URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [gdb-5.0/] [gdb/] [infcmd.c] - Rev 1765
Compare with Previous | Blame | View Log
/* Memory-access and commands for "inferior" process, for GDB. Copyright 1986, 87, 88, 89, 91, 92, 95, 96, 1998, 1999 Free Software Foundation, Inc. This file is part of GDB. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include "defs.h" #include <signal.h> #include "gdb_string.h" #include "symtab.h" #include "gdbtypes.h" #include "frame.h" #include "inferior.h" #include "environ.h" #include "value.h" #include "gdbcmd.h" #include "gdbcore.h" #include "target.h" #include "language.h" #include "symfile.h" #include "objfiles.h" #ifdef UI_OUT #include "ui-out.h" #endif #include "event-top.h" #include "parser-defs.h" /* Functions exported for general use: */ void nofp_registers_info PARAMS ((char *, int)); void all_registers_info PARAMS ((char *, int)); void registers_info PARAMS ((char *, int)); /* Local functions: */ void continue_command PARAMS ((char *, int)); static void print_return_value (int struct_return, struct type *value_type); static void finish_command_continuation PARAMS ((struct continuation_arg *)); static void until_next_command PARAMS ((int)); static void until_command PARAMS ((char *, int)); static void path_info PARAMS ((char *, int)); static void path_command PARAMS ((char *, int)); static void unset_command PARAMS ((char *, int)); static void float_info PARAMS ((char *, int)); static void detach_command PARAMS ((char *, int)); static void interrupt_target_command (char *args, int from_tty); #if !defined (DO_REGISTERS_INFO) static void do_registers_info PARAMS ((int, int)); #endif static void unset_environment_command PARAMS ((char *, int)); static void set_environment_command PARAMS ((char *, int)); static void environment_info PARAMS ((char *, int)); static void program_info PARAMS ((char *, int)); static void finish_command PARAMS ((char *, int)); static void signal_command PARAMS ((char *, int)); static void jump_command PARAMS ((char *, int)); static void step_1 PARAMS ((int, int, char *)); static void step_once (int skip_subroutines, int single_inst, int count); static void step_1_continuation (struct continuation_arg *arg); void nexti_command PARAMS ((char *, int)); void stepi_command PARAMS ((char *, int)); static void next_command PARAMS ((char *, int)); static void step_command PARAMS ((char *, int)); static void run_command PARAMS ((char *, int)); static void run_no_args_command PARAMS ((char *args, int from_tty)); static void go_command PARAMS ((char *line_no, int from_tty)); static int strip_bg_char PARAMS ((char **)); void _initialize_infcmd PARAMS ((void)); #define GO_USAGE "Usage: go <location>\n" static void breakpoint_auto_delete_contents PARAMS ((PTR)); #define ERROR_NO_INFERIOR \ if (!target_has_execution) error ("The program is not being run."); /* String containing arguments to give to the program, separated by spaces. Empty string (pointer to '\0') means no args. */ static char *inferior_args; /* File name for default use for standard in/out in the inferior. */ char *inferior_io_terminal; /* Pid of our debugged inferior, or 0 if no inferior now. Since various parts of infrun.c test this to see whether there is a program being debugged it should be nonzero (currently 3 is used) for remote debugging. */ int inferior_pid; /* Last signal that the inferior received (why it stopped). */ enum target_signal stop_signal; /* Address at which inferior stopped. */ CORE_ADDR stop_pc; /* Chain containing status of breakpoint(s) that we have stopped at. */ bpstat stop_bpstat; /* Flag indicating that a command has proceeded the inferior past the current breakpoint. */ int breakpoint_proceeded; /* Nonzero if stopped due to a step command. */ int stop_step; /* Nonzero if stopped due to completion of a stack dummy routine. */ int stop_stack_dummy; /* Nonzero if stopped due to a random (unexpected) signal in inferior process. */ int stopped_by_random_signal; /* Range to single step within. If this is nonzero, respond to a single-step signal by continuing to step if the pc is in this range. */ CORE_ADDR step_range_start; /* Inclusive */ CORE_ADDR step_range_end; /* Exclusive */ /* Stack frame address as of when stepping command was issued. This is how we know when we step into a subroutine call, and how to set the frame for the breakpoint used to step out. */ CORE_ADDR step_frame_address; /* Our notion of the current stack pointer. */ CORE_ADDR step_sp; /* 1 means step over all subroutine calls. 0 means don't step over calls (used by stepi). -1 means step over calls to undebuggable functions. */ int step_over_calls; /* If stepping, nonzero means step count is > 1 so don't print frame next time inferior stops if it stops due to stepping. */ int step_multi; /* Environment to use for running inferior, in format described in environ.h. */ struct environ *inferior_environ; /* This function detects whether or not a '&' character (indicating background execution) has been added as *the last* of the arguments ARGS of a command. If it has, it removes it and returns 1. Otherwise it does nothing and returns 0. */ static int strip_bg_char (args) char **args; { char *p = NULL; p = strchr (*args, '&'); if (p) { if (p == (*args + strlen (*args) - 1)) { if (strlen (*args) > 1) { do p--; while (*p == ' ' || *p == '\t'); *(p + 1) = '\0'; } else *args = 0; return 1; } } return 0; } /* ARGSUSED */ void tty_command (file, from_tty) char *file; int from_tty; { if (file == 0) error_no_arg ("terminal name for running target process"); inferior_io_terminal = savestring (file, strlen (file)); } static void run_command (args, from_tty) char *args; int from_tty; { char *exec_file; dont_repeat (); if (inferior_pid != 0 && target_has_execution) { if (from_tty && !query ("The program being debugged has been started already.