URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [tags/] [tn_m001/] [gdb-5.0/] [gdb/] [doc/] [refcard.tex] - Rev 1765
Compare with Previous | Blame | View Log
%%%%%%%%%%%%%%%% gdb-refcard.tex %%%%%%%%%%%%%%%% %This file is TeX source for a reference card describing GDB, the GNU debugger. %Copyright (C) 1991, 1992, 1993, 1998 Free Software Foundation, Inc. %Permission is granted to make and distribute verbatim copies of %this reference provided the copyright notices and permission notices %are preserved on all copies. % %TeX markup is a programming language; accordingly this file is source %for a program to generate a reference. % %This program is free software; you can redistribute it and/or modify %it under the terms of the GNU General Public License as published by %the Free Software Foundation; either version 2, or (at your option) %any later version. % %This program is distributed in the hope that it will be useful, but %WITHOUT ANY WARRANTY; without even the implied warranty of %MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU %General Public License for more details. % %You can find a copy of the GNU General Public License at the URL %http://www.gnu.org/copyleft/gpl.html; or write to the Free Software %Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. % %You can contact the maintainer at: doc@cygnus.com % % Documentation Department % Cygnus Solutions % 1325 Chesapeake Terrace % Sunnyvale, CA 94089 USA % % +1 800 CYGNUS-1 % % % % 22-AUG-1993 Andreas Vogel % % Modifications made in order to handle different papersizes correctly. % You only have to set the total width and height of the paper, the % horizontal and vertical margin space measured from *paper edge* % and the interline and interspec spacing. % In order to support a new papersize, you have to fiddle with the % latter four dimensions. Just try out a few values. % All other values will be computed at process time so it should be % quite easy to support different paper sizes - only four values to % guess :-) % % To find the configuration places, just search for the string % "CONFIGURATION". % % Andreas Vogel (av@ssw.de) % % % % Uncomment the following `magnification' command if you want to print % out in a larger font. Caution! You may need larger paper. You had % best avoid using 3-column output if you try this. See the ``Three % column format'' section below if you want to print in three column % format. % %\magnification=\magstep 1 % % NOTE ON INTENTIONAL OMISSIONS: This reference card includes most GDB % commands, but due to space constraints there are some things I chose % to omit. In general, not all synonyms for commands are covered, nor % all variations of a command. % The GDB-under-Emacs section omits gdb-mode functions without default % keybindings. GDB startup options are not described. % set print sevenbit-strings, set symbol-reloading omitted. % printsyms, printpsyms, omitted since they're for GDB maintenance primarily % share omitted due to obsolescence % set check range/type omitted at least til code is in GDB. % %-------------------- Three column format ----------------------- %%%% --- To disable three column format, comment out this entire section % Three-column format for landscape printing %-------- Papersize defs: \newdimen\totalwidth \newdimen\totalheight \newdimen\hmargin \newdimen\vmargin \newdimen\secskip \newdimen\lskip \newdimen\barwidth \newdimen\barheight \newdimen\intersecwidth %% %% START CONFIGURATION - PAPERSIZE DEFINITIONS %------- Papersize params: %% US letter paper (8.5x11in) %% \totalwidth=11in % total width of paper \totalheight=8.5in % total height of paper \hmargin=.25in % horizontal margin width \vmargin=.25in % vertical margin width \secskip=1pc % space between refcard secs \lskip=2pt % extra skip between \sec entries %------- end papersize params %% %% change according to personal taste, not papersize dependent %% \barwidth=.1pt % width of the cropmark bar \barheight=2pt % height of the cropmark bar \intersecwidth=0.5em % width between \itmwid and \dfnwid %% %% END CONFIGURATION - PAPERSIZE DEFINITIONS %% %% %% values to be computed - nothing to configure %% \newdimen\fullhsize % width of area without margins \newdimen\itmwid % width of item column \newdimen\dfnwid % width of definition column \newdimen\temp % only for temporary use %% %% adjust the offsets so the margins are measured *from paper edge* %% \hoffset=-1in \advance \hoffset by \hmargin \voffset=-1in \advance \voffset by \vmargin %% %% fullhsize = totalwidth - (2 * hmargin) %% \fullhsize=\totalwidth \temp=\hmargin \multiply \temp by 2 \advance \fullhsize by -\temp %% %% hsize = (fullhsize - (4 * hmargin) - (2 * barwidth)) / 3 %% \hsize=\fullhsize \temp=\hmargin \multiply \temp by 4 \advance \hsize by -\temp \temp=\barwidth \multiply \temp by 2 \advance \hsize by -\temp \divide \hsize by 3 %% %% vsize = totalheight - (2 * vmargin) %% \vsize=\totalheight \temp=\vmargin \multiply \temp by 2 \advance \vsize by -\temp %% %% itmwid = (hsize - intersecwidth) * 1/3 %% dfnwid = (hsize - intersecwidth) * 2/3 %% \temp=\hsize \advance \temp by -\intersecwidth \divide \temp by 3 \itmwid=\temp \dfnwid=\hsize \advance \dfnwid by -\itmwid %-------- end papersize defs \def\fulline{\hbox to \fullhsize} \let\lcr=L \newbox\leftcolumn\newbox\centercolumn \output={\if L\lcr \global\setbox\leftcolumn=\columnbox \global\let\lcr=C \else \if C\lcr \global\setbox\centercolumn=\columnbox \global\let\lcr=R \else \tripleformat \global\let\lcr=L \fi \fi % \ifnum\outputpenalty>-20000 \else\dosupereject\fi } %% %% START CONFIGURATION - ALTERNATIVE FOLDING GUIDES %% %% For NO printed folding guide, %% comment out other \def\vdecor's and uncomment: %\def\vdecor{\hskip\hmargin plus1fil\hskip\barwidth plus1fil\hskip\hmargin plus1fil} %% For SOLID LINE folding guide, %% comment out other \def\vdecor's and uncomment: %\def\vdecor{\hskip\hmargin plus1fil \vrule width \barwidth \hskip\hmargin plus1fil} %% For SMALL MARKS NEAR TOP AND BOTTOM as folding guide, %% comment out other \def\vdecor's and uncomment: \def\vdecor{\hskip\hmargin plus1fil \vbox to \vsize{\hbox to \barwidth{\vrule height\barheight width\barwidth}\vfill \hbox to \barwidth{\vrule height\barheight width\barwidth}}%THIS PERCENT SIGN IS ESSENTIAL \hskip\hmargin plus1fil} %% %% END CONFIGURATION - ALTERNATIVES FOR FOLDING GUIDES %% \def\tripleformat{\shipout\vbox{\fulline{\box\leftcolumn\vdecor \box\centercolumn\vdecor \columnbox} } \advancepageno} \def\columnbox{\leftline{\pagebody}} \def\bye{\par\vfill \supereject \if R\lcr \null\vfill\eject\fi \end} %-------------------- end three column format ----------------------- %-------------------- Computer Modern font defs: -------------------- \font\bbf=cmbx10 \font\vbbf=cmbx12 \font\smrm=cmr6 \font\brm=cmr10 \font\rm=cmr7 \font\it=cmti7 \font\tt=cmtt8 %-------------------- end font defs --------------------------------- % \hyphenpenalty=5000\tolerance=2000\raggedright\raggedbottom \normalbaselineskip=9pt\baselineskip=9pt % \parindent=0pt \parskip=0pt \footline={\vbox to0pt{\hss}} % \def\ctl#1{{\tt C-#1}} \def\opt#1{{\brm[{\rm #1}]}} \def\xtra#1{\noalign{\smallskip{\tt#1}}} % \long\def\sec#1;#2\endsec{\vskip \secskip \halign{% %COL 1 (of halign): \vtop{\hsize=\itmwid\tt ##\par\vskip \lskip }\hfil %COL 2 (of halign): &\vtop{\hsize=\dfnwid\hangafter=1\hangindent=\intersecwidth \rm ##\par\vskip \lskip}\cr %Tail of \long\def fills in halign body with \sec args: \noalign{{\bbf #1}\vskip \lskip} #2 } } {\vbbf GDB QUICK REFERENCE}\hfil{\smrm GDB Version 4}\qquad \sec Essential Commands; gdb {\it program} \opt{{\it core}}&debug {\it program} \opt{using coredump {\it core}}\cr b \opt{\it file\tt:}{\it function}&set breakpoint at {\it function} \opt{in \it file}\cr run \opt{{\it arglist}}&start your program \opt{with {\it arglist}}\cr bt& backtrace: display program stack\cr p {\it expr}&display the value of an expression\cr c &continue running your program\cr n &next line, stepping over function calls\cr s &next line, stepping into function calls\cr \endsec \sec Starting GDB; gdb&start GDB, with no debugging files\cr gdb {\it program}&begin debugging {\it program}\cr gdb {\it program core}&debug coredump {\it core} produced by {\it program}\cr gdb --help&describe command line options\cr \endsec \sec Stopping GDB; quit&exit GDB; also {\tt q} or {\tt EOF} (eg \ctl{d})\cr INTERRUPT&(eg \ctl{c}) terminate current command, or send to running process\cr \endsec \sec Getting Help; help&list classes of commands\cr help {\it class}&one-line descriptions for commands in {\it class}\cr help {\it command}&describe {\it command}\cr \endsec \sec Executing your Program; run {\it arglist}&start your program with {\it arglist}\cr run&start your program with current argument list\cr run $\ldots$ <{\it inf} >{\it outf}&start your program with input, output redirected\cr \cr kill&kill running program\cr \cr tty {\it dev}&use {\it dev} as stdin and stdout for next {\tt run}\cr set args {\it arglist}&specify {\it arglist} for next {\tt run}\cr set args&specify empty argument list\cr show args&display argument list\cr \cr show env&show all environment variables\cr show env {\it var}&show value of environment variable {\it var}\cr set env {\it var} {\it string}&set environment variable {\it var}\cr unset env {\it var}&remove {\it var} from environment\cr \endsec \sec Shell Commands; cd {\it dir}&change working directory to {\it dir}\cr pwd&Print working directory\cr make $\ldots$&call ``{\tt make}''\cr shell {\it cmd}&execute arbitrary shell command string\cr \endsec \vfill \line{\smrm \opt{ } surround optional arguments \hfill $\ldots$ show one or more arguments} \vskip\baselineskip \centerline{\smrm \copyright 1998 Free Software Foundation, Inc.\qquad Permissions on back} \eject \sec Breakpoints and Watchpoints; break \opt{\it file\tt:}{\it line}\par b \opt{\it file\tt:}{\it line}&set breakpoint at {\it line} number \opt{in \it file}\par eg:\quad{\tt break main.c:37}\quad\cr break \opt{\it file\tt:}{\it func}&set breakpoint at {\it func} \opt{in \it file}\cr break +{\it offset}\par break -{\it offset}&set break at {\it offset} lines from current stop\cr break *{\it addr}&set breakpoint at address {\it addr}\cr break&set breakpoint at next instruction\cr break $\ldots$ if {\it expr}&break conditionally on nonzero {\it expr}\cr cond {\it n} \opt{\it expr}&new conditional expression on breakpoint {\it n}; make unconditional if no {\it expr}\cr tbreak $\ldots$&temporary break; disable when reached\cr rbreak {\it regex}&break on all functions matching {\it regex}\cr watch {\it expr}&set a watchpoint for expression {\it expr}\cr catch {\it event}&break at {\it event}, which may be {\tt catch}, {\tt throw}, {\tt exec}, {\tt fork}, {\tt vfork}, {\tt load}, or {\tt unload}.\cr \cr info break&show defined breakpoints\cr info watch&show defined watchpoints\cr \cr clear&delete breakpoints at next instruction\cr clear \opt{\it file\tt:}{\it fun}&delete breakpoints at entry to {\it fun}()\cr clear \opt{\it file\tt:}{\it line}&delete breakpoints on source line \cr delete \opt{{\it n}}&delete breakpoints \opt{or breakpoint {\it n}}\cr \cr disable \opt{{\it n}}&disable breakpoints \opt{or breakpoint {\it n}} \cr enable \opt{{\it n}}&enable breakpoints \opt{or breakpoint {\it n}} \cr enable once \opt{{\it n}}&enable breakpoints \opt{or breakpoint {\it n}}; disable again when reached \cr enable del \opt{{\it