URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [gdb-5.0/] [gdb/] [rdi-share/] [drivers.h] - Rev 107
Go to most recent revision | Compare with Previous | Blame | View Log
/* * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved. * * This software may be freely used, copied, modified, and distributed * provided that the above copyright notice is preserved in all copies of the * software. */ /* -*-C-*- * * $Revision: 1.1.1.1 $ * $Date: 2001-05-18 11:16:40 $ * * * Project: ANGEL * * Title: Definitions for device driver interface. */ #ifndef angsd_drivers_h #define angsd_drivers_h #include "rxtx.h" #ifndef __cplusplus typedef struct DeviceDescr DeviceDescr; typedef struct DriverCall DriverCall; #endif /* * used to pass packets across the driver interface */ struct DriverCall { struct data_packet dc_packet; void *dc_context; }; /* * used to describe a device driver */ struct DeviceDescr { char *DeviceName; int (*DeviceOpen)(const char *name, const char *arg); int (*DeviceMatch)(const char *name, const char *arg); void (*DeviceClose)(void); int (*DeviceRead)(DriverCall *dc, bool block); int (*DeviceWrite)(DriverCall *dc); int (*DeviceIoctl)(const int opcode, void *args); void *SwitcherState; /* used by switcher interface */ }; /* * Function: DeviceOpen * * Purpose: Open a communications device * * Pre-conditions: No previous open is still active * * Params: * Input: name Identifies which device to open. This can either be * a host specific identifier (e.g. "/dev/ttya", * "COM1:"), or a number which is used to refer to * `standard' interfaces, so "1" would be the first host * interface, "2" the second, and so on. * * arg Driver specific arguments. For example, some serial * drivers accept speed and control arguments such as * "9600" or "19200/NO_BREAK". These arguments are * completely free-form: it is the individual drivers * which do the necessary interpretation. * * Returns: * OK: 0 * Error: -1 */ extern int DeviceOpen(const char *name, const char *arg); /* * Function: DeviceMatch * * Purpose: Check whether parameters are OK to be passed to DeviceOpen * * Params: * Input: name Identifies which device to open. This can either be * a host specific identifier (e.g. "/dev/ttya", * "COM1:"), or a number which is used to refer to * `standard' interfaces, so "1" would be the first host * interface, "2" the second, and so on. * * arg Driver specific arguments. For example, some serial * drivers accept speed and control arguments such as * "9600" or "19200/NO_BREAK". These arguments are * completely free-form: it is the individual drivers * which do the necessary interpretation. * * Returns: * OK: 0 * Error: -1 */ extern int DeviceMatch(const char *name, const char *arg); /* * Function: DeviceClose * * Purpose: Close a communications device * * Pre-conditions: Device must have been previously opened * * Params: None * * Returns: Nothing */ extern void DeviceClose(void); /* * Function: DeviceRead * * Purpose: Try to read a complete packet from a communications device. * This read must usually be non-blocking, i.e. it should read as * many data from the device as needed to complete the packet, * but it should not wait if the packet is not complete, and no * more data are currently available from the device. * As an optimisation the read can optionally block when 'block' * is TRUE, but only for a short time. It is acceptable for the * 'block' parameter to be ignored in which case all reads * should be non-blocking. * * Pre-conditions: Device has been opened via DeviceOpen() * * Params: * In/Out: dc Describes the packet being read (dc->dc_packet); * dc->dc_context is for the driver to store private * context, and is guaranteed to be NULL the first * time DeviceRead is called for a given packet. * * In: block If TRUE, read may safely block for a short period * of time (say up to 20ms), to avoid high CPU load * whilst waiting for a reply. * If FALSE, read MUST NOT block. * * Returns: * OK: 1 (packet is complete) * 0 (packet is not yet complete) * Error: -1 bad packet * * Post-conditions: should a calamatous error occur panic() will be called */ extern int DeviceRead(DriverCall *dc, bool block); /* * Function: DeviceWrite * * Purpose: Try to write a packet to a communications device. This write * must be non-blocking, i.e. it should write as many data to * the device as is immediately possible, but should not wait * for space to send any more after that. * * Pre-conditions: Device has been opened via DeviceOpen() * * Params: * In/Out: dc Describes the packet being written (dc->dc_packet); * dc->dc_context is for the driver to store private * context, and is guaranteed to be NULL the first * time DeviceWrite is called for a given packet. * * Returns: * OK: 1 (all of the packet has been written) * 0 (some of the packet remains to be written) * Error: -1 */ extern int DeviceWrite(DriverCall *dc); /* * Function: DeviceIoctl * * Purpose: Perform miscellaneous driver operations * * Pre-conditions: Device has been open via DeviceOpen() * * Params: * Input: opcode Reason code indicating the operation to perform * In/Out: args Pointer to opcode-sensitive arguments/result space * * Returns: * OK: 0 * Error: -1 */ extern int DeviceIoctl(const int opcode, void *args); #endif /* !defined(angsd_drivers_h) */ /* EOF drivers.h */
Go to most recent revision | Compare with Previous | Blame | View Log