OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [gdb-5.0/] [gdb/] [testsuite/] [gdb.mi/] [ChangeLog-mi] - Rev 107

Go to most recent revision | Compare with Previous | Blame | View Log

Tue Apr 18 15:36:07 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * Makefile.in (clean mostlyclean): Do not delete $(MISCELLANEOUS).

Tue Mar 14 15:54:57 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        * basics.c: Add EMACS local variable pointing change-log at this
        file.
        * Makefile.in: Ditto

2000-03-13  James Ingham  <jingham@leda.cygnus.com>

        * mi-var-block.exp: The error report from varobj_create changed
        since I am now trapping parse_exp_1 errors.  Change the tests to
        match the new error message.
        * mi-var-child.exp: Ditto.
        * mi-var-cmd.exp: Ditto.

2000-03-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-disassemble.exp: Don't assume numbers for the offset
        values. They can be different depending on the architecture.

        * mi-watch.exp (test_watchpoint_triggering): In same cases the
        type can be 'hw wathcpoint' not just 'watchpoint'. Adjust for that.

        * basics.c (callee4): Make the function return something,
        otherwise the return value is undefined.

2000-03-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-basics.exp: Comment out test for a still unimplemented operation.

        * mi-disassemble.exp: Rewrite most of the tests to conform to new
        disassemble interface.

Sat Mar  4 13:55:08 2000  Andrew Cagney  <cagney@b1.cygnus.com>

        From Fri 3 Mar 2000 Peter Schauer:
        * mi-support.exp (mi_gdb_start): When GDB doesn't recongize -i=mi
        option, assume no MI support present.

2000-02-01  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-support.exp (mi_gdb_start): Update to recognize start up
        message with 'UI_OUT' instead of 'HEADLESS'.

2000-01-27  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-regs.exp (test_running_the_program): Add global var 'hex'.

        * mi-stack.exp, mi-stepi.exp, mi-until.exp, mi-watch.exp,
        mi-var-display.exp, mi-var-cmd.exp, mi-var-child.exp,
        mi-var-block.exp: Update all stopped messages.

2000-01-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-console.exp, mi-disassemble.exp, mi-eval.exp,
        mi-read-memory.exp, mi-regs.exp, mi-return.exp, mi-simplerun.exp:
        Update stopped messages, update copyright.
        
        * mi-disassemble.exp: Update error messages output.
        
        * mi-support.exp (proc mi_step): Make gdb do a 'step' command, not
        a 'next'. Update stopped message.
        (proc mi_next): Update stop message.
        (proc mi_run_to_main): Update stopped message.
        Update copyright.

2000-01-11  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-simplerun.exp: Remove stack frames tests from here, to:

        * mi-stack.exp: New file, tests for stack commands.

        * mi-support.exp (mi_run_to_main, mi_next, mi_step) : Update to
        include thread-id in stopped message.

        * mi-regs.exp: Update break-insert output.

        * (mi-console.exp, mi-disassemble.exp, mi-eval.exp,
        mi-read-memory.exp, mi-regs.exp, mi-return.exp, mi-simplerun.exp,
        mi-stepi.exp, mi-until.exp, mi-var-block.exp, mi-var-child.exp,
        mi-var-cmd.exp, mi-var-display.exp, mi-watch.exp): Update stopped
        message to include thread-id.

Wed Dec 29 22:06:05 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * mi-watch.exp, mi-var-display.exp, mi-var-cmd.exp,
        mi-var-child.exp, mi-var-block.exp, mi-until.exp, mi-stepi.exp,
        mi-simplerun.exp, mi-return.exp, mi-support.exp, mi-eval.exp,
        mi-console.exp, mi-disassemble.exp, mi-break.exp: Update to
        reflect extended output from -break-insert command.
        
        * mi-break.exp (test_rbreak_creation_and_listing): XFAIL regexp
        tests.  -r flag broken by above.
        
Sun Dec 19 19:28:13 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * cpp_variable.cc, cpp_variable.h, c_variable.c: Delete.

Fri Dec 17 20:59:55 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * mi-read-memory.exp: Test of ``-o <offset>'' now works.

1999-12-16  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-var-cmd.exp: Fix 2 tests outputs.

        * mi-var-child.exp: Add many more tests.

        * mi-var-display.exp: Add many more tests.

        * var-cmd.c: Change type of incr_a parameter to char.

1999-12-15  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-var-block.exp: Set up xfails fro known problems.

        * mi-var-display.exp: Set up printing of values of 'e' and 'anone'
        as xfails.

        * mi-var-child.exp: Fix typos.

1999-12-15  Andrew Cagney  <cagney@b1.cygnus.com>

        * mi-var-child.exp: Space was missing before ``[10]''.

Wed Dec 15 19:23:38 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * mi-read-memory.exp: Add test for ``-o <offset>''.  Update checks
        and match next-row et.al.

1999-12-14  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-var-display.exp : New file. Tests for format and type, with
        unions, structs and enums.
        
        * mi-var-cmd.exp: Add some var-assign tests.