\n\ Start it from the beginning? ")) error ("Program not restarted."); target_kill (); #if defined(SOLIB_RESTART) SOLIB_RESTART (); #endif init_wait_for_inferior (); } clear_breakpoint_hit_counts (); exec_file = (char *) get_exec_file (0); /* Purge old solib objfiles. */ objfile_purge_solibs (); do_run_cleanups (NULL); /* The exec file is re-read every time we do a generic_mourn_inferior, so we just have to worry about the symbol file. */ reread_symbols (); /* We keep symbols from add-symbol-file, on the grounds that the user might want to add some symbols before running the program (right?). But sometimes (dynamic loading where the user manually introduces the new symbols with add-symbol-file), the code which the symbols describe does not persist between runs. Currently the user has to manually nuke all symbols between runs if they want them to go away (PR 2207). This is probably reasonable. */ if (!args) { if (event_loop_p && target_can_async_p ()) async_disable_stdin (); } else { char *cmd; int async_exec = strip_bg_char (&args); /* If we get a request for running in the bg but the target doesn't support it, error out. */ if (event_loop_p && async_exec && !target_can_async_p ()) error ("Asynchronous execution not supported on this target."); /* If we don't get a request of running in the bg, then we need to simulate synchronous (fg) execution. */ if (event_loop_p && !async_exec && target_can_async_p ()) { /* Simulate synchronous execution */ async_disable_stdin (); } /* If there were other args, beside '&', process them. */ if (args) { cmd = concat ("set args ", args, NULL); make_cleanup (free, cmd); execute_command (cmd, from_tty); } } if (from_tty) { #ifdef UI_OUT ui_out_field_string (uiout, NULL, "Starting program"); ui_out_text (uiout, ": "); if (exec_file) ui_out_field_string (uiout, "execfile", exec_file); ui_out_spaces (uiout, 1); ui_out_field_string (uiout, "infargs", inferior_args); ui_out_text (uiout, "\n"); ui_out_flush (uiout); #else puts_filtered ("Starting program: "); if (exec_file) puts_filtered (exec_file); puts_filtered (" "); puts_filtered (inferior_args); puts_filtered ("\n"); gdb_flush (gdb_stdout); #endif } target_create_inferior (exec_file, inferior_args, environ_vector (inferior_environ)); } static void run_no_args_command (args, from_tty) char *args; int from_tty; { execute_command ("set args", from_tty); run_command ((char *) NULL, from_tty); } void continue_command (proc_count_exp, from_tty) char *proc_count_exp; int from_tty; { int async_exec = 0; ERROR_NO_INFERIOR; /* Find out whether we must run in the background. */ if (proc_count_exp != NULL) async_exec = strip_bg_char (&proc_count_exp); /* If we must run in the background, but the target can't do it, error out. */ if (event_loop_p && async_exec && !target_can_async_p ()) error ("Asynchronous execution not supported on this target."); /* If we are not asked to run in the bg, then prepare to run in the foreground, synchronously. */ if (event_loop_p && !async_exec && target_can_async_p ()) { /* Simulate synchronous execution */ async_disable_stdin (); } /* If have argument (besides '&'), set proceed count of breakpoint we stopped at. */ if (proc_count_exp != NULL) { bpstat bs = stop_bpstat; int num = bpstat_num (&bs); if (num == 0 && from_tty) { printf_filtered ("Not stopped at any breakpoint; argument ignored.\n"); } while (num != 0) { set_ignore_count (num, parse_and_eval_address (proc_count_exp) - 1, from_tty); /* set_ignore_count prints a message ending with a period. So print two spaces before "Continuing.". */ if (from_tty) printf_filtered (" "); num = bpstat_num (&bs); } } if (from_tty) printf_filtered ("Continuing.\n"); clear_proceed_status (); proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0); } /* Step until outside of current statement. */ /* ARGSUSED */ static void step_command (count_string, from_tty) char *count_string; int from_tty; { step_1 (0, 0, count_string); } /* Likewise, but skip over subroutine calls as if single instructions. */ /* ARGSUSED */ static void next_command (count_string, from_tty) char *count_string; int from_tty; { step_1 (1, 0, count_string); } /* Likewise, but step only one instruction. */ /* ARGSUSED */ void stepi_command (count_string, from_tty) char *count_string; int from_tty; { step_1 (0, 1, count_string); } /* ARGSUSED */ void nexti_command (count_string, from_tty) char *count_string; int from_tty; { step_1 (1, 1, count_string); } static void step_1 (skip_subroutines, single_inst, count_string) int skip_subroutines; int single_inst; char *count_string; { register int count = 1; struct frame_info *frame; struct cleanup *cleanups = 0; int async_exec = 0; ERROR_NO_INFERIOR; if (count_string) async_exec = strip_bg_char (&count_string); /* If we get a request for running in the bg but the target doesn't support it, error out. */ if (event_loop_p && async_exec && !target_can_async_p ()) error ("Asynchronous execution not supported on this target."); /* If we don't get a request of running in the bg, then we need to simulate synchronous (fg) execution. */ if (event_loop_p && !async_exec && target_can_async_p ()) { /* Simulate synchronous execution */ async_disable_stdin (); } count = count_string ? parse_and_eval_address (count_string) : 1; if (!single_inst || skip_subroutines) /* leave si command alone */ { enable_longjmp_breakpoint (); if (!event_loop_p || !target_can_async_p ()) cleanups = make_cleanup ((make_cleanup_func) disable_longjmp_breakpoint, 0); else make_exec_cleanup ((make_cleanup_func) disable_longjmp_breakpoint, 0); } /* In synchronous case, all is well, just use the regular for loop. */ if (!event_loop_p || !target_can_async_p ()) { for (; count > 0; count--) { clear_proceed_status (); frame = get_current_frame (); if (!frame) /* Avoid coredump here. Why tho? */ error ("No current frame"); step_frame_address = FRAME_FP (frame); step_sp = read_sp (); if (!single_inst) { find_pc_line_pc_range (stop_pc, &step_range_start, &step_range_end); if (step_range_end == 0) { char *name; if (find_pc_partial_function (stop_pc, &name, &step_range_start, &step_range_end) == 0) error ("Cannot find bounds of current function"); target_terminal_ours (); printf_filtered ("\ Single stepping until exit from function %s, \n\ which has no line number information.