URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [binutils/] [binutils-2.16.1/] [binutils-2.16.1.diff] - Rev 1616
Go to most recent revision | Compare with Previous | Blame | View Log
diff --unified -N -r ../binutils-2.16.1/bfd/bfd-in2.h binutils-2.16.1/bfd/bfd-in2.h
--- ../binutils-2.16.1/bfd/bfd-in2.h 2005-03-02 22:23:20.000000000 +0100
+++ binutils-2.16.1/bfd/bfd-in2.h 2005-12-13 15:51:29.000000000 +0100
@@ -2145,11 +2145,13 @@
i.e., byte displacements shifted right two bits. The 30-bit word
displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The
-signed 16-bit displacement is used on the MIPS, and the 23-bit
-displacement is used on the Alpha. */
+signed 16-bit displacement is used on the MIPS, the 23-bit
+displacement is used on the Alpha and the 26-bit displacement is used
+on openrisc. */
BFD_RELOC_32_PCREL_S2,
BFD_RELOC_16_PCREL_S2,
BFD_RELOC_23_PCREL_S2,
+ BFD_RELOC_28_PCREL_S2,
/* High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
the target word. These are used on the SPARC. */
diff --unified -N -r ../binutils-2.16.1/bfd/config.bfd binutils-2.16.1/bfd/config.bfd
--- ../binutils-2.16.1/bfd/config.bfd 2005-01-31 18:18:47.000000000 +0100
+++ binutils-2.16.1/bfd/config.bfd 2005-12-13 15:51:29.000000000 +0100
@@ -924,16 +924,13 @@
targ_underscore=yes
;;
- openrisc-*-elf)
- targ_defvec=bfd_elf32_openrisc_vec
- ;;
or32-*-coff)
targ_defvec=or32coff_big_vec
targ_underscore=yes
;;
- or32-*-elf | or32-*-rtems*)
+ or32-*-rtems | or32-*-elf | or32-*-*linux*)
targ_defvec=bfd_elf32_or32_big_vec
;;
diff --unified -N -r ../binutils-2.16.1/bfd/configure binutils-2.16.1/bfd/configure
--- ../binutils-2.16.1/bfd/configure 2005-06-12 20:58:46.000000000 +0200
+++ binutils-2.16.1/bfd/configure 2005-12-13 15:51:29.000000000 +0100
@@ -11588,7 +11588,6 @@
bfd_elf32_nlittlemips_vec) tb="$tb elfn32-mips.lo elfxx-mips.lo elf32.lo $elf ecofflink.lo"; target_size=64 ;;
bfd_elf32_ntradbigmips_vec) tb="$tb elfn32-mips.lo elfxx-mips.lo elf32.lo $elf ecofflink.lo"; target_size=64 ;;
bfd_elf32_ntradlittlemips_vec) tb="$tb elfn32-mips.lo elfxx-mips.lo elf32.lo $elf ecofflink.lo"; target_size=64 ;;
- bfd_elf32_openrisc_vec) tb="$tb elf32-openrisc.lo elf32.lo $elf" ;;
bfd_elf32_or32_big_vec) tb="$tb elf32-or32.lo elf32.lo $elf" ;;
bfd_elf32_pj_vec) tb="$tb elf32-pj.lo elf32.lo $elf";;
bfd_elf32_pjl_vec) tb="$tb elf32-pj.lo elf32.lo $elf";;
diff --unified -N -r ../binutils-2.16.1/bfd/configure.in binutils-2.16.1/bfd/configure.in
--- ../binutils-2.16.1/bfd/configure.in 2005-06-12 20:58:40.000000000 +0200
+++ binutils-2.16.1/bfd/configure.in 2005-12-13 15:51:29.000000000 +0100
@@ -635,7 +635,6 @@
bfd_elf32_nlittlemips_vec) tb="$tb elfn32-mips.lo elfxx-mips.lo elf32.lo $elf ecofflink.lo"; target_size=64 ;;
bfd_elf32_ntradbigmips_vec) tb="$tb elfn32-mips.lo elfxx-mips.lo elf32.lo $elf ecofflink.lo"; target_size=64 ;;
bfd_elf32_ntradlittlemips_vec) tb="$tb elfn32-mips.lo elfxx-mips.lo elf32.lo $elf ecofflink.lo"; target_size=64 ;;
- bfd_elf32_openrisc_vec) tb="$tb elf32-openrisc.lo elf32.lo $elf" ;;
bfd_elf32_or32_big_vec) tb="$tb elf32-or32.lo elf32.lo $elf" ;;
bfd_elf32_pj_vec) tb="$tb elf32-pj.lo elf32.lo $elf";;
bfd_elf32_pjl_vec) tb="$tb elf32-pj.lo elf32.lo $elf";;
diff --unified -N -r ../binutils-2.16.1/bfd/cpu-openrisc.c binutils-2.16.1/bfd/cpu-openrisc.c
--- ../binutils-2.16.1/bfd/cpu-openrisc.c 2002-11-30 09:39:36.000000000 +0100
+++ binutils-2.16.1/bfd/cpu-openrisc.c 1970-01-01 01:00:00.000000000 +0100
@@ -1,42 +0,0 @@
-/* BFD support for the OpenRISC architecture.
- Copyright 2001, 2002 Free Software Foundation, Inc.
- Contributed by Johan Rydberg, jrydberg@opencores.org
-
-This file is part of BFD, the Binary File Descriptor library.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#include "bfd.h"
-#include "sysdep.h"
-#include "libbfd.h"
-
-#define N(BITS_WORD, BITS_ADDR, NUMBER, PRINT, DEFAULT, NEXT) \
- { \
- BITS_WORD, /* bits in a word */ \
- BITS_ADDR, /* bits in an address */ \
- 8, /* 8 bits in a byte */ \
- bfd_arch_openrisc, \
- NUMBER, \
- "openrisc", \
- PRINT, \
- 2, \
- DEFAULT, \
- bfd_default_compatible, \
- bfd_default_scan, \
- NEXT, \
- }
-
-const bfd_arch_info_type bfd_openrisc_arch =
- N (32, 32, 0, "openrisc", TRUE, 0);
Binary files ../binutils-2.16.1/bfd/doc/bfd.info-2 and binutils-2.16.1/bfd/doc/bfd.info-2 differ
diff --unified -N -r ../binutils-2.16.1/bfd/elf32-openrisc.c binutils-2.16.1/bfd/elf32-openrisc.c
--- ../binutils-2.16.1/bfd/elf32-openrisc.c 2004-10-21 17:28:23.000000000 +0200
+++ binutils-2.16.1/bfd/elf32-openrisc.c 1970-01-01 01:00:00.000000000 +0100
@@ -1,613 +0,0 @@
-/* OpenRISC-specific support for 32-bit ELF.
- Copyright 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
- Contributed by Johan Rydberg, jrydberg@opencores.org
-
-This file is part of BFD, the Binary File Descriptor library.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#include "bfd.h"
-#include "sysdep.h"
-#include "libbfd.h"
-#include "elf-bfd.h"
-#include "elf/openrisc.h"
-#include "libiberty.h"
-
-/* Forward declarations. */
-
-static reloc_howto_type *openrisc_reloc_type_lookup
- PARAMS ((bfd * , bfd_reloc_code_real_type));
-static void openrisc_info_to_howto_rela
- PARAMS ((bfd *, arelent *, Elf_Internal_Rela *));
-static bfd_boolean openrisc_elf_relocate_section
- PARAMS ((bfd *, struct bfd_link_info *, bfd *, asection *, bfd_byte *,
- Elf_Internal_Rela *, Elf_Internal_Sym *, asection **));
-static bfd_reloc_status_type openrisc_final_link_relocate
- PARAMS ((reloc_howto_type *, bfd *, asection *, bfd_byte *,
- Elf_Internal_Rela *, bfd_vma));
-static bfd_boolean openrisc_elf_gc_sweep_hook
- PARAMS ((bfd *, struct bfd_link_info *, asection *,
- const Elf_Internal_Rela *));
-static asection * openrisc_elf_gc_mark_hook
- PARAMS ((asection *, struct bfd_link_info *, Elf_Internal_Rela *,
- struct elf_link_hash_entry *, Elf_Internal_Sym *));
-static bfd_boolean openrisc_elf_check_relocs
- PARAMS ((bfd *, struct bfd_link_info *, asection *,
- const Elf_Internal_Rela *));
-static bfd_boolean openrisc_elf_object_p
- PARAMS ((bfd *));
-static void openrisc_elf_final_write_processing
- PARAMS ((bfd *, bfd_boolean));
-
-
-static reloc_howto_type openrisc_elf_howto_table[] =
- {
- /* This reloc does nothing. */
- HOWTO (R_OPENRISC_NONE, /* type */
- 0, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 32, /* bitsize */
- FALSE, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_bitfield, /* complain_on_overflow */
- bfd_elf_generic_reloc, /* special_function */
- "R_OPENRISC_NONE", /* name */
- FALSE, /* partial_inplace */
- 0, /* src_mask */
- 0, /* dst_mask */
- FALSE), /* pcrel_offset */
-
- /* A PC relative 26 bit relocation, right shifted by 2. */
- HOWTO (R_OPENRISC_INSN_REL_26, /* type */
- 2, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 26, /* bitsize */
- TRUE, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_signed, /* complain_on_overflow */
- bfd_elf_generic_reloc, /* special_function */
- "R_OPENRISC_INSN_REL_26", /* name */
- FALSE, /* partial_inplace */
- 0x00000000, /* src_mask */
- 0x03ffffff, /* dst_mask */
- FALSE), /* pcrel_offset */
-
- /* A absolute 26 bit relocation, right shifted by 2. */
- HOWTO (R_OPENRISC_INSN_ABS_26, /* type */
- 2, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 26, /* bitsize */
- FALSE, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_signed, /* complain_on_overflow */
- bfd_elf_generic_reloc, /* special_function */
- "R_OPENRISC_INSN_ABS_26", /* name */
- FALSE, /* partial_inplace */
- 0x00000000, /* src_mask */
- 0x03ffffff, /* dst_mask */
- FALSE), /* pcrel_offset */
-
- HOWTO (R_OPENRISC_LO_16_IN_INSN, /* type */
- 0, /* rightshift */
- 1, /* size (0 = byte, 1 = short, 2 = long) */
- 16, /* bitsize */
- FALSE, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_dont, /* complain_on_overflow */
- bfd_elf_generic_reloc, /* special_function */
- "R_OPENRISC_LO_16_IN_INSN", /* name */
- FALSE, /* partial_inplace */
- 0, /* src_mask */
- 0x0000ffff, /* dst_mask */
- FALSE), /* pcrel_offset */
-
- HOWTO (R_OPENRISC_HI_16_IN_INSN, /* type */
- 16, /* rightshift */
- 1, /* size (0 = byte, 1 = short, 2 = long) */
- 16, /* bitsize */
- FALSE, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_dont, /* complain_on_overflow */
- bfd_elf_generic_reloc, /* special_function */
- "R_OPENRISC_HI_16_IN_INSN", /* name */
- FALSE, /* partial_inplace */
- 0, /* src_mask */
- 0x0000ffff, /* dst_mask */
- FALSE), /* pcrel_offset */
-
- /* An 8 bit absolute relocation. */
- HOWTO (R_OPENRISC_8, /* type */
- 0, /* rightshift */
- 0, /* size (0 = byte, 1 = short, 2 = long) */
- 8, /* bitsize */
- FALSE, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_bitfield, /* complain_on_overflow */
- bfd_elf_generic_reloc, /* special_function */
- "R_OPENRISC_8", /* name */
- TRUE, /* partial_inplace */
- 0x0000, /* src_mask */
- 0x00ff, /* dst_mask */
- FALSE), /* pcrel_offset */
-
- /* A 16 bit absolute relocation. */
- HOWTO (R_OPENRISC_16, /* type */
- 0, /* rightshift */
- 1, /* size (0 = byte, 1 = short, 2 = long) */
- 16, /* bitsize */
- FALSE, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_bitfield, /* complain_on_overflow */
- bfd_elf_generic_reloc, /* special_function */
- "R_OPENRISC_16", /* name */
- TRUE, /* partial_inplace */
- 0x00000000, /* src_mask */
- 0x0000ffff, /* dst_mask */
- FALSE), /* pcrel_offset */
-
- /* A 32 bit absolute relocation. */
- HOWTO (R_OPENRISC_32, /* type */
- 0, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 32, /* bitsize */
- FALSE, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_bitfield, /* complain_on_overflow */
- bfd_elf_generic_reloc, /* special_function */
- "R_OPENRISC_32", /* name */
- TRUE, /* partial_inplace */
- 0x00000000, /* src_mask */
- 0xffffffff, /* dst_mask */
- FALSE), /* pcrel_offset */
-
- /* GNU extension to record C++ vtable hierarchy */
- HOWTO (R_OPENRISC_GNU_VTINHERIT, /* type */
- 0, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 0, /* bitsize */
- FALSE, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_dont, /* complain_on_overflow */
- NULL, /* special_function */
- "R_OPENRISC_GNU_VTINHERIT", /* name */
- FALSE, /* partial_inplace */
- 0, /* src_mask */
- 0, /* dst_mask */
- FALSE), /* pcrel_offset */
-
- /* GNU extension to record C++ vtable member usage */
- HOWTO (R_OPENRISC_GNU_VTENTRY, /* type */
- 0, /* rightshift */
- 2, /* size (0 = byte, 1 = short, 2 = long) */
- 0, /* bitsize */
- FALSE, /* pc_relative */
- 0, /* bitpos */
- complain_overflow_dont, /* complain_on_overflow */
- _bfd_elf_rel_vtable_reloc_fn, /* special_function */
- "R_OPENRISC_GNU_VTENTRY", /* name */
- FALSE, /* partial_inplace */
- 0, /* src_mask */
- 0, /* dst_mask */
- FALSE), /* pcrel_offset */
-};
-
-/* Map BFD reloc types to OpenRISC ELF reloc types. */
-
-struct openrisc_reloc_map
- {
- bfd_reloc_code_real_type bfd_reloc_val;
- unsigned int openrisc_reloc_val;
- };
-
-static const struct openrisc_reloc_map openrisc_reloc_map[] =
- {
- { BFD_RELOC_NONE, R_OPENRISC_NONE },
- { BFD_RELOC_32, R_OPENRISC_32 },
- { BFD_RELOC_16, R_OPENRISC_16 },
- { BFD_RELOC_8, R_OPENRISC_8 },
- { BFD_RELOC_OPENRISC_REL_26,R_OPENRISC_INSN_REL_26 },
- { BFD_RELOC_OPENRISC_ABS_26,R_OPENRISC_INSN_ABS_26 },
- { BFD_RELOC_HI16, R_OPENRISC_HI_16_IN_INSN },
- { BFD_RELOC_LO16, R_OPENRISC_LO_16_IN_INSN },
- { BFD_RELOC_VTABLE_INHERIT, R_OPENRISC_GNU_VTINHERIT },
- { BFD_RELOC_VTABLE_ENTRY, R_OPENRISC_GNU_VTENTRY }
- };
-
-static reloc_howto_type *
-openrisc_reloc_type_lookup (abfd, code)
- bfd * abfd ATTRIBUTE_UNUSED;
- bfd_reloc_code_real_type code;
-{
- unsigned int i;
-
- for (i = ARRAY_SIZE (openrisc_reloc_map); --i;)
- if (openrisc_reloc_map[i].bfd_reloc_val == code)
- return & openrisc_elf_howto_table[openrisc_reloc_map[i].
- openrisc_reloc_val];
-
- return NULL;
-}
-
-/* Set the howto pointer for an OpenRISC ELF reloc. */
-
-static void
-openrisc_info_to_howto_rela (abfd, cache_ptr, dst)
- bfd * abfd ATTRIBUTE_UNUSED;
- arelent * cache_ptr;
- Elf_Internal_Rela * dst;
-{
- unsigned int r_type;
-
- r_type = ELF32_R_TYPE (dst->r_info);
- BFD_ASSERT (r_type < (unsigned int) R_OPENRISC_max);
- cache_ptr->howto = & openrisc_elf_howto_table[r_type];
-}
-
-/* Perform a single relocation. By default we use the standard BFD
- routines, but a few relocs, we have to do them ourselves. */
-
-static bfd_reloc_status_type
-openrisc_final_link_relocate (howto, input_bfd, input_section, contents, rel,
- relocation)
- reloc_howto_type *howto;
- bfd *input_bfd;
- asection *input_section;
- bfd_byte *contents;
- Elf_Internal_Rela *rel;
- bfd_vma relocation;
-{
- bfd_reloc_status_type r = bfd_reloc_ok;
-
- switch (howto->type)
- {
- case R_OPENRISC_LO_16_IN_INSN:
- relocation &= 0xffff;
- r = _bfd_final_link_relocate (howto, input_bfd, input_section,
- contents, rel->r_offset,
- relocation, rel->r_addend);
- break;
-
- default:
- r = _bfd_final_link_relocate (howto, input_bfd, input_section,
- contents, rel->r_offset,
- relocation, rel->r_addend);
- }
-
- return r;
-}
-
-/* Relocate an OpenRISC ELF section.
-
- The RELOCATE_SECTION function is called by the new ELF backend linker
- to handle the relocations for a section.
-
- The relocs are always passed as Rela structures; if the section
- actually uses Rel structures, the r_addend field will always be
- zero.
-
- This function is responsible for adjusting the section contents as
- necessary, and (if using Rela relocs and generating a relocatable
- output file) adjusting the reloc addend as necessary.
-
- This function does not have to worry about setting the reloc
- address or the reloc symbol index.
-
- LOCAL_SYMS is a pointer to the swapped in local symbols.
-
- LOCAL_SECTIONS is an array giving the section in the input file
- corresponding to the st_shndx field of each local symbol.
-
- The global hash table entry for the global symbols can be found
- via elf_sym_hashes (input_bfd).
-
- When generating relocatable output, this function must handle
- STB_LOCAL/STT_SECTION symbols specially. The output symbol is
- going to be the section symbol corresponding to the output
- section, which means that the addend must be adjusted
- accordingly. */
-
-static bfd_boolean
-openrisc_elf_relocate_section (output_bfd, info, input_bfd, input_section,
- contents, relocs, local_syms, local_sections)
- bfd *output_bfd;
- struct bfd_link_info *info;
- bfd *input_bfd;
- asection *input_section;
- bfd_byte *contents;
- Elf_Internal_Rela *relocs;
- Elf_Internal_Sym *local_syms;
- asection **local_sections;
-{
- Elf_Internal_Shdr *symtab_hdr;
- struct elf_link_hash_entry **sym_hashes;
- Elf_Internal_Rela *rel;
- Elf_Internal_Rela *relend;
-
- if (info->relocatable)
- return TRUE;
-
- symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr;
- sym_hashes = elf_sym_hashes (input_bfd);
- relend = relocs + input_section->reloc_count;
-
- for (rel = relocs; rel < relend; rel++)
- {
- reloc_howto_type *howto;
- unsigned long r_symndx;
- Elf_Internal_Sym *sym;
- asection *sec;
- struct elf_link_hash_entry *h;
- bfd_vma relocation;
- bfd_reloc_status_type r;
- const char *name = NULL;
- int r_type;
-
- r_type = ELF32_R_TYPE (rel->r_info);
- r_symndx = ELF32_R_SYM (rel->r_info);
-
- if (r_type == R_OPENRISC_GNU_VTINHERIT
- || r_type == R_OPENRISC_GNU_VTENTRY)
- continue;
-
- if ((unsigned int) r_type >
- (sizeof openrisc_elf_howto_table / sizeof (reloc_howto_type)))
- abort ();
-
- /* This is a final link. */
- howto = openrisc_elf_howto_table + ELF32_R_TYPE (rel->r_info);
- h = NULL;
- sym = NULL;
- sec = NULL;
-
- if (r_symndx < symtab_hdr->sh_info)
- {
- sym = local_syms + r_symndx;
- sec = local_sections[r_symndx];
- relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
-
- name = bfd_elf_string_from_elf_section
- (input_bfd, symtab_hdr->sh_link, sym->st_name);
- name = (name == NULL) ? bfd_section_name (input_bfd, sec) : name;
- }
- else
- {
- bfd_boolean unresolved_reloc, warned;
-
- RELOC_FOR_GLOBAL_SYMBOL (info, input_bfd, input_section, rel,
- r_symndx, symtab_hdr, sym_hashes,
- h, sec, relocation,
- unresolved_reloc, warned);
- }
-
- r = openrisc_final_link_relocate (howto, input_bfd, input_section,
- contents, rel, relocation);
-
- if (r != bfd_reloc_ok)
- {
- const char *msg = (const char *) NULL;
-
- switch (r)
- {
- case bfd_reloc_overflow:
- r = info->callbacks->reloc_overflow
- (info, (h ? &h->root : NULL), name, howto->name,
- (bfd_vma) 0, input_bfd, input_section, rel->r_offset);
- break;
-
- case bfd_reloc_undefined:
- r = info->callbacks->undefined_symbol
- (info, name, input_bfd, input_section, rel->r_offset, TRUE);
- break;
-
- case bfd_reloc_outofrange:
- msg = _("internal error: out of range error");
- break;
-
- case bfd_reloc_notsupported:
- msg = _("internal error: unsupported relocation error");
- break;
-
- case bfd_reloc_dangerous:
- msg = _("internal error: dangerous relocation");
- break;
-
- default:
- msg = _("internal error: unknown error");
- break;
- }
-
- if (msg)
- r = info->callbacks->warning
- (info, msg, name, input_bfd, input_section, rel->r_offset);
-
- if (!r)
- return FALSE;
- }
- }
-
- return TRUE;
-}
-
-/* Return the section that should be marked against GC for a given
- relocation. */
-
-static asection *
-openrisc_elf_gc_mark_hook (sec, info, rel, h, sym)
- asection *sec;
- struct bfd_link_info *info ATTRIBUTE_UNUSED;
- Elf_Internal_Rela *rel;
- struct elf_link_hash_entry *h;
- Elf_Internal_Sym *sym;
-{
- if (h != NULL)
- {
- switch (ELF32_R_TYPE (rel->r_info))
- {
- case R_OPENRISC_GNU_VTINHERIT:
- case R_OPENRISC_GNU_VTENTRY:
- break;
-
- default:
- switch (h->root.type)
- {
- case bfd_link_hash_defined:
- case bfd_link_hash_defweak:
- return h->root.u.def.section;
-
- case bfd_link_hash_common:
- return h->root.u.c.p->section;
-
- default:
- break;
- }
- }
- }
- else
- return bfd_section_from_elf_index (sec->owner, sym->st_shndx);
-
- return NULL;
-}
-
-/* Update the got entry reference counts for the section being removed. */
-
-static bfd_boolean
-openrisc_elf_gc_sweep_hook (abfd, info, sec, relocs)
- bfd *abfd ATTRIBUTE_UNUSED;
- struct bfd_link_info *info ATTRIBUTE_UNUSED;
- asection *sec ATTRIBUTE_UNUSED;
- const Elf_Internal_Rela *relocs ATTRIBUTE_UNUSED;
-{
- return TRUE;
-}
-
-/* Look through the relocs for a section during the first phase.
- Since we don't do .gots or .plts, we just need to consider the
- virtual table relocs for gc. */
-
-static bfd_boolean
-openrisc_elf_check_relocs (abfd, info, sec, relocs)
- bfd *abfd;
- struct bfd_link_info *info;
- asection *sec;
- const Elf_Internal_Rela *relocs;
-{
- Elf_Internal_Shdr *symtab_hdr;
- struct elf_link_hash_entry **sym_hashes, **sym_hashes_end;
- const Elf_Internal_Rela *rel;
- const Elf_Internal_Rela *rel_end;
-
- if (info->relocatable)
- return TRUE;
-
- symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
- sym_hashes = elf_sym_hashes (abfd);
- sym_hashes_end =
- sym_hashes + symtab_hdr->sh_size / sizeof (Elf32_External_Sym);
- if (!elf_bad_symtab (abfd))
- sym_hashes_end -= symtab_hdr->sh_info;
-
- rel_end = relocs + sec->reloc_count;
- for (rel = relocs; rel < rel_end; rel++)
- {
- struct elf_link_hash_entry *h;
- unsigned long r_symndx;
-
- r_symndx = ELF32_R_SYM (rel->r_info);
- if (r_symndx < symtab_hdr->sh_info)
- h = NULL;
- else
- h = sym_hashes[r_symndx - symtab_hdr->sh_info];
-
- switch (ELF32_R_TYPE (rel->r_info))
- {
- /* This relocation describes the C++ object vtable hierarchy.
- Reconstruct it for later use during GC. */
- case R_OPENRISC_GNU_VTINHERIT:
- if (!bfd_elf_gc_record_vtinherit (abfd, sec, h, rel->r_offset))
- return FALSE;
- break;
-
- /* This relocation describes which C++ vtable entries are actually
- used. Record for later use during GC. */
- case R_OPENRISC_GNU_VTENTRY:
- if (!bfd_elf_gc_record_vtentry (abfd, sec, h, rel->r_addend))
- return FALSE;
- break;
- }
- }
-
- return TRUE;
-}
-
-/* Set the right machine number. */
-
-static bfd_boolean
-openrisc_elf_object_p (abfd)
- bfd *abfd;
-{
- switch (elf_elfheader (abfd)->e_flags & 0xf)
- {
- default:
- (void) bfd_default_set_arch_mach (abfd, bfd_arch_openrisc, 0);
- break;
- }
- return TRUE;
-}
-
-/* Store the machine number in the flags field. */
-
-static void
-openrisc_elf_final_write_processing (abfd, linker)
- bfd *abfd;
- bfd_boolean linker ATTRIBUTE_UNUSED;
-{
- unsigned long val;
-
- switch (bfd_get_mach (abfd))
- {
- default:
- val = 0;
- break;
- }
-
- elf_elfheader (abfd)->e_flags &= ~0xf;
- elf_elfheader (abfd)->e_flags |= val;
-}
-
-
-#define ELF_ARCH bfd_arch_openrisc
-#define ELF_MACHINE_CODE EM_OPENRISC
-#define ELF_MACHINE_ALT1 EM_OPENRISC_OLD
-#define ELF_MAXPAGESIZE 0x1000
-
-#define TARGET_BIG_SYM bfd_elf32_openrisc_vec
-#define TARGET_BIG_NAME "elf32-openrisc"
-
-#define elf_info_to_howto_rel NULL
-#define elf_info_to_howto openrisc_info_to_howto_rela
-#define elf_backend_relocate_section openrisc_elf_relocate_section
-#define elf_backend_gc_mark_hook openrisc_elf_gc_mark_hook
-#define elf_backend_gc_sweep_hook openrisc_elf_gc_sweep_hook
-#define elf_backend_check_relocs openrisc_elf_check_relocs
-
-#define elf_backend_can_gc_sections 1
-#define elf_backend_rela_normal 1
-
-#define bfd_elf32_bfd_reloc_type_lookup openrisc_reloc_type_lookup
-
-#define elf_backend_object_p openrisc_elf_object_p
-#define elf_backend_final_write_processing openrisc_elf_final_write_processing
-
-#include "elf32-target.h"
diff --unified -N -r ../binutils-2.16.1/bfd/libbfd.h binutils-2.16.1/bfd/libbfd.h
--- ../binutils-2.16.1/bfd/libbfd.h 2005-03-02 22:23:21.000000000 +0100
+++ binutils-2.16.1/bfd/libbfd.h 2005-12-13 15:51:29.000000000 +0100
@@ -801,6 +801,7 @@
"BFD_RELOC_32_PCREL_S2",
"BFD_RELOC_16_PCREL_S2",
"BFD_RELOC_23_PCREL_S2",
+ "BFD_RELOC_28_PCREL_S2",
"BFD_RELOC_HI22",
"BFD_RELOC_LO10",
"BFD_RELOC_GPREL16",
diff --unified -N -r ../binutils-2.16.1/bfd/reloc.c binutils-2.16.1/bfd/reloc.c
--- ../binutils-2.16.1/bfd/reloc.c 2005-03-02 22:23:21.000000000 +0100
+++ binutils-2.16.1/bfd/reloc.c 2005-12-13 15:51:29.000000000 +0100
@@ -1728,13 +1728,17 @@
BFD_RELOC_16_PCREL_S2
ENUMX
BFD_RELOC_23_PCREL_S2
+ENUMX
+ BFD_RELOC_28_PCREL_S2
ENUMDOC
These PC-relative relocations are stored as word displacements --
i.e., byte displacements shifted right two bits. The 30-bit word
displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The
-signed 16-bit displacement is used on the MIPS, and the 23-bit
-displacement is used on the Alpha.
