URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [gdb-5.0/] [gdb/] [rdi-share/] [unixcomm.h] - Rev 1775
Go to most recent revision | Compare with Previous | Blame | View Log
/* * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved. * * This software may be freely used, copied, modified, and distributed * provided that the above copyright notice is preserved in all copies of the * software. */ /* -*-C-*- * * $Revision: 1.1.1.1 $ * $Date: 2001-05-18 11:16:47 $ * */ #ifndef angsd_unixcomm_h #define angsd_unixcomm_h #include <errno.h> #if defined(BSD) # define ERRNO_FOR_BLOCKED_IO EWOULDBLOCK #else # define ERRNO_FOR_BLOCKED_IO EAGAIN #endif /* * Function: Unix_MatchValidSerialDevice * Purpose: check that the serial driver/port name is valid * and return the actual device name if it is. * * Params: * Input: name Name of device going to be used * * Returns: * OK: Pointer to name of the device matched * Error or unrecognised deivce: 0 */ extern const char *Unix_MatchValidSerialDevice(const char *name); /* * Function: Unix_IsSerialInUse * Purpose: check whether the serial port is in use * * Params: * Input: Nothing * * Returns: * OK: 0 Serial device not in use * Error: -1 Serial device in use */ extern int Unix_IsSerialInUse(void); /* * Function: Unix_OpenSerial * Purpose: open the serial port * * Params: * Input: name Name of device to open * * Returns: Unix 'open' returns */ extern int Unix_OpenSerial(const char *name); /* * Function: Unix_CloseSerial * Purpose: close the serial port * * Params: * Input: Nothing * * Returns: Nothing */ extern void Unix_CloseSerial(void); /* * Function: Unix_ReadSerial * Purpose: reads a specified number of bytes (or less) from the serial port * * Params: * Input: buf Buffer to store read bytes * n Maximum number of bytes to read * * Returns: Unix 'read' returns */ extern int Unix_ReadSerial(unsigned char *buf, int n, bool block); /* * Function: Unix_WriteSerial * Purpose: writes a specified number of bytes (or less) to the serial port * * Params: * Input: buf Buffer to write bytes from * n Maximum number of bytes to write * * Returns: Unix 'write' returns */ extern int Unix_WriteSerial(unsigned char *buf, int n); /* * Function: Unix_ResetSerial * Purpose: resets the serial port for another operation * * Params: * Input: Nothing * * Returns: Nothing */ extern void Unix_ResetSerial(void); /* * Function: Unix_SetSerialBaudRate * Purpose: check that the serial driver/port name is valid * * Params: * Input: baudrate termios value for baud rate * * Returns: Nothing */ extern void Unix_SetSerialBaudRate(int baudrate); /* * Function: Unix_ioctlNonBlocking * Purpose: sets the serial port to non-blocking IO * * Params: * Input: Nothing * * Returns: Nothing */ extern void Unix_ioctlNonBlocking(void); /* * Function: Unix_IsValidParallelDevice * Purpose: check whether the combined serial and parallel device specification * is ok, and return the ports selected * * Params: * Input: portstring - is a string which specifies which serial * and parallel ports are to be used. Can * include s=<val> and p=<val> separated by a * comma. * * Returns: * Output: *sername - returns the device name of the chosen serial port * *parname - returns the device name of the chosen parallel port * If either of these is NULL on return then the match failed. */ extern void Unix_IsValidParallelDevice( const char *portstring, char **sername, char **parname ); /* * Function: Unix_IsParallelInUse * Purpose: check whether the parallel port is in use * * Params: * Input: Nothing * * Returns: * OK: 0 Parallel device not in use * Error: -1 Parallel device in use */ extern int Unix_IsParallelInUse(void); /* * Function: Unix_OpenParallel * Purpose: open the parallel port * * Params: * Input: name Name of device to open * * Returns: Unix 'open' returns */ extern int Unix_OpenParallel(const char *name); /* * Function: Unix_CloseParallel * Purpose: close the parallel port * * Params: * Input: Nothing * * Returns: Nothing */ extern void Unix_CloseParallel(void); /* * Function: Unix_WriteParallel * Purpose: writes a specified number of bytes (or less) to the parallel port * * Params: * Input: buf Buffer to write bytes from * n Maximum number of bytes to write * * Returns: Unix 'write' returns */ extern unsigned int Unix_WriteParallel(unsigned char *buf, int n); /* * Function: Unix_ResetParallel * Purpose: resets the parallel port for another operation * * Params: * Input: Nothing * * Returns: Nothing */ extern void Unix_ResetParallel(void); #endif /* ndef angsd_unixcomm_h */ /* EOF unixcomm.h */
Go to most recent revision | Compare with Previous | Blame | View Log