OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [gdb-5.0/] [gdb/] [testsuite/] [gdb.mi/] [mi-simplerun.exp] - Rev 106

Go to most recent revision | Compare with Previous | Blame | View Log

#   Copyright (C) 1999, 2000 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  

# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu

#
# Test essential Machine interface (MI) operations
#
# Verify that, using the MI, we can run a simple program and perform basic
# debugging activities like: insert breakpoints, run the program,
# step, next, continue until it ends and, last but not least, quit.
#
# The goal is not to test gdb functionality, which is done by other tests,
# but to verify the correct output response to MI operations.
#

load_lib mi-support.exp

gdb_exit
if [mi_gdb_start] {
    continue
}

set testfile "basics"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}
if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } {
     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}

mi_delete_breakpoints
mi_gdb_reinitialize_dir $srcdir/$subdir
mi_gdb_reinitialize_dir $srcdir/$subdir
mi_gdb_load ${binfile}

proc test_breakpoints_creation_and_listing {} {
    global mi_gdb_prompt
    global srcfile
    global hex

    # Insert some breakpoints and list them
    # Also, disable some so they do not interfere with other tests
    # Tests:
    # -break-insert
    # -break-list
    # -break-disable
    # -break-info

    mi_gdb_test "200-break-insert main" \
             "200\\^done,bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",line=\"32\",times=\"0\"\}" \
             "break-insert operation"

    mi_gdb_test "201-break-insert basics.c:callee2" \
             "201\\^done,bkpt=\{number=\"2\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"callee2\",file=\".*basics.c\",line=\"22\",times=\"0\"\}" \
             "insert breakpoint at basics.c:callee2"

    mi_gdb_test "202-break-insert basics.c:15" \
             "202\\^done,bkpt=\{number=\"3\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"callee3\",file=\".*basics.c\",line=\"15\",times=\"0\"\}" \
             "insert breakpoint at basics.c:15 (callee3)"

    mi_gdb_test "203-break-insert \"\\\"${srcfile}\\\":6\"" \
             "203\\^done,bkpt=\{number=\"4\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"callee4\",file=\".*basics.c\",line=\"6\",times=\"0\"\}" \
             "insert breakpoint at \"<fullfilename>\":6 (callee4)"

    mi_gdb_test "204-break-list" \
                "204\\^done,BreakpointTable=\{hdr=\{.*\},bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",line=\"32\",times=\"0\"\},.*\}\}" \
                "list of breakpoints"

    mi_gdb_test "205-break-disable 2 3 4" \
                "205\\^done.*" \
                "disabling of breakpoints"

    mi_gdb_test "206-break-info 2" \
                "206\\^done,BreakpointTable=\{hdr=\{.*\},bkpt=\{number=\"2\",.*,enabled=\"n\",.*\}\}" \
                "list of breakpoints, 16 disabled"
}

proc test_running_the_program {} {
    global mi_gdb_prompt
    global hex

    # Run the program without args, then specify srgs and rerun the program
    # Tests:
    # -exec-run
    # -gdb-set

    # mi_gdb_test cannot be used for asynchronous commands because there are
    # two prompts involved and this can lead to a race condition.
    # The following is equivalent to a send_gdb "000-exec-run\n"
    mi_run_cmd
    gdb_expect {
        -re "000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"1\",thread-id=\"0\",frame=\{addr=\"$hex\",func=\"main\",args=\{\},file=\".*basics.c\",line=\"32\"\}\r\n$mi_gdb_prompt$" {
            pass "run to main"
        }
        timeout {
            fail "run to main (timeout)"
        }
    }
}

proc test_controlled_execution {} {
    global mi_gdb_prompt
    global hex

    # Continue execution until a breakpoint is reached, step into calls, verifying
    # if the arguments are correctly shown, continue to the end of a called
    # function, step over a call (next).
    # Tests:
    # -exec-continue
    # -exec-next
    # -exec-step
    # -exec-finish

