds_base (); /* Look around in memory for the board's signature */ for (try = 0; sigs[try].sw; try++) { int val; board_at = sigs[try].addr - dsbase; fa = board_at + OFF_FA; fb = board_at + OFF_FB; cpd = board_at + OFF_CPD; cdp = board_at + OFF_CDP; ready = board_at + OFF_READY; pon = board_at + OFF_PON; irqtop = board_at + OFF_IRQTOP; irqtod = board_at + OFF_IRQTOD; val = GET_WORD (ready); if (val == (0xaaa0 | sigs[try].sw)) { if (GET_WORD (pon) & 0xf) { SET_WORD (fa, 0); SET_WORD (fb, 0); SET_WORD (irqtop, 1); /* Disable interrupts from e7000 */ SET_WORD (ready, 1); printf_filtered ("\nConnected to the E7000PC at address 0x%x\n", sigs[try].addr); return 1; } error ("The E7000 PC board is working, but the E7000 is turned off.\n"); return 0; } } error ("GDB cannot connect to the E7000 PC board, check that it is installed\n\ and that the switch settings are correct. Some other DOS programs can \n\ stop the board from working. Try starting from a very minimal boot, \n\ perhaps you need to disable EMM386 over the region where the board has\n\ its I/O space, remove other unneeded cards, etc etc\n"); return 0; } static int pbuf_size; static int pbuf_index; /* Return next byte from cdp. If no more, then return -1. */ static int e7000_get (void) { static char pbuf[1000]; char tmp[1000]; int x; if (pbuf_index < pbuf_size) { x = pbuf[pbuf_index++]; } else if ((GET_WORD (fb) & 1)) { int i; pbuf_size = GET_WORD (cdp + 2); dosmemget (cdp + 8, pbuf_size + 1, tmp); /* Tell the E7000 we've eaten */ SET_WORD (fb, 0); /* Swap it around */ for (i = 0; i < pbuf_size; i++) { pbuf[i] = tmp[i ^ 1]; } pbuf_index = 0; x = pbuf[pbuf_index++]; } else { x = -1; } return x; } /* Works just like read(), except that it takes a TIMEOUT in seconds. Note that TIMEOUT == 0 is a poll, and TIMEOUT == -1 means wait forever. */ static int dosasync_read (int fd, char *buf, int len, int timeout) { long now; long then; int i = 0; /* Then look for some more if we're still hungry */ time (&now); then = now + timeout; while (i < len) { int ch = e7000_get (); /* While there's room in the buffer, and we've already read the stuff in, suck it over */ if (ch != -1) { buf[i++] = ch; while (i < len && pbuf_index < pbuf_size) { ch = e7000_get (); if (ch == -1) break; buf[i++] = ch; } } time (&now); if (timeout == 0) return i; if (now >= then && timeout > 0) { return i; } } return len; } static int dosasync_write (int fd, const char *buf, int len) { int i; char dummy[1000]; /* Construct copy locally */ ((short *) dummy)[0] = CMD_CI; ((short *) dummy)[1] = len; ((short *) dummy)[2] = 0; ((short *) dummy)[3] = 0; for (i = 0; i < len; i++) { dummy[(8 + i) ^ 1] = buf[i]; } /* Wait for the card to get ready */ while (GET_WORD (fa) & 1); /* Blast onto the ISA card */ dosmemput (dummy, 8 + len + 1, cpd); SET_WORD (fa, 1); SET_WORD (irqtod, 1); /* Interrupt the E7000 */ return len; } static int e7000pc_open (serial_t scb, const char *name) { if (strncasecmp (name, "pc", 2) != 0) { errno = ENOENT; return -1; } scb->fd = e7000pc_init (); if (!scb->fd) return -1; return 0; } static int e7000pc_noop (serial_t scb) { return 0; } static void e7000pc_raw (serial_t scb) { /* Always in raw mode */ } static int e7000pc_readchar (serial_t scb, int timeout) { char buf; top: if (dosasync_read (scb->fd, &buf, 1, timeout)) { if (buf == 0) goto top; return buf; } else return SERIAL_TIMEOUT; } struct e7000pc_ttystate { int dummy; }; /* e7000pc_{get set}_tty_state() are both dummys to fill out the function vector. Someday, they may do something real... */ static serial_ttystate e7000pc_get_tty_state (serial_t scb) { struct e7000pc_ttystate *state; state = (struct e7000pc_ttystate *) xmalloc (sizeof *state); return (serial_ttystate) state; } static int e7000pc_set_tty_state (serial_t scb, serial_ttystate ttystate) { return 0; } static int e7000pc_noflush_set_tty_state (serial_t scb, serial_ttystate new_ttystate, serial_ttystate old_ttystate) { return 0; } static void e7000pc_print_tty_state (serial_t scb, serial_ttystate ttystate, struct ui_file *stream) { /* Nothing to print. */ return; } static int e7000pc_setbaudrate (serial_t scb, int rate) { return 0; } static int e7000pc_setstopbits (serial_t scb, int rate) { return 0; } static int e7000pc_write (serial_t scb, const char *str, int len) { dosasync_write (scb->fd, str, len); return 0; } static void e7000pc_close (serial_t scb) { } static struct serial_ops e7000pc_ops = { "pc", 0, e7000pc_open, e7000pc_close, e7000pc_readchar, e7000pc_write, e7000pc_noop, /* flush output */ e7000pc_noop, /* flush input */ e7000pc_noop, /* send break -- currently used only for nindy */ e7000pc_raw, e7000pc_get_tty_state, e7000pc_set_tty_state, e7000pc_print_tty_state, e7000pc_noflush_set_tty_state, e7000pc_setbaudrate, e7000pc_setstopbits, e7000pc_noop, /* wait for output to drain */ }; void _initialize_ser_e7000pc (void) { serial_add_interface (&e7000pc_ops); } #else void _initialize_ser_e7000pc (void) { } #endif