Subversion Repositories or1k

(T
NȱS

ce.
]
t
D]
[
]

[
edstrrchr_IO_file_stat_IO_do_writefprintfkillbindinet_addr__deregister_frame_infochdirsetsockoptcfsetospeed_IO_padn_IO_getline_info_IO_file_underflow_IO_flush_allstrstr_IO_adjust_columnsignalstrncmp_IO_marker_deltaunlinkstrcasecmp_IO_file_setbufrealloc_IO_getclistensscanf_IO_marker_differencefread_IO_free_backup_area__underflowlocaltime_IO_default_uflowmemsetsrandinet_ntoatcgetattropendir__assert_failtmpnamstrcmpshutdowngetcwdgethostbyname_IO_setb__deregister_framegethostnamesprintffclose_IO_file_doallocate_IO_file_readstderr_IO_peekc_lockedftime_IO_file_openfwrite__xstat_IO_switch_to_get_mode_IO_vfscanf_IO_doallocbuf_IO_seekoff_IO_putc_IO_stdin_used_IO_seekpos_IO_file_xsputn__libc_start_main_IO_initstrchrfputsexecvpsetsid_IO_file_attachclosedir_IO_list_allsched_yield_IO_file_fopen_IO_un_link__register_frame_info_table_IO_file_write_IO_default_pbackfailtcsetattrmkdir__register_frame_info_IO_2_1_stderr__IO_seekmarkfreesigprocmask__dso_handle__cxa_atexit__ti16__func_type_info__ti9bad_alloc__tiSc__ti16__attr_type_info__vt_17__class_type_info_._8bad_cast__tic__ti10bad_typeid__vt_9bad_alloc__vt_19__builtin_type_info__vt_16__func_type_info__ti8bad_cast__vt_9type_info__tif__tiUl__tiUx__tib__vt_16__attr_type_info__vt_8bad_cast__tf16__user_type_info__vt_16__user_type_info__terminate_func__new_handler__ti16__ptmf_type_info__ti17__array_type_info__tf16__attr_type_info__tf16__func_type_info__tf9type_info__ti9type_info__vt_17__array_type_info__tis__vt_10bad_typeid__tid__cplus_type_matcher__ti19__pointer_type_info__vt_16__ptmf_type_info__ti13bad_exception__ti9exception__tii__ti16__user_type_info__tiUi__tiUc__vt_13bad_exception__ti16__ptmd_type_info_._13bad_exception__tiUs__vt_19__pointer_type_info__til_._10bad_typeid__tiw__ti14__si_type_info__vt_9exception__vt_14__si_type_info_._9bad_alloc__vt_16__ptmd_type_info__tix__tf19__pointer_type_info__ti17__class_type_info__ti19__builtin_OX
TX
XX
[X
\X
`X
bX
dX
g X
h$X
l(X
n,X
r0X
s4X
w8X
{<X

@U
DU
HU
LU
PU
      TU

XU
\U

`U
dU
hU
lU
pU
tU
xU
|U
EV
FV
IV
JV
MV
NV
PV
QV
R V
S$V
U(V
V,V
Y0V
Z4V
]8V
^<V
_@V
aDV
eHV
fLV
iPV
jTV
kXV
m\V
o`V
pdV
qhV
tlV
upV
vtV
xxV
y|V