    # mi_gdb_test cannot be used for asynchronous commands because there are
    # two prompts involved and this can lead to a race condition.
    send_gdb "220-exec-next\n"
    gdb_expect {
        -re "220\\^running\r\n${mi_gdb_prompt}220\\*stopped,reason=\"end-stepping-range\",thread-id=\"0\",frame=\{addr=\"$hex\",func=\"main\",args=\{\},file=\".*basics.c\",line=\"33\"\}\r\n$mi_gdb_prompt$" {
            pass "next at main"
        }
        timeout {
            fail "next at main (timeout)"
        }
    }

    # FIXME: A string argument is not printed right; should be fixed and
    #        we should look for the right thing here.
    # NOTE: The ``\\\\\"'' is for \".
    send_gdb "221-exec-step\n"
    gdb_expect {
        -re "221\\^running\r\n${mi_gdb_prompt}221\\*stopped,reason=\"end-stepping-range\",thread-id=\"0\",frame=\{addr=\"$hex\",func=\"callee1\",args=\{\{name=\"intarg\",value=\"2\"\},\{name=\"strarg\",value=\"$hex \\\\\"A string argument\.\\\\\"\"\},\{name=\"fltarg\",value=\"3.5\"\}\},file=\".*basics.c\",line=\"27\"\}\r\n$mi_gdb_prompt$" {
            pass "step at main"
        }
        timeout {
            fail "step at main (timeout)"
        }
    }

    # FIXME: A string argument is not printed right; should be fixed and
    #        we should look for the right thing here.
    send_gdb "222-exec-step 3\n"
    gdb_expect 30 {
        -re "222\\^running\r\n${mi_gdb_prompt}222\\*stopped,reason=\"end-stepping-range\",thread-id=\"0\",frame=\{addr=\"$hex\",func=\"callee4\",args=\{\},file=\".*basics.c\",line=\"8\"\}\r\n$mi_gdb_prompt$" {
            pass "step to callee4"
        }
        timeout {
            fail "step to callee4 (timeout)"
        }
    }

    # FIXME: A string argument is not printed right; should be fixed and
    #        we should look for the right thing here.
    # NOTE: The ``.'' is part of ``gdb-result-var="$1"''
    send_gdb "223-exec-finish\n"
    gdb_expect 30 {
        -re "223\\^running\r\n${mi_gdb_prompt}223\\*stopped,reason=\"function-finished\",thread-id=\"0\",frame=\{addr=\"$hex\",func=\"callee3\",args=\{.*\},file=\".*basics.c\",line=\"18\"\},gdb-result-var=\".1\",return-value=\"0\"\r\n$mi_gdb_prompt$" {
            pass "exec-finish"
        }
        timeout {
            fail "exec-finish (timeout)"
        }
    }
}

proc test_controlling_breakpoints {} {
    global mi_gdb_prompt

    # Enable, delete, set ignore counts in breakpoints
    # (disable was already tested above)
    # Tests:
    # -break-delete
    # -break-enable
    # -break-after
    # -break-condition

}

proc test_program_termination {} {
    global mi_gdb_prompt

    # Run to completion: normal and forced
    # Tests:
    # -exec-abort
    # (normal termination of inferior)

    # FIXME: "stopped" doesn't seem appropriate.
    # mi_gdb_test cannot be used for asynchronous commands because there are
    # two prompts involved and this can lead to a race condition.
    send_gdb "999-exec-continue\n"
    gdb_expect {
      -re "999\\^running\r\n$mi_gdb_prompt" {
        gdb_expect {
          -re "999\\*stopped,reason=\"exited-normally\"\r\n$mi_gdb_prompt$" {
            pass "continue to end"
          }
          -re ".*$mi_gdb_prompt$" {fail "continue to end (2)"}
          timeout {fail "continue to end (timeout 2)"}
        }
      }
      -re ".*$mi_gdb_prompt$" {fail "continue to end (1)"}
      timeout {fail "continue to end (timeout 1)"}
    }
}

test_breakpoints_creation_and_listing
test_running_the_program
test_controlled_execution
test_controlling_breakpoints
test_program_termination

mi_gdb_exit
return 0

# Local variables: 
# change-log-default-name: "ChangeLog-mi"
# End: 


Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.