+signed 16-bit displacement is used on the MIPS, the 23-bit
+displacement is used on the Alpha and the 26-bit displacement is used
+on openrisc.
+
ENUM
BFD_RELOC_HI22
diff --unified -N -r ../binutils-2.16.1/gas/configure.tgt binutils-2.16.1/gas/configure.tgt
--- ../binutils-2.16.1/gas/configure.tgt 2005-01-31 18:18:51.000000000 +0100
+++ binutils-2.16.1/gas/configure.tgt 2005-12-13 15:51:29.000000000 +0100
@@ -316,7 +316,7 @@
ns32k-pc532-lites*) fmt=aout em=nbsd532 ;;
ns32k-*-*n*bsd*) fmt=aout em=nbsd532 ;;
- openrisc-*-*) fmt=elf ;;
+ or32-*-*linux*) fmt=elf ;;
or32-*-rtems*) fmt=elf ;;
or32-*-coff) fmt=coff ;;
Binary files ../binutils-2.16.1/gas/doc/as.info-3 and binutils-2.16.1/gas/doc/as.info-3 differ
diff --unified -N -r ../binutils-2.16.1/gas/testsuite/gas/openrisc/addi.d binutils-2.16.1/gas/testsuite/gas/openrisc/addi.d
--- ../binutils-2.16.1/gas/testsuite/gas/openrisc/addi.d 2001-05-02 20:14:30.000000000 +0200
+++ binutils-2.16.1/gas/testsuite/gas/openrisc/addi.d 1970-01-01 01:00:00.000000000 +0100
@@ -1,10 +0,0 @@
-#as:
-#objdump: -dr
-#name: addi
-
-.*: +file format .*
-
-Disassembly of section .text:
-
-00000000 <l_addi>:
- 0: 94 22 ff ff l.addi r1,r2,-1
diff --unified -N -r ../binutils-2.16.1/gas/testsuite/gas/openrisc/addi.s binutils-2.16.1/gas/testsuite/gas/openrisc/addi.s
--- ../binutils-2.16.1/gas/testsuite/gas/openrisc/addi.s 2001-05-02 20:14:30.000000000 +0200
+++ binutils-2.16.1/gas/testsuite/gas/openrisc/addi.s 1970-01-01 01:00:00.000000000 +0100
@@ -1,4 +0,0 @@
- .text
- .global l_addi
-l_addi:
- l.addi r1, r2, -1
diff --unified -N -r ../binutils-2.16.1/gas/testsuite/gas/openrisc/allinsn.d binutils-2.16.1/gas/testsuite/gas/openrisc/allinsn.d
--- ../binutils-2.16.1/gas/testsuite/gas/openrisc/allinsn.d 2001-05-02 20:14:30.000000000 +0200
+++ binutils-2.16.1/gas/testsuite/gas/openrisc/allinsn.d 1970-01-01 01:00:00.000000000 +0100
@@ -1,201 +0,0 @@
-#as:
-#objdump: -dr
-#name: allinsn
-
-.*: +file format .*
-
-Disassembly of section .text:
-
-00000000 <l_j>:
- 0: 00 00 00 00 l.j 0 <l_j>
- 0: R_OPENRISC_INSN_ABS_26 .text
-
-00000004 <l_jal>:
- 4: 04 00 00 00 l.jal 0 <l_j>
- 4: R_OPENRISC_INSN_ABS_26 .text
-
-00000008 <l_jr>:
- 8: 14 00 00 00 l.jr r0
-
-0000000c <l_jalr>:
- c: 14 20 00 00 l.jalr r0
-
-00000010 <l_bal>:
- 10: 0b ff ff fc l.bal 0 <l_j>
-
-00000014 <l_bnf>:
- 14: 0f ff ff fb l.bnf 0 <l_j>
-
-00000018 <l_bf>:
- 18: 13 ff ff fa l.bf 0 <l_j>
-
-0000001c <l_brk>:
- 1c: 17 00 00 00 l.brk 0x0
-
-00000020 <l_rfe>:
- 20: 14 40 00 00 l.rfe r0
-
-00000024 <l_sys>:
- 24: 16 00 00 00 l.sys 0x0
-
-00000028 <l_nop>:
- 28: 15 00 00 00 l.nop
-
-0000002c <l_movhi>:
- 2c: 18 00 00 00 l.movhi r0,0
-
-00000030 <l_mfsr>:
- 30: 1c 00 00 00 l.mfsr r0,r0
-
-00000034 <l_mtsr>:
- 34: 40 00 00 00 l.mtsr r0,r0
-
-00000038 <l_lw>:
- 38: 80 00 00 00 l.lw r0,0\(r0\)
-
-0000003c <l_lbz>:
- 3c: 84 00 00 00 l.lbz r0,0\(r0\)
-
-00000040 <l_lbs>:
- 40: 88 00 00 00 l.lbs r0,0\(r0\)
-
-00000044 <l_lhz>:
- 44: 8c 00 00 00 l.lhz r0,0\(r0\)
-
-00000048 <l_lhs>:
- 48: 90 00 00 00 l.lhs r0,0\(r0\)
-
-0000004c <l_sw>:
- 4c: d4 00 00 00 l.sw 0\(r0\),r0
-
-00000050 <l_sb>:
- 50: d8 00 00 00 l.sb 0\(r0\),r0
-
-00000054 <l_sh>:
- 54: dc 00 00 00 l.sh 0\(r0\),r0
-
-00000058 <l_sll>:
- 58: e0 00 00 08 l.sll r0,r0,r0
-
-0000005c <l_slli>:
- 5c: b4 00 00 00 l.slli r0,r0,0x0
-
-00000060 <l_srl>:
- 60: e0 00 00 28 l.srl r0,r0,r0
-
-00000064 <l_srli>:
- 64: b4 00 00 20 l.srli r0,r0,0x0
-
-00000068 <l_sra>:
- 68: e0 00 00 48 l.sra r0,r0,r0
-
-0000006c <l_srai>:
- 6c: b4 00 00 40 l.srai r0,r0,0x0
-
-00000070 <l_ror>:
- 70: e0 00 00 88 l.ror r0,r0,r0
-
-00000074 <l_rori>:
- 74: b4 00 00 80 l.rori r0,r0,0x0
-
-00000078 <l_add>:
- 78: e0 00 00 00 l.add r0,r0,r0
-
-0000007c <l_addi>:
- 7c: 94 00 00 00 l.addi r0,r0,0
-
-00000080 <l_sub>:
- 80: e0 00 00 02 l.sub r0,r0,r0
-
-00000084 <l_subi>:
- 84: 9c 00 00 00 l.subi r0,r0,0
-
-00000088 <l_and>:
- 88: e0 00 00 03 l.and r0,r0,r0
-
-0000008c <l_andi>:
- 8c: a0 00 00 00 l.andi r0,r0,0
-
-00000090 <l_or>:
- 90: e0 00 00 04 l.or r0,r0,r0
-
-00000094 <l_ori>:
- 94: a4 00 00 00 l.ori r0,r0,0
-
-00000098 <l_xor>:
- 98: e0 00 00 05 l.xor r0,r0,r0
-
-0000009c <l_xori>:
- 9c: a8 00 00 00 l.xori r0,r0,0
-
-000000a0 <l_mul>:
- a0: e0 00 00 06 l.mul r0,r0,r0
-
-000000a4 <l_muli>:
- a4: ac 00 00 00 l.muli r0,r0,0
-
-000000a8 <l_div>:
- a8: e0 00 00 09 l.div r0,r0,r0
-
-000000ac <l_divu>:
- ac: e0 00 00 0a l.divu r0,r0,r0
-
-000000b0 <l_sfgts>:
- b0: e4 c0 00 00 l.sfgts r0,r0
-
-000000b4 <l_sfgtu>:
- b4: e4 40 00 00 l.sfgtu r0,r0
-
-000000b8 <l_sfges>:
- b8: e4 e0 00 00 l.sfges r0,r0
-
-000000bc <l_sfgeu>:
- bc: e4 60 00 00 l.sfgeu r0,r0
-
-000000c0 <l_sflts>:
- c0: e5 00 00 00 l.sflts r0,r0
-
-000000c4 <l_sfltu>:
- c4: e4 80 00 00 l.sfltu r0,r0
-
-000000c8 <l_sfles>:
- c8: e5 20 00 00 l.sfles r0,r0
-
-000000cc <l_sfleu>:
- cc: e4 a0 00 00 l.sfleu r0,r0
-
-000000d0 <l_sfgtsi>:
- d0: b8 c0 00 00 l.sfgtsi r0,0
-
-000000d4 <l_sfgtui>:
- d4: b8 40 00 00 l.sfgtui r0,0x0
-
-000000d8 <l_sfgesi>:
- d8: b8 e0 00 00 l.sfgesi r0,0
-
-000000dc <l_sfgeui>:
- dc: b8 60 00 00 l.sfgeui r0,0x0
-
-000000e0 <l_sfltsi>:
- e0: b9 00 00 00 l.sfltsi r0,0
-
-000000e4 <l_sfltui>:
- e4: b8 80 00 00 l.sfltui r0,0x0
-
-000000e8 <l_sflesi>:
- e8: b9 20 00 00 l.sflesi r0,0
-
-000000ec <l_sfleui>:
- ec: b8 a0 00 00 l.sfleui r0,0x0
-
-000000f0 <l_sfeq>:
- f0: e4 00 00 00 l.sfeq r0,r0
-
-000000f4 <l_sfeqi>:
- f4: b8 00 00 00 l.sfeqi r0,0
-
-000000f8 <l_sfne>:
- f8: e4 20 00 00 l.sfne r0,r0
-
-000000fc <l_sfnei>:
- fc: b8 20 00 00 l.sfnei r0,0
diff --unified -N -r ../binutils-2.16.1/gas/testsuite/gas/openrisc/allinsn.exp binutils-2.16.1/gas/testsuite/gas/openrisc/allinsn.exp
--- ../binutils-2.16.1/gas/testsuite/gas/openrisc/allinsn.exp 2001-05-02 20:14:30.000000000 +0200
+++ binutils-2.16.1/gas/testsuite/gas/openrisc/allinsn.exp 1970-01-01 01:00:00.000000000 +0100
@@ -1,8 +0,0 @@
-# OpenRISC assembler testsuite.
-
-if [istarget openrisc*-*-*] {
- run_dump_test "allinsn"
- run_dump_test "addi"
- run_dump_test "lohi"
- run_dump_test "store"
-}
diff --unified -N -r ../binutils-2.16.1/gas/testsuite/gas/openrisc/allinsn.s binutils-2.16.1/gas/testsuite/gas/openrisc/allinsn.s
--- ../binutils-2.16.1/gas/testsuite/gas/openrisc/allinsn.s 2001-05-02 20:14:30.000000000 +0200
+++ binutils-2.16.1/gas/testsuite/gas/openrisc/allinsn.s 1970-01-01 01:00:00.000000000 +0100
@@ -1,260 +0,0 @@
- .data
-foodata: .word 42
- .text
-footext:
- .text
- .global l_j
-l_j:
- l.j footext
- .text
- .global l_jal
-l_jal:
- l.jal footext
- .text
- .global l_jr
-l_jr:
- l.jr r0
- .text
- .global l_jalr
-l_jalr:
- l.jalr r0
- .text
- .global l_bal
-l_bal:
- l.bal footext
- .text
- .global l_bnf
-l_bnf:
- l.bnf footext
- .text
- .global l_bf
-l_bf:
- l.bf footext
- .text
- .global l_brk
-l_brk:
- l.brk 0
- .text
- .global l_rfe
-l_rfe:
- l.rfe r0
- .text
- .global l_sys
-l_sys:
- l.sys 0
- .text
- .global l_nop
-l_nop:
- l.nop
- .text
- .global l_movhi
-l_movhi:
- l.movhi r0,0
- .text
- .global l_mfsr
-l_mfsr:
- l.mfsr r0,r0
- .text
- .global l_mtsr
-l_mtsr:
- l.mtsr r0,r0
- .text
- .global l_lw
-l_lw:
- l.lw r0,0(r0)
- .text
- .global l_lbz
-l_lbz:
- l.lbz r0,0(r0)
- .text
- .global l_lbs
-l_lbs:
- l.lbs r0,0(r0)
- .text
- .global l_lhz
-l_lhz:
- l.lhz r0,0(r0)
- .text
- .global l_lhs
-l_lhs:
- l.lhs r0,0(r0)
- .text
- .global l_sw
-l_sw:
- l.sw 0(r0),r0
- .text
- .global l_sb
-l_sb:
- l.sb 0(r0),r0
- .text
- .global l_sh
-l_sh:
- l.sh 0(r0),r0
- .text
- .global l_sll
-l_sll:
- l.sll r0,r0,r0
- .text
- .global l_slli
-l_slli:
- l.slli r0,r0,0
- .text
- .global l_srl
-l_srl:
- l.srl r0,r0,r0
- .text
- .global l_srli
-l_srli:
- l.srli r0,r0,0
- .text
- .global l_sra
-l_sra:
- l.sra r0,r0,r0
- .text
- .global l_srai
-l_srai:
- l.srai r0,r0,0
- .text
- .global l_ror
-l_ror:
- l.ror r0,r0,r0
- .text
- .global l_rori
-l_rori:
- l.rori r0,r0,0
- .text
- .global l_add
-l_add:
- l.add r0,r0,r0
- .text
- .global l_addi
-l_addi:
- l.addi r0,r0,0
- .text
- .global l_sub
-l_sub:
- l.sub r0,r0,r0
- .text
- .global l_subi
-l_subi:
- l.subi r0,r0,0
- .text
- .global l_and
-l_and:
- l.and r0,r0,r0
- .text
- .global l_andi
-l_andi:
- l.andi r0,r0,0
- .text
- .global l_or
-l_or:
- l.or r0,r0,r0
- .text
- .global l_ori
-l_ori:
- l.ori r0,r0,0
- .text
- .global l_xor
-l_xor:
- l.xor r0,r0,r0
- .text
- .global l_xori
-l_xori:
- l.xori r0,r0,0
- .text
- .global l_mul
-l_mul:
- l.mul r0,r0,r0
- .text
- .global l_muli
-l_muli:
- l.muli r0,r0,0
- .text
- .global l_div
-l_div:
- l.div r0,r0,r0
- .text
- .global l_divu
-l_divu:
- l.divu r0,r0,r0
- .text
- .global l_sfgts
-l_sfgts:
- l.sfgts r0,r0
- .text
- .global l_sfgtu
-l_sfgtu:
- l.sfgtu r0,r0
- .text
- .global l_sfges
-l_sfges:
- l.sfges r0,r0
- .text
- .global l_sfgeu
-l_sfgeu:
- l.sfgeu r0,r0
- .text
- .global l_sflts
-l_sflts:
- l.sflts r0,r0
- .text
- .global l_sfltu
-l_sfltu:
- l.sfltu r0,r0
- .text
- .global l_sfles
-l_sfles:
- l.sfles r0,r0
- .text
- .global l_sfleu
-l_sfleu:
- l.sfleu r0,r0
- .text
- .global l_sfgtsi
-l_sfgtsi:
- l.sfgtsi r0,0
- .text
- .global l_sfgtui
-l_sfgtui:
- l.sfgtui r0,0
- .text
- .global l_sfgesi
-l_sfgesi:
- l.sfgesi r0,0
- .text
- .global l_sfgeui
-l_sfgeui:
- l.sfgeui r0,0
- .text
- .global l_sfltsi
-l_sfltsi:
- l.sfltsi r0,0
- .text
- .global l_sfltui
-l_sfltui:
- l.sfltui r0,0
- .text
- .global l_sflesi
-l_sflesi:
- l.sflesi r0,0
- .text
- .global l_sfleui
-l_sfleui:
- l.sfleui r0,0
- .text
- .global l_sfeq
-l_sfeq:
- l.sfeq r0,r0
- .text
- .global l_sfeqi
-l_sfeqi:
- l.sfeqi r0,0
- .text
- .global l_sfne
-l_sfne:
- l.sfne r0,r0
- .text
- .global l_sfnei
-l_sfnei:
- l.sfnei r0,0
diff --unified -N -r ../binutils-2.16.1/gas/testsuite/gas/openrisc/lohi.d binutils-2.16.1/gas/testsuite/gas/openrisc/lohi.d
--- ../binutils-2.16.1/gas/testsuite/gas/openrisc/lohi.d 2001-05-02 20:14:30.000000000 +0200
+++ binutils-2.16.1/gas/testsuite/gas/openrisc/lohi.d 1970-01-01 01:00:00.000000000 +0100
@@ -1,13 +0,0 @@
-#as:
-#objdump: -dr
-#name: lohi
-
-.*: +file format .*
-
-Disassembly of section .text:
-
-00000000 <l_lo>:
- 0: 94 21 be ef l.addi r1,r1,-16657
-
-00000004 <l_hi>:
- 4: 18 20 de ad l.movhi r1,-8531
diff --unified -N -r ../binutils-2.16.1/gas/testsuite/gas/openrisc/lohi.s binutils-2.16.1/gas/testsuite/gas/openrisc/lohi.s
--- ../binutils-2.16.1/gas/testsuite/gas/openrisc/lohi.s 2001-05-02 20:14:30.000000000 +0200
+++ binutils-2.16.1/gas/testsuite/gas/openrisc/lohi.s 1970-01-01 01:00:00.000000000 +0100
@@ -1,7 +0,0 @@
- .text
- .global l_lo
-l_lo:
- l.addi r1, r1, lo(0xdeadbeef)
- .global l_hi
-l_hi:
- l.movhi r1, hi(0xdeadbeef)
diff --unified -N -r ../binutils-2.16.1/gas/testsuite/gas/openrisc/store.d binutils-2.16.1/gas/testsuite/gas/openrisc/store.d
--- ../binutils-2.16.1/gas/testsuite/gas/openrisc/store.d 2001-05-02 20:14:30.000000000 +0200
+++ binutils-2.16.1/gas/testsuite/gas/openrisc/store.d 1970-01-01 01:00:00.000000000 +0100
@@ -1,13 +0,0 @@
-#as:
-#objdump: -dr
-#name: store
-
-.*: +file format .*
-
-Disassembly of section .text:
-
-00000000 <l_sw>:
- 0: d7 e1 0f fc l.sw -4\(r1\),r1
-
-00000004 <l_lw>:
- 4: 80 21 ff 9c l.lw r1,-100\(r1\)
diff --unified -N -r ../binutils-2.16.1/gas/testsuite/gas/openrisc/store.s binutils-2.16.1/gas/testsuite/gas/openrisc/store.s
--- ../binutils-2.16.1/gas/testsuite/gas/openrisc/store.s 2001-05-02 20:14:30.000000000 +0200
+++ binutils-2.16.1/gas/testsuite/gas/openrisc/store.s 1970-01-01 01:00:00.000000000 +0100
@@ -1,7 +0,0 @@
- .text
- .global l_sw
-l_sw:
- l.sw -4(r1), r1
- .global l_lw
-l_lw:
- l.lw r1, -100(r1)
diff --unified -N -r ../binutils-2.16.1/include/elf/openrisc.h binutils-2.16.1/include/elf/openrisc.h
--- ../binutils-2.16.1/include/elf/openrisc.h 2001-04-24 17:08:16.000000000 +0200
+++ binutils-2.16.1/include/elf/openrisc.h 1970-01-01 01:00:00.000000000 +0100
@@ -1,39 +0,0 @@
-/* OpenRISC ELF support for BFD.
- Copyright 2001 Free Software Foundation, Inc.
-
-This file is part of BFD, the Binary File Descriptor library.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software Foundation, Inc.,
-59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-#ifndef _ELF_OPENRISC_H
-#define _ELF_OPENRISC_H
-
-#include "elf/reloc-macros.h"
-
-/* Relocations. */
-START_RELOC_NUMBERS (elf_openrisc_reloc_type)
- RELOC_NUMBER (R_OPENRISC_NONE, 0)
- RELOC_NUMBER (R_OPENRISC_INSN_REL_26, 1)
- RELOC_NUMBER (R_OPENRISC_INSN_ABS_26, 2)
- RELOC_NUMBER (R_OPENRISC_LO_16_IN_INSN, 3)
- RELOC_NUMBER (R_OPENRISC_HI_16_IN_INSN, 4)
- RELOC_NUMBER (R_OPENRISC_8, 5)
- RELOC_NUMBER (R_OPENRISC_16, 6)
- RELOC_NUMBER (R_OPENRISC_32, 7)
- RELOC_NUMBER (R_OPENRISC_GNU_VTINHERIT, 8)
- RELOC_NUMBER (R_OPENRISC_GNU_VTENTRY, 9)
-END_RELOC_NUMBERS (R_OPENRISC_max)
-
-#endif /* _ELF_OPENRISC_H */
diff --unified -N -r ../binutils-2.16.1/ld/configure.tgt binutils-2.16.1/ld/configure.tgt
--- ../binutils-2.16.1/ld/configure.tgt 2005-02-08 20:54:27.000000000 +0100
+++ binutils-2.16.1/ld/configure.tgt 2005-12-13 15:51:29.000000000 +0100
@@ -478,7 +478,7 @@
z8k-*-coff) targ_emul=z8002; targ_extra_emuls=z8001 ;;
ns32k-pc532-mach* | ns32k-pc532-ux*) targ_emul=pc532macha ;;
ns32k-*-netbsd* | ns32k-pc532-lites*) targ_emul=ns32knbsd ;;
-openrisc-*-*) targ_emul=elf32openrisc ;;
+or32-*-*linux*) targ_emul=or32elf ;;
or32-*-coff) targ_emul=or32 ;;
or32-*-elf) targ_emul=or32elf ;;
or32-*-rtems*) targ_emul=or32elf ;;
diff --unified -N -r ../binutils-2.16.1/ld/emulparams/elf32openrisc.sh binutils-2.16.1/ld/emulparams/elf32openrisc.sh
--- ../binutils-2.16.1/ld/emulparams/elf32openrisc.sh 2001-05-02 20:14:30.000000000 +0200
+++ binutils-2.16.1/ld/emulparams/elf32openrisc.sh 1970-01-01 01:00:00.000000000 +0100
@@ -1,10 +0,0 @@
-MACHINE=
-SCRIPT_NAME=elf
-OUTPUT_FORMAT="elf32-openrisc"
-TEXT_START_ADDR=0x10000
-ARCH=openrisc
-MAXPAGESIZE=0x1000
-ENTRY=_start
-EMBEDDED=yes
-NOP=0x15000000
-
diff --unified -N -r ../binutils-2.16.1/opcodes/configure binutils-2.16.1/opcodes/configure
--- ../binutils-2.16.1/opcodes/configure 2005-01-31 21:30:37.000000000 +0100
+++ binutils-2.16.1/opcodes/configure 2005-12-13 15:51:29.000000000 +0100
@@ -8629,7 +8629,6 @@
bfd_mn10300_arch) ta="$ta m10300-dis.lo m10300-opc.lo" ;;
bfd_msp430_arch) ta="$ta msp430-dis.lo" ;;
bfd_ns32k_arch) ta="$ta ns32k-dis.lo" ;;
- bfd_openrisc_arch) ta="$ta openrisc-asm.lo openrisc-desc.lo openrisc-dis.lo openrisc-ibld.lo openrisc-opc.lo" using_cgen=yes ;;
bfd_or32_arch) ta="$ta or32-dis.lo or32-opc.lo" using_cgen=yes ;;
bfd_pdp11_arch) ta="$ta pdp11-dis.lo pdp11-opc.lo" ;;
bfd_pj_arch) ta="$ta pj-dis.lo pj-opc.lo" ;;
diff --unified -N -r ../binutils-2.16.1/opcodes/configure.in binutils-2.16.1/opcodes/configure.in
--- ../binutils-2.16.1/opcodes/configure.in 2004-11-08 14:17:37.000000000 +0100
+++ binutils-2.16.1/opcodes/configure.in 2005-12-13 15:51:29.000000000 +0100
@@ -206,7 +206,6 @@
bfd_mn10300_arch) ta="$ta m10300-dis.lo m10300-opc.lo" ;;
bfd_msp430_arch) ta="$ta msp430-dis.lo" ;;
bfd_ns32k_arch) ta="$ta ns32k-dis.lo" ;;
- bfd_openrisc_arch) ta="$ta openrisc-asm.lo openrisc-desc.lo openrisc-dis.lo openrisc-ibld.lo openrisc-opc.lo" using_cgen=yes ;;
bfd_or32_arch) ta="$ta or32-dis.lo or32-opc.lo" using_cgen=yes ;;
bfd_pdp11_arch) ta="$ta pdp11-dis.lo pdp11-opc.lo" ;;
bfd_pj_arch) ta="$ta pj-dis.lo pj-opc.lo" ;;
diff --unified -N -r ../binutils-2.16.1/opcodes/openrisc-asm.c binutils-2.16.1/opcodes/openrisc-asm.c
--- ../binutils-2.16.1/opcodes/openrisc-asm.c 2005-02-23 17:04:39.000000000 +0100
+++ binutils-2.16.1/opcodes/openrisc-asm.c 1970-01-01 01:00:00.000000000 +0100
@@ -1,675 +0,0 @@
-/* Assembler interface for targets using CGEN. -*- C -*-
- CGEN: Cpu tools GENerator
-
-THIS FILE IS MACHINE GENERATED WITH CGEN.