Y
;|Z
Properties: unrecognized attribute %s in command string
Failed to set '%s' to double value '%f'
Failed to set '%s' to string value '%s'
Failed to get a pty
Master pty %s (fd %d) slave pty %s (fd %d)
Failed to create process - %s
*** Failed to change directory to %s
*** Process %d created "%s"
PATH=%sexec error - %s
Closing fd %d
Forked to create process %s - process id <%d>
Failed to create process for %s
CSubprocess::Kill pid %d recurse=%d
rps -l%d %s %d %d %d %d %d %d %s %d %s %s %d:%d:%dFailed to run ps -l
!!! Circularly linked process list at index %d
%d: %s ppid=%4d
id=%dout of memorypos2 > len2pos > lenlen - n1 > max_size () - n2pos > length ()6String11CSubprocesst12basic_string3ZcZt18string_char_traits1ZcZt24__default_alloc_template2b1i0bad_allocchar * String::GetBuffer(unsigned int = 0)../../Utils/common/Collections.cpp__null==m_pszBufvoid String::ReleaseBuffer()m_pszBufint String::Chop(StringArray &, char = ' ', bool = true) const'\0'!=cSepout of memorypos2 > len2pos > lenlen - n1 > max_size () - n2pos > length ()6Stringt12basic_string3ZcZt18string_char_traits1ZcZt24__default_alloc_template2b1i0bad_allocRunThread %s
RunThread: - non-blocking call (new thread=%x)
RunThread(): pthread_create failed - %s
RunThread(): pthread_detach failed - %s
Thread %x [%s] created
Exception caught in SThreadFunc!!!
Thread %x [%s] terminated
CeCosThreadUtils::CS::~CS()../../Utils/common/eCosThreadUtils.cppInCriticalSection()m_nCriticalSectionLock>=0out of memorypos2 > len2pos > lenlen - n1 > max_size () - n2pos > length ()6StringQ216CeCosThreadUtils2CSt12basic_string3ZcZt18string_char_traits1ZcZt24__default_alloc_template2b1i0bad_allocSuMTuWThFSaaOutput -> %s (%08x)
Failed to reopen %s
%s %s%c%3x %s %02d:%02d:%02d%cout of memorypos2 > len2pos > lenlen - n1 > max_size () - n2pos > length ()6Stringt12basic_string3ZcZt18string_char_traits1ZcZt24__default_alloc_template2b1i0bad_allocFailed to open port %s
Failed to apply settings.
11.52Applysettings baud=%d bParity=%d stopbits=%s databits=%d
Changing configuration...
Error: tcgetattr
 0Error: tcsetattr
Error: termios verify failed
Done.
Read failed: %d
Select failed: %d
out of memorypos2 > len2pos > lenlen - n1 > max_size () - n2pos > length ()6String11CeCosSerialt12basic_string3ZcZt18string_char_traits1ZcZt24__default_alloc_template2b1i0bad_allocCreate socket instance %08x
Connection accepted from %s - socket %d
Couldn't create socket
Created socket %d listening on port %d
Couldn't bind socket on port %d
socket error on listen - port %d
Failed to set socket options on socket %d
Connect: %s timeout=%d
Could not create socket [%s]
Created socket %d connected to %s
Connect() : connecting to server
attempt timed out after %d secondsCould not connect to %s - %s
sendingreceiving%d/%d mSec timeout on socket %d %s %s - processed %d/%d bytes
Error on socket %d %s %s - %s
Delete socket instance %08x
Closing socket %d
!!! Exception caught in CeCosSocket::CloseSocket!!!
Failed to set socket options socket %d - %s
Read operation timed outRead operation after socket closedPeek: err=%d %s
ConnectSocketToSerial: connected
Serial:%d
Failed to write to socket
Socket:%d
Failed to write to serial
SSRead serial error - %s
SSRead socket error - %s
SSRead stopped
!!! ConnectSocketToSerial exception caught!!!
!!! ConnectSocketToSocket exception caught!!!
ConnectSocketToSerial : socket %d <--> %s
Couldn't open port %s
