OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [ecos-2.0/] [packages/] [hal/] [mips/] [atlas/] [v2_0/] [src/] [platform.S] - Rev 1765

Compare with Previous | Blame | View Log

##
#=============================================================================
##      platform.S
##
##      MIPS Atlas platform code
##
##=============================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
##=============================================================================
#######DESCRIPTIONBEGIN####
##
## Author(s):   dmoseley
## Contributors:        dmoseley
## Date:        2000-06-06
## Purpose:     MIPS Atlas platform code
## Description: Platform specific code for Atlas board.
##
##
##
##
######DESCRIPTIONEND####
##
##=============================================================================

#include <pkgconf/system.h>
#include <pkgconf/hal.h>

#ifdef CYGPKG_KERNEL
# include <pkgconf/kernel.h>
#endif

#include <cyg/hal/arch.inc>
#include <cyg/hal/plf_io.h>
#include <cyg/hal/hal_arch.h>

##-----------------------------------------------------------------------------

##-----------------------------------------------------------------------------
# Platform Initialization.
# This code performs platform specific initialization.

##-----------------------------------------------------------------------------
## MEMC initialization.
##

#if defined(CYG_HAL_STARTUP_ROM) || defined(CYG_HAL_STARTUP_ROMRAM)

        .text
        .set    noreorder


.macro MASK_WRITE_PCI_REG regnum, devnum, mask
        .set noreorder
        # First, read the appropriate register
        li      t0, HAL_GALILEO_PCI0_CONFIG_ADDR_ConfigEn | \regnum | \devnum
        sw      t0, HAL_GALILEO_PCI0_CONFIG_ADDR_OFFSET(s7)
        lw      t1, HAL_GALILEO_PCI0_CONFIG_DATA_OFFSET(s7)

        # Now, mask in the appropriate bits
        li      t2, \mask
        or      t1, t2

        # Write the updated value
        li      t0, HAL_GALILEO_PCI0_CONFIG_ADDR_ConfigEn | \regnum | \devnum
        sw      t0, HAL_GALILEO_PCI0_CONFIG_ADDR_OFFSET(s7)
        sw      t1, HAL_GALILEO_PCI0_CONFIG_DATA_OFFSET(s7)
.endm

.macro WRITE_PCI_REG regnum, devnum, base
        .set noreorder
        li      t0, HAL_GALILEO_PCI0_CONFIG_ADDR_ConfigEn | \regnum | \devnum
        li      t1, \base
        sw      t0, HAL_GALILEO_PCI0_CONFIG_ADDR_OFFSET(s7)
        sw      t1, HAL_GALILEO_PCI0_CONFIG_DATA_OFFSET(s7)
.endm

#define NO_MASK        0
#define NO_ERROR_CHECK 0
#define ERROR_CHECK    1
.macro READ_SPD_VALUE func, mask, ret_reg, err_check
        .set noreorder
        jal     read_spd_value
        li      a0, \func                        # delay slot
.if \err_check
        beq     v0, zero, error
        nop
.endif
        move    \ret_reg, v0
.if \mask
        and     \ret_reg, \mask
.endif
.endm

##-----------------------------------------------------------------------------
##
## Initialize the RAM.
##
## To do that, we need to first initialize the Galileo PCI stuff to gain access
## to the SAA9730.
## From there, use the I2C bus of the SAA9730 to read the SPD SDRAM
## config data. We then setup the Galileo SDRAM configuration
##
##  Returns
##  v0 = Error Code
##  v1 = SDRAM size
##
FUNC_START(hal_atlas_init_sdram)

        .set noreorder

        # Save the return address
        move    s8, ra

        # Setup the base address registers
        li      s7, CYGARC_UNCACHED_ADDRESS(HAL_GALILEO_REGISTER_BASE)

        # Setup the Galileo controller Endian configuration
        li      t0, (HAL_GALILEO_BYTE_SWAP)
        sw      t0, HAL_GALILEO_PCI_INTERNAL_COMMAND_OFFSET(s7)