\n", name); } } else { /* Say we are stepping, but stop after one insn whatever it does. */ step_range_start = step_range_end = 1; if (!skip_subroutines) /* It is stepi. Don't step over function calls, not even to functions lacking line numbers. */ step_over_calls = 0; } if (skip_subroutines) step_over_calls = 1; step_multi = (count > 1); proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1); if (!stop_step) break; /* FIXME: On nexti, this may have already been done (when we hit the step resume break, I think). Probably this should be moved to wait_for_inferior (near the top). */ #if defined (SHIFT_INST_REGS) SHIFT_INST_REGS (); #endif } if (!single_inst || skip_subroutines) do_cleanups (cleanups); return; } /* In case of asynchronous target things get complicated, do only one step for now, before returning control to the event loop. Let the continuation figure out how many other steps we need to do, and handle them one at the time, through step_once(). */ else { if (event_loop_p && target_can_async_p ()) step_once (skip_subroutines, single_inst, count); } } /* Called after we are done with one step operation, to check whether we need to step again, before we print the prompt and return control to the user. If count is > 1, we will need to do one more call to proceed(), via step_once(). Basically it is like step_once and step_1_continuation are co-recursive. */ static void step_1_continuation (arg) struct continuation_arg *arg; { int count; int skip_subroutines; int single_inst; skip_subroutines = arg->data.integer; single_inst = arg->next->data.integer; count = arg->next->next->data.integer; if (stop_step) { /* FIXME: On nexti, this may have already been done (when we hit the step resume break, I think). Probably this should be moved to wait_for_inferior (near the top). */ #if defined (SHIFT_INST_REGS) SHIFT_INST_REGS (); #endif step_once (skip_subroutines, single_inst, count - 1); } else if (!single_inst || skip_subroutines) do_exec_cleanups (ALL_CLEANUPS); } /* Do just one step operation. If count >1 we will have to set up a continuation to be done after the target stops (after this one step). This is useful to implement the 'step n' kind of commands, in case of asynchronous targets. We had to split step_1 into two parts, one to be done before proceed() and one afterwards. This function is called in case of step n with n>1, after the first step operation has been completed.*/ static void step_once (int skip_subroutines, int single_inst, int count) { struct continuation_arg *arg1; struct continuation_arg *arg2; struct continuation_arg *arg3; struct frame_info *frame; if (count > 0) { clear_proceed_status (); frame = get_current_frame (); if (!frame) /* Avoid coredump here. Why tho? */ error ("No current frame"); step_frame_address = FRAME_FP (frame); step_sp = read_sp (); if (!single_inst) { find_pc_line_pc_range (stop_pc, &step_range_start, &step_range_end); if (step_range_end == 0) { char *name; if (find_pc_partial_function (stop_pc, &name, &step_range_start, &step_range_end) == 0) error ("Cannot find bounds of current function"); target_terminal_ours (); printf_filtered ("\ Single stepping until exit from function %s, \n\ which has no line number information.\n", name); } } else { /* Say we are stepping, but stop after one insn whatever it does. */ step_range_start = step_range_end = 1; if (!skip_subroutines) /* It is stepi. Don't step over function calls, not even to functions lacking line numbers. */ step_over_calls = 0; } if (skip_subroutines) step_over_calls = 1; step_multi = (count > 1); arg1 = (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg)); arg2 = (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg)); arg3 = (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg)); arg1->next = arg2; arg1->data.integer = skip_subroutines; arg2->next = arg3; arg2->data.integer = single_inst; arg3->next = NULL; arg3->data.integer = count; add_intermediate_continuation (step_1_continuation, arg1); proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1); } } /* Continue program at specified address. */ static void jump_command (arg, from_tty) char *arg; int from_tty; { register CORE_ADDR addr; struct symtabs_and_lines sals; struct symtab_and_line sal; struct symbol *fn; struct symbol *sfn; int async_exec = 0; ERROR_NO_INFERIOR; /* Find out whether we must run in the background. */ if (arg != NULL) async_exec = strip_bg_char (&arg); /* If we must run in the background, but the target can't do it, error out. */ if (event_loop_p && async_exec && !target_can_async_p ()) error ("Asynchronous execution not supported on this target."); /* If we are not asked to run in the bg, then prepare to run in the foreground, synchronously. */ if (event_loop_p && !async_exec && target_can_async_p ()) { /* Simulate synchronous execution */ async_disable_stdin (); } if (!arg) error_no_arg ("starting address"); sals = decode_line_spec_1 (arg, 1); if (sals.nelts != 1) { error ("Unreasonable jump request"); } sal = sals.sals[0]; free ((PTR) sals.sals); if (sal.symtab == 0 && sal.pc == 0) error ("No source file has been specified."); resolve_sal_pc (&sal); /* May error out */ /* See if we are trying to jump to another function. */ fn = get_frame_function (get_current_frame ()); sfn = find_pc_function (sal.pc); if (fn != NULL && sfn != fn) { if (!query ("Line %d is not in `%s'. Jump anyway? ", sal.line, SYMBOL_SOURCE_NAME (fn))) { error ("Not confirmed."); /* NOTREACHED */ } } if (sfn != NULL) { fixup_symbol_section (sfn, 0); if (section_is_overlay (SYMBOL_BFD_SECTION (sfn)) && !section_is_mapped (SYMBOL_BFD_SECTION (sfn))) { if (!query ("WARNING!!! Destination is in unmapped overlay! Jump anyway? ")) { error ("Not confirmed."); /* NOTREACHED */ } } } addr = sal.pc; if (from_tty) { printf_filtered ("Continuing at "); print_address_numeric (addr, 1, gdb_stdout); printf_filtered (".\n"); } clear_proceed_status (); proceed (addr, TARGET_SIGNAL_0, 0); } /* Go to line or address in current procedure */ static void go_command (line_no, from_tty) char *line_no; int from_tty; { if (line_no == (char *) NULL || !*line_no) printf_filtered (GO_USAGE); else { tbreak_command (line_no, from_tty); jump_command (line_no, from_tty); } } /* Continue program giving it specified signal. */ static void signal_command (signum_exp, from_tty) char *signum_exp; int from_tty; { enum target_signal oursig; dont_repeat (); /* Too dangerous. */ ERROR_NO_INFERIOR; if (!signum_exp) error_no_arg ("signal number"); /* It would be even slicker to make signal names be valid expressions, (the type could be "enum $signal" or some such), then the user could assign them to convenience variables. */ oursig = target_signal_from_name (signum_exp); if (oursig == TARGET_SIGNAL_UNKNOWN) { /* No, try numeric. */ int num = parse_and_eval_address (signum_exp); if (num == 0) oursig = TARGET_SIGNAL_0; else oursig = target_signal_from_command (num); } if (from_tty) { if (oursig == TARGET_SIGNAL_0) printf_filtered ("Continuing with no signal.\n"); else printf_filtered ("Continuing with signal %s.