OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [tags/] [start/] [insight/] [tcl/] [doc/] [SetVar.3] - Rev 1765

Compare with Previous | Blame | View Log

'\"
'\" Copyright (c) 1989-1993 The Regents of the University of California.
'\" Copyright (c) 1994-1997 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\" 
'\" RCS: @(#) $Id: SetVar.3,v 1.1.1.1 2002-01-16 10:25:24 markom Exp $
'\" 
.so man.macros
.TH Tcl_SetVar 3 7.4 Tcl "Tcl Library Procedures"
.BS
.SH NAME
Tcl_SetVar, Tcl_SetVar2, Tcl_GetVar, Tcl_GetVar2, Tcl_UnsetVar, Tcl_UnsetVar2 \- manipulate Tcl variables
.SH SYNOPSIS
.nf
\fB#include <tcl.h>\fR
.sp
char *
\fBTcl_SetVar\fR(\fIinterp, varName, newValue, flags\fR)
.sp
char *
\fBTcl_SetVar2\fR(\fIinterp, name1, name2, newValue, flags\fR)
.sp
char *
\fBTcl_GetVar\fR(\fIinterp, varName, flags\fR)
.sp
char *
\fBTcl_GetVar2\fR(\fIinterp, name1, name2, flags\fR)
.sp
int
\fBTcl_UnsetVar\fR(\fIinterp, varName, flags\fR)
.sp
int
\fBTcl_UnsetVar2\fR(\fIinterp, name1, name2, flags\fR)
.SH ARGUMENTS
.AS Tcl_Interp *newValue
.AP Tcl_Interp *interp in
Interpreter containing variable.
.AP char *varName in
Name of variable.
May include a series of \fB::\fR namespace qualifiers
to specify a variable in a particular namespace.
May refer to a scalar variable or an element of
an array variable.
If the name references an element of an array, then it
must be in writable memory:  Tcl will make temporary modifications 
to it while looking up the name.
.AP char *newValue in
New value for variable.
.AP int flags in
OR-ed combination of bits providing additional information for
operation. See below for valid values.
.AP char *name1 in
Name of scalar variable, or name of array variable if \fIname2\fR
is non-NULL.
May include a series of \fB::\fR namespace qualifiers
to specify a variable in a particular namespace.
.AP char *name2 in
If non-NULL, gives name of element within array and \fIname1\fR
must refer to an array variable.
.BE