-- the resultant file is machine generated, cgen-asm.in isn't
-
-Copyright 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-
-This file is part of the GNU Binutils and GDB, the GNU debugger.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software Foundation, Inc.,
-59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-/* ??? Eventually more and more of this stuff can go to cpu-independent files.
- Keep that in mind. */
-
-#include "sysdep.h"
-#include <stdio.h>
-#include "ansidecl.h"
-#include "bfd.h"
-#include "symcat.h"
-#include "openrisc-desc.h"
-#include "openrisc-opc.h"
-#include "opintl.h"
-#include "xregex.h"
-#include "libiberty.h"
-#include "safe-ctype.h"
-
-#undef min
-#define min(a,b) ((a) < (b) ? (a) : (b))
-#undef max
-#define max(a,b) ((a) > (b) ? (a) : (b))
-
-static const char * parse_insn_normal
- (CGEN_CPU_DESC, const CGEN_INSN *, const char **, CGEN_FIELDS *);
-
-/* -- assembler routines inserted here. */
-
-/* -- asm.c */
-
-#define CGEN_VERBOSE_ASSEMBLER_ERRORS
-
-static const char * parse_hi16
- PARAMS ((CGEN_CPU_DESC, const char **, int, long *));
-static const char * parse_lo16
- PARAMS ((CGEN_CPU_DESC, const char **, int, long *));
-
-long
-openrisc_sign_extend_16bit (value)
- long value;
-{
- return ((value & 0xffff) ^ 0x8000) - 0x8000;
-}
-
-/* Handle hi(). */
-
-static const char *
-parse_hi16 (cd, strp, opindex, valuep)
- CGEN_CPU_DESC cd;
- const char **strp;
- int opindex;
- long *valuep;
-{
- const char *errmsg;
- enum cgen_parse_operand_result result_type;
- unsigned long ret;
-
- if (**strp == '#')
- ++*strp;
-
- if (strncasecmp (*strp, "hi(", 3) == 0)
- {
- bfd_vma value;
-
- *strp += 3;
- errmsg = cgen_parse_address (cd, strp, opindex, BFD_RELOC_HI16,
- &result_type, &value);
- if (**strp != ')')
- return _("missing `)'");
-
- ++*strp;
- if (errmsg == NULL
- && result_type == CGEN_PARSE_OPERAND_RESULT_NUMBER)
- value >>= 16;
- ret = value;
- }
- else
- {
- if (**strp == '-')
- {
- long value;
-
- errmsg = cgen_parse_signed_integer (cd, strp, opindex, &value);
- ret = value;
- }
- else
- {
- unsigned long value;
-
- errmsg = cgen_parse_unsigned_integer (cd, strp, opindex, &value);
- ret = value;
- }
- }
-
- *valuep = ((ret & 0xffff) ^ 0x8000) - 0x8000;
- return errmsg;
-}
-
-/* Handle lo(). */
-
-static const char *
-parse_lo16 (cd, strp, opindex, valuep)
- CGEN_CPU_DESC cd;
- const char **strp;
- int opindex;
- long *valuep;
-{
- const char *errmsg;
- enum cgen_parse_operand_result result_type;
- unsigned long ret;
-
- if (**strp == '#')
- ++*strp;
-
- if (strncasecmp (*strp, "lo(", 3) == 0)
- {
- bfd_vma value;
-
- *strp += 3;
- errmsg = cgen_parse_address (cd, strp, opindex, BFD_RELOC_LO16,
- &result_type, &value);
- if (**strp != ')')
- return _("missing `)'");
-
- ++*strp;
- ret = value;
- }
- else
- {
- if (**strp == '-')
- {
- long value;
-
- errmsg = cgen_parse_signed_integer (cd, strp, opindex, &value);
- ret = value;
- }
- else
- {
- unsigned long value;
-
- errmsg = cgen_parse_unsigned_integer (cd, strp, opindex, &value);
- ret = value;
- }
- }
-
- *valuep = ((ret & 0xffff) ^ 0x8000) - 0x8000;
- return errmsg;
-}
-
-/* -- */
-
-const char * openrisc_cgen_parse_operand
- PARAMS ((CGEN_CPU_DESC, int, const char **, CGEN_FIELDS *));
-
-/* Main entry point for operand parsing.
-
- This function is basically just a big switch statement. Earlier versions
- used tables to look up the function to use, but
- - if the table contains both assembler and disassembler functions then
- the disassembler contains much of the assembler and vice-versa,
- - there's a lot of inlining possibilities as things grow,
- - using a switch statement avoids the function call overhead.
-
- This function could be moved into `parse_insn_normal', but keeping it
- separate makes clear the interface between `parse_insn_normal' and each of
- the handlers. */
-
-const char *
-openrisc_cgen_parse_operand (cd, opindex, strp, fields)
- CGEN_CPU_DESC cd;
- int opindex;
- const char ** strp;
- CGEN_FIELDS * fields;
-{
- const char * errmsg = NULL;
- /* Used by scalar operands that still need to be parsed. */
- long junk ATTRIBUTE_UNUSED;
-
- switch (opindex)
- {
- case OPENRISC_OPERAND_ABS_26 :
- {
- bfd_vma value;
- errmsg = cgen_parse_address (cd, strp, OPENRISC_OPERAND_ABS_26, 0, NULL, & value);
- fields->f_abs26 = value;
- }
- break;
- case OPENRISC_OPERAND_DISP_26 :
- {
- bfd_vma value;
- errmsg = cgen_parse_address (cd, strp, OPENRISC_OPERAND_DISP_26, 0, NULL, & value);
- fields->f_disp26 = value;
- }
- break;
- case OPENRISC_OPERAND_HI16 :
- errmsg = parse_hi16 (cd, strp, OPENRISC_OPERAND_HI16, (long *) (& fields->f_simm16));
- break;
- case OPENRISC_OPERAND_LO16 :
- errmsg = parse_lo16 (cd, strp, OPENRISC_OPERAND_LO16, (long *) (& fields->f_lo16));
- break;
- case OPENRISC_OPERAND_OP_F_23 :
- errmsg = cgen_parse_unsigned_integer (cd, strp, OPENRISC_OPERAND_OP_F_23, (unsigned long *) (& fields->f_op4));
- break;
- case OPENRISC_OPERAND_OP_F_3 :
- errmsg = cgen_parse_unsigned_integer (cd, strp, OPENRISC_OPERAND_OP_F_3, (unsigned long *) (& fields->f_op5));
- break;
- case OPENRISC_OPERAND_RA :
- errmsg = cgen_parse_keyword (cd, strp, & openrisc_cgen_opval_h_gr, & fields->f_r2);
- break;
- case OPENRISC_OPERAND_RB :
- errmsg = cgen_parse_keyword (cd, strp, & openrisc_cgen_opval_h_gr, & fields->f_r3);
- break;
- case OPENRISC_OPERAND_RD :
- errmsg = cgen_parse_keyword (cd, strp, & openrisc_cgen_opval_h_gr, & fields->f_r1);
- break;
- case OPENRISC_OPERAND_SIMM_16 :
- errmsg = cgen_parse_signed_integer (cd, strp, OPENRISC_OPERAND_SIMM_16, (long *) (& fields->f_simm16));
- break;
- case OPENRISC_OPERAND_UI16NC :
- errmsg = parse_lo16 (cd, strp, OPENRISC_OPERAND_UI16NC, (long *) (& fields->f_i16nc));
- break;
- case OPENRISC_OPERAND_UIMM_16 :
- errmsg = cgen_parse_unsigned_integer (cd, strp, OPENRISC_OPERAND_UIMM_16, (unsigned long *) (& fields->f_uimm16));
- break;
- case OPENRISC_OPERAND_UIMM_5 :
- errmsg = cgen_parse_unsigned_integer (cd, strp, OPENRISC_OPERAND_UIMM_5, (unsigned long *) (& fields->f_uimm5));
- break;
-
- default :
- /* xgettext:c-format */
- fprintf (stderr, _("Unrecognized field %d while parsing.\n"), opindex);
- abort ();
- }
-
- return errmsg;
-}
-
-cgen_parse_fn * const openrisc_cgen_parse_handlers[] =
-{
- parse_insn_normal,
-};
-
-void
-openrisc_cgen_init_asm (cd)
- CGEN_CPU_DESC cd;
-{
- openrisc_cgen_init_opcode_table (cd);
- openrisc_cgen_init_ibld_table (cd);
- cd->parse_handlers = & openrisc_cgen_parse_handlers[0];
- cd->parse_operand = openrisc_cgen_parse_operand;
-}
-
-
-
-/* Regex construction routine.
-
- This translates an opcode syntax string into a regex string,
- by replacing any non-character syntax element (such as an
- opcode) with the pattern '.*'
-
- It then compiles the regex and stores it in the opcode, for
- later use by openrisc_cgen_assemble_insn
-
- Returns NULL for success, an error message for failure. */
-
-char *
-openrisc_cgen_build_insn_regex (CGEN_INSN *insn)
-{
- CGEN_OPCODE *opc = (CGEN_OPCODE *) CGEN_INSN_OPCODE (insn);
- const char *mnem = CGEN_INSN_MNEMONIC (insn);
- char rxbuf[CGEN_MAX_RX_ELEMENTS];
- char *rx = rxbuf;
- const CGEN_SYNTAX_CHAR_TYPE *syn;
- int reg_err;
-
- syn = CGEN_SYNTAX_STRING (CGEN_OPCODE_SYNTAX (opc));
-
- /* Mnemonics come first in the syntax string. */
- if (! CGEN_SYNTAX_MNEMONIC_P (* syn))
- return _("missing mnemonic in syntax string");
- ++syn;
-
- /* Generate a case sensitive regular expression that emulates case
- insensitive matching in the "C" locale. We cannot generate a case
- insensitive regular expression because in Turkish locales, 'i' and 'I'
- are not equal modulo case conversion. */
-
- /* Copy the literal mnemonic out of the insn. */
- for (; *mnem; mnem++)
- {
- char c = *mnem;
-
- if (ISALPHA (c))
- {
- *rx++ = '[';
- *rx++ = TOLOWER (c);
- *rx++ = TOUPPER (c);
- *rx++ = ']';
- }
- else
- *rx++ = c;
- }
-
- /* Copy any remaining literals from the syntax string into the rx. */
- for(; * syn != 0 && rx <= rxbuf + (CGEN_MAX_RX_ELEMENTS - 7 - 4); ++syn)
- {
- if (CGEN_SYNTAX_CHAR_P (* syn))
- {
- char c = CGEN_SYNTAX_CHAR (* syn);
-
- switch (c)
- {
- /* Escape any regex metacharacters in the syntax. */
- case '.': case '[': case '\\':
- case '*': case '^': case '$':
-
-#ifdef CGEN_ESCAPE_EXTENDED_REGEX
- case '?': case '{': case '}':
- case '(': case ')': case '*':
- case '|': case '+': case ']':
-#endif
- *rx++ = '\\';
- *rx++ = c;
- break;
-
- default:
- if (ISALPHA (c))
- {
- *rx++ = '[';
- *rx++ = TOLOWER (c);
- *rx++ = TOUPPER (c);
- *rx++ = ']';
- }
- else
- *rx++ = c;
- break;
- }
- }
- else
- {
- /* Replace non-syntax fields with globs. */
- *rx++ = '.';
- *rx++ = '*';
- }
- }
-
- /* Trailing whitespace ok. */
- * rx++ = '[';
- * rx++ = ' ';
- * rx++ = '\t';
- * rx++ = ']';
- * rx++ = '*';
-
- /* But anchor it after that. */
- * rx++ = '$';
- * rx = '\0';
-
- CGEN_INSN_RX (insn) = xmalloc (sizeof (regex_t));
- reg_err = regcomp ((regex_t *) CGEN_INSN_RX (insn), rxbuf, REG_NOSUB);
-
- if (reg_err == 0)
- return NULL;
- else
- {
- static char msg[80];
-
- regerror (reg_err, (regex_t *) CGEN_INSN_RX (insn), msg, 80);
- regfree ((regex_t *) CGEN_INSN_RX (insn));
- free (CGEN_INSN_RX (insn));
- (CGEN_INSN_RX (insn)) = NULL;
- return msg;
- }
-}
-
-
-/* Default insn parser.
-
- The syntax string is scanned and operands are parsed and stored in FIELDS.
- Relocs are queued as we go via other callbacks.
-
- ??? Note that this is currently an all-or-nothing parser. If we fail to
- parse the instruction, we return 0 and the caller will start over from
- the beginning. Backtracking will be necessary in parsing subexpressions,
- but that can be handled there. Not handling backtracking here may get
- expensive in the case of the m68k. Deal with later.
-
- Returns NULL for success, an error message for failure. */
-
-static const char *
-parse_insn_normal (CGEN_CPU_DESC cd,
- const CGEN_INSN *insn,
- const char **strp,
- CGEN_FIELDS *fields)
-{
- /* ??? Runtime added insns not handled yet. */
- const CGEN_SYNTAX *syntax = CGEN_INSN_SYNTAX (insn);
- const char *str = *strp;
- const char *errmsg;
- const char *p;
- const CGEN_SYNTAX_CHAR_TYPE * syn;
-#ifdef CGEN_MNEMONIC_OPERANDS
- /* FIXME: wip */
- int past_opcode_p;
-#endif
-
- /* For now we assume the mnemonic is first (there are no leading operands).
- We can parse it without needing to set up operand parsing.
- GAS's input scrubber will ensure mnemonics are lowercase, but we may
- not be called from GAS. */
- p = CGEN_INSN_MNEMONIC (insn);
- while (*p && TOLOWER (*p) == TOLOWER (*str))
- ++p, ++str;
-
- if (* p)
- return _("unrecognized instruction");
-
-#ifndef CGEN_MNEMONIC_OPERANDS
- if (* str && ! ISSPACE (* str))
- return _("unrecognized instruction");
-#endif
-
- CGEN_INIT_PARSE (cd);
- cgen_init_parse_operand (cd);
-#ifdef CGEN_MNEMONIC_OPERANDS
- past_opcode_p = 0;
-#endif
-
- /* We don't check for (*str != '\0') here because we want to parse
- any trailing fake arguments in the syntax string. */
- syn = CGEN_SYNTAX_STRING (syntax);
-
- /* Mnemonics come first for now, ensure valid string. */
- if (! CGEN_SYNTAX_MNEMONIC_P (* syn))
- abort ();
-
- ++syn;
-
- while (* syn != 0)
- {
- /* Non operand chars must match exactly. */
- if (CGEN_SYNTAX_CHAR_P (* syn))
- {
- /* FIXME: While we allow for non-GAS callers above, we assume the
- first char after the mnemonic part is a space. */
- /* FIXME: We also take inappropriate advantage of the fact that
- GAS's input scrubber will remove extraneous blanks. */
- if (TOLOWER (*str) == TOLOWER (CGEN_SYNTAX_CHAR (* syn)))
- {
-#ifdef CGEN_MNEMONIC_OPERANDS
- if (CGEN_SYNTAX_CHAR(* syn) == ' ')
- past_opcode_p = 1;
-#endif
- ++ syn;
- ++ str;
- }
- else if (*str)
- {
- /* Syntax char didn't match. Can't be this insn. */
- static char msg [80];
-
- /* xgettext:c-format */
- sprintf (msg, _("syntax error (expected char `%c', found `%c')"),
- CGEN_SYNTAX_CHAR(*syn), *str);
- return msg;
- }
- else
- {
- /* Ran out of input. */
- static char msg [80];
-
- /* xgettext:c-format */
- sprintf (msg, _("syntax error (expected char `%c', found end of instruction)"),
- CGEN_SYNTAX_CHAR(*syn));
- return msg;
- }
- continue;
- }
-
- /* We have an operand of some sort. */
- errmsg = cd->parse_operand (cd, CGEN_SYNTAX_FIELD (*syn),
- &str, fields);
- if (errmsg)
- return errmsg;
-
- /* Done with this operand, continue with next one. */
- ++ syn;
- }
-
- /* If we're at the end of the syntax string, we're done. */
- if (* syn == 0)
- {
- /* FIXME: For the moment we assume a valid `str' can only contain
- blanks now. IE: We needn't try again with a longer version of
- the insn and it is assumed that longer versions of insns appear
- before shorter ones (eg: lsr r2,r3,1 vs lsr r2,r3). */
- while (ISSPACE (* str))
- ++ str;
-
- if (* str != '\0')
- return _("junk at end of line"); /* FIXME: would like to include `str' */
-
- return NULL;
- }
-
- /* We couldn't parse it. */
- return _("unrecognized instruction");
-}
-
-/* Main entry point.
- This routine is called for each instruction to be assembled.
- STR points to the insn to be assembled.
- We assume all necessary tables have been initialized.
- The assembled instruction, less any fixups, is stored in BUF.
- Remember that if CGEN_INT_INSN_P then BUF is an int and thus the value
- still needs to be converted to target byte order, otherwise BUF is an array
- of bytes in target byte order.
- The result is a pointer to the insn's entry in the opcode table,
- or NULL if an error occured (an error message will have already been
- printed).
-
- Note that when processing (non-alias) macro-insns,
- this function recurses.
-
- ??? It's possible to make this cpu-independent.
- One would have to deal with a few minor things.
- At this point in time doing so would be more of a curiosity than useful
- [for example this file isn't _that_ big], but keeping the possibility in
- mind helps keep the design clean. */
-
-const CGEN_INSN *
-openrisc_cgen_assemble_insn (CGEN_CPU_DESC cd,
- const char *str,
- CGEN_FIELDS *fields,
- CGEN_INSN_BYTES_PTR buf,
- char **errmsg)
-{
- const char *start;
- CGEN_INSN_LIST *ilist;
- const char *parse_errmsg = NULL;
- const char *insert_errmsg = NULL;
- int recognized_mnemonic = 0;
-
- /* Skip leading white space. */
- while (ISSPACE (* str))
- ++ str;
-
- /* The instructions are stored in hashed lists.
- Get the first in the list. */
- ilist = CGEN_ASM_LOOKUP_INSN (cd, str);
-
- /* Keep looking until we find a match. */
- start = str;
- for ( ; ilist != NULL ; ilist = CGEN_ASM_NEXT_INSN (ilist))
- {
- const CGEN_INSN *insn = ilist->insn;
- recognized_mnemonic = 1;
-
-#ifdef CGEN_VALIDATE_INSN_SUPPORTED
- /* Not usually needed as unsupported opcodes
- shouldn't be in the hash lists. */
- /* Is this insn supported by the selected cpu? */
- if (! openrisc_cgen_insn_supported (cd, insn))
- continue;
-#endif
- /* If the RELAXED attribute is set, this is an insn that shouldn't be
- chosen immediately. Instead, it is used during assembler/linker
- relaxation if possible. */
- if (CGEN_INSN_ATTR_VALUE (insn, CGEN_INSN_RELAXED) != 0)
- continue;
-
- str = start;
-
- /* Skip this insn if str doesn't look right lexically. */
- if (CGEN_INSN_RX (insn) != NULL &&
- regexec ((regex_t *) CGEN_INSN_RX (insn), str, 0, NULL, 0) == REG_NOMATCH)
- continue;
-
- /* Allow parse/insert handlers to obtain length of insn. */
- CGEN_FIELDS_BITSIZE (fields) = CGEN_INSN_BITSIZE (insn);
-
- parse_errmsg = CGEN_PARSE_FN (cd, insn) (cd, insn, & str, fields);
- if (parse_errmsg != NULL)
- continue;
-
- /* ??? 0 is passed for `pc'. */
- insert_errmsg = CGEN_INSERT_FN (cd, insn) (cd, insn, fields, buf,
- (bfd_vma) 0);
- if (insert_errmsg != NULL)
- continue;
-
- /* It is up to the caller to actually output the insn and any
- queued relocs. */
- return insn;
- }
-
- {
- static char errbuf[150];
-#ifdef CGEN_VERBOSE_ASSEMBLER_ERRORS
- const char *tmp_errmsg;
-
- /* If requesting verbose error messages, use insert_errmsg.
- Failing that, use parse_errmsg. */
- tmp_errmsg = (insert_errmsg ? insert_errmsg :
- parse_errmsg ? parse_errmsg :
- recognized_mnemonic ?
- _("unrecognized form of instruction") :
- _("unrecognized instruction"));
-
- if (strlen (start) > 50)
- /* xgettext:c-format */
- sprintf (errbuf, "%s `%.50s...'", tmp_errmsg, start);
- else
- /* xgettext:c-format */
- sprintf (errbuf, "%s `%.50s'", tmp_errmsg, start);
-#else
- if (strlen (start) > 50)
- /* xgettext:c-format */
- sprintf (errbuf, _("bad instruction `%.50s...'"), start);
- else
- /* xgettext:c-format */
- sprintf (errbuf, _("bad instruction `%.50s'"), start);
-#endif
-
- *errmsg = errbuf;
- return NULL;
- }
-}
-
-#if 0 /* This calls back to GAS which we can't do without care. */
-
-/* Record each member of OPVALS in the assembler's symbol table.
- This lets GAS parse registers for us.
- ??? Interesting idea but not currently used. */
-
-/* Record each member of OPVALS in the assembler's symbol table.
- FIXME: Not currently used. */
-
-void
-openrisc_cgen_asm_hash_keywords (CGEN_CPU_DESC cd, CGEN_KEYWORD *opvals)
-{
- CGEN_KEYWORD_SEARCH search = cgen_keyword_search_init (opvals, NULL);
- const CGEN_KEYWORD_ENTRY * ke;
-
- while ((ke = cgen_keyword_search_next (& search)) != NULL)
- {
-#if 0 /* Unnecessary, should be done in the search routine. */
- if (! openrisc_cgen_opval_supported (ke))
- continue;
-#endif
- cgen_asm_record_register (cd, ke->name, ke->value);
- }
-}
-
-#endif /* 0 */
diff --unified -N -r ../binutils-2.16.1/opcodes/openrisc-desc.c binutils-2.16.1/opcodes/openrisc-desc.c
--- ../binutils-2.16.1/opcodes/openrisc-desc.c 2005-02-22 01:33:20.000000000 +0100
+++ binutils-2.16.1/opcodes/openrisc-desc.c 1970-01-01 01:00:00.000000000 +0100
@@ -1,1064 +0,0 @@
-/* CPU data for openrisc.
-
-THIS FILE IS MACHINE GENERATED WITH CGEN.
-
-Copyright 1996-2005 Free Software Foundation, Inc.