ConnectSocketToSerial: waiting for connection...
ConnectSocketToSerial - couldn't accept
ConnectSocketToSerial : done
ConnectSocketToSerial !!!exception handled!!!
%u.%u.%u.%u%s:%d%[^:]:%dpos2 > len2pos > lenlen - n1 > max_size () - n2pos > length ()n > max_size ()out of memory6Stringt12basic_string3ZcZt18string_char_traits1ZcZt24__default_alloc_template2b1i0bad_allocUnknown(%d)UNKNOWN%%%% %s.Failed to open dir
RESOURCESERVERIllegal host:port '%s' defined in RESOURCESERVER environment variable
-v-V-oFailed to direct output to %s
-OFailed to direct error to %s
-rIllegal host:port '%s'
-version09:46:24May  9 20032.0%s %s (%s %s)
Connected to resource server %s
Can't load from resource server %s
You must specify a resource server using either the -r switch or by setting the RESOURCESERVER environment variable
        -o file      : send standard output to named file
        -O file      : send standard error  to named file
        -r host:port : use this host:port as resourceserver [or set the RESOURCESERVER environment variable]
        -v           : vebose mode - trace to stderr
        -V           : very verbose mode - trace to stderr
        -version     : print a version string
HOMEout of memorypos2 > len2pos > lenlen - n1 > max_size () - n2pos > length ()6Stringt12basic_string3ZcZt18string_char_traits1ZcZt24__default_alloc_template2b1i0bad_allocUnknown(%d)UNKNOWN%%%% %s@@@ Created resource %08x %s
@@@ Destroy resource %08x %s
Failed to change to %s from %s
BaudBoardIdDateEmailHostPortLockedOriginatorReasonResetSerialTargetUserFailed to write to socket
Recv "%s"
resource countSend "%s"
replyFrom command string %s
GetResource: no candidates available
Acquired %s
%10s %20s %8s [RL]port(%s,%d) %srsh %s x10reset %s
%s-%dout of memorypos2 > len2pos > lenlen - n1 > max_size () - n2pos > length ()6StringQ29CeCosTest19ExecutionParametersQ213CTestResource23CTestResourceProperties13CTestResourcet12basic_string3ZcZt18string_char_traits1ZcZt24__default_alloc_template2b1i0bad_allocReading board startup output from %s with timeout of %d seconds...No response from board
%sReset target using %s %s port=%s(%d) read timeout=%d delay=%d expect()Opening %s
Failed to open %s - %sFailed to open comms port %s - %sSSuckThreadFunc[not checking output]-Control=%s -Action=%d -Delay=%dReset control codesResponseReset server reports error '%s'Failed to read response from reset server %s - %sFailed to contact reset server %s - %sReset output validReset output INVALIDconst TCHAR * CResetAttributes::GetIdAndArg(const char *, String &, String &)../common/ResetAttributes.cppfalseToo many right parenthesesToo many left parenthesesInvalid reset stringexpectportoffonon_offoff_onFailed to specify reset host:portdelayCeCosThreadUtils::Sleep %d
Unrecognized command '%s'Target reset not verified%s >>> %s
PATH%%%% Delete test instance %08x
~CeCosTest(): EnterCritical and decrease instance count
%%%% Destroy instance.  Instance count:=%d
RunRemote
RemoteThreadFunc()
file sizeSending [%d bytes]
rbFailed to open %s - %s
Failure reading %s - %s
executableFailure sending %s - %s
done [%d bytes sent]
Failed to transmit %s - %d/%d bytes sent
done
Failed to receive result from remote server
Terminating ackRemoteThreadFunc - exiting
RunLocal %s
Cannot run - %s is not a file
Cannot run a %s test
LocalThreadFunc - target=%s
LocalThreadFunc():Trying to acquire a port
Waiting for a port