\n", target_signal_to_name (oursig)); } clear_proceed_status (); /* "signal 0" should not get stuck if we are stopped at a breakpoint. FIXME: Neither should "signal foo" but when I tried passing (CORE_ADDR)-1 unconditionally I got a testsuite failure which I haven't tried to track down yet. */ proceed (oursig == TARGET_SIGNAL_0 ? (CORE_ADDR) -1 : stop_pc, oursig, 0); } /* Call breakpoint_auto_delete on the current contents of the bpstat pointed to by arg (which is really a bpstat *). */ static void breakpoint_auto_delete_contents (arg) PTR arg; { breakpoint_auto_delete (*(bpstat *) arg); } /* Execute a "stack dummy", a piece of code stored in the stack by the debugger to be executed in the inferior. To call: first, do PUSH_DUMMY_FRAME. Then push the contents of the dummy. It should end with a breakpoint insn. Then call here, passing address at which to start the dummy. The contents of all registers are saved before the dummy frame is popped and copied into the buffer BUFFER. The dummy's frame is automatically popped whenever that break is hit. If that is the first time the program stops, run_stack_dummy returns to its caller with that frame already gone and returns 0. Otherwise, run_stack-dummy returns a non-zero value. If the called function receives a random signal, we do not allow the user to continue executing it as this may not work. The dummy frame is poped and we return 1. If we hit a breakpoint, we leave the frame in place and return 2 (the frame will eventually be popped when we do hit the dummy end breakpoint). */ int run_stack_dummy (addr, buffer) CORE_ADDR addr; char *buffer; { struct cleanup *old_cleanups = make_cleanup (null_cleanup, 0); int saved_async = 0; /* Now proceed, having reached the desired place. */ clear_proceed_status (); if (CALL_DUMMY_BREAKPOINT_OFFSET_P) { struct breakpoint *bpt; struct symtab_and_line sal; INIT_SAL (&sal); /* initialize to zeroes */ if (CALL_DUMMY_LOCATION == AT_ENTRY_POINT) { sal.pc = CALL_DUMMY_ADDRESS (); } else { sal.pc = addr - CALL_DUMMY_START_OFFSET + CALL_DUMMY_BREAKPOINT_OFFSET; } sal.section = find_pc_overlay (sal.pc); /* Set up a FRAME for the dummy frame so we can pass it to set_momentary_breakpoint. We need to give the breakpoint a frame in case there is only one copy of the dummy (e.g. CALL_DUMMY_LOCATION == AFTER_TEXT_END). */ flush_cached_frames (); set_current_frame (create_new_frame (read_fp (), sal.pc)); /* If defined, CALL_DUMMY_BREAKPOINT_OFFSET is where we need to put a breakpoint instruction. If not, the call dummy already has the breakpoint instruction in it. addr is the address of the call dummy plus the CALL_DUMMY_START_OFFSET, so we need to subtract the CALL_DUMMY_START_OFFSET. */ bpt = set_momentary_breakpoint (sal, get_current_frame (), bp_call_dummy); bpt->disposition = del; /* If all error()s out of proceed ended up calling normal_stop (and perhaps they should; it already does in the special case of error out of resume()), then we wouldn't need this. */ make_cleanup (breakpoint_auto_delete_contents, &stop_bpstat); } disable_watchpoints_before_interactive_call_start (); proceed_to_finish = 1; /* We want stop_registers, please... */ if (target_can_async_p ()) saved_async = target_async_mask (0); proceed (addr, TARGET_SIGNAL_0, 0); if (saved_async) target_async_mask (saved_async); enable_watchpoints_after_interactive_call_stop (); discard_cleanups (old_cleanups); /* We can stop during an inferior call because a signal is received. */ if (stopped_by_random_signal) return 1; /* We may also stop prematurely because we hit a breakpoint in the called routine. */ if (!stop_stack_dummy) return 2; /* On normal return, the stack dummy has been popped already. */ memcpy (buffer, stop_registers, REGISTER_BYTES); return 0; } /* Proceed until we reach a different source line with pc greater than our current one or exit the function. We skip calls in both cases. Note that eventually this command should probably be changed so that only source lines are printed out when we hit the breakpoint we set. This may involve changes to wait_for_inferior and the proceed status code. */ /* ARGSUSED */ static void until_next_command (from_tty) int from_tty; { struct frame_info *frame; CORE_ADDR pc; struct symbol *func; struct symtab_and_line sal; clear_proceed_status (); frame = get_current_frame (); /* Step until either exited from this function or greater than the current line (if in symbolic section) or pc (if not). */ pc = read_pc (); func = find_pc_function (pc); if (!func) { struct minimal_symbol *msymbol = lookup_minimal_symbol_by_pc (pc); if (msymbol == NULL) error ("Execution is not within a known function."); step_range_start = SYMBOL_VALUE_ADDRESS (msymbol); step_range_end = pc; } else { sal = find_pc_line (pc, 0); step_range_start = BLOCK_START (SYMBOL_BLOCK_VALUE (func)); step_range_end = sal.end; } step_over_calls = 1; step_frame_address = FRAME_FP (frame); step_sp = read_sp (); step_multi = 0; /* Only one call to proceed */ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1); } static void until_command (arg, from_tty) char *arg; int from_tty; { int async_exec = 0; if (!target_has_execution) error ("The program is not running."); /* Find out whether we must run in the background. */ if (arg != NULL) async_exec = strip_bg_char (&arg); /* If we must run in the background, but the target can't do it, error out. */ if (event_loop_p && async_exec && !target_can_async_p ()) error ("Asynchronous execution not supported on this target."); /* If we are not asked to run in the bg, then prepare to run in the foreground, synchronously. */ if (event_loop_p && !async_exec && target_can_async_p ()) { /* Simulate synchronous execution */ async_disable_stdin (); } if (arg) until_break_command (arg, from_tty); else until_next_command (from_tty); } /* Print the result of a function at the end of a 'finish' command. */ static void print_return_value (int structure_return, struct type *value_type) { register value_ptr value; #ifdef UI_OUT static struct ui_stream *stb = NULL; #endif /* UI_OUT */ if (!structure_return) { value = value_being_returned (value_type, stop_registers, structure_return); #ifdef UI_OUT stb = ui_out_stream_new (uiout); ui_out_text (uiout, "Value returned is "); ui_out_field_fmt (uiout, "gdb-result-var", "$%d", record_latest_value (value)); ui_out_text (uiout, "= "); value_print (value, stb->stream, 0, Val_no_prettyprint); ui_out_field_stream (uiout, "return-value", stb); ui_out_text (uiout, "\n"); #else /* UI_OUT */ printf_filtered ("Value returned is $%d = ", record_latest_value (value)); value_print (value, gdb_stdout, 0, Val_no_prettyprint); printf_filtered ("\n"); #endif /* UI_OUT */ } else { /* We cannot determine the contents of the structure because it is on the stack, and we don't know where, since we did not initiate the call, as opposed to the call_function_by_hand case */ #ifdef VALUE_RETURNED_FROM_STACK value = 0; #ifdef UI_OUT ui_out_text (uiout, "Value returned has type: "); ui_out_field_string (uiout, "return-type", TYPE_NAME (value_type)); ui_out_text (uiout, "."); ui_out_text (uiout, " Cannot determine contents\n"); #else /* UI_OUT */ printf_filtered ("Value returned has type: %s.", TYPE_NAME (value_type)); printf_filtered (" Cannot determine contents\n"); #endif /* UI_OUT */ #else value = value_being_returned (value_type, stop_registers, structure_return); #ifdef UI_OUT stb = ui_out_stream_new (uiout); ui_out_text (uiout, "Value returned is "); ui_out_field_fmt (uiout, "gdb-result-var", "$%d", record_latest_value (value)); ui_out_text (uiout, "= "); value_print (value, stb->stream, 0, Val_no_prettyprint); ui_out_field_stream (uiout, "return-value", stb); ui_out_text (uiout, "\n"); #else printf_filtered ("Value returned is $%d = ", record_latest_value (value)); value_print (value, gdb_stdout, 0, Val_no_prettyprint); printf_filtered ("\n"); #endif #endif } } /* Stuff that needs to be done by the finish command after the target has stopped. In asynchronous mode, we wait for the target to stop in the call to poll or select in the event loop, so it is impossible to do all the stuff as part of the finish_command function itself. The only chance we have to complete this command is in fetch_inferior_event, which is called by the event loop as soon as it detects that the target has stopped. This function is called via the cmd_continaution pointer. */ void finish_command_continuation (arg) struct continuation_arg *arg; { register struct symbol *function; struct breakpoint *breakpoint; struct cleanup *cleanups; breakpoint = (struct breakpoint *) arg->data.pointer; function = (struct symbol *) arg->next->data.pointer; cleanups = (struct cleanup *) arg->next->next->data.pointer; if (bpstat_find_breakpoint (stop_bpstat, breakpoint) != NULL && function != 0) { struct type *value_type; CORE_ADDR funcaddr; int struct_return; value_type = TYPE_TARGET_TYPE (SYMBOL_TYPE (function)); if (!value_type) internal_error ("finish_command: function has no target type"); if (TYPE_CODE (value_type) == TYPE_CODE_VOID) { do_exec_cleanups (cleanups); return; } funcaddr = BLOCK_START (SYMBOL_BLOCK_VALUE (function)); struct_return = using_struct_return (value_of_variable (function, NULL), funcaddr, check_typedef (value_type), BLOCK_GCC_COMPILED (SYMBOL_BLOCK_VALUE (function))); print_return_value (struct_return, value_type); } do_exec_cleanups (cleanups); } /* "finish": Set a temporary breakpoint at the place the selected frame will return to, then continue. */ static void finish_command (arg, from_tty) char *arg; int from_tty; { struct symtab_and_line sal; register struct frame_info *frame; register struct symbol *function; struct breakpoint *breakpoint; struct cleanup *old_chain; struct continuation_arg *arg1, *arg2, *arg3; int async_exec = 0; /* Find out whether we must run in the background. */ if (arg != NULL) async_exec = strip_bg_char (&arg); /* If we must run in the background, but the target can't do it, error out. */ if (event_loop_p && async_exec && !target_can_async_p ()) error ("Asynchronous execution not supported on this target."); /* If we are not asked to run in the bg, then prepare to run in the foreground, synchronously. */ if (event_loop_p && !async_exec && target_can_async_p ()) { /* Simulate synchronous execution */ async_disable_stdin (); } if (arg) error ("The \"finish\" command does not take any arguments."); if (!target_has_execution) error ("The program is not running."); if (selected_frame == NULL) error ("No selected frame."); frame = get_prev_frame (selected_frame); if (frame == 0) error ("\"finish\" not meaningful in the outermost frame."); clear_proceed_status (); sal = find_pc_line (frame->pc, 0); sal.pc = frame->pc; breakpoint = set_momentary_breakpoint (sal, frame, bp_finish); if (!event_loop_p || !target_can_async_p ()) old_chain = make_cleanup ((make_cleanup_func) delete_breakpoint, breakpoint); else old_chain = make_exec_cleanup ((make_cleanup_func) delete_breakpoint, breakpoint); /* Find the function we will return from. */ function = find_pc_function (selected_frame->pc); /* Print info on the selected frame, including level number but not source. */ if (from_tty) { printf_filtered ("Run till exit from "); print_stack_frame (selected_frame, selected_frame_level, 0); } /* If running asynchronously and the target support asynchronous execution, set things up for the rest of the finish command to be completed later on, when gdb has detected that the target has stopped, in fetch_inferior_event. */ if (event_loop_p && target_can_async_p ()) { arg1 = (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg)); arg2 = (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg)); arg3 = (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg)); arg1->next = arg2; arg2->next = arg3; arg3->next = NULL; arg1->data.pointer = breakpoint; arg2->data.pointer = function; arg3->data.pointer = old_chain; add_continuation (finish_command_continuation, arg1); } proceed_to_finish = 1; /* We want stop_registers, please... */ proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 0); /* Do this only if not running asynchronously or if the target cannot do async execution. Otherwise, complete this command when the target actually stops, in fetch_inferior_event. */ if (!event_loop_p || !target_can_async_p ()) { /* Did we stop at our breakpoint? */ if (bpstat_find_breakpoint (stop_bpstat, breakpoint) != NULL && function != 0) { struct type *value_type; CORE_ADDR funcaddr; int struct_return; value_type = TYPE_TARGET_TYPE (SYMBOL_TYPE (function)); if (!value_type) internal_error ("finish_command: function has no target type"); /* FIXME: Shouldn't we do the cleanups before returning? */ if (TYPE_CODE (value_type) == TYPE_CODE_VOID) return; funcaddr = BLOCK_START (SYMBOL_BLOCK_VALUE (function)); struct_return = using_struct_return (value_of_variable (function, NULL), funcaddr, check_typedef (value_type), BLOCK_GCC_COMPILED (SYMBOL_BLOCK_VALUE (function))); print_return_value (struct_return, value_type); } do_cleanups (old_chain); } } /* ARGSUSED */ static void program_info (args, from_tty) char *args; int from_tty; { bpstat bs = stop_bpstat; int num = bpstat_num (&bs); if (!target_has_execution) { printf_filtered ("The program being debugged is not being run.\n"); return; } target_files_info (); printf_filtered ("Program stopped at %s.\n", local_hex_string ((unsigned long) stop_pc)); if (stop_step) printf_filtered ("It stopped after being stepped.\n"); else if (num != 0) { /* There may be several breakpoints in the same place, so this isn't as strange as it seems. */ while (num != 0) { if (num < 0) { printf_filtered ("It stopped at a breakpoint that has "); printf_filtered ("since been deleted.