-
-This file is part of the GNU Binutils and/or GDB, the GNU debugger.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along
-with this program; if not, write to the Free Software Foundation, Inc.,
-59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-*/
-
-#include "sysdep.h"
-#include <stdio.h>
-#include <stdarg.h>
-#include "ansidecl.h"
-#include "bfd.h"
-#include "symcat.h"
-#include "openrisc-desc.h"
-#include "openrisc-opc.h"
-#include "opintl.h"
-#include "libiberty.h"
-#include "xregex.h"
-
-/* Attributes. */
-
-static const CGEN_ATTR_ENTRY bool_attr[] =
-{
- { "#f", 0 },
- { "#t", 1 },
- { 0, 0 }
-};
-
-static const CGEN_ATTR_ENTRY MACH_attr[] ATTRIBUTE_UNUSED =
-{
- { "base", MACH_BASE },
- { "openrisc", MACH_OPENRISC },
- { "or1300", MACH_OR1300 },
- { "max", MACH_MAX },
- { 0, 0 }
-};
-
-static const CGEN_ATTR_ENTRY ISA_attr[] ATTRIBUTE_UNUSED =
-{
- { "or32", ISA_OR32 },
- { "max", ISA_MAX },
- { 0, 0 }
-};
-
-static const CGEN_ATTR_ENTRY HAS_CACHE_attr[] ATTRIBUTE_UNUSED =
-{
- { "DATA_CACHE", HAS_CACHE_DATA_CACHE },
- { "INSN_CACHE", HAS_CACHE_INSN_CACHE },
- { 0, 0 }
-};
-
-const CGEN_ATTR_TABLE openrisc_cgen_ifield_attr_table[] =
-{
- { "MACH", & MACH_attr[0], & MACH_attr[0] },
- { "VIRTUAL", &bool_attr[0], &bool_attr[0] },
- { "PCREL-ADDR", &bool_attr[0], &bool_attr[0] },
- { "ABS-ADDR", &bool_attr[0], &bool_attr[0] },
- { "RESERVED", &bool_attr[0], &bool_attr[0] },
- { "SIGN-OPT", &bool_attr[0], &bool_attr[0] },
- { "SIGNED", &bool_attr[0], &bool_attr[0] },
- { 0, 0, 0 }
-};
-
-const CGEN_ATTR_TABLE openrisc_cgen_hardware_attr_table[] =
-{
- { "MACH", & MACH_attr[0], & MACH_attr[0] },
- { "VIRTUAL", &bool_attr[0], &bool_attr[0] },
- { "CACHE-ADDR", &bool_attr[0], &bool_attr[0] },
- { "PC", &bool_attr[0], &bool_attr[0] },
- { "PROFILE", &bool_attr[0], &bool_attr[0] },
- { 0, 0, 0 }
-};
-
-const CGEN_ATTR_TABLE openrisc_cgen_operand_attr_table[] =
-{
- { "MACH", & MACH_attr[0], & MACH_attr[0] },
- { "VIRTUAL", &bool_attr[0], &bool_attr[0] },
- { "PCREL-ADDR", &bool_attr[0], &bool_attr[0] },
- { "ABS-ADDR", &bool_attr[0], &bool_attr[0] },
- { "SIGN-OPT", &bool_attr[0], &bool_attr[0] },
- { "SIGNED", &bool_attr[0], &bool_attr[0] },
- { "NEGATIVE", &bool_attr[0], &bool_attr[0] },
- { "RELAX", &bool_attr[0], &bool_attr[0] },
- { "SEM-ONLY", &bool_attr[0], &bool_attr[0] },
- { 0, 0, 0 }
-};
-
-const CGEN_ATTR_TABLE openrisc_cgen_insn_attr_table[] =
-{
- { "MACH", & MACH_attr[0], & MACH_attr[0] },
- { "ALIAS", &bool_attr[0], &bool_attr[0] },
- { "VIRTUAL", &bool_attr[0], &bool_attr[0] },
- { "UNCOND-CTI", &bool_attr[0], &bool_attr[0] },
- { "COND-CTI", &bool_attr[0], &bool_attr[0] },
- { "SKIP-CTI", &bool_attr[0], &bool_attr[0] },
- { "DELAY-SLOT", &bool_attr[0], &bool_attr[0] },
- { "RELAXABLE", &bool_attr[0], &bool_attr[0] },
- { "RELAXED", &bool_attr[0], &bool_attr[0] },
- { "NO-DIS", &bool_attr[0], &bool_attr[0] },
- { "PBB", &bool_attr[0], &bool_attr[0] },
- { "NOT-IN-DELAY-SLOT", &bool_attr[0], &bool_attr[0] },
- { 0, 0, 0 }
-};
-
-/* Instruction set variants. */
-
-static const CGEN_ISA openrisc_cgen_isa_table[] = {
- { "or32", 32, 32, 32, 32 },
- { 0, 0, 0, 0, 0 }
-};
-
-/* Machine variants. */
-
-static const CGEN_MACH openrisc_cgen_mach_table[] = {
- { "openrisc", "openrisc", MACH_OPENRISC, 0 },
- { "or1300", "openrisc:1300", MACH_OR1300, 0 },
- { 0, 0, 0, 0 }
-};
-
-static CGEN_KEYWORD_ENTRY openrisc_cgen_opval_h_gr_entries[] =
-{
- { "r0", 0, {0, {0}}, 0, 0 },
- { "r1", 1, {0, {0}}, 0, 0 },
- { "r2", 2, {0, {0}}, 0, 0 },
- { "r3", 3, {0, {0}}, 0, 0 },
- { "r4", 4, {0, {0}}, 0, 0 },
- { "r5", 5, {0, {0}}, 0, 0 },
- { "r6", 6, {0, {0}}, 0, 0 },
- { "r7", 7, {0, {0}}, 0, 0 },
- { "r8", 8, {0, {0}}, 0, 0 },
- { "r9", 9, {0, {0}}, 0, 0 },
- { "r10", 10, {0, {0}}, 0, 0 },
- { "r11", 11, {0, {0}}, 0, 0 },
- { "r12", 12, {0, {0}}, 0, 0 },
- { "r13", 13, {0, {0}}, 0, 0 },
- { "r14", 14, {0, {0}}, 0, 0 },
- { "r15", 15, {0, {0}}, 0, 0 },
- { "r16", 16, {0, {0}}, 0, 0 },
- { "r17", 17, {0, {0}}, 0, 0 },
- { "r18", 18, {0, {0}}, 0, 0 },
- { "r19", 19, {0, {0}}, 0, 0 },
- { "r20", 20, {0, {0}}, 0, 0 },
- { "r21", 21, {0, {0}}, 0, 0 },
- { "r22", 22, {0, {0}}, 0, 0 },
- { "r23", 23, {0, {0}}, 0, 0 },
- { "r24", 24, {0, {0}}, 0, 0 },
- { "r25", 25, {0, {0}}, 0, 0 },
- { "r26", 26, {0, {0}}, 0, 0 },
- { "r27", 27, {0, {0}}, 0, 0 },
- { "r28", 28, {0, {0}}, 0, 0 },
- { "r29", 29, {0, {0}}, 0, 0 },
- { "r30", 30, {0, {0}}, 0, 0 },
- { "r31", 31, {0, {0}}, 0, 0 },
- { "lr", 11, {0, {0}}, 0, 0 },
- { "sp", 1, {0, {0}}, 0, 0 },
- { "fp", 2, {0, {0}}, 0, 0 }
-};
-
-CGEN_KEYWORD openrisc_cgen_opval_h_gr =
-{
- & openrisc_cgen_opval_h_gr_entries[0],
- 35,
- 0, 0, 0, 0, ""
-};
-
-
-/* The hardware table. */
-
-#if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
-#define A(a) (1 << CGEN_HW_##a)
-#else
-#define A(a) (1 << CGEN_HW_/**/a)
-#endif
-
-const CGEN_HW_ENTRY openrisc_cgen_hw_table[] =
-{
- { "h-memory", HW_H_MEMORY, CGEN_ASM_NONE, 0, { 0, { (1<<MACH_BASE) } } },
- { "h-sint", HW_H_SINT, CGEN_ASM_NONE, 0, { 0, { (1<<MACH_BASE) } } },
- { "h-uint", HW_H_UINT, CGEN_ASM_NONE, 0, { 0, { (1<<MACH_BASE) } } },
- { "h-addr", HW_H_ADDR, CGEN_ASM_NONE, 0, { 0, { (1<<MACH_BASE) } } },
- { "h-iaddr", HW_H_IADDR, CGEN_ASM_NONE, 0, { 0, { (1<<MACH_BASE) } } },
- { "h-pc", HW_H_PC, CGEN_ASM_NONE, 0, { 0|A(PROFILE)|A(PC), { (1<<MACH_BASE) } } },
- { "h-gr", HW_H_GR, CGEN_ASM_KEYWORD, (PTR) & openrisc_cgen_opval_h_gr, { 0|A(PROFILE), { (1<<MACH_BASE) } } },
- { "h-sr", HW_H_SR, CGEN_ASM_NONE, 0, { 0, { (1<<MACH_BASE) } } },
- { "h-hi16", HW_H_HI16, CGEN_ASM_NONE, 0, { 0, { (1<<MACH_BASE) } } },
- { "h-lo16", HW_H_LO16, CGEN_ASM_NONE, 0, { 0, { (1<<MACH_BASE) } } },
- { "h-cbit", HW_H_CBIT, CGEN_ASM_NONE, 0, { 0, { (1<<MACH_BASE) } } },
- { "h-delay-insn", HW_H_DELAY_INSN, CGEN_ASM_NONE, 0, { 0, { (1<<MACH_BASE) } } },
- { 0, 0, CGEN_ASM_NONE, 0, {0, {0}} }
-};
-
-#undef A
-
-
-/* The instruction field table. */
-
-#if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
-#define A(a) (1 << CGEN_IFLD_##a)
-#else
-#define A(a) (1 << CGEN_IFLD_/**/a)
-#endif
-
-const CGEN_IFLD openrisc_cgen_ifld_table[] =
-{
- { OPENRISC_F_NIL, "f-nil", 0, 0, 0, 0, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_ANYOF, "f-anyof", 0, 0, 0, 0, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_CLASS, "f-class", 0, 32, 31, 2, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_SUB, "f-sub", 0, 32, 29, 4, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_R1, "f-r1", 0, 32, 25, 5, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_R2, "f-r2", 0, 32, 20, 5, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_R3, "f-r3", 0, 32, 15, 5, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_SIMM16, "f-simm16", 0, 32, 15, 16, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_UIMM16, "f-uimm16", 0, 32, 15, 16, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_UIMM5, "f-uimm5", 0, 32, 4, 5, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_HI16, "f-hi16", 0, 32, 15, 16, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_LO16, "f-lo16", 0, 32, 15, 16, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_OP1, "f-op1", 0, 32, 31, 2, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_OP2, "f-op2", 0, 32, 29, 4, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_OP3, "f-op3", 0, 32, 25, 2, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_OP4, "f-op4", 0, 32, 23, 3, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_OP5, "f-op5", 0, 32, 25, 5, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_OP6, "f-op6", 0, 32, 7, 3, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_OP7, "f-op7", 0, 32, 3, 4, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_I16_1, "f-i16-1", 0, 32, 10, 11, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_I16_2, "f-i16-2", 0, 32, 25, 5, { 0, { (1<<MACH_BASE) } } },
- { OPENRISC_F_DISP26, "f-disp26", 0, 32, 25, 26, { 0|A(PCREL_ADDR), { (1<<MACH_BASE) } } },
- { OPENRISC_F_ABS26, "f-abs26", 0, 32, 25, 26, { 0|A(ABS_ADDR), { (1<<MACH_BASE) } } },
- { OPENRISC_F_I16NC, "f-i16nc", 0, 0, 0, 0,{ 0|A(SIGN_OPT)|A(VIRTUAL), { (1<<MACH_BASE) } } },
- { OPENRISC_F_F_15_8, "f-f-15-8", 0, 32, 15, 8, { 0|A(RESERVED), { (1<<MACH_BASE) } } },
- { OPENRISC_F_F_10_3, "f-f-10-3", 0, 32, 10, 3, { 0|A(RESERVED), { (1<<MACH_BASE) } } },
- { OPENRISC_F_F_4_1, "f-f-4-1", 0, 32, 4, 1, { 0|A(RESERVED), { (1<<MACH_BASE) } } },
- { OPENRISC_F_F_7_3, "f-f-7-3", 0, 32, 7, 3, { 0|A(RESERVED), { (1<<MACH_BASE) } } },
- { OPENRISC_F_F_10_7, "f-f-10-7", 0, 32, 10, 7, { 0|A(RESERVED), { (1<<MACH_BASE) } } },
- { OPENRISC_F_F_10_11, "f-f-10-11", 0, 32, 10, 11, { 0|A(RESERVED), { (1<<MACH_BASE) } } },
- { 0, 0, 0, 0, 0, 0, {0, {0}} }
-};
-
-#undef A
-
-
-
-/* multi ifield declarations */
-
-const CGEN_MAYBE_MULTI_IFLD OPENRISC_F_I16NC_MULTI_IFIELD [];
-
-
-/* multi ifield definitions */
-
-const CGEN_MAYBE_MULTI_IFLD OPENRISC_F_I16NC_MULTI_IFIELD [] =
-{
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_I16_1] } },
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_I16_2] } },
- { 0, { (const PTR) 0 } }
-};
-
-/* The operand table. */
-
-#if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
-#define A(a) (1 << CGEN_OPERAND_##a)
-#else
-#define A(a) (1 << CGEN_OPERAND_/**/a)
-#endif
-#if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
-#define OPERAND(op) OPENRISC_OPERAND_##op
-#else
-#define OPERAND(op) OPENRISC_OPERAND_/**/op
-#endif
-
-const CGEN_OPERAND openrisc_cgen_operand_table[] =
-{
-/* pc: program counter */
- { "pc", OPENRISC_OPERAND_PC, HW_H_PC, 0, 0,
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_NIL] } },
- { 0|A(SEM_ONLY), { (1<<MACH_BASE) } } },
-/* sr: special register */
- { "sr", OPENRISC_OPERAND_SR, HW_H_SR, 0, 0,
- { 0, { (const PTR) 0 } },
- { 0|A(SEM_ONLY), { (1<<MACH_BASE) } } },
-/* cbit: condition bit */
- { "cbit", OPENRISC_OPERAND_CBIT, HW_H_CBIT, 0, 0,
- { 0, { (const PTR) 0 } },
- { 0|A(SEM_ONLY), { (1<<MACH_BASE) } } },
-/* simm-16: 16 bit signed immediate */
- { "simm-16", OPENRISC_OPERAND_SIMM_16, HW_H_SINT, 15, 16,
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_SIMM16] } },
- { 0, { (1<<MACH_BASE) } } },
-/* uimm-16: 16 bit unsigned immediate */
- { "uimm-16", OPENRISC_OPERAND_UIMM_16, HW_H_UINT, 15, 16,
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_UIMM16] } },
- { 0, { (1<<MACH_BASE) } } },
-/* disp-26: pc-rel 26 bit */
- { "disp-26", OPENRISC_OPERAND_DISP_26, HW_H_IADDR, 25, 26,
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_DISP26] } },
- { 0|A(PCREL_ADDR), { (1<<MACH_BASE) } } },
-/* abs-26: abs 26 bit */
- { "abs-26", OPENRISC_OPERAND_ABS_26, HW_H_IADDR, 25, 26,
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_ABS26] } },
- { 0|A(ABS_ADDR), { (1<<MACH_BASE) } } },
-/* uimm-5: imm5 */
- { "uimm-5", OPENRISC_OPERAND_UIMM_5, HW_H_UINT, 4, 5,
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_UIMM5] } },
- { 0, { (1<<MACH_BASE) } } },
-/* rD: destination register */
- { "rD", OPENRISC_OPERAND_RD, HW_H_GR, 25, 5,
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_R1] } },
- { 0, { (1<<MACH_BASE) } } },
-/* rA: source register A */
- { "rA", OPENRISC_OPERAND_RA, HW_H_GR, 20, 5,
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_R2] } },
- { 0, { (1<<MACH_BASE) } } },
-/* rB: source register B */
- { "rB", OPENRISC_OPERAND_RB, HW_H_GR, 15, 5,
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_R3] } },
- { 0, { (1<<MACH_BASE) } } },
-/* op-f-23: f-op23 */
- { "op-f-23", OPENRISC_OPERAND_OP_F_23, HW_H_UINT, 23, 3,
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_OP4] } },
- { 0, { (1<<MACH_BASE) } } },
-/* op-f-3: f-op3 */
- { "op-f-3", OPENRISC_OPERAND_OP_F_3, HW_H_UINT, 25, 5,
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_OP5] } },
- { 0, { (1<<MACH_BASE) } } },
-/* hi16: high 16 bit immediate, sign optional */
- { "hi16", OPENRISC_OPERAND_HI16, HW_H_HI16, 15, 16,
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_SIMM16] } },
- { 0|A(SIGN_OPT), { (1<<MACH_BASE) } } },
-/* lo16: low 16 bit immediate, sign optional */
- { "lo16", OPENRISC_OPERAND_LO16, HW_H_LO16, 15, 16,
- { 0, { (const PTR) &openrisc_cgen_ifld_table[OPENRISC_F_LO16] } },
- { 0|A(SIGN_OPT), { (1<<MACH_BASE) } } },
-/* ui16nc: 16 bit immediate, sign optional */
- { "ui16nc", OPENRISC_OPERAND_UI16NC, HW_H_LO16, 10, 16,
- { 2, { (const PTR) &OPENRISC_F_I16NC_MULTI_IFIELD[0] } },
- { 0|A(SIGN_OPT)|A(VIRTUAL), { (1<<MACH_BASE) } } },
-/* sentinel */
- { 0, 0, 0, 0, 0,
- { 0, { (const PTR) 0 } },
- { 0, { 0 } } }
-};
-
-#undef A
-
-
-/* The instruction table. */
-
-#define OP(field) CGEN_SYNTAX_MAKE_FIELD (OPERAND (field))
-#if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
-#define A(a) (1 << CGEN_INSN_##a)
-#else
-#define A(a) (1 << CGEN_INSN_/**/a)
-#endif
-
-static const CGEN_IBASE openrisc_cgen_insn_table[MAX_INSNS] =
-{
- /* Special null first entry.
- A `num' value of zero is thus invalid.
- Also, the special `invalid' insn resides here. */
- { 0, 0, 0, 0, {0, {0}} },
-/* l.j ${abs-26} */
- {
- OPENRISC_INSN_L_J, "l-j", "l.j", 32,
- { 0|A(NOT_IN_DELAY_SLOT)|A(UNCOND_CTI)|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.jal ${abs-26} */
- {
- OPENRISC_INSN_L_JAL, "l-jal", "l.jal", 32,
- { 0|A(NOT_IN_DELAY_SLOT)|A(UNCOND_CTI)|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.jr $rA */
- {
- OPENRISC_INSN_L_JR, "l-jr", "l.jr", 32,
- { 0|A(NOT_IN_DELAY_SLOT)|A(UNCOND_CTI)|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.jalr $rA */
- {
- OPENRISC_INSN_L_JALR, "l-jalr", "l.jalr", 32,
- { 0|A(NOT_IN_DELAY_SLOT)|A(UNCOND_CTI)|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.bal ${disp-26} */
- {
- OPENRISC_INSN_L_BAL, "l-bal", "l.bal", 32,
- { 0|A(NOT_IN_DELAY_SLOT)|A(UNCOND_CTI)|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.bnf ${disp-26} */
- {
- OPENRISC_INSN_L_BNF, "l-bnf", "l.bnf", 32,
- { 0|A(NOT_IN_DELAY_SLOT)|A(COND_CTI)|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.bf ${disp-26} */
- {
- OPENRISC_INSN_L_BF, "l-bf", "l.bf", 32,
- { 0|A(NOT_IN_DELAY_SLOT)|A(COND_CTI)|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.brk ${uimm-16} */
- {
- OPENRISC_INSN_L_BRK, "l-brk", "l.brk", 32,
- { 0|A(NOT_IN_DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.rfe $rA */
- {
- OPENRISC_INSN_L_RFE, "l-rfe", "l.rfe", 32,
- { 0|A(NOT_IN_DELAY_SLOT)|A(UNCOND_CTI)|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sys ${uimm-16} */
- {
- OPENRISC_INSN_L_SYS, "l-sys", "l.sys", 32,
- { 0|A(NOT_IN_DELAY_SLOT)|A(UNCOND_CTI)|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.nop */
- {
- OPENRISC_INSN_L_NOP, "l-nop", "l.nop", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.movhi $rD,$hi16 */
- {
- OPENRISC_INSN_L_MOVHI, "l-movhi", "l.movhi", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.mfsr $rD,$rA */
- {
- OPENRISC_INSN_L_MFSR, "l-mfsr", "l.mfsr", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.mtsr $rA,$rB */
- {
- OPENRISC_INSN_L_MTSR, "l-mtsr", "l.mtsr", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.lw $rD,${simm-16}($rA) */
- {
- OPENRISC_INSN_L_LW, "l-lw", "l.lw", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.lbz $rD,${simm-16}($rA) */
- {
- OPENRISC_INSN_L_LBZ, "l-lbz", "l.lbz", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.lbs $rD,${simm-16}($rA) */
- {
- OPENRISC_INSN_L_LBS, "l-lbs", "l.lbs", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.lhz $rD,${simm-16}($rA) */
- {
- OPENRISC_INSN_L_LHZ, "l-lhz", "l.lhz", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.lhs $rD,${simm-16}($rA) */
- {
- OPENRISC_INSN_L_LHS, "l-lhs", "l.lhs", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sw ${ui16nc}($rA),$rB */
- {
- OPENRISC_INSN_L_SW, "l-sw", "l.sw", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sb ${ui16nc}($rA),$rB */
- {
- OPENRISC_INSN_L_SB, "l-sb", "l.sb", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sh ${ui16nc}($rA),$rB */
- {
- OPENRISC_INSN_L_SH, "l-sh", "l.sh", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sll $rD,$rA,$rB */
- {
- OPENRISC_INSN_L_SLL, "l-sll", "l.sll", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.slli $rD,$rA,${uimm-5} */
- {
- OPENRISC_INSN_L_SLLI, "l-slli", "l.slli", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.srl $rD,$rA,$rB */
- {
- OPENRISC_INSN_L_SRL, "l-srl", "l.srl", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.srli $rD,$rA,${uimm-5} */
- {
- OPENRISC_INSN_L_SRLI, "l-srli", "l.srli", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.sra $rD,$rA,$rB */
- {
- OPENRISC_INSN_L_SRA, "l-sra", "l.sra", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.srai $rD,$rA,${uimm-5} */
- {
- OPENRISC_INSN_L_SRAI, "l-srai", "l.srai", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.ror $rD,$rA,$rB */
- {
- OPENRISC_INSN_L_ROR, "l-ror", "l.ror", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.rori $rD,$rA,${uimm-5} */
- {
- OPENRISC_INSN_L_RORI, "l-rori", "l.rori", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.add $rD,$rA,$rB */
- {
- OPENRISC_INSN_L_ADD, "l-add", "l.add", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.addi $rD,$rA,$lo16 */
- {
- OPENRISC_INSN_L_ADDI, "l-addi", "l.addi", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.sub $rD,$rA,$rB */
- {
- OPENRISC_INSN_L_SUB, "l-sub", "l.sub", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.subi $rD,$rA,$lo16 */
- {
- OPENRISC_INSN_L_SUBI, "l-subi", "l.subi", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.and $rD,$rA,$rB */
- {
- OPENRISC_INSN_L_AND, "l-and", "l.and", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.andi $rD,$rA,$lo16 */
- {
- OPENRISC_INSN_L_ANDI, "l-andi", "l.andi", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.or $rD,$rA,$rB */
- {
- OPENRISC_INSN_L_OR, "l-or", "l.or", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.ori $rD,$rA,$lo16 */
- {
- OPENRISC_INSN_L_ORI, "l-ori", "l.ori", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.xor $rD,$rA,$rB */
- {
- OPENRISC_INSN_L_XOR, "l-xor", "l.xor", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.xori $rD,$rA,$lo16 */
- {
- OPENRISC_INSN_L_XORI, "l-xori", "l.xori", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.mul $rD,$rA,$rB */
- {
- OPENRISC_INSN_L_MUL, "l-mul", "l.mul", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.muli $rD,$rA,$lo16 */
- {
- OPENRISC_INSN_L_MULI, "l-muli", "l.muli", 32,
- { 0, { (1<<MACH_BASE) } }
- },
-/* l.div $rD,$rA,$rB */
- {
- OPENRISC_INSN_L_DIV, "l-div", "l.div", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.divu $rD,$rA,$rB */
- {
- OPENRISC_INSN_L_DIVU, "l-divu", "l.divu", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfgts $rA,$rB */
- {
- OPENRISC_INSN_L_SFGTS, "l-sfgts", "l.sfgts", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfgtu $rA,$rB */
- {
- OPENRISC_INSN_L_SFGTU, "l-sfgtu", "l.sfgtu", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfges $rA,$rB */
- {
- OPENRISC_INSN_L_SFGES, "l-sfges", "l.sfges", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfgeu $rA,$rB */
- {
- OPENRISC_INSN_L_SFGEU, "l-sfgeu", "l.sfgeu", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sflts $rA,$rB */
- {
- OPENRISC_INSN_L_SFLTS, "l-sflts", "l.sflts", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfltu $rA,$rB */
- {
- OPENRISC_INSN_L_SFLTU, "l-sfltu", "l.sfltu", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfles $rA,$rB */
- {
- OPENRISC_INSN_L_SFLES, "l-sfles", "l.sfles", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfleu $rA,$rB */
- {
- OPENRISC_INSN_L_SFLEU, "l-sfleu", "l.sfleu", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfgtsi $rA,${simm-16} */
- {
- OPENRISC_INSN_L_SFGTSI, "l-sfgtsi", "l.sfgtsi", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfgtui $rA,${uimm-16} */
- {
- OPENRISC_INSN_L_SFGTUI, "l-sfgtui", "l.sfgtui", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfgesi $rA,${simm-16} */
- {
- OPENRISC_INSN_L_SFGESI, "l-sfgesi", "l.sfgesi", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfgeui $rA,${uimm-16} */
- {
- OPENRISC_INSN_L_SFGEUI, "l-sfgeui", "l.sfgeui", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfltsi $rA,${simm-16} */
- {
- OPENRISC_INSN_L_SFLTSI, "l-sfltsi", "l.sfltsi", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfltui $rA,${uimm-16} */
- {
- OPENRISC_INSN_L_SFLTUI, "l-sfltui", "l.sfltui", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sflesi $rA,${simm-16} */
- {
- OPENRISC_INSN_L_SFLESI, "l-sflesi", "l.sflesi", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfleui $rA,${uimm-16} */
- {
- OPENRISC_INSN_L_SFLEUI, "l-sfleui", "l.sfleui", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfeq $rA,$rB */
- {
- OPENRISC_INSN_L_SFEQ, "l-sfeq", "l.sfeq", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfeqi $rA,${simm-16} */
- {
- OPENRISC_INSN_L_SFEQI, "l-sfeqi", "l.sfeqi", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfne $rA,$rB */
- {
- OPENRISC_INSN_L_SFNE, "l-sfne", "l.sfne", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-/* l.sfnei $rA,${simm-16} */
- {
- OPENRISC_INSN_L_SFNEI, "l-sfnei", "l.sfnei", 32,
- { 0|A(DELAY_SLOT), { (1<<MACH_BASE) } }
- },
-};
-
-#undef OP
-#undef A
-
-/* Initialize anything needed to be done once, before any cpu_open call. */
-static void init_tables PARAMS ((void));
-
-static void
-init_tables ()
-{
-}
-
-static const CGEN_MACH * lookup_mach_via_bfd_name
- PARAMS ((const CGEN_MACH *, const char *));
-static void build_hw_table PARAMS ((CGEN_CPU_TABLE *));
-static void build_ifield_table PARAMS ((CGEN_CPU_TABLE *));
-static void build_operand_table PARAMS ((CGEN_CPU_TABLE *));
-static void build_insn_table PARAMS ((CGEN_CPU_TABLE *));
-static void openrisc_cgen_rebuild_tables PARAMS ((CGEN_CPU_TABLE *));
-
-/* Subroutine of openrisc_cgen_cpu_open to look up a mach via its bfd name. */
-
-static const CGEN_MACH *
-lookup_mach_via_bfd_name (table, name)
- const CGEN_MACH *table;
- const char *name;
-{
- while (table->name)
- {
- if (strcmp (name, table->bfd_name) == 0)
- return table;
- ++table;
- }
- abort ();
-}
-
-/* Subroutine of openrisc_cgen_cpu_open to build the hardware table. */
-
-static void
-build_hw_table (cd)
- CGEN_CPU_TABLE *cd;
-{
- int i;
- int machs = cd->machs;
- const CGEN_HW_ENTRY *init = & openrisc_cgen_hw_table[0];
- /* MAX_HW is only an upper bound on the number of selected entries.
- However each entry is indexed by it's enum so there can be holes in
- the table. */
- const CGEN_HW_ENTRY **selected =
- (const CGEN_HW_ENTRY **) xmalloc (MAX_HW * sizeof (CGEN_HW_ENTRY *));
-
- cd->hw_table.init_entries = init;
- cd->hw_table.entry_size = sizeof (CGEN_HW_ENTRY);
- memset (selected, 0, MAX_HW * sizeof (CGEN_HW_ENTRY *));
- /* ??? For now we just use machs to determine which ones we want. */
- for (i = 0; init[i].name != NULL; ++i)
- if (CGEN_HW_ATTR_VALUE (&init[i], CGEN_HW_MACH)
- & machs)
- selected[init[i].type] = &init[i];
- cd->hw_table.entries = selected;
- cd->hw_table.num_entries = MAX_HW;
-}
-
-/* Subroutine of openrisc_cgen_cpu_open to build the hardware table. */
-
-static void
-build_ifield_table (cd)
- CGEN_CPU_TABLE *cd;
-{
- cd->ifld_table = & openrisc_cgen_ifld_table[0];
-}
-
-/* Subroutine of openrisc_cgen_cpu_open to build the hardware table. */
-
-static void
-build_operand_table (cd)
- CGEN_CPU_TABLE *cd;
-{
- int i;
- int machs = cd->machs;
- const CGEN_OPERAND *init = & openrisc_cgen_operand_table[0];
- /* MAX_OPERANDS is only an upper bound on the number of selected entries.
