OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [gdb-5.0/] [gdb/] [testsuite/] [gdb.base/] [a2-run.exp] - Rev 1765

Compare with Previous | Blame | View Log

#   Copyright (C) 1988, 1990, 1991, 1992, 1994, 1997 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  

# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu

# This file was written by Rob Savoye. (rob@cygnus.com)

# These tests don't work for targets can't take arguments...

if [target_info exists noargs] then {
    verbose "Skipping a2-run.exp because of noargs."
    return
}

if [target_info exists gdb,noinferiorio] {
    verbose "Skipping a2-run.exp because of noinferiorio."
    return
}

if $tracelevel then {
    strace $tracelevel
}

#
# test running programs
#
set prms_id 0
set bug_id 0

set testfile "run"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
    gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}

gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}

# Run with no arguments.
# On VxWorks this justs make sure the program was run.
gdb_run_cmd

if [istarget "*-*-vxworks*"] then {
    set timeout 120
    verbose "Timeout is now $timeout seconds" 2
    gdb_expect {
         "Program exited normally" {
            unresolved "run \"$testfile\" with no args"
        }
         -re "usage:  factorial <number>" {
            pass "run \"$testfile\" with no args"
        }
        timeout {
            fail "(timeout) run \"$testfile\" with no args"
        }
    }
    set timeout 10
    verbose "Timeout is now $timeout seconds" 2
    gdb_expect -re "$gdb_prompt $" {}
} else {
    gdb_expect {
        -re ".*usage:  factorial <number>.*Program exited with code 01.*$gdb_prompt $" {
            pass "run \"$testfile\" with no args"
        }
        -re ".*$gdb_prompt $" {
            fail "run \"$testfile\" with no args"
            verbose "expect_out is $expect_out(buffer)" 2
        }
        timeout {
            fail "(timeout) run \"$testfile\" no args"
        }
    }
}
# Now run with some arguments
if [istarget "*-*-vxworks*"] then {
    send_gdb "run vxmain \"5\"\n"
    gdb_expect -re "run vxmain \"5\"\r\n" {}
    set timeout 120
    verbose "Timeout is now $timeout seconds" 2
    gdb_expect {
         "Program exited normally" {
            unresolved "run \"$testfile\" with arg"
        }
         "120" {
            pass "run \"$testfile\" with arg"
        }
        timeout {
            fail "(timeout) run \"$testfile\" with arg"
        }
    }
    set timeout 10
    verbose "Timeout is now $timeout seconds" 2
    gdb_expect -re "$gdb_prompt $" {}
} else {
        setup_xfail "mips-idt-*" "arm-*-coff strongarm-*-coff"
        gdb_run_cmd 5
        gdb_expect {
            -re ".*120.*$gdb_prompt $"\
                                { pass "run \"$testfile\" with arg" }
            -re ".*$gdb_prompt $"       { fail "run \"$testfile\" with arg" }
            timeout             { fail "(timeout) run \"$testfile\" with arg" }
        }
}

# Run again with same arguments.
setup_xfail "mips-idt-*"
gdb_run_cmd

if [istarget "*-*-vxworks*"] then {
    set timeout 120
    verbose "Timeout is now $timeout seconds" 2
    gdb_expect {
         "Program exited normally" {
            unresolved "run \"$testfile\" again with same args"
        }
         "120" { pass "run \"$testfile\" again with same args" }
        timeout { fail "(timeout) run \"$testfile\" again with same args" }
    }
    set timeout 10
    verbose "Timeout is now $timeout seconds" 2
    gdb_expect -re "$gdb_prompt $" {}
} else {
    setup_xfail "arm-*-coff strongarm-*-coff"
    gdb_expect {
            -re ".*120.*$gdb_prompt $"\
                                { pass "run \"$testfile\" again with same args" }
            -re ".*$gdb_prompt $"       { fail "run \"$testfile\" again with same args" }
            timeout             { fail "(timeout) run \"$testfile\" again with same args" }
        }
}

# Use "set args" command to specify no arguments as default and run again.
if [istarget "*-*-vxworks*"] then {
    send_gdb "set args main\n"
} else {
    send_gdb "set args\n"
}
gdb_expect -re "$gdb_prompt $"

gdb_run_cmd

if [istarget "*-*-vxworks*"] then {
    set timeout 120
    verbose "Timeout is now $timeout seconds" 2
    gdb_expect {
         "Program exited normally" {
            unresolved "run after setting args to nil"
        }
         "usage:  factorial <number>" {
            pass "run after setting args to nil"
        }
        timeout {
            fail "(timeout) run after setting args to nil"
        }
    }
    set timeout 10
    verbose "Timeout is now $timeout seconds" 2
    gdb_expect -re "$gdb_prompt $" {}
} else {
    gdb_expect {
        -re ".*usage:  factorial <number>.*$gdb_prompt $" {
            pass "run after setting args to nil"
        }
        -re ".*$gdb_prompt $" {
            fail "run after setting args to nil"
        }
        timeout {
            fail "(timeout) run after setting args to nil"
        }
    }
}

# Use "set args" command to specify an argument and run again.
setup_xfail "mips-idt-*"
if [istarget "*-*-vxworks*"] then {
   send_gdb "set args vxmain \"6\"\n"
} else {
        send_gdb "set args 6\n"
}
gdb_expect -re "$gdb_prompt $"
gdb_run_cmd

if [istarget "*-*-vxworks*"] then {
    set timeout 120
    verbose "Timeout is now $timeout seconds" 2
    gdb_expect {
         "Program exited normally" {
            unresolved "run \"$testfile\" again after setting args"
        }
         "720" {
            pass "run \"$testfile\" again after setting args"
        }
        timeout {
            fail "(timeout) run \"$testfile\" again after setting args"
        }
    }
    set timeout 10
    verbose "Timeout is now $timeout seconds" 2
    gdb_expect -re "$gdb_prompt $" {}
} else {
    setup_xfail "arm-*-coff strongarm-*-coff"
    gdb_expect {
            -re ".*720.*$gdb_prompt $" {
                pass "run \"$testfile\" again after setting args"
            }
            -re ".*$gdb_prompt $" {
                fail "run \"$testfile\" again after setting args"
            }
            timeout {
                fail "(timeout) run \"$testfile\" again after setting args"
            }
        }
}

# GOAL: Test that shell is being used with "run".  For remote debugging
# targets, there is no guarantee that a "shell" (whatever that is) is used.
if [isnative] then {
    send_gdb "run `echo 8`\n"
    gdb_expect {
        -re "Starting program.*40320.*$gdb_prompt $" {
            pass "run \"$testfile\" with shell"
        }
        -re ".*$gdb_prompt $" {
            fail "run \"$testfile\" with shell"
        }
        timeout {
            fail "(timeout) run \"$testfile\" with shell"
        }
    }
}

# Reset the default arguments for VxWorks
if [istarget "*-*-vxworks*"] then {
    send_gdb "set args main\n"
    gdb_expect -re ".*$gdb_prompt $" {}
}

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.