n}}&enable breakpoints \opt{or breakpoint {\it n}}; delete when reached \cr \cr ignore {\it n} {\it count}&ignore breakpoint {\it n}, {\it count} times\cr \cr commands {\it n}\par \qquad \opt{\tt silent}\par \qquad {\it command-list}&execute GDB {\it command-list} every time breakpoint {\it n} is reached. \opt{{\tt silent} suppresses default display}\cr end&end of {\it command-list}\cr \endsec \sec Program Stack; backtrace \opt{\it n}\par bt \opt{\it n}&print trace of all frames in stack; or of {\it n} frames---innermost if {\it n}{\tt >0}, outermost if {\it n}{\tt <0}\cr frame \opt{\it n}&select frame number {\it n} or frame at address {\it n}; if no {\it n}, display current frame\cr up {\it n}&select frame {\it n} frames up\cr down {\it n}&select frame {\it n} frames down\cr info frame \opt{\it addr}&describe selected frame, or frame at {\it addr}\cr info args&arguments of selected frame\cr info locals&local variables of selected frame\cr info reg \opt{\it rn}$\ldots$\par info all-reg \opt{\it rn}®ister values \opt{for regs {\it rn\/}} in selected frame; {\tt all-reg} includes floating point\cr \endsec \vfill\eject \sec Execution Control; continue \opt{\it count}\par c \opt{\it count}&continue running; if {\it count} specified, ignore this breakpoint next {\it count} times\cr \cr step \opt{\it count}\par s \opt{\it count}&execute until another line reached; repeat {\it count} times if specified\cr stepi \opt{\it count}\par si \opt{\it count}&step by machine instructions rather than source lines\cr \cr next \opt{\it count}\par n \opt{\it count}&execute next line, including any function calls\cr nexti \opt{\it count}\par ni \opt{\it count}&next machine instruction rather than source line\cr \cr until \opt{\it location}&run until next instruction (or {\it location})\cr finish&run until selected stack frame returns\cr return \opt{\it expr}&pop selected stack frame without executing \opt{setting return value}\cr signal {\it num}&resume execution with signal {\it s} (none if {\tt 0})\cr jump {\it line}\par jump *{\it address}&resume execution at specified {\it line} number or {\it address}\cr set var={\it expr}&evaluate {\it expr} without displaying it; use for altering program variables\cr \endsec \sec Display; print \opt{\tt/{\it f}\/} \opt{\it expr}\par p \opt{\tt/{\it f}\/} \opt{\it expr}&show value of {\it expr} \opt{or last value \tt \$} according to format {\it f}:\cr \qquad x&hexadecimal\cr \qquad d&signed decimal\cr \qquad u&unsigned decimal\cr \qquad o&octal\cr \qquad t&binary\cr \qquad a&address, absolute and relative\cr \qquad c&character\cr \qquad f&floating point\cr call \opt{\tt /{\it f}\/} {\it expr}&like {\tt print} but does not display {\tt void}\cr x \opt{\tt/{\it Nuf}\/} {\it expr}&examine memory at address {\it expr}; optional format spec follows slash\cr \quad {\it N}&count of how many units to display\cr \quad {\it u}&unit size; one of\cr &{\tt\qquad b}\ individual bytes\cr &{\tt\qquad h}\ halfwords (two bytes)\cr &{\tt\qquad w}\ words (four bytes)\cr &{\tt\qquad g}\ giant words (eight bytes)\cr \quad {\it f}&printing format. Any {\tt print} format, or\cr &{\tt\qquad s}\ null-terminated string\cr &{\tt\qquad i}\ machine instructions\cr disassem \opt{\it addr}&display memory as machine instructions\cr \endsec \sec Automatic Display; display \opt{\tt/\it f\/} {\it expr}&show value of {\it expr} each time program stops \opt{according to format {\it f}\/}\cr display&display all enabled expressions on list\cr undisplay {\it n}&remove number(s) {\it n} from list of automatically displayed expressions\cr disable disp {\it n}&disable display for expression(s) number {\it n}\cr enable disp {\it n}&enable display for expression(s) number {\it n}\cr info display&numbered list of display expressions\cr \endsec \vfill\eject \sec