\n"); } else printf_filtered ("It stopped at breakpoint %d.\n", num); num = bpstat_num (&bs); } } else if (stop_signal != TARGET_SIGNAL_0) { printf_filtered ("It stopped with signal %s, %s.\n", target_signal_to_name (stop_signal), target_signal_to_string (stop_signal)); } if (!from_tty) { printf_filtered ("Type \"info stack\" or \"info registers\" "); printf_filtered ("for more information.\n"); } } static void environment_info (var, from_tty) char *var; int from_tty; { if (var) { register char *val = get_in_environ (inferior_environ, var); if (val) { puts_filtered (var); puts_filtered (" = "); puts_filtered (val); puts_filtered ("\n"); } else { puts_filtered ("Environment variable \""); puts_filtered (var); puts_filtered ("\" not defined.\n"); } } else { register char **vector = environ_vector (inferior_environ); while (*vector) { puts_filtered (*vector++); puts_filtered ("\n"); } } } static void set_environment_command (arg, from_tty) char *arg; int from_tty; { register char *p, *val, *var; int nullset = 0; if (arg == 0) error_no_arg ("environment variable and value"); /* Find seperation between variable name and value */ p = (char *) strchr (arg, '='); val = (char *) strchr (arg, ' '); if (p != 0 && val != 0) { /* We have both a space and an equals. If the space is before the equals, walk forward over the spaces til we see a nonspace (possibly the equals). */ if (p > val) while (*val == ' ') val++; /* Now if the = is after the char following the spaces, take the char following the spaces. */ if (p > val) p = val - 1; } else if (val != 0 && p == 0) p = val; if (p == arg) error_no_arg ("environment variable to set"); if (p == 0 || p[1] == 0) { nullset = 1; if (p == 0) p = arg + strlen (arg); /* So that savestring below will work */ } else { /* Not setting variable value to null */ val = p + 1; while (*val == ' ' || *val == '\t') val++; } while (p != arg && (p[-1] == ' ' || p[-1] == '\t')) p--; var = savestring (arg, p - arg); if (nullset) { printf_filtered ("Setting environment variable "); printf_filtered ("\"%s\" to null value.\n", var); set_in_environ (inferior_environ, var, ""); } else set_in_environ (inferior_environ, var, val); free (var); } static void unset_environment_command (var, from_tty) char *var; int from_tty; { if (var == 0) { /* If there is no argument, delete all environment variables. Ask for confirmation if reading from the terminal. */ if (!from_tty || query ("Delete all environment variables? ")) { free_environ (inferior_environ); inferior_environ = make_environ (); } } else unset_in_environ (inferior_environ, var); } /* Handle the execution path (PATH variable) */ static const char path_var_name[] = "PATH"; /* ARGSUSED */ static void path_info (args, from_tty) char *args; int from_tty; { puts_filtered ("Executable and object file path: "); puts_filtered (get_in_environ (inferior_environ, path_var_name)); puts_filtered ("\n"); } /* Add zero or more directories to the front of the execution path. */ static void path_command (dirname, from_tty) char *dirname; int from_tty; { char *exec_path; char *env; dont_repeat (); env = get_in_environ (inferior_environ, path_var_name); /* Can be null if path is not set */ if (!env) env = ""; exec_path = strsave (env); mod_path (dirname, &exec_path); set_in_environ (inferior_environ, path_var_name, exec_path); free (exec_path); if (from_tty) path_info ((char *) NULL, from_tty); } #ifdef REGISTER_NAMES char *gdb_register_names[] = REGISTER_NAMES; #endif /* Print out the machine register regnum. If regnum is -1, print all registers (fpregs == 1) or all non-float registers (fpregs == 0). For most machines, having all_registers_info() print the register(s) one per line is good enough. If a different format is required, (eg, for MIPS or Pyramid 90x, which both have lots of regs), or there is an existing convention for showing all the registers, define the macro DO_REGISTERS_INFO(regnum, fp) to provide that format. */ #if !defined (DO_REGISTERS_INFO) #define DO_REGISTERS_INFO(regnum, fp) do_registers_info(regnum, fp) static void do_registers_info (regnum, fpregs) int regnum; int fpregs; { register int i; int numregs = ARCH_NUM_REGS; for (i = 0; i < numregs; i++) { char raw_buffer[MAX_REGISTER_RAW_SIZE]; char virtual_buffer[MAX_REGISTER_VIRTUAL_SIZE]; /* Decide between printing all regs, nonfloat regs, or specific reg. */ if (regnum == -1) { if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (i)) == TYPE_CODE_FLT && !fpregs) continue; } else { if (i != regnum) continue; } /* If the register name is empty, it is undefined for this processor, so don't display anything. */ if (REGISTER_NAME (i) == NULL || *(REGISTER_NAME (i)) == '\0') continue; fputs_filtered (REGISTER_NAME (i), gdb_stdout); print_spaces_filtered (15 - strlen (REGISTER_NAME (i)), gdb_stdout); /* Get the data in raw format. */ if (read_relative_register_raw_bytes (i, raw_buffer)) { printf_filtered ("*value not available*\n"); continue; } /* Convert raw data to virtual format if necessary. */ if (REGISTER_CONVERTIBLE (i)) { REGISTER_CONVERT_TO_VIRTUAL (i, REGISTER_VIRTUAL_TYPE (i), raw_buffer, virtual_buffer); } else { memcpy (virtual_buffer, raw_buffer, REGISTER_VIRTUAL_SIZE (i)); } /* If virtual format is floating, print it that way, and in raw hex. */ if (TYPE_CODE (REGISTER_VIRTUAL_TYPE (i)) == TYPE_CODE_FLT) { register int j; #ifdef INVALID_FLOAT if (INVALID_FLOAT (virtual_buffer, REGISTER_VIRTUAL_SIZE (i))) printf_filtered ("<invalid float>"); else #endif val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0, gdb_stdout, 0, 1, 0, Val_pretty_default); printf_filtered ("\t(raw 0x"); for (j = 0; j < REGISTER_RAW_SIZE (i); j++) { register int idx = TARGET_BYTE_ORDER == BIG_ENDIAN ? j : REGISTER_RAW_SIZE (i) - 1 - j; printf_filtered ("%02x", (unsigned char) raw_buffer[idx]); } printf_filtered (")"); } /* FIXME! val_print probably can handle all of these cases now... */ /* Else if virtual format is too long for printf, print in hex a byte at a time. */ else if (REGISTER_VIRTUAL_SIZE (i) > (int) sizeof (long)) { register int j; printf_filtered ("0x"); for (j = 0; j < REGISTER_VIRTUAL_SIZE (i); j++) printf_filtered ("%02x", (unsigned char) virtual_buffer[j]); } /* Else print as integer in hex and in decimal. */ else { val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0, gdb_stdout, 'x', 1, 0, Val_pretty_default); printf_filtered ("\t"); val_print (REGISTER_VIRTUAL_TYPE (i), virtual_buffer, 0, 0, gdb_stdout, 0, 1, 0, Val_pretty_default); } /* The SPARC wants to print even-numbered float regs as doubles in addition to printing them as floats. */ #ifdef PRINT_REGISTER_HOOK PRINT_REGISTER_HOOK (i); #endif printf_filtered ("\n"); } } #endif /* no DO_REGISTERS_INFO. */ void registers_info (addr_exp, fpregs) char *addr_exp; int fpregs; { int regnum, numregs; register char *end; if (!target_has_registers) error ("The program has no registers now."); if (selected_frame == NULL) error ("No selected frame."); if (!addr_exp) { DO_REGISTERS_INFO (-1, fpregs); return; } do { if (addr_exp[0] == '$') addr_exp++; end = addr_exp; while (*end != '\0' && *end != ' ' && *end != '\t') ++end; numregs = ARCH_NUM_REGS; regnum = target_map_name_to_register (addr_exp, end - addr_exp); if (regnum >= 0) goto found; regnum = numregs; if (*addr_exp >= '0' && *addr_exp <= '9') regnum = atoi (addr_exp); /* Take a number */ if (regnum >= numregs) /* Bad name, or bad number */ error ("%.