        # Setup the PCI_0 Timeout and retry configuration
        li      t0, HAL_GALILEO_PCI0_TIMEOUT_RETRY_VALUE
        sw      t0, HAL_GALILEO_PCI0_TIMEOUT_RETRY_OFFSET(s7)

        # Setup Galileo as PCI Master
        MASK_WRITE_PCI_REG HAL_GALILEO_PCI0_STATUS_COMMAND_REGNUM, HAL_ATLAS_NULL_DEVNUM, \
                           (HAL_GALILEO_PCI0_CONFIG_MEMEn | HAL_GALILEO_PCI0_CONFIG_MasEn | HAL_GALILEO_PCI0_CONFIG_SErrEn)

        # Setup Galileo PCI latency timer
        MASK_WRITE_PCI_REG HAL_GALILEO_PCI0_BIST_REGNUM, HAL_ATLAS_NULL_DEVNUM, \
                           HAL_GALILEO_PCI0_LAT_TIMER_VAL

        # Setup base address for SAA9730
        WRITE_PCI_REG HAL_GALILEO_PCI0_SCS32_BASE_REGNUM, HAL_ATLAS_SAA9730_DEVNUM, \
                      CYGARC_PHYSICAL_ADDRESS(HAL_GALILEO_PCI0_MEM0_BASE)

        # Setup SAA9730 command and status register
        MASK_WRITE_PCI_REG HAL_GALILEO_PCI0_STATUS_COMMAND_REGNUM, HAL_ATLAS_SAA9730_DEVNUM, \
                           (HAL_GALILEO_PCI0_CONFIG_MEMEn | HAL_GALILEO_PCI0_CONFIG_SErrEn)

        # Init the I2C controller
        li      t0, HAL_SAA9730_I2CSC_I2CCC_6400
        li      t1, CYGARC_UNCACHED_ADDRESS(HAL_GALILEO_PCI0_MEM0_BASE)
        sw      t0, HAL_SAA9730_I2CSC_OFFSET(t1)

        ##=====================================================================================
        ##
        ## Read the SPD device parameters and determine memory size
        ##
        READ_SPD_VALUE HAL_SPD_GET_NUM_ROW_BITS, 0xf, s0, ERROR_CHECK
        READ_SPD_VALUE HAL_SPD_GET_NUM_COL_BITS, 0xf, s1, ERROR_CHECK
        READ_SPD_VALUE HAL_SPD_GET_NUM_DEVICE_BANKS, NO_MASK, s2, ERROR_CHECK

        READ_SPD_VALUE HAL_SPD_GET_SDRAM_WIDTH, 0x7f, s3, ERROR_CHECK
        READ_SPD_VALUE HAL_SPD_GET_NUM_MODULE_BANKS, NO_MASK, s4, ERROR_CHECK
        READ_SPD_VALUE HAL_SPD_GET_ROW_DENSITY, NO_MASK, s5, ERROR_CHECK

        #
        # Determine Size
        #     SIZE = SDRAM_WIDTH * NUM_DEVICE_BANKS * 2 ^ (NUM_ROW_BITS + NUM_COL_BITS)
        #
        addu    t0, s0, s1              # t0 = (NUM_ROW_BITS + NUM_COL_BITS)
        li      t1, 1                   # t1 = 2 ^ 0
        sll     t1, t0                  # t1 = 2 ^ (NUM_ROW_BITS + NUM_COL_BITS)
        multu   s2, t1
        mflo    s6                      # s6 = NUM_DEVICE_BANKS * 2 ^ (NUM_ROW_BITS + NUM_COL_BITS)
        nop
        nop
        nop
        multu   s6, s3
        mflo    s6                      # s6 = SDRAM_WIDTH * NUM_DEVICE_BANKS * 2 ^ (NUM_ROW_BITS + NUM_COL_BITS)
        nop
        nop
        nop

        #
        # Determine size of Bank 0
        #
        li      s0, HAL_ATLAS_MAX_BANKSIZE
0:
        and     t1, s5, BIT7
        bnez    t1, 8f
        sll     s5, 1
        b       0b
        srl     s0, 1
8:

