OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [gdb-5.0/] [gdb/] [testsuite/] [gdb.base/] [return.exp] - Rev 1765

Compare with Previous | Blame | View Log

# Copyright (C) 1992, 1997 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  

# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu

# This file was written by Jeff Law. (law@cs.utah.edu)

if $tracelevel then {
        strace $tracelevel
}

set prms_id 0
set bug_id 0

set testfile "return"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}

proc return_tests { } {
    global gdb_prompt


    if { ! [ runto func1 ] } then { return 0 }
    send_gdb "return\n"
    gdb_expect {
        -re "Make .* return now.*y or n. $" {
            send_gdb "y\n"
            exp_continue
        }
        -re "func1 ..;.*$gdb_prompt $" {
            send_gdb "step\n"
            exp_continue
        }
    -re ".*in main after func1.*$gdb_prompt $" { pass "simple return" }
    -re "$gdb_prompt $" { fail "simple return" }
    timeout { fail "(timeout) simple return" }
    }

    # Set breakpoints in other interesting functions.
    gdb_test "break func2" "" "break func2"
    gdb_test "break func3" "" "break func3"

    gdb_test "continue" "return -5;" "continue to return of -5"
    send_gdb "return 5\n"
    gdb_expect {
        -re "Make .* return now.*y or n. $" {
            send_gdb "y\n"
            exp_continue
        }
    -re ".*tmp2 = func2.*$gdb_prompt $" { }
    -re "$gdb_prompt $" { fail "did not return (integer test)" }
    timeout { fail "(timeout) did not return (integer test)" }
    }
    gdb_test "next" "tmp3 = func3.*" "next over call to func2"

    gdb_test "p tmp2" ".* = 5" "correct value returned (integer test)"

    gdb_test "continue" "return -5.0;" "continue to return of -5.0"
    send_gdb "return 5.0\n"
    gdb_expect {
        -re "Make .* return now.*y or n. $" {
            send_gdb "y\n"
            exp_continue
        }
        -re ".*tmp3 = func3.*$gdb_prompt $" { }
        -re "$gdb_prompt $" { fail "did not return (double test)" }
        timeout { fail "(timeout) did not return (double test)" }
    }

    gdb_test "next" "printf.*" "next over call to func3"

    # This test is going to fail on all i*86 systems using an i*87.
    # When returning a floating point value from a function, all known
    # compilers do this via a `fldl' instruction, which pushes the floating
    # value on the i387 stack. This causes two problems:
    # a) Most i*86 targets do not store (or cannot store, see comment in
    #    in i386v-nat.c:i386_register_u_addr) the floating point registers
    #    to the target.
    # b) gdb would have to figure out if the `fldl' instruction (or variants
    #    of it) has already been executed. If not, it would have to simulate
    #    a push instruction, as it is not enough to write the register,
    #    the floating point `stack pointer' has to be updated too.
    #    Do not expect this to get fixed anytime soon.

    # This test also fails for sparc Solaris 2.3 & 2.4, but passes under 2.5
    # At the time the `next' is issued, the floating point unit for the
    # process is not yet initialized, and the storing of the floating
    # point value to the floating point return register is ignored.
    # Xfail it for current versions that are known to fail.  Presumably
    # if some future version does initialize the floating point unit at
    # process start, making this test pass, it will be for a version that
    # is not xfailed.

    setup_xfail "i*86-*-*" "sparc-*-solaris2.3*" "sparc-*-solaris2.4*"
    gdb_test "p tmp3" ".* = 5.*" "correct value returned double test (known problem with i*86 and sparc solaris"
}


# Start with a fresh gdb.

gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}

set timeout 30
return_tests

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.