- However each entry is indexed by it's enum so there can be holes in
- the table. */
- const CGEN_OPERAND **selected =
- (const CGEN_OPERAND **) xmalloc (MAX_OPERANDS * sizeof (CGEN_OPERAND *));
-
- cd->operand_table.init_entries = init;
- cd->operand_table.entry_size = sizeof (CGEN_OPERAND);
- memset (selected, 0, MAX_OPERANDS * sizeof (CGEN_OPERAND *));
- /* ??? For now we just use mach to determine which ones we want. */
- for (i = 0; init[i].name != NULL; ++i)
- if (CGEN_OPERAND_ATTR_VALUE (&init[i], CGEN_OPERAND_MACH)
- & machs)
- selected[init[i].type] = &init[i];
- cd->operand_table.entries = selected;
- cd->operand_table.num_entries = MAX_OPERANDS;
-}
-
-/* Subroutine of openrisc_cgen_cpu_open to build the hardware table.
- ??? This could leave out insns not supported by the specified mach/isa,
- but that would cause errors like "foo only supported by bar" to become
- "unknown insn", so for now we include all insns and require the app to
- do the checking later.
- ??? On the other hand, parsing of such insns may require their hardware or
- operand elements to be in the table [which they mightn't be]. */
-
-static void
-build_insn_table (cd)
- CGEN_CPU_TABLE *cd;
-{
- int i;
- const CGEN_IBASE *ib = & openrisc_cgen_insn_table[0];
- CGEN_INSN *insns = (CGEN_INSN *) xmalloc (MAX_INSNS * sizeof (CGEN_INSN));
-
- memset (insns, 0, MAX_INSNS * sizeof (CGEN_INSN));
- for (i = 0; i < MAX_INSNS; ++i)
- insns[i].base = &ib[i];
- cd->insn_table.init_entries = insns;
- cd->insn_table.entry_size = sizeof (CGEN_IBASE);
- cd->insn_table.num_init_entries = MAX_INSNS;
-}
-
-/* Subroutine of openrisc_cgen_cpu_open to rebuild the tables. */
-
-static void
-openrisc_cgen_rebuild_tables (cd)
- CGEN_CPU_TABLE *cd;
-{
- int i;
- unsigned int isas = cd->isas;
- unsigned int machs = cd->machs;
-
- cd->int_insn_p = CGEN_INT_INSN_P;
-
- /* Data derived from the isa spec. */
-#define UNSET (CGEN_SIZE_UNKNOWN + 1)
- cd->default_insn_bitsize = UNSET;
- cd->base_insn_bitsize = UNSET;
- cd->min_insn_bitsize = 65535; /* some ridiculously big number */
- cd->max_insn_bitsize = 0;
- for (i = 0; i < MAX_ISAS; ++i)
- if (((1 << i) & isas) != 0)
- {
- const CGEN_ISA *isa = & openrisc_cgen_isa_table[i];
-
- /* Default insn sizes of all selected isas must be
- equal or we set the result to 0, meaning "unknown". */
- if (cd->default_insn_bitsize == UNSET)
- cd->default_insn_bitsize = isa->default_insn_bitsize;
- else if (isa->default_insn_bitsize == cd->default_insn_bitsize)
- ; /* this is ok */
- else
- cd->default_insn_bitsize = CGEN_SIZE_UNKNOWN;
-
- /* Base insn sizes of all selected isas must be equal
- or we set the result to 0, meaning "unknown". */
- if (cd->base_insn_bitsize == UNSET)
- cd->base_insn_bitsize = isa->base_insn_bitsize;
- else if (isa->base_insn_bitsize == cd->base_insn_bitsize)
- ; /* this is ok */
- else
- cd->base_insn_bitsize = CGEN_SIZE_UNKNOWN;
-
- /* Set min,max insn sizes. */
- if (isa->min_insn_bitsize < cd->min_insn_bitsize)
- cd->min_insn_bitsize = isa->min_insn_bitsize;
- if (isa->max_insn_bitsize > cd->max_insn_bitsize)
- cd->max_insn_bitsize = isa->max_insn_bitsize;
- }
-
- /* Data derived from the mach spec. */
- for (i = 0; i < MAX_MACHS; ++i)
- if (((1 << i) & machs) != 0)
- {
- const CGEN_MACH *mach = & openrisc_cgen_mach_table[i];
-
- if (mach->insn_chunk_bitsize != 0)
- {
- if (cd->insn_chunk_bitsize != 0 && cd->insn_chunk_bitsize != mach->insn_chunk_bitsize)
- {
- fprintf (stderr, "openrisc_cgen_rebuild_tables: conflicting insn-chunk-bitsize values: `%d' vs. `%d'\n",
- cd->insn_chunk_bitsize, mach->insn_chunk_bitsize);
- abort ();
- }
-
- cd->insn_chunk_bitsize = mach->insn_chunk_bitsize;
- }
- }
-
- /* Determine which hw elements are used by MACH. */
- build_hw_table (cd);
-
- /* Build the ifield table. */
- build_ifield_table (cd);
-
- /* Determine which operands are used by MACH/ISA. */
- build_operand_table (cd);
-
- /* Build the instruction table. */
- build_insn_table (cd);
-}
-
-/* Initialize a cpu table and return a descriptor.
- It's much like opening a file, and must be the first function called.
- The arguments are a set of (type/value) pairs, terminated with
- CGEN_CPU_OPEN_END.
-
- Currently supported values:
- CGEN_CPU_OPEN_ISAS: bitmap of values in enum isa_attr
- CGEN_CPU_OPEN_MACHS: bitmap of values in enum mach_attr
- CGEN_CPU_OPEN_BFDMACH: specify 1 mach using bfd name
- CGEN_CPU_OPEN_ENDIAN: specify endian choice
- CGEN_CPU_OPEN_END: terminates arguments
-
- ??? Simultaneous multiple isas might not make sense, but it's not (yet)
- precluded.
-
- ??? We only support ISO C stdargs here, not K&R.
- Laziness, plus experiment to see if anything requires K&R - eventually
- K&R will no longer be supported - e.g. GDB is currently trying this. */
-
-CGEN_CPU_DESC
-openrisc_cgen_cpu_open (enum cgen_cpu_open_arg arg_type, ...)
-{
- CGEN_CPU_TABLE *cd = (CGEN_CPU_TABLE *) xmalloc (sizeof (CGEN_CPU_TABLE));
- static int init_p;
- unsigned int isas = 0; /* 0 = "unspecified" */
- unsigned int machs = 0; /* 0 = "unspecified" */
- enum cgen_endian endian = CGEN_ENDIAN_UNKNOWN;
- va_list ap;
-
- if (! init_p)
- {
- init_tables ();
- init_p = 1;
- }
-
- memset (cd, 0, sizeof (*cd));
-
- va_start (ap, arg_type);
- while (arg_type != CGEN_CPU_OPEN_END)
- {
- switch (arg_type)
- {
- case CGEN_CPU_OPEN_ISAS :
- isas = va_arg (ap, unsigned int);
- break;
- case CGEN_CPU_OPEN_MACHS :
- machs = va_arg (ap, unsigned int);
- break;
- case CGEN_CPU_OPEN_BFDMACH :
- {
- const char *name = va_arg (ap, const char *);
- const CGEN_MACH *mach =
- lookup_mach_via_bfd_name (openrisc_cgen_mach_table, name);
-
- machs |= 1 << mach->num;
- break;
- }
- case CGEN_CPU_OPEN_ENDIAN :
- endian = va_arg (ap, enum cgen_endian);
- break;
- default :
- fprintf (stderr, "openrisc_cgen_cpu_open: unsupported argument `%d'\n",
- arg_type);
- abort (); /* ??? return NULL? */
- }
- arg_type = va_arg (ap, enum cgen_cpu_open_arg);
- }
- va_end (ap);
-
- /* mach unspecified means "all" */
- if (machs == 0)
- machs = (1 << MAX_MACHS) - 1;
- /* base mach is always selected */
- machs |= 1;
- /* isa unspecified means "all" */
- if (isas == 0)
- isas = (1 << MAX_ISAS) - 1;
- if (endian == CGEN_ENDIAN_UNKNOWN)
- {
- /* ??? If target has only one, could have a default. */
- fprintf (stderr, "openrisc_cgen_cpu_open: no endianness specified\n");
- abort ();
- }
-
- cd->isas = isas;
- cd->machs = machs;
- cd->endian = endian;
- /* FIXME: for the sparc case we can determine insn-endianness statically.
- The worry here is where both data and insn endian can be independently
- chosen, in which case this function will need another argument.
- Actually, will want to allow for more arguments in the future anyway. */
- cd->insn_endian = endian;
-
- /* Table (re)builder. */
- cd->rebuild_tables = openrisc_cgen_rebuild_tables;
- openrisc_cgen_rebuild_tables (cd);
-
- /* Default to not allowing signed overflow. */
- cd->signed_overflow_ok_p = 0;
-
- return (CGEN_CPU_DESC) cd;
-}
-
-/* Cover fn to openrisc_cgen_cpu_open to handle the simple case of 1 isa, 1 mach.
- MACH_NAME is the bfd name of the mach. */
-
-CGEN_CPU_DESC
-openrisc_cgen_cpu_open_1 (mach_name, endian)
- const char *mach_name;
- enum cgen_endian endian;
-{
- return openrisc_cgen_cpu_open (CGEN_CPU_OPEN_BFDMACH, mach_name,
- CGEN_CPU_OPEN_ENDIAN, endian,
- CGEN_CPU_OPEN_END);
-}
-
-/* Close a cpu table.
- ??? This can live in a machine independent file, but there's currently
- no place to put this file (there's no libcgen). libopcodes is the wrong
- place as some simulator ports use this but they don't use libopcodes. */
-
-void
-openrisc_cgen_cpu_close (cd)
- CGEN_CPU_DESC cd;
-{
- unsigned int i;
- const CGEN_INSN *insns;
-
- if (cd->macro_insn_table.init_entries)
- {
- insns = cd->macro_insn_table.init_entries;
- for (i = 0; i < cd->macro_insn_table.num_init_entries; ++i, ++insns)
- {
- if (CGEN_INSN_RX ((insns)))
- regfree (CGEN_INSN_RX (insns));
- }
- }
-
- if (cd->insn_table.init_entries)
- {
- insns = cd->insn_table.init_entries;
- for (i = 0; i < cd->insn_table.num_init_entries; ++i, ++insns)
- {
- if (CGEN_INSN_RX (insns))
- regfree (CGEN_INSN_RX (insns));
- }
- }
-
-
-
- if (cd->macro_insn_table.init_entries)
- free ((CGEN_INSN *) cd->macro_insn_table.init_entries);
-
- if (cd->insn_table.init_entries)
- free ((CGEN_INSN *) cd->insn_table.init_entries);
-
- if (cd->hw_table.entries)
- free ((CGEN_HW_ENTRY *) cd->hw_table.entries);
-
- if (cd->operand_table.entries)
- free ((CGEN_HW_ENTRY *) cd->operand_table.entries);
-
- free (cd);
-}
-
diff --unified -N -r ../binutils-2.16.1/opcodes/openrisc-desc.h binutils-2.16.1/opcodes/openrisc-desc.h
--- ../binutils-2.16.1/opcodes/openrisc-desc.h 2005-02-22 01:33:20.000000000 +0100
+++ binutils-2.16.1/opcodes/openrisc-desc.h 1970-01-01 01:00:00.000000000 +0100
@@ -1,251 +0,0 @@
-/* CPU data header for openrisc.
-
-THIS FILE IS MACHINE GENERATED WITH CGEN.
-
-Copyright 1996-2005 Free Software Foundation, Inc.
-
-This file is part of the GNU Binutils and/or GDB, the GNU debugger.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along
-with this program; if not, write to the Free Software Foundation, Inc.,
-59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-*/
-
-#ifndef OPENRISC_CPU_H
-#define OPENRISC_CPU_H
-
-#define CGEN_ARCH openrisc
-
-/* Given symbol S, return openrisc_cgen_<S>. */
-#if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
-#define CGEN_SYM(s) openrisc##_cgen_##s
-#else
-#define CGEN_SYM(s) openrisc/**/_cgen_/**/s
-#endif
-
-
-/* Selected cpu families. */
-#define HAVE_CPU_OPENRISCBF
-
-#define CGEN_INSN_LSB0_P 1
-
-/* Minimum size of any insn (in bytes). */
-#define CGEN_MIN_INSN_SIZE 4
-
-/* Maximum size of any insn (in bytes). */
-#define CGEN_MAX_INSN_SIZE 4
-
-#define CGEN_INT_INSN_P 1
-
-/* Maximum number of syntax elements in an instruction. */
-#define CGEN_ACTUAL_MAX_SYNTAX_ELEMENTS 14
-
-/* CGEN_MNEMONIC_OPERANDS is defined if mnemonics have operands.
- e.g. In "b,a foo" the ",a" is an operand. If mnemonics have operands
- we can't hash on everything up to the space. */
-#define CGEN_MNEMONIC_OPERANDS
-
-/* Maximum number of fields in an instruction. */
-#define CGEN_ACTUAL_MAX_IFMT_OPERANDS 9
-
-/* Enums. */
-
-/* Enum declaration for exception vectors. */
-typedef enum e_exception {
- E_RESET, E_BUSERR, E_DPF, E_IPF
- , E_EXTINT, E_ALIGN, E_ILLEGAL, E_PEINT
- , E_DTLBMISS, E_ITLBMISS, E_RRANGE, E_SYSCALL
- , E_BREAK, E_RESERVED
-} E_EXCEPTION;
-
-/* Enum declaration for FIXME. */
-typedef enum insn_class {
- OP1_0, OP1_1, OP1_2, OP1_3
-} INSN_CLASS;
-
-/* Enum declaration for FIXME. */
-typedef enum insn_sub {
- OP2_0, OP2_1, OP2_2, OP2_3
- , OP2_4, OP2_5, OP2_6, OP2_7
- , OP2_8, OP2_9, OP2_10, OP2_11
- , OP2_12, OP2_13, OP2_14, OP2_15
-} INSN_SUB;
-
-/* Enum declaration for FIXME. */
-typedef enum insn_op3 {
- OP3_0, OP3_1, OP3_2, OP3_3
-} INSN_OP3;
-
-/* Enum declaration for FIXME. */
-typedef enum insn_op4 {
- OP4_0, OP4_1, OP4_2, OP4_3
- , OP4_4, OP4_5, OP4_6, OP4_7
-} INSN_OP4;
-
-/* Enum declaration for FIXME. */
-typedef enum insn_op5 {
- OP5_0, OP5_1, OP5_2, OP5_3
- , OP5_4, OP5_5, OP5_6, OP5_7
- , OP5_8, OP5_9, OP5_10, OP5_11
- , OP5_12, OP5_13, OP5_14, OP5_15
- , OP5_16, OP5_17, OP5_18, OP5_19
- , OP5_20, OP5_21, OP5_22, OP5_23
- , OP5_24, OP5_25, OP5_26, OP5_27
- , OP5_28, OP5_29, OP5_30, OP5_31
-} INSN_OP5;
-
-/* Enum declaration for FIXME. */
-typedef enum insn_op6 {
- OP6_0, OP6_1, OP6_2, OP6_3
- , OP6_4, OP6_5, OP6_6, OP6_7
-} INSN_OP6;
-
-/* Enum declaration for FIXME. */
-typedef enum insn_op7 {
- OP7_0, OP7_1, OP7_2, OP7_3
- , OP7_4, OP7_5, OP7_6, OP7_7
- , OP7_8, OP7_9, OP7_10, OP7_11
- , OP7_12, OP7_13, OP7_14, OP7_15
-} INSN_OP7;
-
-/* Attributes. */
-
-/* Enum declaration for machine type selection. */
-typedef enum mach_attr {
- MACH_BASE, MACH_OPENRISC, MACH_OR1300, MACH_MAX
-} MACH_ATTR;
-
-/* Enum declaration for instruction set selection. */
-typedef enum isa_attr {
- ISA_OR32, ISA_MAX
-} ISA_ATTR;
-
-/* Enum declaration for if this model has caches. */
-typedef enum has_cache_attr {
- HAS_CACHE_DATA_CACHE, HAS_CACHE_INSN_CACHE
-} HAS_CACHE_ATTR;
-
-/* Number of architecture variants. */
-#define MAX_ISAS 1
-#define MAX_MACHS ((int) MACH_MAX)
-
-/* Ifield support. */
-
-/* Ifield attribute indices. */
-
-/* Enum declaration for cgen_ifld attrs. */
-typedef enum cgen_ifld_attr {
- CGEN_IFLD_VIRTUAL, CGEN_IFLD_PCREL_ADDR, CGEN_IFLD_ABS_ADDR, CGEN_IFLD_RESERVED
- , CGEN_IFLD_SIGN_OPT, CGEN_IFLD_SIGNED, CGEN_IFLD_END_BOOLS, CGEN_IFLD_START_NBOOLS = 31
- , CGEN_IFLD_MACH, CGEN_IFLD_END_NBOOLS
-} CGEN_IFLD_ATTR;
-
-/* Number of non-boolean elements in cgen_ifld_attr. */
-#define CGEN_IFLD_NBOOL_ATTRS (CGEN_IFLD_END_NBOOLS - CGEN_IFLD_START_NBOOLS - 1)
-
-/* Enum declaration for openrisc ifield types. */
-typedef enum ifield_type {
- OPENRISC_F_NIL, OPENRISC_F_ANYOF, OPENRISC_F_CLASS, OPENRISC_F_SUB
- , OPENRISC_F_R1, OPENRISC_F_R2, OPENRISC_F_R3, OPENRISC_F_SIMM16
- , OPENRISC_F_UIMM16, OPENRISC_F_UIMM5, OPENRISC_F_HI16, OPENRISC_F_LO16
- , OPENRISC_F_OP1, OPENRISC_F_OP2, OPENRISC_F_OP3, OPENRISC_F_OP4
- , OPENRISC_F_OP5, OPENRISC_F_OP6, OPENRISC_F_OP7, OPENRISC_F_I16_1
- , OPENRISC_F_I16_2, OPENRISC_F_DISP26, OPENRISC_F_ABS26, OPENRISC_F_I16NC
- , OPENRISC_F_F_15_8, OPENRISC_F_F_10_3, OPENRISC_F_F_4_1, OPENRISC_F_F_7_3
- , OPENRISC_F_F_10_7, OPENRISC_F_F_10_11, OPENRISC_F_MAX
-} IFIELD_TYPE;
-
-#define MAX_IFLD ((int) OPENRISC_F_MAX)
-
-/* Hardware attribute indices. */
-
-/* Enum declaration for cgen_hw attrs. */
-typedef enum cgen_hw_attr {
- CGEN_HW_VIRTUAL, CGEN_HW_CACHE_ADDR, CGEN_HW_PC, CGEN_HW_PROFILE
- , CGEN_HW_END_BOOLS, CGEN_HW_START_NBOOLS = 31, CGEN_HW_MACH, CGEN_HW_END_NBOOLS
-} CGEN_HW_ATTR;
-
-/* Number of non-boolean elements in cgen_hw_attr. */
-#define CGEN_HW_NBOOL_ATTRS (CGEN_HW_END_NBOOLS - CGEN_HW_START_NBOOLS - 1)
-
-/* Enum declaration for openrisc hardware types. */
-typedef enum cgen_hw_type {
- HW_H_MEMORY, HW_H_SINT, HW_H_UINT, HW_H_ADDR
- , HW_H_IADDR, HW_H_PC, HW_H_GR, HW_H_SR
- , HW_H_HI16, HW_H_LO16, HW_H_CBIT, HW_H_DELAY_INSN
- , HW_MAX
-} CGEN_HW_TYPE;
-
-#define MAX_HW ((int) HW_MAX)
-
-/* Operand attribute indices. */
-
-/* Enum declaration for cgen_operand attrs. */
-typedef enum cgen_operand_attr {
- CGEN_OPERAND_VIRTUAL, CGEN_OPERAND_PCREL_ADDR, CGEN_OPERAND_ABS_ADDR, CGEN_OPERAND_SIGN_OPT
- , CGEN_OPERAND_SIGNED, CGEN_OPERAND_NEGATIVE, CGEN_OPERAND_RELAX, CGEN_OPERAND_SEM_ONLY
- , CGEN_OPERAND_END_BOOLS, CGEN_OPERAND_START_NBOOLS = 31, CGEN_OPERAND_MACH, CGEN_OPERAND_END_NBOOLS
-} CGEN_OPERAND_ATTR;
-
-/* Number of non-boolean elements in cgen_operand_attr. */
-#define CGEN_OPERAND_NBOOL_ATTRS (CGEN_OPERAND_END_NBOOLS - CGEN_OPERAND_START_NBOOLS - 1)
-
-/* Enum declaration for openrisc operand types. */
-typedef enum cgen_operand_type {
- OPENRISC_OPERAND_PC, OPENRISC_OPERAND_SR, OPENRISC_OPERAND_CBIT, OPENRISC_OPERAND_SIMM_16
- , OPENRISC_OPERAND_UIMM_16, OPENRISC_OPERAND_DISP_26, OPENRISC_OPERAND_ABS_26, OPENRISC_OPERAND_UIMM_5
- , OPENRISC_OPERAND_RD, OPENRISC_OPERAND_RA, OPENRISC_OPERAND_RB, OPENRISC_OPERAND_OP_F_23
- , OPENRISC_OPERAND_OP_F_3, OPENRISC_OPERAND_HI16, OPENRISC_OPERAND_LO16, OPENRISC_OPERAND_UI16NC
- , OPENRISC_OPERAND_MAX
-} CGEN_OPERAND_TYPE;
-
-/* Number of operands types. */
-#define MAX_OPERANDS 16
-
-/* Maximum number of operands referenced by any insn. */
-#define MAX_OPERAND_INSTANCES 8
-
-/* Insn attribute indices. */
-
-/* Enum declaration for cgen_insn attrs. */
-typedef enum cgen_insn_attr {
- CGEN_INSN_ALIAS, CGEN_INSN_VIRTUAL, CGEN_INSN_UNCOND_CTI, CGEN_INSN_COND_CTI
- , CGEN_INSN_SKIP_CTI, CGEN_INSN_DELAY_SLOT, CGEN_INSN_RELAXABLE, CGEN_INSN_RELAXED
- , CGEN_INSN_NO_DIS, CGEN_INSN_PBB, CGEN_INSN_NOT_IN_DELAY_SLOT, CGEN_INSN_END_BOOLS
- , CGEN_INSN_START_NBOOLS = 31, CGEN_INSN_MACH, CGEN_INSN_END_NBOOLS
-} CGEN_INSN_ATTR;
-
-/* Number of non-boolean elements in cgen_insn_attr. */
-#define CGEN_INSN_NBOOL_ATTRS (CGEN_INSN_END_NBOOLS - CGEN_INSN_START_NBOOLS - 1)
-
-/* cgen.h uses things we just defined. */
-#include "opcode/cgen.h"
-
-extern const struct cgen_ifld openrisc_cgen_ifld_table[];
-
-/* Attributes. */
-extern const CGEN_ATTR_TABLE openrisc_cgen_hardware_attr_table[];
-extern const CGEN_ATTR_TABLE openrisc_cgen_ifield_attr_table[];
-extern const CGEN_ATTR_TABLE openrisc_cgen_operand_attr_table[];
-extern const CGEN_ATTR_TABLE openrisc_cgen_insn_attr_table[];
-
-/* Hardware decls. */
-
-extern CGEN_KEYWORD openrisc_cgen_opval_h_gr;
-
-extern const CGEN_HW_ENTRY openrisc_cgen_hw_table[];
-
-
-
-#endif /* OPENRISC_CPU_H */
diff --unified -N -r ../binutils-2.16.1/opcodes/openrisc-dis.c binutils-2.16.1/opcodes/openrisc-dis.c
--- ../binutils-2.16.1/opcodes/openrisc-dis.c 2005-02-23 17:04:39.000000000 +0100
+++ binutils-2.16.1/opcodes/openrisc-dis.c 1970-01-01 01:00:00.000000000 +0100
@@ -1,555 +0,0 @@
-/* Disassembler interface for targets using CGEN. -*- C -*-
- CGEN: Cpu tools GENerator
-
-THIS FILE IS MACHINE GENERATED WITH CGEN.
-- the resultant file is machine generated, cgen-dis.in isn't
-
-Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2005
-Free Software Foundation, Inc.
-
-This file is part of the GNU Binutils and GDB, the GNU debugger.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software Foundation, Inc.,
-59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-/* ??? Eventually more and more of this stuff can go to cpu-independent files.
- Keep that in mind. */
-
-#include "sysdep.h"
-#include <stdio.h>
-#include "ansidecl.h"
-#include "dis-asm.h"
-#include "bfd.h"
-#include "symcat.h"
-#include "libiberty.h"
-#include "openrisc-desc.h"
-#include "openrisc-opc.h"
-#include "opintl.h"
-
-/* Default text to print if an instruction isn't recognized. */
-#define UNKNOWN_INSN_MSG _("*unknown*")
-
-static void print_normal
- (CGEN_CPU_DESC, void *, long, unsigned int, bfd_vma, int);
-static void print_address
- (CGEN_CPU_DESC, void *, bfd_vma, unsigned int, bfd_vma, int) ATTRIBUTE_UNUSED;
-static void print_keyword
- (CGEN_CPU_DESC, void *, CGEN_KEYWORD *, long, unsigned int) ATTRIBUTE_UNUSED;
-static void print_insn_normal
- (CGEN_CPU_DESC, void *, const CGEN_INSN *, CGEN_FIELDS *, bfd_vma, int);
-static int print_insn
- (CGEN_CPU_DESC, bfd_vma, disassemble_info *, bfd_byte *, unsigned);
-static int default_print_insn
- (CGEN_CPU_DESC, bfd_vma, disassemble_info *) ATTRIBUTE_UNUSED;
-static int read_insn
- (CGEN_CPU_DESC, bfd_vma, disassemble_info *, bfd_byte *, int, CGEN_EXTRACT_INFO *,
- unsigned long *);
-
-/* -- disassembler routines inserted here */
-
-
-void openrisc_cgen_print_operand
- PARAMS ((CGEN_CPU_DESC, int, PTR, CGEN_FIELDS *,
- void const *, bfd_vma, int));
-
-/* Main entry point for printing operands.
- XINFO is a `void *' and not a `disassemble_info *' to not put a requirement
- of dis-asm.h on cgen.h.