        #
        # Determine if Bank 1 exists
        #
        li      t0, 1
        beq     s4, t0, 8f
        move    s1, zero
        #
        # Determine if Bank 1 is different than Bank 0
        #
        and     t1, s5, 0xFF
        beq     t1, zero, 8f
        move    s1, s0
        #
        # Determine size of Bank 1
        #
        li      s1, HAL_ATLAS_MAX_BANKSIZE
0:
        and     t1, s5, BIT7
        bnez    t1, 8f
        sll     s5, 1
        b       0b
        srl     s1, 1
8:

        #
        # FIXME: We should probably do some validation on the various
        #        memory parameters here at some point.
        #

        #
        # Set the base SDRAM bank configuration value.
        # All other fields are zero, and the proper value is masked
        # in when they are known
        #
        li      s5, HAL_GALILEO_SDRAM_SRAS_TO_SCAS_DELAY_3C | \
                    HAL_GALILEO_SDRAM_WIDTH_64BIT | \
                    HAL_GALILEO_SDRAM_SRAS_PRECHARGE_3C

        #
        # Setup the CASLAT value.
        # Support only CASLAT = 2
        #
        READ_SPD_VALUE HAL_SPD_GET_CAS_LAT, NO_MASK, v0, NO_ERROR_CHECK
        and     t0, v0, 2
        beqz    t0, error
        nop
        ori     s5, HAL_GALILEO_SDRAM_BANK0_CASLAT_2

        #
        # Setup SDRAM device size
        #
        li      t0, SZ_16M
        beq     s6, t0, 8f
        nop
        ori     s5, HAL_GALILEO_SDRAM_BANK0_SZ_64M
8:

        #
        # Setup burst length: Support only 8
        #
        READ_SPD_VALUE HAL_SPD_GET_BURST_LENGTH, NO_MASK, v0, NO_ERROR_CHECK
        and     t0, v0, 8
        beqz    t0, error
        nop

        #
        # Setup Parity.
        # Only support Parity/Noparity.  Don't support ECC.
        #
        READ_SPD_VALUE HAL_SPD_GET_CONFIG_TYPE, NO_MASK, v0, NO_ERROR_CHECK
        li      t0, HAL_SPD_CONFIG_TYPE_PARITY
        beq     t0, v0, 0f
        nop
        li      t0, HAL_SPD_CONFIG_TYPE_ECC
        beq     t0, v0, error
        nop
        b       8f
        li      v1, 0
0:
        ori     s5, HAL_GALILEO_SDRAM_BANK0_PARITY
        li      v1, 1
8:

        #
        # Setup number of device banks
        # Only support 2 or 4 banks
        #
        li      t0, 2
        beq     s2, t0, 8f
        nop
        li      t0, 4
        beq     s2, t0, 0f
        nop
        b       error
        nop
0:
        ori     s5, HAL_GALILEO_SDRAM_NUM_BANKS_4
8:

        #
        # Now actually store the bank config register
        #
        sw      s5, HAL_GALILEO_SDRAM_BANK0_OFFSET(s7)
        sw      s5, HAL_GALILEO_SDRAM_BANK2_OFFSET(s7)

        #
        # Setup the SDRAM configuration register
        # All other fields are zero, and the proper value is masked
        # in when they are known
        #
        li      s5, HAL_GALILEO_SDRAM_DUPLICATE_BANK_ADDR | HAL_GALILEO_SDRAM_BANK_INTERLEAVE_DIS

