Subversion Repositories or1k

#   Copyright (C) 1995, 1997 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  

if [target_info exists gdb,nosignals] {
    verbose "Skipping sigall.exp because of nosignals."
    continue
}

if $tracelevel then {
        strace $tracelevel
}

set prms_id 0
set bug_id 0

gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir

set testfile sigall
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}

# Make the first signal SIGABRT because it is always supported.
set sig_supported 1
set thissig "ABRT"

proc test_one_sig {nextsig} {
    global sig_supported
    global gdb_prompt
    global thissig

    set this_sig_supported $sig_supported
    gdb_test "handle SIG$thissig stop print" \
        "SIG$thissig\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Yes.*"
    gdb_test "b handle_$thissig" "Breakpoint \[0-9\]+ .*"
    gdb_test "b gen_$nextsig" "Breakpoint \[0-9\]+ .*"

    set need_another_continue 1
    set missed_handler 0
    if $this_sig_supported then {
        send_gdb "continue\n"
        if { $thissig == "IO" } {
            setup_xfail "i*86-pc-linuxoldld-gnu" "i*86-pc-linuxaout-gnu"
        }
        gdb_expect {
            -re "Continuing.*Program received signal SIG$thissig.*$gdb_prompt $" {
                pass "get signal $thissig"
            }
            -re ".*$gdb_prompt $" {
                fail "get signal $thissig"
                set need_another_continue 0
            }
            default {
                fail "get signal $thissig (eof or timeout)"
            }
        }
    }
    if [ istarget "alpha-dec-osf3*" ] then {
        # OSF/1-3.x is unable to continue with a job control stop signal.
        # The inferior remains stopped without an event of interest
        # and GDB waits forever for the inferior to stop on an event
        # of interest. Work around the kernel bug.
        if { $thissig == "TSTP" || $thissig == "TTIN" || $thissig == "TTOU" } {
            setup_xfail "alpha-dec-osf3*"
            fail "cannot continue from signal $thissig"
            set need_another_continue 0
        }
    }

    if $need_another_continue then {
        send_gdb "continue\n"
        if { $thissig == "URG" } {
            setup_xfail "i*86-pc-linuxoldld-gnu" "i*86-pc-linuxaout-gnu"
        }
        # Either Lynx or GDB screws up on SIGPRIO
        if { $thissig == "PRIO" } {
            setup_xfail "*-*-*lynx*"
        }
        gdb_expect {
            -re "Breakpoint.*handle_$thissig.*$gdb_prompt $" {
                pass "send signal $thissig"
            }
            -re "Breakpoint.*gen_$nextsig.*kill.*$gdb_prompt $" {
                fail "missed breakpoint at handle_$thissig"
                set missed_handler 1
            }
        }
    }

    if { $missed_handler == "0" } then {
        send_gdb "signal 0\n"
        gdb_expect {
            -re "Breakpoint.*gen_$nextsig.*kill.*$gdb_prompt $" {
                pass "advance to $nextsig"
                set sig_supported 1
            }
            -re "Breakpoint.*gen_$nextsig.*handle.*$gdb_prompt $" {
                pass "advance to $nextsig"
                set sig_supported 0
            }
            -re ".*$gdb_prompt $" { fail "advance to $nextsig" }
            default { fail "advance to $nextsig (eof or timeout)" }
        }
    }
    set thissig $nextsig
}

gdb_load $binfile

runto gen_ABRT
test_one_sig HUP
test_one_sig QUIT
test_one_sig ILL
test_one_sig EMT
test_one_sig FPE
test_one_sig BUS
test_one_sig SEGV
test_one_sig SYS
test_one_sig PIPE
test_one_sig ALRM
test_one_sig URG
test_one_sig TSTP
test_one_sig CONT
test_one_sig CHLD
test_one_sig TTIN
test_one_sig TTOU
test_one_sig IO
test_one_sig XCPU
test_one_sig XFSZ
test_one_sig VTALRM
test_one_sig PROF
test_one_sig WINCH
test_one_sig LOST
test_one_sig USR1
test_one_sig USR2
test_one_sig PWR
test_one_sig POLL
test_one_sig WIND
test_one_sig PHONE
test_one_sig WAITING
test_one_sig LWP
test_one_sig DANGER
test_one_sig GRANT
test_one_sig RETRACT
test_one_sig MSG
test_one_sig SOUND
test_one_sig SAK
test_one_sig PRIO
test_one_sig 33
test_one_sig 34
test_one_sig 35
test_one_sig 36
test_one_sig 37
test_one_sig 38
test_one_sig 39
test_one_sig 40
test_one_sig 41
test_one_sig 42
test_one_sig 43
test_one_sig 44
test_one_sig 45
test_one_sig 46
test_one_sig 47
test_one_sig 48
test_one_sig 49
test_one_sig 50
test_one_sig 51
test_one_sig 52
test_one_sig 53
test_one_sig 54
test_one_sig 55
test_one_sig 56
test_one_sig 57
test_one_sig 58
test_one_sig 59
test_one_sig 60
test_one_sig 61
test_one_sig 62
test_one_sig 63
test_one_sig TERM

# The last signal (SIGTERM) gets handled slightly differently because
# we are not setting up for another test.
gdb_test "handle SIGTERM stop print" \
    "SIGTERM\[ \t\]*Yes\[ \t\]*Yes\[ \t\]*Yes.*"
gdb_test "b handle_TERM" "Breakpoint \[0-9\]+ .*"
gdb_test "continue" \
    "Continuing.*Program received signal SIGTERM.*" \
    "get signal TERM"
gdb_test "continue" "Breakpoint.*handle_TERM.*" "send signal TERM"
gdb_continue_to_end "continue to sigall exit"

return 0