-
- This function is basically just a big switch statement. Earlier versions
- used tables to look up the function to use, but
- - if the table contains both assembler and disassembler functions then
- the disassembler contains much of the assembler and vice-versa,
- - there's a lot of inlining possibilities as things grow,
- - using a switch statement avoids the function call overhead.
-
- This function could be moved into `print_insn_normal', but keeping it
- separate makes clear the interface between `print_insn_normal' and each of
- the handlers. */
-
-void
-openrisc_cgen_print_operand (cd, opindex, xinfo, fields, attrs, pc, length)
- CGEN_CPU_DESC cd;
- int opindex;
- PTR xinfo;
- CGEN_FIELDS *fields;
- void const *attrs ATTRIBUTE_UNUSED;
- bfd_vma pc;
- int length;
-{
- disassemble_info *info = (disassemble_info *) xinfo;
-
- switch (opindex)
- {
- case OPENRISC_OPERAND_ABS_26 :
- print_address (cd, info, fields->f_abs26, 0|(1<<CGEN_OPERAND_ABS_ADDR), pc, length);
- break;
- case OPENRISC_OPERAND_DISP_26 :
- print_address (cd, info, fields->f_disp26, 0|(1<<CGEN_OPERAND_PCREL_ADDR), pc, length);
- break;
- case OPENRISC_OPERAND_HI16 :
- print_normal (cd, info, fields->f_simm16, 0|(1<<CGEN_OPERAND_SIGNED)|(1<<CGEN_OPERAND_SIGN_OPT), pc, length);
- break;
- case OPENRISC_OPERAND_LO16 :
- print_normal (cd, info, fields->f_lo16, 0|(1<<CGEN_OPERAND_SIGNED)|(1<<CGEN_OPERAND_SIGN_OPT), pc, length);
- break;
- case OPENRISC_OPERAND_OP_F_23 :
- print_normal (cd, info, fields->f_op4, 0, pc, length);
- break;
- case OPENRISC_OPERAND_OP_F_3 :
- print_normal (cd, info, fields->f_op5, 0, pc, length);
- break;
- case OPENRISC_OPERAND_RA :
- print_keyword (cd, info, & openrisc_cgen_opval_h_gr, fields->f_r2, 0);
- break;
- case OPENRISC_OPERAND_RB :
- print_keyword (cd, info, & openrisc_cgen_opval_h_gr, fields->f_r3, 0);
- break;
- case OPENRISC_OPERAND_RD :
- print_keyword (cd, info, & openrisc_cgen_opval_h_gr, fields->f_r1, 0);
- break;
- case OPENRISC_OPERAND_SIMM_16 :
- print_normal (cd, info, fields->f_simm16, 0|(1<<CGEN_OPERAND_SIGNED), pc, length);
- break;
- case OPENRISC_OPERAND_UI16NC :
- print_normal (cd, info, fields->f_i16nc, 0|(1<<CGEN_OPERAND_SIGNED)|(1<<CGEN_OPERAND_SIGN_OPT)|(1<<CGEN_OPERAND_VIRTUAL), pc, length);
- break;
- case OPENRISC_OPERAND_UIMM_16 :
- print_normal (cd, info, fields->f_uimm16, 0, pc, length);
- break;
- case OPENRISC_OPERAND_UIMM_5 :
- print_normal (cd, info, fields->f_uimm5, 0, pc, length);
- break;
-
- default :
- /* xgettext:c-format */
- fprintf (stderr, _("Unrecognized field %d while printing insn.\n"),
- opindex);
- abort ();
- }
-}
-
-cgen_print_fn * const openrisc_cgen_print_handlers[] =
-{
- print_insn_normal,
-};
-
-
-void
-openrisc_cgen_init_dis (cd)
- CGEN_CPU_DESC cd;
-{
- openrisc_cgen_init_opcode_table (cd);
- openrisc_cgen_init_ibld_table (cd);
- cd->print_handlers = & openrisc_cgen_print_handlers[0];
- cd->print_operand = openrisc_cgen_print_operand;
-}
-
-
-/* Default print handler. */
-
-static void
-print_normal (CGEN_CPU_DESC cd ATTRIBUTE_UNUSED,
- void *dis_info,
- long value,
- unsigned int attrs,
- bfd_vma pc ATTRIBUTE_UNUSED,
- int length ATTRIBUTE_UNUSED)
-{
- disassemble_info *info = (disassemble_info *) dis_info;
-
-#ifdef CGEN_PRINT_NORMAL
- CGEN_PRINT_NORMAL (cd, info, value, attrs, pc, length);
-#endif
-
- /* Print the operand as directed by the attributes. */
- if (CGEN_BOOL_ATTR (attrs, CGEN_OPERAND_SEM_ONLY))
- ; /* nothing to do */
- else if (CGEN_BOOL_ATTR (attrs, CGEN_OPERAND_SIGNED))
- (*info->fprintf_func) (info->stream, "%ld", value);
- else
- (*info->fprintf_func) (info->stream, "0x%lx", value);
-}
-
-/* Default address handler. */
-
-static void
-print_address (CGEN_CPU_DESC cd ATTRIBUTE_UNUSED,
- void *dis_info,
- bfd_vma value,
- unsigned int attrs,
- bfd_vma pc ATTRIBUTE_UNUSED,
- int length ATTRIBUTE_UNUSED)
-{
- disassemble_info *info = (disassemble_info *) dis_info;
-
-#ifdef CGEN_PRINT_ADDRESS
- CGEN_PRINT_ADDRESS (cd, info, value, attrs, pc, length);
-#endif
-
- /* Print the operand as directed by the attributes. */
- if (CGEN_BOOL_ATTR (attrs, CGEN_OPERAND_SEM_ONLY))
- ; /* nothing to do */
- else if (CGEN_BOOL_ATTR (attrs, CGEN_OPERAND_PCREL_ADDR))
- (*info->print_address_func) (value, info);
- else if (CGEN_BOOL_ATTR (attrs, CGEN_OPERAND_ABS_ADDR))
- (*info->print_address_func) (value, info);
- else if (CGEN_BOOL_ATTR (attrs, CGEN_OPERAND_SIGNED))
- (*info->fprintf_func) (info->stream, "%ld", (long) value);
- else
- (*info->fprintf_func) (info->stream, "0x%lx", (long) value);
-}
-
-/* Keyword print handler. */
-
-static void
-print_keyword (CGEN_CPU_DESC cd ATTRIBUTE_UNUSED,
- void *dis_info,
- CGEN_KEYWORD *keyword_table,
- long value,
- unsigned int attrs ATTRIBUTE_UNUSED)
-{
- disassemble_info *info = (disassemble_info *) dis_info;
- const CGEN_KEYWORD_ENTRY *ke;
-
- ke = cgen_keyword_lookup_value (keyword_table, value);
- if (ke != NULL)
- (*info->fprintf_func) (info->stream, "%s", ke->name);
- else
- (*info->fprintf_func) (info->stream, "???");
-}
-
-/* Default insn printer.
-
- DIS_INFO is defined as `void *' so the disassembler needn't know anything
- about disassemble_info. */
-
-static void
-print_insn_normal (CGEN_CPU_DESC cd,
- void *dis_info,
- const CGEN_INSN *insn,
- CGEN_FIELDS *fields,
- bfd_vma pc,
- int length)
-{
- const CGEN_SYNTAX *syntax = CGEN_INSN_SYNTAX (insn);
- disassemble_info *info = (disassemble_info *) dis_info;
- const CGEN_SYNTAX_CHAR_TYPE *syn;
-
- CGEN_INIT_PRINT (cd);
-
- for (syn = CGEN_SYNTAX_STRING (syntax); *syn; ++syn)
- {
- if (CGEN_SYNTAX_MNEMONIC_P (*syn))
- {
- (*info->fprintf_func) (info->stream, "%s", CGEN_INSN_MNEMONIC (insn));
- continue;
- }
- if (CGEN_SYNTAX_CHAR_P (*syn))
- {
- (*info->fprintf_func) (info->stream, "%c", CGEN_SYNTAX_CHAR (*syn));
- continue;
- }
-
- /* We have an operand. */
- openrisc_cgen_print_operand (cd, CGEN_SYNTAX_FIELD (*syn), info,
- fields, CGEN_INSN_ATTRS (insn), pc, length);
- }
-}
-
-/* Subroutine of print_insn. Reads an insn into the given buffers and updates
- the extract info.
- Returns 0 if all is well, non-zero otherwise. */
-
-static int
-read_insn (CGEN_CPU_DESC cd ATTRIBUTE_UNUSED,
- bfd_vma pc,
- disassemble_info *info,
- bfd_byte *buf,
- int buflen,
- CGEN_EXTRACT_INFO *ex_info,
- unsigned long *insn_value)
-{
- int status = (*info->read_memory_func) (pc, buf, buflen, info);
- if (status != 0)
- {
- (*info->memory_error_func) (status, pc, info);
- return -1;
- }
-
- ex_info->dis_info = info;
- ex_info->valid = (1 << buflen) - 1;
- ex_info->insn_bytes = buf;
-
- *insn_value = bfd_get_bits (buf, buflen * 8, info->endian == BFD_ENDIAN_BIG);
- return 0;
-}
-
-/* Utility to print an insn.
- BUF is the base part of the insn, target byte order, BUFLEN bytes long.
- The result is the size of the insn in bytes or zero for an unknown insn
- or -1 if an error occurs fetching data (memory_error_func will have
- been called). */
-
-static int
-print_insn (CGEN_CPU_DESC cd,
- bfd_vma pc,
- disassemble_info *info,
- bfd_byte *buf,
- unsigned int buflen)
-{
- CGEN_INSN_INT insn_value;
- const CGEN_INSN_LIST *insn_list;
- CGEN_EXTRACT_INFO ex_info;
- int basesize;
-
- /* Extract base part of instruction, just in case CGEN_DIS_* uses it. */
- basesize = cd->base_insn_bitsize < buflen * 8 ?
- cd->base_insn_bitsize : buflen * 8;
- insn_value = cgen_get_insn_value (cd, buf, basesize);
-
-
- /* Fill in ex_info fields like read_insn would. Don't actually call
- read_insn, since the incoming buffer is already read (and possibly
- modified a la m32r). */
- ex_info.valid = (1 << buflen) - 1;
- ex_info.dis_info = info;
- ex_info.insn_bytes = buf;
-
- /* The instructions are stored in hash lists.
- Pick the first one and keep trying until we find the right one. */
-
- insn_list = CGEN_DIS_LOOKUP_INSN (cd, (char *) buf, insn_value);
- while (insn_list != NULL)
- {
- const CGEN_INSN *insn = insn_list->insn;
- CGEN_FIELDS fields;
- int length;
- unsigned long insn_value_cropped;
-
-#ifdef CGEN_VALIDATE_INSN_SUPPORTED
- /* Not needed as insn shouldn't be in hash lists if not supported. */
- /* Supported by this cpu? */
- if (! openrisc_cgen_insn_supported (cd, insn))
- {
- insn_list = CGEN_DIS_NEXT_INSN (insn_list);
- continue;
- }
-#endif
-
- /* Basic bit mask must be correct. */
- /* ??? May wish to allow target to defer this check until the extract
- handler. */
-
- /* Base size may exceed this instruction's size. Extract the
- relevant part from the buffer. */
- if ((unsigned) (CGEN_INSN_BITSIZE (insn) / 8) < buflen &&
- (unsigned) (CGEN_INSN_BITSIZE (insn) / 8) <= sizeof (unsigned long))
- insn_value_cropped = bfd_get_bits (buf, CGEN_INSN_BITSIZE (insn),
- info->endian == BFD_ENDIAN_BIG);
- else
- insn_value_cropped = insn_value;
-
- if ((insn_value_cropped & CGEN_INSN_BASE_MASK (insn))
- == CGEN_INSN_BASE_VALUE (insn))
- {
- /* Printing is handled in two passes. The first pass parses the
- machine insn and extracts the fields. The second pass prints
- them. */
-
- /* Make sure the entire insn is loaded into insn_value, if it
- can fit. */
- if (((unsigned) CGEN_INSN_BITSIZE (insn) > cd->base_insn_bitsize) &&
- (unsigned) (CGEN_INSN_BITSIZE (insn) / 8) <= sizeof (unsigned long))
- {
- unsigned long full_insn_value;
- int rc = read_insn (cd, pc, info, buf,
- CGEN_INSN_BITSIZE (insn) / 8,
- & ex_info, & full_insn_value);
- if (rc != 0)
- return rc;
- length = CGEN_EXTRACT_FN (cd, insn)
- (cd, insn, &ex_info, full_insn_value, &fields, pc);
- }
- else
- length = CGEN_EXTRACT_FN (cd, insn)
- (cd, insn, &ex_info, insn_value_cropped, &fields, pc);
-
- /* length < 0 -> error */
- if (length < 0)
- return length;
- if (length > 0)
- {
- CGEN_PRINT_FN (cd, insn) (cd, info, insn, &fields, pc, length);
- /* length is in bits, result is in bytes */
- return length / 8;
- }
- }
-
- insn_list = CGEN_DIS_NEXT_INSN (insn_list);
- }
-
- return 0;
-}
-
-/* Default value for CGEN_PRINT_INSN.
- The result is the size of the insn in bytes or zero for an unknown insn
- or -1 if an error occured fetching bytes. */
-
-#ifndef CGEN_PRINT_INSN
-#define CGEN_PRINT_INSN default_print_insn
-#endif
-
-static int
-default_print_insn (CGEN_CPU_DESC cd, bfd_vma pc, disassemble_info *info)
-{
- bfd_byte buf[CGEN_MAX_INSN_SIZE];
- int buflen;
- int status;
-
- /* Attempt to read the base part of the insn. */
- buflen = cd->base_insn_bitsize / 8;
- status = (*info->read_memory_func) (pc, buf, buflen, info);
-
- /* Try again with the minimum part, if min < base. */
- if (status != 0 && (cd->min_insn_bitsize < cd->base_insn_bitsize))
- {
- buflen = cd->min_insn_bitsize / 8;
- status = (*info->read_memory_func) (pc, buf, buflen, info);
- }
-
- if (status != 0)
- {
- (*info->memory_error_func) (status, pc, info);
- return -1;
- }
-
- return print_insn (cd, pc, info, buf, buflen);
-}
-
-/* Main entry point.
- Print one instruction from PC on INFO->STREAM.
- Return the size of the instruction (in bytes). */
-
-typedef struct cpu_desc_list {
- struct cpu_desc_list *next;
- int isa;
- int mach;
- int endian;
- CGEN_CPU_DESC cd;
-} cpu_desc_list;
-
-int
-print_insn_openrisc (bfd_vma pc, disassemble_info *info)
-{
- static cpu_desc_list *cd_list = 0;
- cpu_desc_list *cl = 0;
- static CGEN_CPU_DESC cd = 0;
- static int prev_isa;
- static int prev_mach;
- static int prev_endian;
- int length;
- int isa,mach;
- int endian = (info->endian == BFD_ENDIAN_BIG
- ? CGEN_ENDIAN_BIG
- : CGEN_ENDIAN_LITTLE);
- enum bfd_architecture arch;
-
- /* ??? gdb will set mach but leave the architecture as "unknown" */
-#ifndef CGEN_BFD_ARCH
-#define CGEN_BFD_ARCH bfd_arch_openrisc
-#endif
- arch = info->arch;
- if (arch == bfd_arch_unknown)
- arch = CGEN_BFD_ARCH;
-
- /* There's no standard way to compute the machine or isa number
- so we leave it to the target. */
-#ifdef CGEN_COMPUTE_MACH
- mach = CGEN_COMPUTE_MACH (info);
-#else
- mach = info->mach;
-#endif
-
-#ifdef CGEN_COMPUTE_ISA
- isa = CGEN_COMPUTE_ISA (info);
-#else
- isa = info->insn_sets;
-#endif
-
- /* If we've switched cpu's, try to find a handle we've used before */
- if (cd
- && (isa != prev_isa
- || mach != prev_mach
- || endian != prev_endian))
- {
- cd = 0;
- for (cl = cd_list; cl; cl = cl->next)
- {
- if (cl->isa == isa &&
- cl->mach == mach &&
- cl->endian == endian)
- {
- cd = cl->cd;
- break;
- }
- }
- }
-
- /* If we haven't initialized yet, initialize the opcode table. */
- if (! cd)
- {
- const bfd_arch_info_type *arch_type = bfd_lookup_arch (arch, mach);
- const char *mach_name;
-
- if (!arch_type)
- abort ();
- mach_name = arch_type->printable_name;
-
- prev_isa = isa;
- prev_mach = mach;
- prev_endian = endian;
- cd = openrisc_cgen_cpu_open (CGEN_CPU_OPEN_ISAS, prev_isa,
- CGEN_CPU_OPEN_BFDMACH, mach_name,
- CGEN_CPU_OPEN_ENDIAN, prev_endian,
- CGEN_CPU_OPEN_END);
- if (!cd)
- abort ();
-
- /* save this away for future reference */
- cl = xmalloc (sizeof (struct cpu_desc_list));
- cl->cd = cd;
- cl->isa = isa;
- cl->mach = mach;
- cl->endian = endian;
- cl->next = cd_list;
- cd_list = cl;
-
- openrisc_cgen_init_dis (cd);
- }
-
- /* We try to have as much common code as possible.
- But at this point some targets need to take over. */
- /* ??? Some targets may need a hook elsewhere. Try to avoid this,
- but if not possible try to move this hook elsewhere rather than
- have two hooks. */
- length = CGEN_PRINT_INSN (cd, pc, info);
- if (length > 0)
- return length;
- if (length < 0)
- return -1;
-
- (*info->fprintf_func) (info->stream, UNKNOWN_INSN_MSG);
- return cd->default_insn_bitsize / 8;
-}
diff --unified -N -r ../binutils-2.16.1/opcodes/openrisc-ibld.c binutils-2.16.1/opcodes/openrisc-ibld.c
--- ../binutils-2.16.1/opcodes/openrisc-ibld.c 2003-08-09 02:39:21.000000000 +0200
+++ binutils-2.16.1/opcodes/openrisc-ibld.c 1970-01-01 01:00:00.000000000 +0100
@@ -1,1025 +0,0 @@
-/* Instruction building/extraction support for openrisc. -*- C -*-
-
-THIS FILE IS MACHINE GENERATED WITH CGEN: Cpu tools GENerator.
-- the resultant file is machine generated, cgen-ibld.in isn't
-
-Copyright 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc.
-
-This file is part of the GNU Binutils and GDB, the GNU debugger.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software Foundation, Inc.,
-59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
-
-/* ??? Eventually more and more of this stuff can go to cpu-independent files.
- Keep that in mind. */
-
-#include "sysdep.h"
-#include <stdio.h>
-#include "ansidecl.h"
-#include "dis-asm.h"
-#include "bfd.h"
-#include "symcat.h"
-#include "openrisc-desc.h"
-#include "openrisc-opc.h"
-#include "opintl.h"
-#include "safe-ctype.h"
-
-#undef min
-#define min(a,b) ((a) < (b) ? (a) : (b))
-#undef max
-#define max(a,b) ((a) > (b) ? (a) : (b))
-
-/* Used by the ifield rtx function. */
-#define FLD(f) (fields->f)
-
-static const char * insert_normal
- (CGEN_CPU_DESC, long, unsigned int, unsigned int, unsigned int,
- unsigned int, unsigned int, unsigned int, CGEN_INSN_BYTES_PTR);
-static const char * insert_insn_normal
- (CGEN_CPU_DESC, const CGEN_INSN *,
- CGEN_FIELDS *, CGEN_INSN_BYTES_PTR, bfd_vma);
-static int extract_normal
- (CGEN_CPU_DESC, CGEN_EXTRACT_INFO *, CGEN_INSN_INT,
- unsigned int, unsigned int, unsigned int, unsigned int,
- unsigned int, unsigned int, bfd_vma, long *);
-static int extract_insn_normal
- (CGEN_CPU_DESC, const CGEN_INSN *, CGEN_EXTRACT_INFO *,
- CGEN_INSN_INT, CGEN_FIELDS *, bfd_vma);
-#if CGEN_INT_INSN_P
-static void put_insn_int_value
- (CGEN_CPU_DESC, CGEN_INSN_BYTES_PTR, int, int, CGEN_INSN_INT);
-#endif
-#if ! CGEN_INT_INSN_P
-static CGEN_INLINE void insert_1
- (CGEN_CPU_DESC, unsigned long, int, int, int, unsigned char *);
-static CGEN_INLINE int fill_cache
- (CGEN_CPU_DESC, CGEN_EXTRACT_INFO *, int, int, bfd_vma);
-static CGEN_INLINE long extract_1
- (CGEN_CPU_DESC, CGEN_EXTRACT_INFO *, int, int, int, unsigned char *, bfd_vma);
-#endif
-
-/* Operand insertion. */
-
-#if ! CGEN_INT_INSN_P
-
-/* Subroutine of insert_normal. */
-
-static CGEN_INLINE void
-insert_1 (CGEN_CPU_DESC cd,
- unsigned long value,
- int start,
- int length,
- int word_length,
- unsigned char *bufp)
-{
- unsigned long x,mask;
- int shift;
-
- x = cgen_get_insn_value (cd, bufp, word_length);
-
- /* Written this way to avoid undefined behaviour. */
- mask = (((1L << (length - 1)) - 1) << 1) | 1;
- if (CGEN_INSN_LSB0_P)
- shift = (start + 1) - length;
- else
- shift = (word_length - (start + length));
- x = (x & ~(mask << shift)) | ((value & mask) << shift);
-
- cgen_put_insn_value (cd, bufp, word_length, (bfd_vma) x);
-}
-
-#endif /* ! CGEN_INT_INSN_P */
-
-/* Default insertion routine.
-
- ATTRS is a mask of the boolean attributes.
- WORD_OFFSET is the offset in bits from the start of the insn of the value.
- WORD_LENGTH is the length of the word in bits in which the value resides.
- START is the starting bit number in the word, architecture origin.
- LENGTH is the length of VALUE in bits.
- TOTAL_LENGTH is the total length of the insn in bits.
-
- The result is an error message or NULL if success. */
-
-/* ??? This duplicates functionality with bfd's howto table and
- bfd_install_relocation. */
-/* ??? This doesn't handle bfd_vma's. Create another function when
- necessary. */
-
-static const char *
-insert_normal (CGEN_CPU_DESC cd,
- long value,
- unsigned int attrs,
- unsigned int word_offset,
- unsigned int start,
- unsigned int length,
- unsigned int word_length,
- unsigned int total_length,
- CGEN_INSN_BYTES_PTR buffer)
-{
- static char errbuf[100];
- /* Written this way to avoid undefined behaviour. */
- unsigned long mask = (((1L << (length - 1)) - 1) << 1) | 1;
-
- /* If LENGTH is zero, this operand doesn't contribute to the value. */
- if (length == 0)
- return NULL;
-
-#if 0
- if (CGEN_INT_INSN_P
- && word_offset != 0)
- abort ();
-#endif
-
- if (word_length > 32)
- abort ();
-
- /* For architectures with insns smaller than the base-insn-bitsize,
- word_length may be too big. */
- if (cd->min_insn_bitsize < cd->base_insn_bitsize)
- {
- if (word_offset == 0
- && word_length > total_length)
- word_length = total_length;
- }
-
- /* Ensure VALUE will fit. */
- if (CGEN_BOOL_ATTR (attrs, CGEN_IFLD_SIGN_OPT))
- {
- long minval = - (1L << (length - 1));
- unsigned long maxval = mask;
-
- if ((value > 0 && (unsigned long) value > maxval)
- || value < minval)
- {
- /* xgettext:c-format */
- sprintf (errbuf,
- _("operand out of range (%ld not between %ld and %lu)"),
- value, minval, maxval);
- return errbuf;
- }
- }
- else if (! CGEN_BOOL_ATTR (attrs, CGEN_IFLD_SIGNED))
- {
- unsigned long maxval = mask;
-
- if ((unsigned long) value > maxval)
- {
- /* xgettext:c-format */
- sprintf (errbuf,
- _("operand out of range (%lu not between 0 and %lu)"),
- value, maxval);
- return errbuf;
- }
- }
- else
- {
- if (! cgen_signed_overflow_ok_p (cd))
- {
- long minval = - (1L << (length - 1));
- long maxval = (1L << (length - 1)) - 1;
-
- if (value < minval || value > maxval)
- {
- sprintf
- /* xgettext:c-format */
- (errbuf, _("operand out of range (%ld not between %ld and %ld)"),
- value, minval, maxval);
- return errbuf;
- }
- }
- }
-
-#if CGEN_INT_INSN_P
-
- {
- int shift;
-
- if (CGEN_INSN_LSB0_P)
- shift = (word_offset + start + 1) - length;
- else
- shift = total_length - (word_offset + start + length);
- *buffer = (*buffer & ~(mask << shift)) | ((value & mask) << shift);
- }
-
-#else /* ! CGEN_INT_INSN_P */
-
- {
- unsigned char *bufp = (unsigned char *) buffer + word_offset / 8;
-
- insert_1 (cd, value, start, length, word_length, bufp);
- }
-
-#endif /* ! CGEN_INT_INSN_P */
-
- return NULL;
-}
-
-/* Default insn builder (insert handler).
- The instruction is recorded in CGEN_INT_INSN_P byte order (meaning
- that if CGEN_INSN_BYTES_PTR is an int * and thus, the value is
- recorded in host byte order, otherwise BUFFER is an array of bytes
- and the value is recorded in target byte order).
- The result is an error message or NULL if success. */
-
-static const char *
-insert_insn_normal (CGEN_CPU_DESC cd,
- const CGEN_INSN * insn,
- CGEN_FIELDS * fields,
- CGEN_INSN_BYTES_PTR buffer,
- bfd_vma pc)
-{
- const CGEN_SYNTAX *syntax = CGEN_INSN_SYNTAX (insn);
- unsigned long value;
- const CGEN_SYNTAX_CHAR_TYPE * syn;
-
- CGEN_INIT_INSERT (cd);
- value = CGEN_INSN_BASE_VALUE (insn);
-
- /* If we're recording insns as numbers (rather than a string of bytes),
- target byte order handling is deferred until later. */
-
-#if CGEN_INT_INSN_P
-
- put_insn_int_value (cd, buffer, cd->base_insn_bitsize,
- CGEN_FIELDS_BITSIZE (fields), value);
-
-#else
-
- cgen_put_insn_value (cd, buffer, min ((unsigned) cd->base_insn_bitsize,
- (unsigned) CGEN_FIELDS_BITSIZE (fields)),
- value);
-
-#endif /* ! CGEN_INT_INSN_P */
-
- /* ??? It would be better to scan the format's fields.