        #
        # Setup the Refresh Rate
        #
        READ_SPD_VALUE HAL_SPD_GET_REFRESH_RATE, 0x7f, v0, NO_ERROR_CHECK

        li      t0, HAL_SPD_REFRESH_RATE_125
        beq     t0, v0, 8f
        li      t0, HAL_SPD_REFRESH_COUNTER_125

        li      t0, HAL_SPD_REFRESH_RATE_62_5
        beq     t0, v0, 8f
        li      t0, HAL_SPD_REFRESH_COUNTER_62_5

        li      t0, HAL_SPD_REFRESH_RATE_31_3
        beq     t0, v0, 8f
        li      t0, HAL_SPD_REFRESH_COUNTER_31_3

        li      t0, HAL_SPD_REFRESH_RATE_15_625
        beq     t0, v0, 8f
        li      t0, HAL_SPD_REFRESH_COUNTER_15_625

        li      t0, HAL_SPD_REFRESH_RATE_7_8
        beq     t0, v0, 8f
        li      t0, HAL_SPD_REFRESH_COUNTER_7_8

        # Unknown: assume 3.9 microseconds
        li      t0, HAL_SPD_REFRESH_COUNTER_3_9
8:

        or      s5, t0

        #
        # Setup RAM_WIDTH
        #
        beqz    v1, 8f
        nop
        READ_SPD_VALUE HAL_SPD_GET_ERROR_CHECK_WIDTH, 0x7f, v0, NO_ERROR_CHECK
        beq     v0, zero, 8f
        nop
        ori     s5, HAL_GALILEO_SDRAM_CFG_RAM_WIDTH
8:

        #
        # Store the SDRAM configuration register
        #
        sw      s5, HAL_GALILEO_SDRAM_CONFIG_OFFSET(s7)

        #
        # Reset SAA9730 now that we are done with the I2C unit.
        # This allows the generic PCI library to start with a clean
        # slate of devices on the PCI bus.
        #
        li      a0, CYGARC_UNCACHED_ADDRESS(HAL_GALILEO_PCI0_MEM0_BASE)
        li      t0, HAL_SAA9730_SYSRESET_ALL
        sw      t0, HAL_SAA9730_SYSRESET_OFFSET(a0)
        
        #
        # Change the Galileo Base address to HAL_ATLAS_CONTROLLER_BASE
        #
        li      t0, HAL_ATLAS_CONTROLLER_BASE_ISD_CONFIG
        sw      t0, HAL_GALILEO_INT_SPACE_DECODE_OFFSET(s7)
        li      s7, CYGARC_UNCACHED_ADDRESS(HAL_ATLAS_CONTROLLER_BASE)

        #
        # Setup SDRAM Bank 0 Address Decoding
        #
        li      a0, CYGARC_PHYSICAL_ADDRESS(HAL_ATLAS_RAM_BASE)          # Physical bottom of Bank 0
        add     a1, s0, a0
        subu    a1, 1                                                    # Physical top of Bank 0

        srl     t0, a0, HAL_GALILEO_CPU_DECODE_SHIFT                     # Setup SCS[1:0]
        srl     t1, a1, HAL_GALILEO_CPU_DECODE_SHIFT                     #   First level decoding
        sw      t0, HAL_GALILEO_SCS10_LD_OFFSET(s7)                      #   (ie Processor Decode Region)
        sw      t1, HAL_GALILEO_SCS10_HD_OFFSET(s7)                      #

        srl     t0, a0, HAL_GALILEO_DEV_DECODE_SHIFT                     # Setup SCS0
        srl     t1, a1, HAL_GALILEO_DEV_DECODE_SHIFT                     #   Second level decoding
        sw      t0, HAL_GALILEO_SCS0_LD_OFFSET(s7)                       #   (ie Device Sub-decode Region)
        sw      t1, HAL_GALILEO_SCS0_HD_OFFSET(s7)                       #