Expressions; {\it expr}&an expression in C, C++, or Modula-2 (including function calls), or:\cr {\it addr\/}@{\it len}&an array of {\it len} elements beginning at {\it addr}\cr {\it file}::{\it nm}&a variable or function {\it nm} defined in {\it file}\cr $\tt\{${\it type}$\tt\}${\it addr}&read memory at {\it addr} as specified {\it type}\cr \$&most recent displayed value\cr \${\it n}&{\it n}th displayed value\cr \$\$&displayed value previous to \$\cr \$\${\it n}&{\it n}th displayed value back from \$\cr \$\_&last address examined with {\tt x}\cr \$\_\_&value at address \$\_\cr \${\it var}&convenience variable; assign any value\cr \cr show values \opt{{\it n}}&show last 10 values \opt{or surrounding \${\it n}}\cr show conv&display all convenience variables\cr \endsec \sec Symbol Table; info address {\it s}&show where symbol {\it s} is stored\cr info func \opt{\it regex}&show names, types of defined functions (all, or matching {\it regex})\cr info var \opt{\it regex}&show names, types of global variables (all, or matching {\it regex})\cr whatis \opt{\it expr}\par ptype \opt{\it expr}&show data type of {\it expr} \opt{or \tt \$} without evaluating; {\tt ptype} gives more detail\cr ptype {\it type}&describe type, struct, union, or enum\cr \endsec \sec GDB Scripts; source {\it script}&read, execute GDB commands from file {\it script}\cr \cr define {\it cmd}\par \qquad {\it command-list}&create new GDB command {\it cmd}; execute script defined by {\it command-list}\cr end&end of {\it command-list}\cr document {\it cmd}\par \qquad {\it help-text}&create online documentation for new GDB command {\it cmd}\cr end&end of {\it help-text}\cr \endsec \sec Signals; handle {\it signal} {\it act}&specify GDB actions for {\it signal}:\cr \quad print&announce signal\cr \quad noprint&be silent for signal\cr \quad stop&halt execution on signal\cr \quad nostop&do not halt execution\cr \quad pass&allow your program to handle signal\cr \quad nopass&do not allow your program to see signal\cr info signals&show table of signals, GDB action for each\cr \endsec \sec Debugging Targets; target {\it type} {\it param}&connect to target machine, process, or file\cr help target&display available targets\cr attach {\it param}&connect to another process\cr detach&release target from GDB control\cr \endsec \vfill\eject \sec Controlling GDB; set {\it param} {\it value}&set one of GDB's internal parameters\cr show {\it param}&display current setting of parameter\cr \xtra{\rm Parameters understood by {\tt set} and {\tt show}:} \quad complaint {\it limit}&number of messages on unusual symbols\cr \quad confirm {\it on/off}&enable or disable cautionary queries\cr \quad editing {\it on/off}&control {\tt readline} command-line editing\cr \quad height {\it lpp}&number of lines before pause in display\cr \quad language {\it lang}&Language for GDB expressions ({\tt auto}, {\tt c} or {\tt modula-2})\cr \quad listsize {\it n}&number of lines shown by {\tt list}\cr \quad prompt {\it str}&use {\it str} as GDB prompt\cr \quad radix {\it base}&octal, decimal, or hex number representation\cr \quad verbose {\it on/off}&control messages when loading symbols\cr \quad width {\it cpl}&number of characters before line folded\cr \quad write {\it on/off}&Allow or forbid patching binary, core files (when reopened with {\tt exec} or {\tt core}) \cr \quad history $\ldots$\par \quad h $\ldots$&groups with the following options:\cr \quad h exp {\it off/on}&disable/enable {\tt readline} history expansion\cr \quad h file {\it filename}&file for recording GDB command history\cr \quad h size {\it size}&number of commands kept in history list\cr \quad h save {\it off/on}&control use of external file for command history\cr \cr \quad print $\ldots$\par \quad p $\ldots$&groups with the following options:\cr \quad