1999-12-14 Elena Zannoni <ezannoni@kwikemart.cygnus.com> 

        * mi-var-cmd.exp, mi-var-block.exp, mi-var-child.exp: New files
        some tests for -var* commands.

        * var-cmd.c: New source file for var-* commands tests.
        * gdb.mi/Makefile.in (PROGS): Add var-cmd.
        
Mon Dec 13 18:06:09 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * mi-break.exp: Fix quoting.  Changed "srcfile.c":6 to
        "\"srcfile.c\":6".
        * mi-simplerun.exp: Fix quoting.

Sat Dec 11 21:33:37 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * mi-simplerun.exp (exec-finish): Fix return value was zero,
        should have been three.

        * mi-disassemble.exp: Reduce number of wild card matches in
        * patterns.  Remove all numeric constants.

1999-12-09  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-eval.exp: New file. Some initial tests for
        -data-evaluate-expression.

1999-12-09  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * c_variable.c, cpp_variable.cc, cpp_variable.h: New files.  Used
        for testing "var" operations.
        * Makefile.in: Add reference to the above files.

1999-12-08  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-regs.exp: Fix test for format 'N' for
        data-list-register-values.

1999-12-07  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-disassemble.exp: Update expected output. Break test of
        disassembly in mixed mode into 2 functions.

        * mi-regs.exp: Initial register tests. Works only on sparc right
        now.

1999-12-02  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-stepi.exp: New file. Tests exec-step-instruction and
        exec-next-instruction.
        * mi-until.exp: New file. Tests exec-until.
        * until.c: New file.
        * mi-return.exp: New file. Tests exec-return.

Thu Dec  2 09:38:23 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * mi-hack-cli.exp: New test.  Check the hacked up access to the
        CLI.

Wed Dec  1 16:47:40 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * mi-basics.exp: Delete calls to mi_delete_breakpoints,
        mi_gdb_reinitialize_dir and mi_gdb_load.  This test is checking
        that these can work.

        * mi-support.exp (mi_step, mi_next, mi_run_to_main): New
        procedures.

        * mi-read-memory.exp, mi-read-memory.c: New files.  Test
        data-read-memory command.
        
Tue Nov 30 23:54:16 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * mi-support.exp: Don't start SID until after GDB has been started
        and verified.
        
Tue Nov 30 22:21:33 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * mi-support.exp (mi_uncatched_gdb_exit): When SID, call sid_exit.
        (mi_gdb_start): When SID, call sid_start.
        (mi_gdb_start): Add MIFLAGS to spawn-GDB command.  Check for
        HEADLESS gdb.  Return non-zero when GDB fails to start.
        (mi_gdb_load): When SID or SIM, download program.
        (mi_run_cmd): Don't do download here.  Assume target supports the
        00-exec-run command.
        (skip_mi_tests, setup_gdbmi, unset_gdbmi): Delete.  Merged into
        mi_gdb_start.

        * mi-basics.exp, mi-break.exp, mi-console.exp, mi-disassemble.exp,
        mi-simplerun.exp, mi-watch.exp: Update.  Check status from
        mi_gdb_start indicating that GDB started correctly.

Tue Nov 30 15:22:08 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * mi-support.exp (setup_gdbmi, unset_gdbmi): New
        procedures.  Setup/unset dejagnu for mi tests.
        * mi-basics.exp, mi-console.exp, mi-simplerun.exp, mi-break.exp,
        mi-disassemble.exp, mi-watch.exp: Update.

1999-11-29  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-simplerun.exp (test_running_the_program): Remove XFAIL. The
        output is fixed now.
        (test_program_termination): Update output pattern.

Tue Nov 30 00:19:10 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * mi-console.c, mi-console.exp: New files. Test console output.

Mon Nov 29 17:59:13 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * mi-support.exp (mi_run_command): Check for exec-run command
        failure due to MI not having an active target.
        (mi_run_command): Check for and handle a builtin simulator target.
        (mi_run_command): Don't check/handle for ``The program has been
        started already'', not a valid MI response.
        
        * mi-simplerun.exp (test_running_the_program): Update all patterns
        to match async output.
        (test_running_the_program): Mark ``step to callee4'' as XFAIL.  MI
        output contains {,reason="end-stepping-range"}+.

        * mi-simplerun.exp: Limit the timeout for ``step to callee4'' to
        30 seconds.

Mon Nov 29 17:30:00 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * mi-support.exp (skip_mi_tests): Print UNTESTED when MI interface
        isn't available.  Start/stop instead of assuming GDB is running.
        (MIFLAGS): Define.
        * mi-simplerun.exp, mi-disassemble.exp, mi-break.exp,
        mi-basics.exp, mi-watch.exp: Update.

1999-11-26  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * mi-simplerun.exp: Move break-insert {-t, -r} from here.
        * mi-break.exp: To here. New file.
        * mi-watch.exp: New file. Tests for watchpoints.

Wed Nov 24 17:42:07 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdb.mi/ChangeLog-mi: MI entries moved to here.

Wed Nov 24 17:31:04 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * gdb.mi/mi-basics.exp, gdb.mi/mi-disassemble.exp,
        gdb.mi/mi-simplerun.exp: Print warning message when test isn't
        run.