        #
        # Setup SDRAM Bank 1 Address Decoding
        #
        add     a0, s0, CYGARC_PHYSICAL_ADDRESS(HAL_ATLAS_RAM_BASE)      # Physical bottom of Bank 1
        add     a1, a0, s1
        subu    a1, 1                                                    # Physical top of Bank 1

        srl     t0, a0, HAL_GALILEO_CPU_DECODE_SHIFT                     # Setup SCS[3:2]
        srl     t1, a1, HAL_GALILEO_CPU_DECODE_SHIFT                     #   First level decoding
        sw      t0, HAL_GALILEO_SCS32_LD_OFFSET(s7)                      #   (ie Processor Decode Region)
        sw      t1, HAL_GALILEO_SCS32_HD_OFFSET(s7)                      #

        srl     t0, a0, HAL_GALILEO_DEV_DECODE_SHIFT                     # Setup SCS2
        srl     t1, a1, HAL_GALILEO_DEV_DECODE_SHIFT                     #   Second level decoding
        sw      t0, HAL_GALILEO_SCS2_LD_OFFSET(s7)                       #   (ie Device Sub-decode Region)
        sw      t1, HAL_GALILEO_SCS2_HD_OFFSET(s7)                       #

        #
        # Setup PCI windows
        #
        li      a0, CYGARC_PHYSICAL_ADDRESS(HAL_ATLAS_PCI_MEM0_BASE)
        add     a1, a0, HAL_ATLAS_PCI_MEM0_SIZE
        subu    a1, 1                                                    # Physical top of Bank 1
        srl     t0, a0, HAL_GALILEO_CPU_DECODE_SHIFT
        srl     t1, a1, HAL_GALILEO_CPU_DECODE_SHIFT
        sw      t0, HAL_GALILEO_PCIMEM0_LD_OFFSET(s7)
        sw      t1, HAL_GALILEO_PCIMEM0_HD_OFFSET(s7)
        
        li      a0, CYGARC_PHYSICAL_ADDRESS(HAL_ATLAS_PCI_MEM1_BASE)
        add     a1, a0, HAL_ATLAS_PCI_MEM1_SIZE
        subu    a1, 1                                                    # Physical top of Bank 1
        srl     t0, a0, HAL_GALILEO_CPU_DECODE_SHIFT
        srl     t1, a1, HAL_GALILEO_CPU_DECODE_SHIFT
        sw      t0, HAL_GALILEO_PCIMEM1_LD_OFFSET(s7)
        sw      t1, HAL_GALILEO_PCIMEM1_HD_OFFSET(s7)

        li      a0, CYGARC_PHYSICAL_ADDRESS(HAL_ATLAS_PCI_IO_BASE)
        add     a1, a0, HAL_ATLAS_PCI_IO_SIZE
        subu    a1, 1                                                    # Physical top of Bank 1
        srl     t0, a0, HAL_GALILEO_CPU_DECODE_SHIFT
        srl     t1, a1, HAL_GALILEO_CPU_DECODE_SHIFT
        sw      t0, HAL_GALILEO_PCIIO_LD_OFFSET(s7)
        sw      t1, HAL_GALILEO_PCIIO_HD_OFFSET(s7)

        #
        # Setup FLASH Address Decoding
        #
        li      a0, CYGARC_PHYSICAL_ADDRESS(HAL_ATLAS_FLASH_BASE)        # Physical bottom of Flash Bank
        add     a1, a0, HAL_ATLAS_FLASH_SIZE
        subu    a1, 1                                                    # Physical top of Flash Bank

        srl     t0, a0, HAL_GALILEO_CPU_DECODE_SHIFT                     # Setup CS[2:0]
        srl     t1, a1, HAL_GALILEO_CPU_DECODE_SHIFT                     #   First level decoding
        sw      t0, HAL_GALILEO_CS20_LD_OFFSET(s7)                       #   (ie Processor Decode Region)
        sw      t1, HAL_GALILEO_CS20_HD_OFFSET(s7)                       #

        srl     t0, a0, HAL_GALILEO_DEV_DECODE_SHIFT                     # Setup CS0
        srl     t1, a1, HAL_GALILEO_DEV_DECODE_SHIFT                     #   Second level decoding
        sw      t0, HAL_GALILEO_CS0_LD_OFFSET(s7)                        #   (ie Device Sub-decode Region)
        sw      t1, HAL_GALILEO_CS0_HD_OFFSET(s7)                        #