p address {\it on/off}&print memory addresses in stacks, values\cr \quad p array {\it off/on}&compact or attractive format for arrays\cr \quad p demangl {\it on/off}&source (demangled) or internal form for C++ symbols\cr \quad p asm-dem {\it on/off}&demangle C++ symbols in machine-instruction output\cr \quad p elements {\it limit}&number of array elements to display\cr \quad p object {\it on/off}&print C++ derived types for objects\cr \quad p pretty {\it off/on}&struct display: compact or indented\cr \quad p union {\it on/off}&display of union members\cr \quad p vtbl {\it off/on}&display of C++ virtual function tables\cr \cr show commands&show last 10 commands\cr show commands {\it n}&show 10 commands around number {\it n}\cr show commands +&show next 10 commands\cr \endsec \sec Working Files; file \opt{\it file}&use {\it file} for both symbols and executable; with no arg, discard both\cr core \opt{\it file}&read {\it file} as coredump; or discard\cr exec \opt{\it file}&use {\it file} as executable only; or discard\cr symbol \opt{\it file}&use symbol table from {\it file}; or discard\cr load {\it file}&dynamically link {\it file\/} and add its symbols\cr add-sym {\it file} {\it addr}&read additional symbols from {\it file}, dynamically loaded at {\it addr}\cr info files&display working files and targets in use\cr path {\it dirs}&add {\it dirs} to front of path searched for executable and symbol files\cr show path&display executable and symbol file path\cr info share&list names of shared libraries currently loaded\cr \endsec \vfill\eject \sec Source Files; dir {\it names}&add directory {\it names} to front of source path\cr dir&clear source path\cr show dir&show current source path\cr \cr list&show next ten lines of source\cr list -&show previous ten lines\cr list {\it lines}&display source surrounding {\it lines}, specified as:\cr \quad{\opt{\it file\tt:}\it num}&line number \opt{in named file}\cr \quad{\opt{\it file\tt:}\it function}&beginning of function \opt{in named file}\cr \quad{\tt +\it off}&{\it off} lines after last printed\cr \quad{\tt -\it off}&{\it off} lines previous to last printed\cr \quad{\tt*\it address}&line containing {\it address}\cr list {\it f},{\it l}&from line {\it f} to line {\it l}\cr info line {\it num}&show starting, ending addresses of compiled code for source line {\it num}\cr info source&show name of current source file\cr info sources&list all source files in use\cr forw {\it regex}&search following source lines for {\it regex}\cr rev {\it regex}&search preceding source lines for {\it regex}\cr \endsec \sec GDB under GNU Emacs; M-x gdb&run GDB under Emacs\cr \ctl{h} m&describe GDB mode\cr M-s&step one line ({\tt step})\cr M-n&next line ({\tt next})\cr M-i&step one instruction ({\tt stepi})\cr \ctl{c} \ctl{f}&finish current stack frame ({\tt finish})\cr M-c&continue ({\tt cont})\cr M-u&up {\it arg} frames ({\tt up})\cr M-d&down {\it arg} frames ({\tt down})\cr \ctl{x} \&© number from point, insert at end\cr \ctl{x} SPC&(in source file) set break at point\cr \endsec \sec GDB License; show copying&Display GNU General Public License\cr show warranty&There is NO WARRANTY for GDB. Display full no-warranty statement.\cr \endsec \vfill {\smrm\parskip=6pt \centerline{Copyright \copyright 1991, '92, '93, '98 Free Software Foundation, Inc.} \centerline{Roland H. Pesch} \centerline{The author assumes no responsibility for any errors on this card.} This card may be freely distributed under the terms of the GNU General Public License. \centerline{Please contribute to development of this card by annotating it. Improvements can be sent to bug-gdb@gnu.org.} GDB itself is free software; you are welcome to distribute copies of it under the terms of the GNU General Public License. There is absolutely no warranty for GDB. } \end