Port acquired!
Estimated download time %d sec (%d bytes @ %d bytes/sec [%d baud])
Active timeout=%d download timeout=%d
%eRunLocal - exiting
execution parametersready statusCould not establish matches
ConnectForExecution: choices are:
       %s
ConnectForExecution: chosen %s
Connect: %s says %s %s
%s %s %sConnected to %s
Warning - could not connect to any test servers:
    %s
No servers available to execute %s test:
Retry in %d seconds...
ConnectForExecution : cancelled
Status <- %s
%04d-%02d-%02d %02d:%02d:%02d %15s %16s %30s %11s %dk/%dk D=%u.%u/%u.%u Total=%u.%u E=%u.%u/%u.%u "%s":0RunAgent : could not read execution parameters
Execution parameters: %s
serving %sBad target value %s read from client
Cannot run a %s test from this server
RunAgent : %s request tActive=%d tDownload=%d Target=%s Reply status=%s %s
Couldn't find a socket to bind to for RDI
SAcceptThreadFunc!!! Exception caught in RunAgent()
Couldn't open port %s
ConnectSocketToSerial: waiting for connection...
ConnectSocketToSerial - couldn't accept: %s
ConnectSocketToSerialThread - illegal connection attempted from %s
!!! ConnectSocketToSerial exception caught: %s!!!
!!! ConnectSocketToSerial exception caught!!!
ConnectSocketToSerial : done
%s-%s-%dAcceptThreadFunc file size=%d reading...
wbCould not create %s - %s
Write error on %s - %s
Accept - done reading [%d bytes read, %d bytes written]
Failed to create %s correctly [%d/%d bytes written]
No reset possible
Resetting target using %sSend Target Ready indicator=%d
target ready indicatorSending %s
Serial nameTerminating ack=%d
Using %s
host:portSConnectSocketToSerialThreadFuncSession terminated by request of client (%s)
Session terminated by socket error - %s
Waiting for ConnectSocketToSerial thread to terminate...
%sresult
*** Timeout - download time %u.%u exceeds limit of %u.%u