        #
        #  Now disable all unused decodes
        #  (SCS1, SCS3, PCI1xx, CS1, CS2)
        #
        li      t0, 0xffff
        move    t1, zero
        sw      t0, HAL_GALILEO_SCS1_LD_OFFSET(s7)
        sw      t1, HAL_GALILEO_SCS1_HD_OFFSET(s7)
        sw      t0, HAL_GALILEO_SCS3_LD_OFFSET(s7)
        sw      t1, HAL_GALILEO_SCS3_HD_OFFSET(s7)
        sw      t0, HAL_GALILEO_PCI1IO_LD_OFFSET(s7)
        sw      t1, HAL_GALILEO_PCI1IO_HD_OFFSET(s7)
        sw      t0, HAL_GALILEO_PCI1MEM0_LD_OFFSET(s7)
        sw      t1, HAL_GALILEO_PCI1MEM0_HD_OFFSET(s7)
        sw      t0, HAL_GALILEO_PCI1MEM1_LD_OFFSET(s7)
        sw      t1, HAL_GALILEO_PCI1MEM1_HD_OFFSET(s7)
        sw      t0, HAL_GALILEO_CS1_LD_OFFSET(s7)
        sw      t1, HAL_GALILEO_CS1_HD_OFFSET(s7)
        sw      t0, HAL_GALILEO_CS2_LD_OFFSET(s7)
        sw      t1, HAL_GALILEO_CS2_HD_OFFSET(s7)

noerror:
        move    v0, zero
        add     v1, s0, s1
        move    ra, s8
        jr      ra
        nop

error:
        li      v0, HAL_ATLAS_MEMERROR
        move    ra, s8
        jr      ra
        nop

FUNC_END(hal_atlas_init_sdram)

##
## Read a value from the SDRAM SPD device.
##
## Parameters:   a0 = subaddress
## Returns:      v0 = SPD value read
##
FUNC_START(read_spd_value)
        #
        # Setup a base address register
        #
        li      a1, CYGARC_UNCACHED_ADDRESS(HAL_GALILEO_PCI0_MEM0_BASE)

        #
        # Write the I2C command
        #
        sll     a0, 16
        li      t0, (HAL_SAA9730_I2CTFR_ATTR1_CONT | \
                     ((0xa0 << 24) | HAL_SAA9730_I2CTFR_ATTR2_START) | \
                     ((0xa1 << 8) | HAL_SAA9730_I2CTFR_ATTR0_START))
        or      a0, t0
        sw      a0, HAL_SAA9730_I2CTFR_OFFSET(a1)
1:      lw      t0, HAL_SAA9730_I2CTFR_OFFSET(a1)
        and     t0, 0x1
        bnez    t0, 1b
        nop

        #
        # Read the SPD value
        #
        li      a0, HAL_SAA9730_I2CTFR_ATTR2_STOP
        sw      a0, HAL_SAA9730_I2CTFR_OFFSET(a1)
1:      lw      t0, HAL_SAA9730_I2CTFR_OFFSET(a1)
        and     t0, 0x1
        bnez    t0, 1b
        nop

        #
        # Setup the return value.
        #
        lw      v0, HAL_SAA9730_I2CTFR_OFFSET(a1)
        srl     v0, 24

        jr      ra
        nop
FUNC_END(read_spd_value)
#endif /* defined(CYG_HAL_STARTUP_ROM) || defined(CYG_HAL_STARTUP_ROMRAM) */

##-----------------------------------------------------------------------------
# Interrupt vector tables.
# These tables contain the isr, data and object pointers used to deliver
# interrupts to user code.

        .extern hal_default_isr
        
        .data

        .globl  hal_interrupt_handlers
hal_interrupt_handlers:
        .rept   25
        .long   hal_default_isr
        .endr

        .globl  hal_interrupt_data
hal_interrupt_data:
        .rept   25
        .long   0
        .endr

        .globl  hal_interrupt_objects
hal_interrupt_objects:
        .rept   25
        .long   0
        .endr

        
##-----------------------------------------------------------------------------
## end of platform.S

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.