*s: invalid register", end - addr_exp, addr_exp); found: DO_REGISTERS_INFO (regnum, fpregs); addr_exp = end; while (*addr_exp == ' ' || *addr_exp == '\t') ++addr_exp; } while (*addr_exp != '\0'); } void all_registers_info (addr_exp, from_tty) char *addr_exp; int from_tty; { registers_info (addr_exp, 1); } void nofp_registers_info (addr_exp, from_tty) char *addr_exp; int from_tty; { registers_info (addr_exp, 0); } /* * TODO: * Should save/restore the tty state since it might be that the * program to be debugged was started on this tty and it wants * the tty in some state other than what we want. If it's running * on another terminal or without a terminal, then saving and * restoring the tty state is a harmless no-op. * This only needs to be done if we are attaching to a process. */ /* attach_command -- takes a program started up outside of gdb and ``attaches'' to it. This stops it cold in its tracks and allows us to start debugging it. and wait for the trace-trap that results from attaching. */ void attach_command (args, from_tty) char *args; int from_tty; { #ifdef SOLIB_ADD extern int auto_solib_add; #endif char *exec_file; char *full_exec_path = NULL; dont_repeat (); /* Not for the faint of heart */ if (target_has_execution) { if (query ("A program is being debugged already. Kill it? ")) target_kill (); else error ("Not killed."); } target_attach (args, from_tty); /* Set up the "saved terminal modes" of the inferior based on what modes we are starting it with. */ target_terminal_init (); /* Install inferior's terminal modes. */ target_terminal_inferior (); /* Set up execution context to know that we should return from wait_for_inferior as soon as the target reports a stop. */ init_wait_for_inferior (); clear_proceed_status (); stop_soon_quietly = 1; /* No traps are generated when attaching to inferior under Mach 3 or GNU hurd. */ #ifndef ATTACH_NO_WAIT wait_for_inferior (); #endif /* * If no exec file is yet known, try to determine it from the * process itself. */ exec_file = (char *) get_exec_file (0); if (!exec_file) { exec_file = target_pid_to_exec_file (inferior_pid); if (exec_file) { /* It's possible we don't have a full path, but rather just a filename. Some targets, such as HP-UX, don't provide the full path, sigh. Attempt to qualify the filename against the source path. (If that fails, we'll just fall back on the original filename. Not much more we can do...) */ if (!source_full_path_of (exec_file, &full_exec_path)) full_exec_path = savestring (exec_file, strlen (exec_file)); exec_file_attach (full_exec_path, from_tty); symbol_file_command (full_exec_path, from_tty); } } #ifdef SOLIB_ADD if (auto_solib_add) { /* Add shared library symbols from the newly attached process, if any. */ SOLIB_ADD ((char *) 0, from_tty, ¤t_target); re_enable_breakpoints_in_shlibs (); } #endif /* Take any necessary post-attaching actions for this platform. */ target_post_attach (inferior_pid); normal_stop (); if (attach_hook) attach_hook (); } /* * detach_command -- * takes a program previously attached to and detaches it. * The program resumes execution and will no longer stop * on signals, etc. We better not have left any breakpoints * in the program or it'll die when it hits one. For this * to work, it may be necessary for the process to have been * previously attached. It *might* work if the program was * started via the normal ptrace (PTRACE_TRACEME). */ static void detach_command (args, from_tty) char *args; int from_tty; { dont_repeat (); /* Not for the faint of heart */ target_detach (args, from_tty); #if defined(SOLIB_RESTART) SOLIB_RESTART (); #endif if (detach_hook) detach_hook (); } /* Stop the execution of the target while running in async mode, in the backgound. */ #ifdef UI_OUT void interrupt_target_command_wrapper (args, from_tty) char *args; int from_tty; { interrupt_target_command (args, from_tty); } #endif static void interrupt_target_command (args, from_tty) char *args; int from_tty; { if (event_loop_p && target_can_async_p ()) { dont_repeat (); /* Not for the faint of heart */ target_stop (); } } /* ARGSUSED */ static void float_info (addr_exp, from_tty) char *addr_exp; int from_tty; { #ifdef FLOAT_INFO FLOAT_INFO; #else printf_filtered ("No floating point info available for this processor.\n"); #endif } /* ARGSUSED */ static void unset_command (args, from_tty) char *args; int from_tty; { printf_filtered ("\"unset\" must be followed by the name of "); printf_filtered ("an unset subcommand.\n"); help_list (unsetlist, "unset ", -1, gdb_stdout); } void _initialize_infcmd () { struct cmd_list_element *c; add_com ("tty", class_run, tty_command, "Set terminal for future runs of program being debugged."); add_show_from_set (add_set_cmd ("args", class_run, var_string_noescape, (char *) &inferior_args, "Set argument list to give program being debugged when it is started.\n\ Follow this command with any number of args, to be passed to the program.", &setlist), &showlist); c = add_cmd ("environment", no_class, environment_info, "The environment to give the program, or one variable's value.\n\ With an argument VAR, prints the value of environment variable VAR to\n\ give the program being debugged. With no arguments, prints the entire\n\ environment to be given to the program.", &showlist); c->completer = noop_completer; add_prefix_cmd ("unset", no_class, unset_command, "Complement to certain \"set\" commands", &unsetlist, "unset ", 0, &cmdlist); c = add_cmd ("environment", class_run, unset_environment_command, "Cancel environment variable VAR for the program.