*** Timeout - inactive time %u.%u exceeds limit of %u.%u
Don't know how to get sizes of this platform type
GetSizes %s
%s does not exist
No prefix to run a size program
%s-size %sFailed to run "%s" - %s
 %d %dGetSizes %s rc=%d file size=%d stripped size=%d
Illegal host:port '%s'
Waiting to connect to %s...
Waiting to connect to a server...
Connected to %s - waiting for target reset
Use target remote %s
-gdbfork failed
Error invoking %s - %s
Inferior terminated
Send Target Ready indicator=2
Send %s
output so far
>>>> Infra FAIL
*** too much output ***
>>>>
loadGDB:runcontEXEC:%%%% Failed to create process '%s'
PIPE:%%%% Two PIPE commands are a no-no
TIMEOUT:%%%% Illegal timeout specified: %s
RunGDB()

%%%% Pipe process returned rc=%d
%%%% Pipe process would not complete
!!! Exception caught in RunInferior()
Exiting RunInferior()
FAIL:EXIT:NOTAPPLICABLE:PASS:DriveInferior: saw '%s'
cyg_assert_fail (SIGBUSSIGSEGVSIGILLSIGFPESIGSYSSIGTRAPsignal %shandle %s nostopEXPECT:EXPECT:<> failure - expected '%s' saw '%s'
%s %s %d %d %d %d %d %d %d %d %s %s %s%s %s %d %d %d %d %d %d %d %dTarget readyFailed to read target ready indicator from server - %s
Failed to reset targetInstructed to use %s
Failed to read host:port - %s
outputFailed to read output
%%%% Unterminated directive: %s%dout of memorypos2 > len2pos > lenlen - n1 > max_size () - n2pos > length ()6StringQ29CeCosTest19ExecutionParameters9CeCosTestPCct12basic_string3ZcZt18string_char_traits1ZcZt24__default_alloc_template2b1i0Ccbad_allocplatformprefixcommandsinferiorpromptServerSideGdbCeCosTestPlatform::LoadFromDir %s
Illegal platform specification in %s%c%s
Failed to change to %s from %s
CeCosTestPlatform::Load
.eCosPlatformsFailed to initialize any targets
Warning: duplicate target info %s
out of memorypos2 > len2pos > lenlen - n1 > max_size () - n2pos > length ()6StringQ217CeCosTestPlatform27CeCosTestPlatformPropertiest12basic_string3ZcZt18string_char_traits1ZcZt24__default_alloc_template2b1i0bad_allocUnknown(%d)UNKNOWN%%%% %s[d] TF:%04x %02x .. '%c'
%sWriting %d bytes to serial failed
serial write failed0123456789abcdefSending bytes for %p-%p
Timeout in putpkt_binary
+Bad CRC
Got junk..%02x
Download filter caught string: %s
Download filter caught unknown exception
Extra bytes after command packet!?!Received too long command. Ignoring it!
Got command %s
len %d, dl %08x, start %08x, packet_size %d
@$D#44-?out of memorypos2 > len2pos > lenlen - n1 > max_size () - n2pos > length ()6StringPCct12basic_string3ZcZt18string_char_traits1ZcZt24__default_alloc_template2b1i0Ccbad_allocUnknown(%d)UNKNOWN%%%% %sT:H:%04x > %02x .. '%c'
%sout of memorypos2 > len2pos > lenlen - n1 > max_size () - n2pos > length ()bad_allocUnknown(%d)UNKNOWN%%%% %s0123456789abcdef[f] TF:%04x %02x .. '%c'
%sWriting %d bytes to serial failed
serial write failedReading %d bytes from serial failed (read %d).
serial read failedFAIL:<target crashed>
**** Detected $ -- resuming as null filter ****
Data received %d bytes (of %d) from target:
<end>
FAIL:<target timed out>
**** Timed out while reading -- resuming as null filter
$X00#b8$X00#b8EROKSCMD_ChangeConfig: serial read failureDConfig change succeeded.
R**** Timed out while changing config
Parsed Config xonxoff_rx=%d,tx=%d, rtscts_rx=%d,tx=%d, dsrdtr_rx=%d,tx=%d
%d!DONEData received from target:
Receiving junk instead of DONE:
Could not allocate %d byte buffer for data!
data_out malloc faileddata_in malloc failedFinished write, waiting for target echo.
Data seen:
Data expected:
%d loops to go
Failed at byte %d
Unknown mode. Ignoring.
Bogus command (%s) Ignoring.
Dispatching command %s.
CONFIGDEFCONFIGBINARYTEXTPINGUnknown command '%s'.
Command %s completed.
Could not allocate stored trace bufferCould not allocate unread buffer!Received too long command. Ignoring it!
Not enough room for $-messageout of memorypos2 > len2pos > lenlen - n1 > max_size () - n2pos > length ()6StringPCcP14filter_abort_tt12basic_string3ZcZt18string_char_traits1ZcZt24__default_alloc_template2b1i0Cc14filter_abort_tbad_allocUnknown(%d)UNKNOWN%%%% %sno_gdb, listening on %s
Couldn't open port %s
Serial read failed (%d)
Unrecognized switch %s
Invalid port %s
Couldn't access socket.
listen failedMonitor mode - will not interact with data streams...
Caught filter crash: %s
/usr/unsupported/bin/x10cli x10 5000 %c %cser_filterUsage: %s [-c -S -0 -Xab] TcpIPport SerialPort BaudRate
 or:   %s -n [-c -S -0 -Xab] SerialPort BaudRate
 Switches:
 -f: Enable filter output tracing.
 -S: Output data read from serial line.
 -c: Output data on console instead of via GDB.
 -m: Work only as a monitor filter. Implies -c.
 -n: No GDB.
 -0: Use null filter.
 -Xab: Reset X-10 Port 'a b' when TCP connection breaks
`7ostream7istreamH\
@X\
@8iostreamH\
@22_IO_istream_withassignX\
bad_alloc9bad_allocU
....%...G.T.
.
.
..
...    ....
..+.u...   ....
..?....
....       ..@.
.......        ..+...
...
....     ...J...
....   ..
.."
.;.n. *...$
..U..
..#. ".0. 
0v

Vl

0U
: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.95.3 20010315 (release)GCC: (GNU) 2.96 20000731 (Red Hat Linux 7.3 2.96-110)
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01
01.01