- Still need to be able to insert a value based on the operand though;
- e.g. storing a branch displacement that got resolved later.
- Needs more thought first. */
-
- for (syn = CGEN_SYNTAX_STRING (syntax); * syn; ++ syn)
- {
- const char *errmsg;
-
- if (CGEN_SYNTAX_CHAR_P (* syn))
- continue;
-
- errmsg = (* cd->insert_operand) (cd, CGEN_SYNTAX_FIELD (*syn),
- fields, buffer, pc);
- if (errmsg)
- return errmsg;
- }
-
- return NULL;
-}
-
-#if CGEN_INT_INSN_P
-/* Cover function to store an insn value into an integral insn. Must go here
- because it needs <prefix>-desc.h for CGEN_INT_INSN_P. */
-
-static void
-put_insn_int_value (CGEN_CPU_DESC cd ATTRIBUTE_UNUSED,
- CGEN_INSN_BYTES_PTR buf,
- int length,
- int insn_length,
- CGEN_INSN_INT value)
-{
- /* For architectures with insns smaller than the base-insn-bitsize,
- length may be too big. */
- if (length > insn_length)
- *buf = value;
- else
- {
- int shift = insn_length - length;
- /* Written this way to avoid undefined behaviour. */
- CGEN_INSN_INT mask = (((1L << (length - 1)) - 1) << 1) | 1;
- *buf = (*buf & ~(mask << shift)) | ((value & mask) << shift);
- }
-}
-#endif
-
-/* Operand extraction. */
-
-#if ! CGEN_INT_INSN_P
-
-/* Subroutine of extract_normal.
- Ensure sufficient bytes are cached in EX_INFO.
- OFFSET is the offset in bytes from the start of the insn of the value.
- BYTES is the length of the needed value.
- Returns 1 for success, 0 for failure. */
-
-static CGEN_INLINE int
-fill_cache (CGEN_CPU_DESC cd ATTRIBUTE_UNUSED,
- CGEN_EXTRACT_INFO *ex_info,
- int offset,
- int bytes,
- bfd_vma pc)
-{
- /* It's doubtful that the middle part has already been fetched so
- we don't optimize that case. kiss. */
- unsigned int mask;
- disassemble_info *info = (disassemble_info *) ex_info->dis_info;
-
- /* First do a quick check. */
- mask = (1 << bytes) - 1;
- if (((ex_info->valid >> offset) & mask) == mask)
- return 1;
-
- /* Search for the first byte we need to read. */
- for (mask = 1 << offset; bytes > 0; --bytes, ++offset, mask <<= 1)
- if (! (mask & ex_info->valid))
- break;
-
- if (bytes)
- {
- int status;
-
- pc += offset;
- status = (*info->read_memory_func)
- (pc, ex_info->insn_bytes + offset, bytes, info);
-
- if (status != 0)
- {
- (*info->memory_error_func) (status, pc, info);
- return 0;
- }
-
- ex_info->valid |= ((1 << bytes) - 1) << offset;
- }
-
- return 1;
-}
-
-/* Subroutine of extract_normal. */
-
-static CGEN_INLINE long
-extract_1 (CGEN_CPU_DESC cd,
- CGEN_EXTRACT_INFO *ex_info ATTRIBUTE_UNUSED,
- int start,
- int length,
- int word_length,
- unsigned char *bufp,
- bfd_vma pc ATTRIBUTE_UNUSED)
-{
- unsigned long x;
- int shift;
-#if 0
- int big_p = CGEN_CPU_INSN_ENDIAN (cd) == CGEN_ENDIAN_BIG;
-#endif
- x = cgen_get_insn_value (cd, bufp, word_length);
-
- if (CGEN_INSN_LSB0_P)
- shift = (start + 1) - length;
- else
- shift = (word_length - (start + length));
- return x >> shift;
-}
-
-#endif /* ! CGEN_INT_INSN_P */
-
-/* Default extraction routine.
-
- INSN_VALUE is the first base_insn_bitsize bits of the insn in host order,
- or sometimes less for cases like the m32r where the base insn size is 32
- but some insns are 16 bits.
- ATTRS is a mask of the boolean attributes. We only need `SIGNED',
- but for generality we take a bitmask of all of them.
- WORD_OFFSET is the offset in bits from the start of the insn of the value.
- WORD_LENGTH is the length of the word in bits in which the value resides.
- START is the starting bit number in the word, architecture origin.
- LENGTH is the length of VALUE in bits.
- TOTAL_LENGTH is the total length of the insn in bits.
-
- Returns 1 for success, 0 for failure. */
-
-/* ??? The return code isn't properly used. wip. */
-
-/* ??? This doesn't handle bfd_vma's. Create another function when
- necessary. */
-
-static int
-extract_normal (CGEN_CPU_DESC cd,
-#if ! CGEN_INT_INSN_P
- CGEN_EXTRACT_INFO *ex_info,
-#else
- CGEN_EXTRACT_INFO *ex_info ATTRIBUTE_UNUSED,
-#endif
- CGEN_INSN_INT insn_value,
- unsigned int attrs,
- unsigned int word_offset,
- unsigned int start,
- unsigned int length,
- unsigned int word_length,
- unsigned int total_length,
-#if ! CGEN_INT_INSN_P
- bfd_vma pc,
-#else
- bfd_vma pc ATTRIBUTE_UNUSED,
-#endif
- long *valuep)
-{
- long value, mask;
-
- /* If LENGTH is zero, this operand doesn't contribute to the value
- so give it a standard value of zero. */
- if (length == 0)
- {
- *valuep = 0;
- return 1;
- }
-
-#if 0
- if (CGEN_INT_INSN_P
- && word_offset != 0)
- abort ();
-#endif
-
- if (word_length > 32)
- abort ();
-
- /* For architectures with insns smaller than the insn-base-bitsize,
- word_length may be too big. */
- if (cd->min_insn_bitsize < cd->base_insn_bitsize)
- {
- if (word_offset == 0
- && word_length > total_length)
- word_length = total_length;
- }
-
- /* Does the value reside in INSN_VALUE, and at the right alignment? */
-
- if (CGEN_INT_INSN_P || (word_offset == 0 && word_length == total_length))
- {
- if (CGEN_INSN_LSB0_P)
- value = insn_value >> ((word_offset + start + 1) - length);
- else
- value = insn_value >> (total_length - ( word_offset + start + length));
- }
-
-#if ! CGEN_INT_INSN_P
-
- else
- {
- unsigned char *bufp = ex_info->insn_bytes + word_offset / 8;
-
- if (word_length > 32)
- abort ();
-
- if (fill_cache (cd, ex_info, word_offset / 8, word_length / 8, pc) == 0)
- return 0;
-
- value = extract_1 (cd, ex_info, start, length, word_length, bufp, pc);
- }
-
-#endif /* ! CGEN_INT_INSN_P */
-
- /* Written this way to avoid undefined behaviour. */
- mask = (((1L << (length - 1)) - 1) << 1) | 1;
-
- value &= mask;
- /* sign extend? */
- if (CGEN_BOOL_ATTR (attrs, CGEN_IFLD_SIGNED)
- && (value & (1L << (length - 1))))
- value |= ~mask;
-
- *valuep = value;
-
- return 1;
-}
-
-/* Default insn extractor.
-
- INSN_VALUE is the first base_insn_bitsize bits, translated to host order.
- The extracted fields are stored in FIELDS.
- EX_INFO is used to handle reading variable length insns.
- Return the length of the insn in bits, or 0 if no match,
- or -1 if an error occurs fetching data (memory_error_func will have
- been called). */
-
-static int
-extract_insn_normal (CGEN_CPU_DESC cd,
- const CGEN_INSN *insn,
- CGEN_EXTRACT_INFO *ex_info,
- CGEN_INSN_INT insn_value,
- CGEN_FIELDS *fields,
- bfd_vma pc)
-{
- const CGEN_SYNTAX *syntax = CGEN_INSN_SYNTAX (insn);
- const CGEN_SYNTAX_CHAR_TYPE *syn;
-
- CGEN_FIELDS_BITSIZE (fields) = CGEN_INSN_BITSIZE (insn);
-
- CGEN_INIT_EXTRACT (cd);
-
- for (syn = CGEN_SYNTAX_STRING (syntax); *syn; ++syn)
- {
- int length;
-
- if (CGEN_SYNTAX_CHAR_P (*syn))
- continue;
-
- length = (* cd->extract_operand) (cd, CGEN_SYNTAX_FIELD (*syn),
- ex_info, insn_value, fields, pc);
- if (length <= 0)
- return length;
- }
-
- /* We recognized and successfully extracted this insn. */
- return CGEN_INSN_BITSIZE (insn);
-}
-
-/* machine generated code added here */
-
-const char * openrisc_cgen_insert_operand
- PARAMS ((CGEN_CPU_DESC, int, CGEN_FIELDS *, CGEN_INSN_BYTES_PTR, bfd_vma));
-
-/* Main entry point for operand insertion.
-
- This function is basically just a big switch statement. Earlier versions
- used tables to look up the function to use, but
- - if the table contains both assembler and disassembler functions then
- the disassembler contains much of the assembler and vice-versa,
- - there's a lot of inlining possibilities as things grow,
- - using a switch statement avoids the function call overhead.
-
- This function could be moved into `parse_insn_normal', but keeping it
- separate makes clear the interface between `parse_insn_normal' and each of
- the handlers. It's also needed by GAS to insert operands that couldn't be
- resolved during parsing. */
-
-const char *
-openrisc_cgen_insert_operand (cd, opindex, fields, buffer, pc)
- CGEN_CPU_DESC cd;
- int opindex;
- CGEN_FIELDS * fields;
- CGEN_INSN_BYTES_PTR buffer;
- bfd_vma pc ATTRIBUTE_UNUSED;
-{
- const char * errmsg = NULL;
- unsigned int total_length = CGEN_FIELDS_BITSIZE (fields);
-
- switch (opindex)
- {
- case OPENRISC_OPERAND_ABS_26 :
- {
- long value = fields->f_abs26;
- value = ((unsigned int) (pc) >> (2));
- errmsg = insert_normal (cd, value, 0|(1<<CGEN_IFLD_SIGNED)|(1<<CGEN_IFLD_ABS_ADDR), 0, 25, 26, 32, total_length, buffer);
- }
- break;
- case OPENRISC_OPERAND_DISP_26 :
- {
- long value = fields->f_disp26;
- value = ((int) (((value) - (pc))) >> (2));
- errmsg = insert_normal (cd, value, 0|(1<<CGEN_IFLD_SIGNED)|(1<<CGEN_IFLD_PCREL_ADDR), 0, 25, 26, 32, total_length, buffer);
- }
- break;
- case OPENRISC_OPERAND_HI16 :
- errmsg = insert_normal (cd, fields->f_simm16, 0|(1<<CGEN_IFLD_SIGNED), 0, 15, 16, 32, total_length, buffer);
- break;
- case OPENRISC_OPERAND_LO16 :
- errmsg = insert_normal (cd, fields->f_lo16, 0|(1<<CGEN_IFLD_SIGNED), 0, 15, 16, 32, total_length, buffer);
- break;
- case OPENRISC_OPERAND_OP_F_23 :
- errmsg = insert_normal (cd, fields->f_op4, 0, 0, 23, 3, 32, total_length, buffer);
- break;
- case OPENRISC_OPERAND_OP_F_3 :
- errmsg = insert_normal (cd, fields->f_op5, 0, 0, 25, 5, 32, total_length, buffer);
- break;
- case OPENRISC_OPERAND_RA :
- errmsg = insert_normal (cd, fields->f_r2, 0, 0, 20, 5, 32, total_length, buffer);
- break;
- case OPENRISC_OPERAND_RB :
- errmsg = insert_normal (cd, fields->f_r3, 0, 0, 15, 5, 32, total_length, buffer);
- break;
- case OPENRISC_OPERAND_RD :
- errmsg = insert_normal (cd, fields->f_r1, 0, 0, 25, 5, 32, total_length, buffer);
- break;
- case OPENRISC_OPERAND_SIMM_16 :
- errmsg = insert_normal (cd, fields->f_simm16, 0|(1<<CGEN_IFLD_SIGNED), 0, 15, 16, 32, total_length, buffer);
- break;
- case OPENRISC_OPERAND_UI16NC :
- {
-{
- FLD (f_i16_2) = ((((unsigned int) (FLD (f_i16nc)) >> (11))) & (31));
- FLD (f_i16_1) = ((FLD (f_i16nc)) & (2047));
-}
- errmsg = insert_normal (cd, fields->f_i16_1, 0, 0, 10, 11, 32, total_length, buffer);
- if (errmsg)
- break;
- errmsg = insert_normal (cd, fields->f_i16_2, 0, 0, 25, 5, 32, total_length, buffer);
- if (errmsg)
- break;
- }
- break;
- case OPENRISC_OPERAND_UIMM_16 :
- errmsg = insert_normal (cd, fields->f_uimm16, 0, 0, 15, 16, 32, total_length, buffer);
- break;
- case OPENRISC_OPERAND_UIMM_5 :
- errmsg = insert_normal (cd, fields->f_uimm5, 0, 0, 4, 5, 32, total_length, buffer);
- break;
-
- default :
- /* xgettext:c-format */
- fprintf (stderr, _("Unrecognized field %d while building insn.\n"),
- opindex);
- abort ();
- }
-
- return errmsg;
-}
-
-int openrisc_cgen_extract_operand
- PARAMS ((CGEN_CPU_DESC, int, CGEN_EXTRACT_INFO *, CGEN_INSN_INT,
- CGEN_FIELDS *, bfd_vma));
-
-/* Main entry point for operand extraction.
- The result is <= 0 for error, >0 for success.
- ??? Actual values aren't well defined right now.
-
- This function is basically just a big switch statement. Earlier versions
- used tables to look up the function to use, but
- - if the table contains both assembler and disassembler functions then
- the disassembler contains much of the assembler and vice-versa,
- - there's a lot of inlining possibilities as things grow,
- - using a switch statement avoids the function call overhead.
-
- This function could be moved into `print_insn_normal', but keeping it
- separate makes clear the interface between `print_insn_normal' and each of
- the handlers. */
-
-int
-openrisc_cgen_extract_operand (cd, opindex, ex_info, insn_value, fields, pc)
- CGEN_CPU_DESC cd;
- int opindex;
- CGEN_EXTRACT_INFO *ex_info;
- CGEN_INSN_INT insn_value;
- CGEN_FIELDS * fields;
- bfd_vma pc;
-{
- /* Assume success (for those operands that are nops). */
- int length = 1;
- unsigned int total_length = CGEN_FIELDS_BITSIZE (fields);
-
- switch (opindex)
- {
- case OPENRISC_OPERAND_ABS_26 :
- {
- long value;
- length = extract_normal (cd, ex_info, insn_value, 0|(1<<CGEN_IFLD_SIGNED)|(1<<CGEN_IFLD_ABS_ADDR), 0, 25, 26, 32, total_length, pc, & value);
- value = ((value) << (2));
- fields->f_abs26 = value;
- }
- break;
- case OPENRISC_OPERAND_DISP_26 :
- {
- long value;
- length = extract_normal (cd, ex_info, insn_value, 0|(1<<CGEN_IFLD_SIGNED)|(1<<CGEN_IFLD_PCREL_ADDR), 0, 25, 26, 32, total_length, pc, & value);
- value = ((((value) << (2))) + (pc));
- fields->f_disp26 = value;
- }
- break;
- case OPENRISC_OPERAND_HI16 :
- length = extract_normal (cd, ex_info, insn_value, 0|(1<<CGEN_IFLD_SIGNED), 0, 15, 16, 32, total_length, pc, & fields->f_simm16);
- break;
- case OPENRISC_OPERAND_LO16 :
- length = extract_normal (cd, ex_info, insn_value, 0|(1<<CGEN_IFLD_SIGNED), 0, 15, 16, 32, total_length, pc, & fields->f_lo16);
- break;
- case OPENRISC_OPERAND_OP_F_23 :
- length = extract_normal (cd, ex_info, insn_value, 0, 0, 23, 3, 32, total_length, pc, & fields->f_op4);
- break;
- case OPENRISC_OPERAND_OP_F_3 :
- length = extract_normal (cd, ex_info, insn_value, 0, 0, 25, 5, 32, total_length, pc, & fields->f_op5);
- break;
- case OPENRISC_OPERAND_RA :
- length = extract_normal (cd, ex_info, insn_value, 0, 0, 20, 5, 32, total_length, pc, & fields->f_r2);
- break;
- case OPENRISC_OPERAND_RB :
- length = extract_normal (cd, ex_info, insn_value, 0, 0, 15, 5, 32, total_length, pc, & fields->f_r3);
- break;
- case OPENRISC_OPERAND_RD :
- length = extract_normal (cd, ex_info, insn_value, 0, 0, 25, 5, 32, total_length, pc, & fields->f_r1);
- break;
- case OPENRISC_OPERAND_SIMM_16 :
- length = extract_normal (cd, ex_info, insn_value, 0|(1<<CGEN_IFLD_SIGNED), 0, 15, 16, 32, total_length, pc, & fields->f_simm16);
- break;
- case OPENRISC_OPERAND_UI16NC :
- {
- length = extract_normal (cd, ex_info, insn_value, 0, 0, 10, 11, 32, total_length, pc, & fields->f_i16_1);
- if (length <= 0) break;
- length = extract_normal (cd, ex_info, insn_value, 0, 0, 25, 5, 32, total_length, pc, & fields->f_i16_2);
- if (length <= 0) break;
-{
- FLD (f_i16nc) = openrisc_sign_extend_16bit (((((FLD (f_i16_2)) << (11))) | (FLD (f_i16_1))));
-}
- }
- break;
- case OPENRISC_OPERAND_UIMM_16 :
- length = extract_normal (cd, ex_info, insn_value, 0, 0, 15, 16, 32, total_length, pc, & fields->f_uimm16);
- break;
- case OPENRISC_OPERAND_UIMM_5 :
- length = extract_normal (cd, ex_info, insn_value, 0, 0, 4, 5, 32, total_length, pc, & fields->f_uimm5);
- break;
-
- default :
- /* xgettext:c-format */
- fprintf (stderr, _("Unrecognized field %d while decoding insn.\n"),
- opindex);
- abort ();
- }
-
- return length;
-}
-
-cgen_insert_fn * const openrisc_cgen_insert_handlers[] =
-{
- insert_insn_normal,
-};
-
-cgen_extract_fn * const openrisc_cgen_extract_handlers[] =
-{
- extract_insn_normal,
-};
-
-int openrisc_cgen_get_int_operand
- PARAMS ((CGEN_CPU_DESC, int, const CGEN_FIELDS *));
-bfd_vma openrisc_cgen_get_vma_operand
- PARAMS ((CGEN_CPU_DESC, int, const CGEN_FIELDS *));
-
-/* Getting values from cgen_fields is handled by a collection of functions.
- They are distinguished by the type of the VALUE argument they return.
- TODO: floating point, inlining support, remove cases where result type
- not appropriate. */
-
-int
-openrisc_cgen_get_int_operand (cd, opindex, fields)
- CGEN_CPU_DESC cd ATTRIBUTE_UNUSED;
- int opindex;
- const CGEN_FIELDS * fields;
-{
- int value;
-
- switch (opindex)
- {
- case OPENRISC_OPERAND_ABS_26 :
- value = fields->f_abs26;
- break;
- case OPENRISC_OPERAND_DISP_26 :
- value = fields->f_disp26;
- break;
- case OPENRISC_OPERAND_HI16 :
- value = fields->f_simm16;
- break;
- case OPENRISC_OPERAND_LO16 :
- value = fields->f_lo16;
- break;
- case OPENRISC_OPERAND_OP_F_23 :
- value = fields->f_op4;
- break;
- case OPENRISC_OPERAND_OP_F_3 :
- value = fields->f_op5;
- break;
- case OPENRISC_OPERAND_RA :
- value = fields->f_r2;
- break;
- case OPENRISC_OPERAND_RB :
- value = fields->f_r3;
- break;
- case OPENRISC_OPERAND_RD :
- value = fields->f_r1;
- break;
- case OPENRISC_OPERAND_SIMM_16 :
- value = fields->f_simm16;
- break;
- case OPENRISC_OPERAND_UI16NC :
- value = fields->f_i16nc;
- break;
- case OPENRISC_OPERAND_UIMM_16 :
- value = fields->f_uimm16;
- break;
- case OPENRISC_OPERAND_UIMM_5 :
- value = fields->f_uimm5;
- break;
-
- default :
- /* xgettext:c-format */
- fprintf (stderr, _("Unrecognized field %d while getting int operand.\n"),
- opindex);
- abort ();
- }
-
- return value;
-}
-
-bfd_vma
-openrisc_cgen_get_vma_operand (cd, opindex, fields)
- CGEN_CPU_DESC cd ATTRIBUTE_UNUSED;
- int opindex;
- const CGEN_FIELDS * fields;
-{
- bfd_vma value;
-
- switch (opindex)
- {
- case OPENRISC_OPERAND_ABS_26 :
- value = fields->f_abs26;
- break;
- case OPENRISC_OPERAND_DISP_26 :
- value = fields->f_disp26;
- break;
- case OPENRISC_OPERAND_HI16 :
- value = fields->f_simm16;
- break;
- case OPENRISC_OPERAND_LO16 :
- value = fields->f_lo16;
- break;
- case OPENRISC_OPERAND_OP_F_23 :
- value = fields->f_op4;
- break;
- case OPENRISC_OPERAND_OP_F_3 :
- value = fields->f_op5;
- break;
- case OPENRISC_OPERAND_RA :
- value = fields->f_r2;
- break;
- case OPENRISC_OPERAND_RB :
- value = fields->f_r3;
- break;
- case OPENRISC_OPERAND_RD :
- value = fields->f_r1;
- break;
- case OPENRISC_OPERAND_SIMM_16 :
- value = fields->f_simm16;
- break;
- case OPENRISC_OPERAND_UI16NC :
- value = fields->f_i16nc;
- break;
- case OPENRISC_OPERAND_UIMM_16 :
- value = fields->f_uimm16;
- break;
- case OPENRISC_OPERAND_UIMM_5 :
- value = fields->f_uimm5;
- break;
-
- default :
- /* xgettext:c-format */
- fprintf (stderr, _("Unrecognized field %d while getting vma operand.\n"),
- opindex);
- abort ();
- }
-
- return value;
-}
-
-void openrisc_cgen_set_int_operand
- PARAMS ((CGEN_CPU_DESC, int, CGEN_FIELDS *, int));
-void openrisc_cgen_set_vma_operand
- PARAMS ((CGEN_CPU_DESC, int, CGEN_FIELDS *, bfd_vma));
-
-/* Stuffing values in cgen_fields is handled by a collection of functions.
- They are distinguished by the type of the VALUE argument they accept.
- TODO: floating point, inlining support, remove cases where argument type
- not appropriate. */
-
-void
-openrisc_cgen_set_int_operand (cd, opindex, fields, value)
- CGEN_CPU_DESC cd ATTRIBUTE_UNUSED;
- int opindex;
- CGEN_FIELDS * fields;
- int value;
-{
- switch (opindex)
- {
- case OPENRISC_OPERAND_ABS_26 :
- fields->f_abs26 = value;
- break;
- case OPENRISC_OPERAND_DISP_26 :
- fields->f_disp26 = value;
- break;
- case OPENRISC_OPERAND_HI16 :
- fields->f_simm16 = value;
- break;
- case OPENRISC_OPERAND_LO16 :
- fields->f_lo16 = value;
- break;
- case OPENRISC_OPERAND_OP_F_23 :
- fields->f_op4 = value;
- break;
- case OPENRISC_OPERAND_OP_F_3 :
- fields->f_op5 = value;
- break;
- case OPENRISC_OPERAND_RA :
- fields->f_r2 = value;
- break;
- case OPENRISC_OPERAND_RB :
- fields->f_r3 = value;
- break;
- case OPENRISC_OPERAND_RD :
- fields->f_r1 = value;
- break;
- case OPENRISC_OPERAND_SIMM_16 :
- fields->f_simm16 = value;
- break;
- case OPENRISC_OPERAND_UI16NC :
- fields->f_i16nc = value;
- break;
- case OPENRISC_OPERAND_UIMM_16 :
- fields->f_uimm16 = value;
- break;
- case OPENRISC_OPERAND_UIMM_5 :
- fields->f_uimm5 = value;
- break;
-
- default :
- /* xgettext:c-format */
- fprintf (stderr, _("Unrecognized field %d while setting int operand.\n"),
- opindex);
- abort ();
- }
-}
-
-void
-openrisc_cgen_set_vma_operand (cd, opindex, fields, value)
- CGEN_CPU_DESC cd ATTRIBUTE_UNUSED;
- int opindex;
- CGEN_FIELDS * fields;
- bfd_vma value;
-{
- switch (opindex)
- {
- case OPENRISC_OPERAND_ABS_26 :
- fields->f_abs26 = value;
- break;
- case OPENRISC_OPERAND_DISP_26 :
- fields->f_disp26 = value;
- break;
- case OPENRISC_OPERAND_HI16 :
- fields->f_simm16 = value;
- break;
- case OPENRISC_OPERAND_LO16 :
- fields->f_lo16 = value;
- break;
- case OPENRISC_OPERAND_OP_F_23 :
- fields->f_op4 = value;
- break;
- case OPENRISC_OPERAND_OP_F_3 :
- fields->f_op5 = value;
- break;
- case OPENRISC_OPERAND_RA :
- fields->f_r2 = value;
- break;
- case OPENRISC_OPERAND_RB :
- fields->f_r3 = value;
- break;
- case OPENRISC_OPERAND_RD :
- fields->f_r1 = value;
- break;
- case OPENRISC_OPERAND_SIMM_16 :
- fields->f_simm16 = value;
- break;
- case OPENRISC_OPERAND_UI16NC :
- fields->f_i16nc = value;
- break;
- case OPENRISC_OPERAND_UIMM_16 :
- fields->f_uimm16 = value;
- break;
- case OPENRISC_OPERAND_UIMM_5 :
- fields->f_uimm5 = value;
- break;
-
- default :
- /* xgettext:c-format */
- fprintf (stderr, _("Unrecognized field %d while setting vma operand.\n"),
- opindex);
- abort ();
- }
-}
-
-/* Function to call before using the instruction builder tables. */
-
-void
-openrisc_cgen_init_ibld_table (cd)
- CGEN_CPU_DESC cd;
-{
- cd->insert_handlers = & openrisc_cgen_insert_handlers[0];
- cd->extract_handlers = & openrisc_cgen_extract_handlers[0];
-
- cd->insert_operand = openrisc_cgen_insert_operand;
- cd->extract_operand = openrisc_cgen_extract_operand;
-
- cd->get_int_operand = openrisc_cgen_get_int_operand;
- cd->set_int_operand = openrisc_cgen_set_int_operand;
- cd->get_vma_operand = openrisc_cgen_get_vma_operand;
- cd->set_vma_operand = openrisc_cgen_set_vma_operand;
-}
diff --unified -N -r ../binutils-2.16.1/opcodes/openrisc-opc.c binutils-2.16.1/opcodes/openrisc-opc.c
--- ../binutils-2.16.1/opcodes/openrisc-opc.c 2005-02-22 01:33:20.000000000 +0100
+++ binutils-2.16.1/opcodes/openrisc-opc.c 1970-01-01 01:00:00.000000000 +0100
@@ -1,707 +0,0 @@
-/* Instruction opcode table for openrisc.