\n\ This does not affect the program until the next \"run\" command.", &unsetlist); c->completer = noop_completer; c = add_cmd ("environment", class_run, set_environment_command, "Set environment variable value to give the program.\n\ Arguments are VAR VALUE where VAR is variable name and VALUE is value.\n\ VALUES of environment variables are uninterpreted strings.\n\ This does not affect the program until the next \"run\" command.", &setlist); c->completer = noop_completer; add_com ("path", class_files, path_command, "Add directory DIR(s) to beginning of search path for object files.\n\ $cwd in the path means the current working directory.\n\ This path is equivalent to the $PATH shell variable. It is a list of\n\ directories, separated by colons. These directories are searched to find\n\ fully linked executable files and separately compiled object files as needed."); c = add_cmd ("paths", no_class, path_info, "Current search path for finding object files.\n\ $cwd in the path means the current working directory.\n\ This path is equivalent to the $PATH shell variable. It is a list of\n\ directories, separated by colons. These directories are searched to find\n\ fully linked executable files and separately compiled object files as needed.", &showlist); c->completer = noop_completer; add_com ("attach", class_run, attach_command, "Attach to a process or file outside of GDB.\n\ This command attaches to another target, of the same type as your last\n\ \"target\" command (\"info files\" will show your target stack).\n\ The command may take as argument a process id or a device file.\n\ For a process id, you must have permission to send the process a signal,\n\ and it must have the same effective uid as the debugger.\n\ When using \"attach\" with a process id, the debugger finds the\n\ program running in the process, looking first in the current working\n\ directory, or (if not found there) using the source file search path\n\ (see the \"directory\" command). You can also use the \"file\" command\n\ to specify the program, and to load its symbol table."); add_com ("detach", class_run, detach_command, "Detach a process or file previously attached.\n\ If a process, it is no longer traced, and it continues its execution. If\n\ you were debugging a file, the file is closed and gdb no longer accesses it."); add_com ("signal", class_run, signal_command, "Continue program giving it signal specified by the argument.\n\ An argument of \"0\" means continue program without giving it a signal."); add_com ("stepi", class_run, stepi_command, "Step one instruction exactly.\n\ Argument N means do this N times (or till program stops for another reason)."); add_com_alias ("si", "stepi", class_alias, 0); add_com ("nexti", class_run, nexti_command, "Step one instruction, but proceed through subroutine calls.\n\ Argument N means do this N times (or till program stops for another reason)."); add_com_alias ("ni", "nexti", class_alias, 0); add_com ("finish", class_run, finish_command, "Execute until selected stack frame returns.\n\ Upon return, the value returned is printed and put in the value history."); add_com ("next", class_run, next_command, "Step program, proceeding through subroutine calls.\n\ Like the \"step\" command as long as subroutine calls do not happen;\n\ when they do, the call is treated as one instruction.\n\ Argument N means do this N times (or till program stops for another reason)."); add_com_alias ("n", "next", class_run, 1); if (xdb_commands) add_com_alias ("S", "next", class_run, 1); add_com ("step", class_run, step_command, "Step program until it reaches a different source line.\n\ Argument N means do this N times (or till program stops for another reason)."); add_com_alias ("s", "step", class_run, 1); add_com ("until", class_run, until_command, "Execute until the program reaches a source line greater than the current\n\ or a specified line or address or function (same args as break command).\n\ Execution will also stop upon exit from the current stack frame."); add_com_alias ("u", "until", class_run, 1); add_com ("jump", class_run, jump_command, "Continue program being debugged at specified line or address.\n\ Give as argument either LINENUM or *ADDR, where ADDR is an expression\n\ for an address to start at."); if (xdb_commands) add_com ("go", class_run, go_command, "Usage: go <location>\n\ Continue program being debugged, stopping at specified line or \n\ address.\n\ Give as argument either LINENUM or *ADDR, where ADDR is an \n\ expression for an address to start at.\n\ This command is a combination of tbreak and jump."); if (xdb_commands) add_com_alias ("g", "go", class_run, 1); add_com ("continue", class_run, continue_command, "Continue program being debugged, after signal or breakpoint.\n\ If proceeding from breakpoint, a number N may be used as an argument,\n\ which means to set the ignore count of that breakpoint to N - 1 (so that\n\ the breakpoint won't break until the Nth time it is reached)."); add_com_alias ("c", "cont", class_run, 1); add_com_alias ("fg", "cont", class_run, 1); add_com ("run", class_run, run_command, "Start debugged program. You may specify arguments to give it.\n\ Args may include \"*\", or \"[...]\"; they are expanded using \"sh\".\n\ Input and output redirection with \">\", \"<\", or \">>\" are also allowed.\n\n\ With no arguments, uses arguments last specified (with \"run\" or \"set args\").\n\ To cancel previous arguments and run with no arguments,\n\ use \"set args\" without arguments."); add_com_alias ("r", "run", class_run, 1); if (xdb_commands) add_com ("R", class_run, run_no_args_command, "Start debugged program with no arguments."); add_com ("interrupt", class_run, interrupt_target_command, "Interrupt the execution of the debugged program."); add_info ("registers", nofp_registers_info, "List of integer registers and their contents, for selected stack frame.\n\ Register name as argument means describe only that register."); add_info_alias ("r", "registers", 1); if (xdb_commands) add_com ("lr", class_info, nofp_registers_info, "List of integer registers and their contents, for selected stack frame.\n\ Register name as argument means describe only that register."); add_info ("all-registers", all_registers_info, "List of all registers and their contents, for selected stack frame.\n\ Register name as argument means describe only that register."); add_info ("program", program_info, "Execution status of the program."); add_info ("float", float_info, "Print the status of the floating point unit\n"); inferior_args = savestring ("", 1); /* Initially no args */ inferior_environ = make_environ (); init_environ (inferior_environ); }