1999-11-23  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * gdb.mi/mi-simplerun.exp: Update output of break-list to account for
        "times" field.

1999-11-05  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * gdb.mi/mi-simplerun.exp: Add tests for temporary breakpoints
        and bp based on regular expressions.
        * gdb.mi/mi-disassemble.exp: Fix typo.

1999-11-04  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * gdb.mi/mi-disassemble.exp: Update output of execution commands
        to reflect new 'reason' field.
        * gdb.mi/mi-simplerun.exp: Ditto.

1999-10-25  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * gdb.mi/mi-simplerun.exp: Add more stack-list-frames tests.

        * gdb.mi/mi-disassemble.exp: Update 'run to main' output.  

        * gdb.mi/mi-simplerun.exp: Update execution commands
        output. Update backtrace output.
        
1999-10-18  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * gdb.mi/mi-disassemble.exp: Add new tests for the new
        disassembly command parameter, number of lines.

Mon Oct 11 13:57:21 1999  Andrew Cagney  <cagney@amy.cygnus.com>

        * lib/mi-support.exp: Break complicated gdb_expect containing
        exp_continue into a while within an expect.  Don't attempt a start
        more than three times.  Check return value from gdb_load.
        
1999-10-06  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>

        * gdb.mi/mi-disassemble.exp: New file.

Wed Oct  6 12:05:58 1999  Andrew Cagney  <cagney@b1.cygnus.com>

        * lib/mi-support.exp (mi_run_cmd): Give up after two restart
        attempts.

1999-09290  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * gdb.mi/mi-basics.exp: Update to current syntax and output formats.
        * gdb.mi/mi-simplerun.exp: Ditto.
        * lib/mi-support.exp (mi_delete_breakpoints): Ditto.

1999-06-30  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * gdb.mi/basics.c (main): Fix return code.  Add a print "Hello,
        World".
        * gdb.mi/mi-basics.exp: Fix message texts and numbering.
        * gdb.mi/mi-simplerun.exp: Ditto. Also, add new tests and improve
        some patterns.

1999-06-30  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * lib/mi-support.exp (mi_gdb_reinitialize_dir): Remove query as an
        acceptable response to the environment-dir command.

1999-06-30  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * lib/mi-support.exp (mi_delete_breakpoints): Remove references to
        gdb-cli.
        (mi_run_cmd): Ditto.

1999-06-25  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * lib/mi-support.exp (skip_mi_tests): Use gdb-version to check for
        headless output format.

1999-06-24  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * gdb.mi/mi-simplerun.exp (test_controlled_execution): Add global
        spec for hex.

1999-06-24  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * lib/mi-support.exp (mi_run_cmd): Fix pattern and add a timeout
        clause.

1999-06-24  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * lib/mi-support.exp: Use mi_gdb_prompt instead of a modified
        gdb_prompt.  Remove uneeded loading of libgloss.
        (mi_gdb_exit): Remove prompt argument.
        (mi_uncatched_gdb_exit): Ditto.
        (mi_run_cmd): New proc. MI version of gdb_run.
        (skip_mi_tests): New proc. Check if gdb is capable of producing
        headless formatted output.
        * gdb.mi/mi-basics.exp: Use mi_gdb_prompt instead of a modified
        gdb_prompt.  Eliminate parameter to mi_gdb_exit (as a result of
        the above).  Test for skip_mi_tests before running.
        Note: The above changes are interelated (need each other).
        * gdb.mi/mi-simplerun.exp: Same changes as for mi-basics.exe
        above.
        (test_breakpoint_creation_and_listing): Remove insertion of
        breakpoint at callee1 (and renumber tokens). Add tests for
        break-list, break-disable and break-info.
        (test_running_the_program): Use mi_run_cmd so it can run on remote
        targets.
        (test_controlled_execution): Fix broken test.
        (test_program_termination): Test implemented.
        * gdb.mi/basic.c (main): Small change to allow for testing of both
        exec-next and exec-step operations.

1999-06-22  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * lib/mi-support.exp (mi_gdb_test): New proc.  MI version of gdb_test.
        * gdb.mi/mi-basics.exp: Use the above instead of gdb_test.
        * gdb.mi/mi-simplerun.exp: Ditto.

1999-06-22  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * gdb.mi/mi-simplerun.exp: New file. Tests simple debugging tasks. 
        * gdb.mi/mi-basics.exp: Remove tests moved to above new file.
        * lib/mi-support.exp: New file.  Support procedures for mi tests.

1999-06-08  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * gdb.mi/mi-basics.exp: Skip all tests if the MI interpreter is
        not active.

1999-06-03  Fernando Nasser  <fnasser@totem.to.cygnus.com>

        * gdb.mi: New directory.
        * configure.in: Configure it.
        * configure: Regenerate.
        * gdb.mi/{Makefile.in,configure.in,configure}: New files.
        * gdb.mi/{mi-basics.exp,basics.c,testcmds}: New files.


Local Variables:
mode: indented-text
left-margin: 8
fill-column: 74
version-control: never
End:

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.