-
-THIS FILE IS MACHINE GENERATED WITH CGEN.
-
-Copyright 1996-2005 Free Software Foundation, Inc.
-
-This file is part of the GNU Binutils and/or GDB, the GNU debugger.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along
-with this program; if not, write to the Free Software Foundation, Inc.,
-59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-*/
-
-#include "sysdep.h"
-#include "ansidecl.h"
-#include "bfd.h"
-#include "symcat.h"
-#include "openrisc-desc.h"
-#include "openrisc-opc.h"
-#include "libiberty.h"
-
-/* -- opc.c */
-/* -- */
-/* The hash functions are recorded here to help keep assembler code out of
- the disassembler and vice versa. */
-
-static int asm_hash_insn_p PARAMS ((const CGEN_INSN *));
-static unsigned int asm_hash_insn PARAMS ((const char *));
-static int dis_hash_insn_p PARAMS ((const CGEN_INSN *));
-static unsigned int dis_hash_insn PARAMS ((const char *, CGEN_INSN_INT));
-
-/* Instruction formats. */
-
-#if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
-#define F(f) & openrisc_cgen_ifld_table[OPENRISC_##f]
-#else
-#define F(f) & openrisc_cgen_ifld_table[OPENRISC_/**/f]
-#endif
-static const CGEN_IFMT ifmt_empty ATTRIBUTE_UNUSED = {
- 0, 0, 0x0, { { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_j ATTRIBUTE_UNUSED = {
- 32, 32, 0xfc000000, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_ABS26) }, { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_jr ATTRIBUTE_UNUSED = {
- 32, 32, 0xffe00000, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_OP3) }, { F (F_OP4) }, { F (F_R2) }, { F (F_UIMM16) }, { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_bal ATTRIBUTE_UNUSED = {
- 32, 32, 0xfc000000, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_DISP26) }, { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_movhi ATTRIBUTE_UNUSED = {
- 32, 32, 0xfc000000, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_R1) }, { F (F_R2) }, { F (F_SIMM16) }, { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_mfsr ATTRIBUTE_UNUSED = {
- 32, 32, 0xfc000000, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_R1) }, { F (F_R2) }, { F (F_UIMM16) }, { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_mtsr ATTRIBUTE_UNUSED = {
- 32, 32, 0xfc0007ff, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_R1) }, { F (F_R2) }, { F (F_R3) }, { F (F_I16_1) }, { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_lw ATTRIBUTE_UNUSED = {
- 32, 32, 0xfc000000, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_R1) }, { F (F_R2) }, { F (F_SIMM16) }, { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_sw ATTRIBUTE_UNUSED = {
- 32, 32, 0xfc000000, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_R1) }, { F (F_R3) }, { F (F_I16NC) }, { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_sll ATTRIBUTE_UNUSED = {
- 32, 32, 0xfc0007ff, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_R1) }, { F (F_R2) }, { F (F_R3) }, { F (F_F_10_3) }, { F (F_OP6) }, { F (F_F_4_1) }, { F (F_OP7) }, { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_slli ATTRIBUTE_UNUSED = {
- 32, 32, 0xfc00ffe0, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_R1) }, { F (F_R2) }, { F (F_F_15_8) }, { F (F_OP6) }, { F (F_UIMM5) }, { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_add ATTRIBUTE_UNUSED = {
- 32, 32, 0xfc0007ff, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_R1) }, { F (F_R2) }, { F (F_R3) }, { F (F_F_10_7) }, { F (F_OP7) }, { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_addi ATTRIBUTE_UNUSED = {
- 32, 32, 0xfc000000, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_R1) }, { F (F_R2) }, { F (F_LO16) }, { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_sfgts ATTRIBUTE_UNUSED = {
- 32, 32, 0xffe007ff, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_OP5) }, { F (F_R2) }, { F (F_R3) }, { F (F_F_10_11) }, { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_sfgtsi ATTRIBUTE_UNUSED = {
- 32, 32, 0xffe00000, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_OP5) }, { F (F_R2) }, { F (F_SIMM16) }, { 0 } }
-};
-
-static const CGEN_IFMT ifmt_l_sfgtui ATTRIBUTE_UNUSED = {
- 32, 32, 0xffe00000, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_OP5) }, { F (F_R2) }, { F (F_UIMM16) }, { 0 } }
-};
-
-#undef F
-
-#if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
-#define A(a) (1 << CGEN_INSN_##a)
-#else
-#define A(a) (1 << CGEN_INSN_/**/a)
-#endif
-#if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
-#define OPERAND(op) OPENRISC_OPERAND_##op
-#else
-#define OPERAND(op) OPENRISC_OPERAND_/**/op
-#endif
-#define MNEM CGEN_SYNTAX_MNEMONIC /* syntax value for mnemonic */
-#define OP(field) CGEN_SYNTAX_MAKE_FIELD (OPERAND (field))
-
-/* The instruction table. */
-
-static const CGEN_OPCODE openrisc_cgen_insn_opcode_table[MAX_INSNS] =
-{
- /* Special null first entry.
- A `num' value of zero is thus invalid.
- Also, the special `invalid' insn resides here. */
- { { 0, 0, 0, 0 }, {{0}}, 0, {0}},
-/* l.j ${abs-26} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (ABS_26), 0 } },
- & ifmt_l_j, { 0x0 }
- },
-/* l.jal ${abs-26} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (ABS_26), 0 } },
- & ifmt_l_j, { 0x4000000 }
- },
-/* l.jr $rA */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), 0 } },
- & ifmt_l_jr, { 0x14000000 }
- },
-/* l.jalr $rA */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), 0 } },
- & ifmt_l_jr, { 0x14200000 }
- },
-/* l.bal ${disp-26} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (DISP_26), 0 } },
- & ifmt_l_bal, { 0x8000000 }
- },
-/* l.bnf ${disp-26} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (DISP_26), 0 } },
- & ifmt_l_bal, { 0xc000000 }
- },
-/* l.bf ${disp-26} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (DISP_26), 0 } },
- & ifmt_l_bal, { 0x10000000 }
- },
-/* l.brk ${uimm-16} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (UIMM_16), 0 } },
- & ifmt_l_jr, { 0x17000000 }
- },
-/* l.rfe $rA */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), 0 } },
- & ifmt_l_jr, { 0x14400000 }
- },
-/* l.sys ${uimm-16} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (UIMM_16), 0 } },
- & ifmt_l_jr, { 0x16000000 }
- },
-/* l.nop */
- {
- { 0, 0, 0, 0 },
- { { MNEM, 0 } },
- & ifmt_l_jr, { 0x15000000 }
- },
-/* l.movhi $rD,$hi16 */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (HI16), 0 } },
- & ifmt_l_movhi, { 0x18000000 }
- },
-/* l.mfsr $rD,$rA */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), 0 } },
- & ifmt_l_mfsr, { 0x1c000000 }
- },
-/* l.mtsr $rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_mtsr, { 0x40000000 }
- },
-/* l.lw $rD,${simm-16}($rA) */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (SIMM_16), '(', OP (RA), ')', 0 } },
- & ifmt_l_lw, { 0x80000000 }
- },
-/* l.lbz $rD,${simm-16}($rA) */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (SIMM_16), '(', OP (RA), ')', 0 } },
- & ifmt_l_lw, { 0x84000000 }
- },
-/* l.lbs $rD,${simm-16}($rA) */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (SIMM_16), '(', OP (RA), ')', 0 } },
- & ifmt_l_lw, { 0x88000000 }
- },
-/* l.lhz $rD,${simm-16}($rA) */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (SIMM_16), '(', OP (RA), ')', 0 } },
- & ifmt_l_lw, { 0x8c000000 }
- },
-/* l.lhs $rD,${simm-16}($rA) */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (SIMM_16), '(', OP (RA), ')', 0 } },
- & ifmt_l_lw, { 0x90000000 }
- },
-/* l.sw ${ui16nc}($rA),$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (UI16NC), '(', OP (RA), ')', ',', OP (RB), 0 } },
- & ifmt_l_sw, { 0xd4000000 }
- },
-/* l.sb ${ui16nc}($rA),$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (UI16NC), '(', OP (RA), ')', ',', OP (RB), 0 } },
- & ifmt_l_sw, { 0xd8000000 }
- },
-/* l.sh ${ui16nc}($rA),$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (UI16NC), '(', OP (RA), ')', ',', OP (RB), 0 } },
- & ifmt_l_sw, { 0xdc000000 }
- },
-/* l.sll $rD,$rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_sll, { 0xe0000008 }
- },
-/* l.slli $rD,$rA,${uimm-5} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (UIMM_5), 0 } },
- & ifmt_l_slli, { 0xb4000000 }
- },
-/* l.srl $rD,$rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_sll, { 0xe0000028 }
- },
-/* l.srli $rD,$rA,${uimm-5} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (UIMM_5), 0 } },
- & ifmt_l_slli, { 0xb4000020 }
- },
-/* l.sra $rD,$rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_sll, { 0xe0000048 }
- },
-/* l.srai $rD,$rA,${uimm-5} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (UIMM_5), 0 } },
- & ifmt_l_slli, { 0xb4000040 }
- },
-/* l.ror $rD,$rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_sll, { 0xe0000088 }
- },
-/* l.rori $rD,$rA,${uimm-5} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (UIMM_5), 0 } },
- & ifmt_l_slli, { 0xb4000080 }
- },
-/* l.add $rD,$rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_add, { 0xe0000000 }
- },
-/* l.addi $rD,$rA,$lo16 */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (LO16), 0 } },
- & ifmt_l_addi, { 0x94000000 }
- },
-/* l.sub $rD,$rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_add, { 0xe0000002 }
- },
-/* l.subi $rD,$rA,$lo16 */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (LO16), 0 } },
- & ifmt_l_addi, { 0x9c000000 }
- },
-/* l.and $rD,$rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_add, { 0xe0000003 }
- },
-/* l.andi $rD,$rA,$lo16 */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (LO16), 0 } },
- & ifmt_l_addi, { 0xa0000000 }
- },
-/* l.or $rD,$rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_add, { 0xe0000004 }
- },
-/* l.ori $rD,$rA,$lo16 */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (LO16), 0 } },
- & ifmt_l_addi, { 0xa4000000 }
- },
-/* l.xor $rD,$rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_add, { 0xe0000005 }
- },
-/* l.xori $rD,$rA,$lo16 */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (LO16), 0 } },
- & ifmt_l_addi, { 0xa8000000 }
- },
-/* l.mul $rD,$rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_add, { 0xe0000006 }
- },
-/* l.muli $rD,$rA,$lo16 */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (LO16), 0 } },
- & ifmt_l_addi, { 0xac000000 }
- },
-/* l.div $rD,$rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_add, { 0xe0000009 }
- },
-/* l.divu $rD,$rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RD), ',', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_add, { 0xe000000a }
- },
-/* l.sfgts $rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_sfgts, { 0xe4c00000 }
- },
-/* l.sfgtu $rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_sfgts, { 0xe4400000 }
- },
-/* l.sfges $rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_sfgts, { 0xe4e00000 }
- },
-/* l.sfgeu $rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_sfgts, { 0xe4600000 }
- },
-/* l.sflts $rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_sfgts, { 0xe5000000 }
- },
-/* l.sfltu $rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_sfgts, { 0xe4800000 }
- },
-/* l.sfles $rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_sfgts, { 0xe5200000 }
- },
-/* l.sfleu $rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_sfgts, { 0xe4a00000 }
- },
-/* l.sfgtsi $rA,${simm-16} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (SIMM_16), 0 } },
- & ifmt_l_sfgtsi, { 0xb8c00000 }
- },
-/* l.sfgtui $rA,${uimm-16} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (UIMM_16), 0 } },
- & ifmt_l_sfgtui, { 0xb8400000 }
- },
-/* l.sfgesi $rA,${simm-16} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (SIMM_16), 0 } },
- & ifmt_l_sfgtsi, { 0xb8e00000 }
- },
-/* l.sfgeui $rA,${uimm-16} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (UIMM_16), 0 } },
- & ifmt_l_sfgtui, { 0xb8600000 }
- },
-/* l.sfltsi $rA,${simm-16} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (SIMM_16), 0 } },
- & ifmt_l_sfgtsi, { 0xb9000000 }
- },
-/* l.sfltui $rA,${uimm-16} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (UIMM_16), 0 } },
- & ifmt_l_sfgtui, { 0xb8800000 }
- },
-/* l.sflesi $rA,${simm-16} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (SIMM_16), 0 } },
- & ifmt_l_sfgtsi, { 0xb9200000 }
- },
-/* l.sfleui $rA,${uimm-16} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (UIMM_16), 0 } },
- & ifmt_l_sfgtui, { 0xb8a00000 }
- },
-/* l.sfeq $rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_sfgts, { 0xe4000000 }
- },
-/* l.sfeqi $rA,${simm-16} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (SIMM_16), 0 } },
- & ifmt_l_sfgtsi, { 0xb8000000 }
- },
-/* l.sfne $rA,$rB */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (RB), 0 } },
- & ifmt_l_sfgts, { 0xe4200000 }
- },
-/* l.sfnei $rA,${simm-16} */
- {
- { 0, 0, 0, 0 },
- { { MNEM, ' ', OP (RA), ',', OP (SIMM_16), 0 } },
- & ifmt_l_sfgtsi, { 0xb8200000 }
- },
-};
-
-#undef A
-#undef OPERAND
-#undef MNEM
-#undef OP
-
-/* Formats for ALIAS macro-insns. */
-
-#if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
-#define F(f) & openrisc_cgen_ifld_table[OPENRISC_##f]
-#else
-#define F(f) & openrisc_cgen_ifld_table[OPENRISC_/**/f]
-#endif
-static const CGEN_IFMT ifmt_l_ret ATTRIBUTE_UNUSED = {
- 32, 32, 0xffffffff, { { F (F_CLASS) }, { F (F_SUB) }, { F (F_OP3) }, { F (F_OP4) }, { F (F_R2) }, { F (F_UIMM16) }, { 0 } }
-};
-
-#undef F
-
-/* Each non-simple macro entry points to an array of expansion possibilities. */
-
-#if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
-#define A(a) (1 << CGEN_INSN_##a)
-#else
-#define A(a) (1 << CGEN_INSN_/**/a)
-#endif
-#if defined (__STDC__) || defined (ALMOST_STDC) || defined (HAVE_STRINGIZE)
-#define OPERAND(op) OPENRISC_OPERAND_##op
-#else
-#define OPERAND(op) OPENRISC_OPERAND_/**/op
-#endif
-#define MNEM CGEN_SYNTAX_MNEMONIC /* syntax value for mnemonic */
-#define OP(field) CGEN_SYNTAX_MAKE_FIELD (OPERAND (field))
-
-/* The macro instruction table. */
-
-static const CGEN_IBASE openrisc_cgen_macro_insn_table[] =
-{
-/* l.ret */
- {
- -1, "l-ret", "l.ret", 32,
- { 0|A(ALIAS), { (1<<MACH_BASE) } }
- },
-};
-
-/* The macro instruction opcode table. */
-
-static const CGEN_OPCODE openrisc_cgen_macro_insn_opcode_table[] =
-{
-/* l.ret */
- {
- { 0, 0, 0, 0 },
- { { MNEM, 0 } },
- & ifmt_l_ret, { 0x140b0000 }
- },
-};
-
-#undef A
-#undef OPERAND
-#undef MNEM
-#undef OP
-
-#ifndef CGEN_ASM_HASH_P
-#define CGEN_ASM_HASH_P(insn) 1
-#endif
-
-#ifndef CGEN_DIS_HASH_P
-#define CGEN_DIS_HASH_P(insn) 1
-#endif
-
-/* Return non-zero if INSN is to be added to the hash table.
- Targets are free to override CGEN_{ASM,DIS}_HASH_P in the .opc file. */
-
-static int
-asm_hash_insn_p (insn)
- const CGEN_INSN *insn ATTRIBUTE_UNUSED;
-{
- return CGEN_ASM_HASH_P (insn);
-}
-
-static int
-dis_hash_insn_p (insn)
- const CGEN_INSN *insn;
-{
- /* If building the hash table and the NO-DIS attribute is present,
- ignore. */
- if (CGEN_INSN_ATTR_VALUE (insn, CGEN_INSN_NO_DIS))
- return 0;
- return CGEN_DIS_HASH_P (insn);
-}
-
-#ifndef CGEN_ASM_HASH
-#define CGEN_ASM_HASH_SIZE 127
-#ifdef CGEN_MNEMONIC_OPERANDS
-#define CGEN_ASM_HASH(mnem) (*(unsigned char *) (mnem) % CGEN_ASM_HASH_SIZE)
-#else
-#define CGEN_ASM_HASH(mnem) (*(unsigned char *) (mnem) % CGEN_ASM_HASH_SIZE) /*FIXME*/
-#endif
-#endif
-
-/* It doesn't make much sense to provide a default here,
- but while this is under development we do.
- BUFFER is a pointer to the bytes of the insn, target order.
- VALUE is the first base_insn_bitsize bits as an int in host order. */
-
-#ifndef CGEN_DIS_HASH
-#define CGEN_DIS_HASH_SIZE 256
-#define CGEN_DIS_HASH(buf, value) (*(unsigned char *) (buf))
-#endif
-
-/* The result is the hash value of the insn.
- Targets are free to override CGEN_{ASM,DIS}_HASH in the .opc file. */
-
-static unsigned int
-asm_hash_insn (mnem)
- const char * mnem;
-{
- return CGEN_ASM_HASH (mnem);
-}
-
-/* BUF is a pointer to the bytes of the insn, target order.
- VALUE is the first base_insn_bitsize bits as an int in host order. */
-
-static unsigned int
-dis_hash_insn (buf, value)
- const char * buf ATTRIBUTE_UNUSED;
- CGEN_INSN_INT value ATTRIBUTE_UNUSED;
-{
- return CGEN_DIS_HASH (buf, value);
-}
-
-static void set_fields_bitsize PARAMS ((CGEN_FIELDS *, int));
-
-/* Set the recorded length of the insn in the CGEN_FIELDS struct. */
-
-static void
-set_fields_bitsize (fields, size)
- CGEN_FIELDS *fields;
- int size;
-{
- CGEN_FIELDS_BITSIZE (fields) = size;
-}
-
-/* Function to call before using the operand instance table.
- This plugs the opcode entries and macro instructions into the cpu table. */
-
-void
-openrisc_cgen_init_opcode_table (cd)
- CGEN_CPU_DESC cd;
-{
- int i;
- int num_macros = (sizeof (openrisc_cgen_macro_insn_table) /
- sizeof (openrisc_cgen_macro_insn_table[0]));
- const CGEN_IBASE *ib = & openrisc_cgen_macro_insn_table[0];
- const CGEN_OPCODE *oc = & openrisc_cgen_macro_insn_opcode_table[0];
- CGEN_INSN *insns = (CGEN_INSN *) xmalloc (num_macros * sizeof (CGEN_INSN));
- memset (insns, 0, num_macros * sizeof (CGEN_INSN));
- for (i = 0; i < num_macros; ++i)
- {
- insns[i].base = &ib[i];
- insns[i].opcode = &oc[i];
- openrisc_cgen_build_insn_regex (& insns[i]);
- }
- cd->macro_insn_table.init_entries = insns;
- cd->macro_insn_table.entry_size = sizeof (CGEN_IBASE);
- cd->macro_insn_table.num_init_entries = num_macros;
-
- oc = & openrisc_cgen_insn_opcode_table[0];
- insns = (CGEN_INSN *) cd->insn_table.init_entries;
- for (i = 0; i < MAX_INSNS; ++i)
- {
- insns[i].opcode = &oc[i];
- openrisc_cgen_build_insn_regex (& insns[i]);
- }
-
- cd->sizeof_fields = sizeof (CGEN_FIELDS);
- cd->set_fields_bitsize = set_fields_bitsize;
-
- cd->asm_hash_p = asm_hash_insn_p;
- cd->asm_hash = asm_hash_insn;
- cd->asm_hash_size = CGEN_ASM_HASH_SIZE;
-
- cd->dis_hash_p = dis_hash_insn_p;
- cd->dis_hash = dis_hash_insn;
- cd->dis_hash_size = CGEN_DIS_HASH_SIZE;
-}
diff --unified -N -r ../binutils-2.16.1/opcodes/openrisc-opc.h binutils-2.16.1/opcodes/openrisc-opc.h
--- ../binutils-2.16.1/opcodes/openrisc-opc.h 2005-02-22 01:33:20.000000000 +0100
+++ binutils-2.16.1/opcodes/openrisc-opc.h 1970-01-01 01:00:00.000000000 +0100
@@ -1,113 +0,0 @@
-/* Instruction opcode header for openrisc.
-
-THIS FILE IS MACHINE GENERATED WITH CGEN.
-
-Copyright 1996-2005 Free Software Foundation, Inc.
-
-This file is part of the GNU Binutils and/or GDB, the GNU debugger.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License along
-with this program; if not, write to the Free Software Foundation, Inc.,
-59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-*/
-
-#ifndef OPENRISC_OPC_H
-#define OPENRISC_OPC_H
-
-/* -- opc.h */
-#undef CGEN_DIS_HASH_SIZE
-#define CGEN_DIS_HASH_SIZE 64
-#undef CGEN_DIS_HASH
-#define CGEN_DIS_HASH(buffer, value) (((unsigned char *) (buffer))[0] >> 2)
-
-extern long openrisc_sign_extend_16bit PARAMS ((long));
-/* -- */
-/* Enum declaration for openrisc instruction types. */
-typedef enum cgen_insn_type {
- OPENRISC_INSN_INVALID, OPENRISC_INSN_L_J, OPENRISC_INSN_L_JAL, OPENRISC_INSN_L_JR
- , OPENRISC_INSN_L_JALR, OPENRISC_INSN_L_BAL, OPENRISC_INSN_L_BNF, OPENRISC_INSN_L_BF
- , OPENRISC_INSN_L_BRK, OPENRISC_INSN_L_RFE, OPENRISC_INSN_L_SYS, OPENRISC_INSN_L_NOP
- , OPENRISC_INSN_L_MOVHI, OPENRISC_INSN_L_MFSR, OPENRISC_INSN_L_MTSR, OPENRISC_INSN_L_LW
- , OPENRISC_INSN_L_LBZ, OPENRISC_INSN_L_LBS, OPENRISC_INSN_L_LHZ, OPENRISC_INSN_L_LHS
- , OPENRISC_INSN_L_SW, OPENRISC_INSN_L_SB, OPENRISC_INSN_L_SH, OPENRISC_INSN_L_SLL
- , OPENRISC_INSN_L_SLLI, OPENRISC_INSN_L_SRL, OPENRISC_INSN_L_SRLI, OPENRISC_INSN_L_SRA
- , OPENRISC_INSN_L_SRAI, OPENRISC_INSN_L_ROR, OPENRISC_INSN_L_RORI, OPENRISC_INSN_L_ADD
- , OPENRISC_INSN_L_ADDI, OPENRISC_INSN_L_SUB, OPENRISC_INSN_L_SUBI, OPENRISC_INSN_L_AND
- , OPENRISC_INSN_L_ANDI, OPENRISC_INSN_L_OR, OPENRISC_INSN_L_ORI, OPENRISC_INSN_L_XOR
- , OPENRISC_INSN_L_XORI, OPENRISC_INSN_L_MUL, OPENRISC_INSN_L_MULI, OPENRISC_INSN_L_DIV
- , OPENRISC_INSN_L_DIVU, OPENRISC_INSN_L_SFGTS, OPENRISC_INSN_L_SFGTU, OPENRISC_INSN_L_SFGES
- , OPENRISC_INSN_L_SFGEU, OPENRISC_INSN_L_SFLTS, OPENRISC_INSN_L_SFLTU, OPENRISC_INSN_L_SFLES
- , OPENRISC_INSN_L_SFLEU, OPENRISC_INSN_L_SFGTSI, OPENRISC_INSN_L_SFGTUI, OPENRISC_INSN_L_SFGESI
- , OPENRISC_INSN_L_SFGEUI, OPENRISC_INSN_L_SFLTSI, OPENRISC_INSN_L_SFLTUI, OPENRISC_INSN_L_SFLESI
- , OPENRISC_INSN_L_SFLEUI, OPENRISC_INSN_L_SFEQ, OPENRISC_INSN_L_SFEQI, OPENRISC_INSN_L_SFNE
- , OPENRISC_INSN_L_SFNEI
-} CGEN_INSN_TYPE;
-
-/* Index of `invalid' insn place holder. */
-#define CGEN_INSN_INVALID OPENRISC_INSN_INVALID
-
-/* Total number of insns in table. */
-#define MAX_INSNS ((int) OPENRISC_INSN_L_SFNEI + 1)
-
-/* This struct records data prior to insertion or after extraction. */
-struct cgen_fields
-{
- int length;
- long f_nil;
- long f_anyof;
- long f_class;
- long f_sub;
- long f_r1;
- long f_r2;
- long f_r3;
- long f_simm16;
- long f_uimm16;
- long f_uimm5;
- long f_hi16;
- long f_lo16;
- long f_op1;
- long f_op2;
- long f_op3;
- long f_op4;
- long f_op5;
- long f_op6;
- long f_op7;
- long f_i16_1;
- long f_i16_2;
- long f_disp26;
- long f_abs26;
- long f_i16nc;
- long f_f_15_8;
- long f_f_10_3;
- long f_f_4_1;
- long f_f_7_3;
- long f_f_10_7;
- long f_f_10_11;
-};
-
-#define CGEN_INIT_PARSE(od) \
-{\
-}
-#define CGEN_INIT_INSERT(od) \
-{\
-}
-#define CGEN_INIT_EXTRACT(od) \
-{\
-}
-#define CGEN_INIT_PRINT(od) \
-{\
-}
-
-
-#endif /* OPENRISC_OPC_H */
Go to most recent revision | Compare with Previous | Blame | View Log