.SH DESCRIPTION
.PP
These procedures may be used to create, modify, read, and delete
Tcl variables from C code.
.PP
Note that \fBTcl_GetVar\fR and \fBTcl_SetVar\fR
have been largely replaced by the
object-based procedures \fBTcl_ObjGetVar2\fR and \fBTcl_ObjSetVar2\fR.
Those object-based procedures read, modify, and create
a variable whose name is held in a Tcl object instead of a string.
They also return a pointer to the object
which is the variable's value instead of returning a string.
Operations on objects can be faster since objects
hold an internal representation that can be manipulated more efficiently.
.PP
\fBTcl_SetVar\fR and \fBTcl_SetVar2\fR
will create a new variable or modify an existing one.
Both of these procedures set the given variable to the value
given by \fInewValue\fR, and they return a pointer to a
copy of the variable's new value, which is stored in Tcl's
variable structure.
Tcl keeps a private copy of the variable's value, so the caller
may change \fInewValue\fR after these procedures return without
affecting the value of the variable.
If an error occurs in setting the variable (e.g. an array
variable is referenced without giving an index into the array),
they return NULL.
.PP
The name of the variable may be specified to
\fBTcl_SetVar\fR and \fBTcl_SetVar2\fR in either of two ways.
If \fBTcl_SetVar\fR is called, the variable name is given as
a single string, \fIvarName\fR.
If \fIvarName\fR contains an open parenthesis and ends with a
close parenthesis, then the value between the parentheses is
treated as an index (which can have any string value) and
the characters before the first open
parenthesis are treated as the name of an array variable.
If \fIvarName\fR doesn't have parentheses as described above, then
the entire string is treated as the name of a scalar variable.
If \fBTcl_SetVar2\fR is called, then the array name and index
have been separated by the caller into two separate strings,
\fIname1\fR and \fIname2\fR respectively;  if \fIname2\fR is
zero it means that a scalar variable is being referenced.
.PP
The \fIflags\fR argument may be used to specify any of several
options to the procedures.
It consists of an OR-ed combination of the following bits.
Note that the flag bit TCL_PARSE_PART1 is only meaningful
for the procedures Tcl_SetVar2 and Tcl_GetVar2.
.TP
\fBTCL_GLOBAL_ONLY\fR
Under normal circumstances the procedures look up variables as follows:
If a procedure call is active in \fIinterp\fR,
a variable is looked up at the current level of procedure call.
Otherwise, a variable is looked up first in the current namespace,
then in the global namespace.
However, if this bit is set in \fIflags\fR then the variable
is looked up only in the global namespace
even if there is a procedure call active.
If both \fBTCL_GLOBAL_ONLY\fR and \fBTCL_NAMESPACE_ONLY\fR are given,
\fBTCL_GLOBAL_ONLY\fR is ignored.
.TP
\fBTCL_NAMESPACE_ONLY\fR
Under normal circumstances the procedures look up variables as follows:
If a procedure call is active in \fIinterp\fR,
a variable is looked up at the current level of procedure call.
Otherwise, a variable is looked up first in the current namespace,
then in the global namespace.
However, if this bit is set in \fIflags\fR then the variable
is looked up only in the current namespace
even if there is a procedure call active.
.TP
\fBTCL_LEAVE_ERR_MSG\fR
If an error is returned and this bit is set in \fIflags\fR, then
an error message will be left in the interpreter's result,
where it can be retrieved with \fBTcl_GetObjResult\fR
or \fBTcl_GetStringResult\fR.
If this flag bit isn't set then no error message is left
and the interpreter's result will not be modified.
.TP
\fBTCL_APPEND_VALUE\fR
If this bit is set then \fInewValue\fR is appended to the current
value, instead of replacing it.
If the variable is currently undefined, then this bit is ignored.
.TP
\fBTCL_LIST_ELEMENT\fR
If this bit is set, then \fInewValue\fR is converted to a valid
Tcl list element before setting (or appending to) the variable.
A separator space is appended before the new list element unless
the list element is going to be the first element in a list or
sublist (i.e. the variable's current value is empty, or contains
the single character ``{'', or ends in `` }'').
.TP
\fBTCL_PARSE_PART1\fR
If this bit is set when calling \fITcl_SetVar2\fR and \fITcl_GetVar2\fR,
\fIname1\fR may contain both an array and an element name:
if the name contains an open parenthesis and ends with a
close parenthesis, then the value between the parentheses is
treated as an element name (which can have any string value) and
the characters before the first open
parenthesis are treated as the name of an array variable.
If the flag TCL_PARSE_PART1 is given,
\fIname2\fR should be NULL since the array and element names
are taken from \fIname1\fR.
.PP
\fBTcl_GetVar\fR and \fBTcl_GetVar2\fR
return the current value of a variable.
The arguments to these procedures are treated in the same way
as the arguments to \fBTcl_SetVar\fR and \fBTcl_SetVar2\fR.
Under normal circumstances, the return value is a pointer
to the variable's value (which is stored in Tcl's variable
structure and will not change before the next call to \fBTcl_SetVar\fR
or \fBTcl_SetVar2\fR).
\fBTcl_GetVar\fR and \fBTcl_GetVar2\fR use the flag bits TCL_GLOBAL_ONLY
and TCL_LEAVE_ERR_MSG, both of
which have
the same meaning as for \fBTcl_SetVar\fR.
In addition, \fBTcl_GetVar2\fR uses the bit TCL_PARSE_PART1,
which has the same meaning as for \fBTcl_SetVar2\fR.
If an error occurs in reading the variable (e.g. the variable
doesn't exist or an array element is specified for a scalar
variable), then NULL is returned.
.PP
\fBTcl_UnsetVar\fR and \fBTcl_UnsetVar2\fR may be used to remove
a variable, so that future calls to \fBTcl_GetVar\fR or \fBTcl_GetVar2\fR
for the variable will return an error.
The arguments to these procedures are treated in the same way
as the arguments to \fBTcl_GetVar\fR and \fBTcl_GetVar2\fR.
If the variable is successfully removed then TCL_OK is returned.
If the variable cannot be removed because it doesn't exist then
TCL_ERROR is returned.
If an array element is specified, the given element is removed
but the array remains.
If an array name is specified without an index, then the entire
array is removed.

.SH "SEE ALSO"
Tcl_GetObjResult, Tcl_GetStringResult, Tcl_ObjGetVar2, Tcl_ObjSetVar2, Tcl_TraceVar

.SH KEYWORDS
array, interpreter, object, scalar, set, unset, variable

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.